Download or read book Sustainable Manufacturing and Design written by Kaushik Kumar and published by Woodhead Publishing. This book was released on 2021-01-08 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Manufacturing and Design draws together research and practices from a wide range of disciplines to help engineers design more environmentally sustainable products. Sustainable manufacturing requires that the entire manufacturing enterprise adopts sustainability goals at a system-level in decision-making, hence the scope of this book covers a wide range of viewpoints in response. Advice on recyclability, zero landfill design, sustainable quality systems, and product take-back issues make this a highly usable guide to the challenges facing engineering designers today. Contributions from around the globe are included, helping to form an international view of an issue that requires a global response. Addresses methods to reduce energy and material waste through manufacturing design Helps to troubleshoot manufacturability problems that can arise in sustainable design Includes coverage of the legislative, cultural and social impacts of sustainable manufacturing, promoting a holistic view of the subject

Download or read book Sustainable Machining written by J. Paulo Davim and published by Springer. This book was released on 2017-03-19 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview on current sustainable machining. Its chapters cover the concept in economic, social and environmental dimensions. It provides the reader with proper ways to handle several pollutants produced during the machining process. The book is useful on both undergraduate and postgraduate levels and it is of interest to all those working with manufacturing and machining technology.

Download or read book Sustainable Manufacturing written by Kapil Gupta and published by Elsevier. This book was released on 2021-03-30 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Manufacturing examines the overall sustainability of a wide range of manufacturing processes and industrial systems. With chapters addressing machining, casting, additive and gear manufacturing processes; and hot topics such as remanufacturing, life cycle engineering, and recycling, this book is the most complete guide to this topic available. Drawing on experts in both academia and industry, coverage addresses theoretical developments and practical improvements from research and innovations. This unique book will advise readers on how to achieve sustainable manufacturing processes and systems, and further the clean and safe environment. This handbook is a part of the four volume set entitled Handbooks in Advanced Manufacturing. The other three address Advanced Machining and Finishing, Advanced Welding and Deforming, and Additive Manufacturing. Provides basic to advanced level information on various aspects of sustainable manufacturing Presents the strategies and techniques to achieve sustainability in numerous areas of manufacturing and industrial engineering such as environmentally benign machining, sustainable additive manufacturing, remanufacturing and recycling, sustainable supply chain, and life cycle engineering Combines contributions from experts in academia and industry with the latest research and case studies Explains how to attain a clean, green, and safe environment via sustainable manufacturing Presents recent developments and suggests future research directions

Download or read book Sustainable Manufacturing written by Rainer Stark and published by Springer. This book was released on 2017-01-16 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume presents the research results of the Collaborative Research Center 1026 “Sustainable manufacturing - shaping global value creation”. The book aims at providing a reference guide of sustainable manufacturing for researchers, describing methodologies for development of sustainable manufacturing solutions. The volume is structured in four chapters covering the following topics: sustainable manufacturing technology, sustainable product development, sustainable value creation networks and systematic change towards sustainable manufacturing. The target audience comprises both researchers and practitioners in the field of sustainable manufacturing, but the book may also be beneficial for graduate students.

Download or read book Innovation and Sustainable Manufacturing written by Carolina Machado and published by Elsevier. This book was released on 2022-09-29 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovation and Sustainable Manufacturing: Research and Development addresses the manufacturing sustainability challenge from different points of view, drawing on research from different disciplines to shed light on the latest green technologies, green product design methods, and materials. Addressing the needs of practitioners as well as academics, this book examines a range of important themes such as environmental impacts and how to assess them, how to set boundary conditions to include or exclude downstream supply chains, how to improve sustainability without sacrificing productivity, the cost benefits of sustainability, and how to trace impacts in manufacturing. By providing a thorough review of global research in this field, Innovation and Sustainable Manufacturing acts as an ideal entry point into this discipline for researchers, and a guide to the latest developments for forward-thinking practitioners. Covers how different stages of the manufacturing supply chain can impact on sustainability Combines research from a variety of disciplines to provide a comprehensive coverage of this complex subject Explores the relationship between sustainability and other goals such as productivity, quality, and profitability

Download or read book Sustainable Design and Manufacturing written by Steffen G. Scholz and published by Springer Nature. This book was released on 2021-09-17 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of peer-reviewed papers, presented at the International Conference on Sustainable Design and Manufacturing (SDM 2021). Leading-edge research into sustainable design and manufacturing aims to enable the manufacturing industry to grow by adopting more advanced technologies and at the same time improve its sustainability by reducing its environmental impact. Relevant themes and topics include sustainable design, innovation and services; sustainable manufacturing processes and technology; sustainable manufacturing systems and enterprises; and decision support for sustainability. Application areas are wide and varied. The book will provide an excellent overview of the latest developments in the sustainable design and manufacturing area.

Download or read book Sustainable Design and Manufacturing 2017 written by Giampaolo Campana and published by Springer. This book was released on 2017-04-25 with total page 929 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes papers presented at the 4th International Conference on Sustainable Design and Manufacturing (SDM-17) held in Bologna, Italy, in April 2017. The conference covered a wide range of topics from cutting-edge sustainable product design and service innovation, sustainable processes and technology for the manufacturing of sustainable products, sustainable manufacturing systems and enterprises, decision support for sustainability, and the study of the societal impact of sustainability including research for circular economy. Application areas are wide and varied, and the book provides an excellent overview of the latest research and development in the area of Sustainable Design and Manufacturing.

Download or read book Sustainability in Manufacturing Enterprises written by Ibrahim Garbie and published by Springer. This book was released on 2016-02-24 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores sustainability within manufacturing enterprises and examines the concepts and principles of this field. It also reviews the quantitative and qualitative tools available for analytic assessment. It presents a new framework for sustainable manufacturing requirements and discusses the implementation of sustainable manufacturing in terms of practices, indicators, and sustainability level assessments. The book also details the important conditions necessary for the conversion of existing traditional plants to ones with more sustainable processes. Chapters explore topics including the assessment of economic sustainability, social sustainability, environmental sustainability, sustainable manufacturing practices, and sustainability optimization. Serving as a reference for engineers, managers, and practitioners involved in manufacturing, this book will also be a valuable resource to students and researchers of industrial engineering, manufacturing engineering, systems engineering, and operations management.

Download or read book Materials Design and Manufacturing for Sustainable Environment written by Santhakumar Mohan and published by Springer Nature. This book was released on 2021-02-06 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the select proceedings of the International Conference on Materials, Design and Manufacturing for Sustainable Environment (ICMDMSE 2020). The primary focus is on emerging materials and cutting-edge manufacturing technologies for sustainable environment. The book covers a wide range of topics such as advanced materials, vibration, tribology, finite element method (FEM), heat transfer, fluid mechanics, energy engineering, additive manufacturing, robotics and automation, automobile engineering, industry 4.0, MEMS and nanotechnology, optimization techniques, condition monitoring, and new paradigms in technology management. Contents of this book will be useful to students, researchers, and practitioners alike.

Download or read book Sustainable Design and Manufacturing 2016 written by Rossi Setchi and published by Springer. This book was released on 2016-04-02 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volumes consists of 59 peer-reviewed papers, presented at the International Conference on Sustainable Design and Manufacturing (SDM-16) held in Chania, Crete Greece in April 2016. Leading-edge research into sustainable design and manufacturing aims to enable the manufacturing industry to grow by adopting more advanced technologies, and at the same time improve its sustainability by reducing its environmental impact. SDM-16 covers a wide range of topics from sustainable product design and service innovation, sustainable process and technology for the manufacturing of sustainable products, sustainable manufacturing systems and enterprises, decision support for sustainability, and the study of societal impact of sustainability including research for circular economy. Application areas are wide and varied. The book will provide an excellent overview of the latest research and development in the area of Sustainable Design and Manufacturing.

Download or read book Sustainable Manufacturing Processes written by R. Ganesh Narayanan and published by Academic Press. This book was released on 2022-10-08 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Manufacturing Processes provides best practice advice on sustainable manufacturing methods, with examples from industry as well as important supporting theory. In the current manufacturing industry, processes and materials are developed with close reference to sustainability issues, with an outward look to optimum production efficiency and reduced environmental impact. Important topics such as the use of renewable energy, reduction of material waste and recycling, reduction in energy and water consumption, and reduction in emissions are all discussed, along with broad coverage of deformation and joining technologies, computational techniques, and computer-aided engineering. In addition, a wide range of traditional and innovative manufacturing technologies are covered, including friction stir welding, incremental forming, abrasive water jet machining, laser beam machining, sustainable foundry, porous material fabrication by powder metallurgy, laser and additive manufacturing, and thermoelectric and thermomagnetic energy harvesting. Features practical case studies from industry experts Explains methods for reducing waste in additive manufacturing Provides a detailed examination on how sustainability is measured in manufacturing

Download or read book Sustainable Manufacturing written by S. Vinodh and published by CRC Press. This book was released on 2020-10-26 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainability enables the development of products with minimal environment impact coupled with economical and societal benefits. This book provides an understanding of theoretical and practical perspectives pertaining to Sustainable manufacturing. This book focuses on fundamentals, providing insights, concepts, tools, methods, case studies, and practical perspectives taken from research. The book will be of interest to students, researchers and industry practitioners.

Download or read book Sustainability Engineering written by Jeffery Perl and published by Springer. This book was released on 2016-07-07 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores sustainability engineering through the lens of the manufacturing and chemical process industries to elucidate the safe and economic implementation of process designs used to transform raw materials into useful finished products. The author applies the tenets of sustainability science to develop an engineering methodology that supports the perpetual availability of raw materials through recycling/reuse/repurposing, incorporates inexhaustible supplies, such as solar energy and municipal waste, and encompasses the husbandry of these resources in a manner that minimizes negative environmental impacts. Anyone involved in the design or manufacture of chemicals, or the upgrade of existing manufacturing processes, will benefit from this book’s suggestions for identifying improvement options, while adding the pivotal aspect of sustainability to the usual cost and safety equation optimization elements.

Download or read book Advances in Sustainable Manufacturing written by Günther Seliger and published by Springer Science & Business Media. This book was released on 2011-05-27 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-renewable materials can no longer be disposed once humankind's ever increasing needs cannot be fulfilled anymore due to limited resources. Reuse and recycling become inevitable requirements for product and process design. Renewable resources must not be consumed in quantities higher than can be regained. New technologies have to be developed and applied for a Sustainable Product Development and Life Cycle Engineering to fulfill the needs of humankind, protecting public health, welfare, and environment. The 8th Global Conference on Sustainable Manufacturing brings together some of the world’s leading experts to present a scientific conference in Abu Dhabi, one of the world’s fastest growing economies and a global leader in the development of sustainable technologies. The conference will focus on 7 areas: Value adding by sustainable manufacturing in the UAE Potentials of renewables Education for sustainability engineering Green supply chain and transportation Microelectronics and resource efficiency Technology driven startups Sustainable products and manufacturing processes

Download or read book Print and Production Finishes for Sustainable Design written by Edward Denison and published by Rotovision. This book was released on 2009 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Print and Production Finishes for Sustainable Design is an indispensable ideas sourcebook and practical guide to what has become an important consideration for many designers: sustainability. The book shows examples of environmentally friendly inks, varnishes, pigments, and finishes that can be used in a wide range of standard printed media. Printing innovations and specialized printing techniques using environmentally friendly ingredients are also included. The book provides an overview of different printable materials available to both 2-D and 3-D designers, including recyclable paper, paper substitutes, and biodegradable plastics. Innovative 3-D designs that demonstrate clear environmental benefits derived from the application of printing, types of manufacturing techniques or use of specific materials are showcased and explained. Environmentally sound printing and production finishes are often one of the outcomes of a lengthy design process by companies dedicated to reducing their impact on the environment. Print and Production Finishes for Sustainable Design includes case studies of companies where the entire organizational objective is based on achieving organizational sustainability (i.e. zero net impact) and where printing and production processes have been integral to achieving this.

Download or read book Design of Sustainable Product Life Cycles written by Jörg Niemann and published by Springer Science & Business Media. This book was released on 2008-09-27 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Life cycle design is understood as "to develop" (to plan, to calculate, to define, to draw) a holistic concept for the entire life cycle of a product". Life cycle design means a one time planning during the concept phase of a product in which the pathway of a product over the entire life cycle is determined. So e.g. the planning of possible services for a product during its utilization phase, the way of material recycling, how and which parts can be reused, how the logistics for recycling will be organised or how the product can be used afterwards. So it is a conceptual pre-design of all later activities over the life cycle. By this understanding the book delivers a really holistic approach because before a product is physically made a life-long concept and utilization scenarios with closed material and information cycles have to be developed. This promotes a real "thinking in product (life) cycles". The book addresses professionals as well as researchers and students in the field of product life cycle management. Different methods in the field of product design, operation and recycling will be presented and finally merge to an integrated method of product life cycle design. Readers will benefit from the holistic approach which enables them to design successful products by the implementation of closed loop product life cycles.

Download or read book Sustainable Design and Manufacturing 2019 written by Peter Ball and published by Springer. This book was released on 2019-06-27 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume consists of 52 peer-reviewed papers, presented at the International Conference on Sustainable Design and Manufacturing (SDM-19) held in Budapest, Hungary in July 2019. Leading-edge research into sustainable design and manufacturing aims to enable the manufacturing industry to grow by adopting more advanced technologies, and at the same time improve its sustainability by reducing its environmental impact. The topic includes the sustainable design of products and services; the sustainable manufacturing of all products; energy efficiency in manufacturing; innovation for eco-design; circular economy; industry 4.0; industrial metabolism; automotive and transportation systems. Application areas are wide and varied. The book will provide an excellent overview of the latest developments in the Sustainable Design and Manufacturing Area.