Download or read book Sustainable Drying Technologies written by Jorge Del Real Olvera and published by . This book was released on 2016-08-31 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sustainable Food Drying Techniques in Developing Countries Prospects and Challenges written by Mahadi Hasan Masud and published by Springer Nature. This book was released on 2020-05-08 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive review of renewable energy-based sustainable drying techniques for developing countries. Aspiring towards a world with zero food waste, the book has provided discussion on sustainable drying techniques in terms of energy efficiency. The socio-economic condition of each developing country is unique; therefore, has specific technological requirements. As such, the book presents discussions on food waste scenario around the world, the socio-economic status of developing countries and their correlation with food. The book gives an overview of the quality aspects of drying, along with the required energy and time to retain these features. Additionally, a method of selecting drying techniques for developing countries, taking the cost and safety factor into consideration, has been discussed extensively Also, the renewable and non-renewable energy resources of low income, lower-middle income, middle income, and high-income developing countries have been analyzed and presented. The book also highlights the available drying techniques that are currently being practiced by the consumers and industries of developing countries. The book recommends ten sustainable drying technologies for the developing countries and describes their working principle. Discussion on potential challenges for sustainable drying technology adoption is also presented. The book presents up-to-date research on sustainable drying techniques and their impact on developing countries to reduce food waste. Food waste is not only a humanitarian concern but also a threat to environmental sustainability. Currently, one-third of all produced food is being wasted, when nearly 805 million people - including children remain undernourished on a daily basis. In an effort to solve this crisis, a number of food preservations techniques are being practiced in food supply chain. Drying is one such preservation technique that prevents microbial proliferation, slows enzymatic reaction and preserves the physio-chemical properties of food. Albeit, drying is an effective means of food preservation; it is also highly energy-intensive. Developing countries do not have sufficient energy and financial resources to adopt conventional (expensive and high energy) drying techniques. As such, this is the first reference work dedicated to discussing the prospects and challenges of sustainable (renewable energy based and inexpensive) drying techniques for developing countries in order to reduce food waste. Sustainable food drying techniques in developing countries: Prospects and Challenges is a singular work in the field of food preservation and affordable drying technology.
Download or read book Sustainable Drying Technologies for the Development of Functional Foods and Preservation of Bioactive Compounds written by Ester Betoret and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays, the sustainability of a product, a process or a system is assessed according to three dimensions: environmental, social and economic. Sustainability challenges occur at all stages in the food system from production through processing, distribution and retailing to consumption and waste disposal. The promotion of organic and local food is not the only way to reach the sustainability. There is other possibility that implies to continue the production hegemony. Increasing research is being focused on the development of healthy, quality and safety food products adapted to consumer's needs and more environment-friendly processes, that is, processes consuming energy more efficiently, generating less waste and emitting less greenhouse effect gases. Drying technology is applied in the food industry not only for preservation but also to manufacture foods with certain characteristics. Drying technology operations need to be precisely controlled and optimized in order to produce a good-quality product with the highest level of nutrient retention and flavor together with microbial safety. This chapter contains detailed information about some measurements taken by the food industry to ensure the supply of bioactive nutrients to as many individuals as possible, assuring the global sustainability. More specifically, the contribution of some drying techniques employed in the development of functional foods to increase the sustainability of the feeding process is discussed.
Download or read book Solar Drying Technology written by Om Prakash and published by Springer. This book was released on 2017-08-29 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive reference guide to the latest developments and advances in solar drying technology, covering the concept, design, testing, modeling, and economics of solar drying technologies, as well as their impact on the environment. The respective chapters are based on the latest studies conducted by reputed international researchers in the fields of solar energy and solar drying. Offering a perfect blend of research and practice explained in a simple manner, the book represents a valuable resource for researchers, students, professionals, and policymakers working in the field of solar drying and related agricultural applications.
Download or read book Drying Technologies For Foods written by Prabhat K Nema and published by New India Publishing Agency. This book was released on 2020-10-10 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drying is an important unit operation used in the industry for processing and preservation of food products. Food industry always looks for cost effective and energy efficient drying techniques to commercially succeed in their ventures and to fulfill demand of high quality dried food products. Although a large volume of technical literature is available on drying of foods, it is still quite challenging for scientists and engineers to improve upon the existing drying systems and quality of the products. The book consists of 14 chapters detailing freeze drying, atmospheric freeze drying, swell drying, multi-flash drying, electro-hydrodynamic drying, pulse combustion drying, foam mat drying, ultrasound- assisted drying and fluidized bed drying. It also includes chapters which are commodity-specific such as mushroom drying, drying and roasting of cocoa and coffee beans. The degradation mechanism and kinetics of vitamin C degradation in fruits and vegetables, kinetics modeling of drying process for the recovery of bioactive compounds and energy calculation procedures for dryers is also covered which would be helpful to improve dryer operation and efficiency.
Download or read book Advances in Drying written by Arun S. Mujumdar and published by CRC Press. This book was released on with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Drying Technologies in Food Processing written by Xiao Dong Chen and published by John Wiley & Sons. This book was released on 2009-03-16 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drying is by far the most useful large scale operation method of keeping solid foods safe for long periods of time, and is of fundamental importance in most sectors of food processing. Drying operations need to be precisely controlled and optimized in order to produce a good quality product that has the highest level of nutrient retention and flavor whilst maintaining microbial safety. This volume provides an up to date account of all the major drying technologies employed in the food industry and their underlying scientific principles and effects. Various equipment designs are classified and described. The impact of drying on food properties is covered, and the micro-structural changes caused by the process are examined, highlighting their usefulness in process analysis and food design. Key methods for assessing food properties of dried products are described, and pre-concentration and drying control strategies are reviewed. Thermal hazards and fire/explosion detection and prevention for dryers are discussed in a dedicated chapter. Where appropriate, sample calculations are included for engineers and technologists to follow. The book is directed at food scientists and technologists in industry and research, food engineers and drying equipment manufacturers.
Download or read book Handbook of Industrial Drying written by Arun S. Mujumdar and published by CRC Press. This book was released on 2006-11-08 with total page 1310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Still the Most Complete, Up-To-Date, and Reliable Reference in the FieldDrying is a highly energy-intensive operation and is encountered in nearly all industrial sectors. With rising energy costs and consumer demands for higher quality dried products, it is increasingly important to be aware of the latest developments in industrial drying technolog
Download or read book Green Food Processing Techniques written by Farid Chemat and published by Academic Press. This book was released on 2019-07-26 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Green Food Processing Techniques: Preservation, Transformation and Extraction advances the ethics and practical objectives of "Green Food Processing" by offering a critical mass of research on a series of methodological and technological tools in innovative food processing techniques, along with their role in promoting the sustainable food industry. These techniques (such as microwave, ultrasound, pulse electric field, instant controlled pressure drop, supercritical fluid processing, extrusion...) lie on the frontier of food processing, food chemistry, and food microbiology, and are thus presented with tools to make preservation, transformation and extraction greener. The Food Industry constantly needs to reshape and innovate itself in order to achieve the social, financial and environmental demands of the 21st century. Green Food Processing can respond to these challenges by enhancing shelf life and the nutritional quality of food products, while at the same time reducing energy use and unit operations for processing, eliminating wastes and byproducts, reducing water use in harvesting, washing and processing, and using naturally derived ingredients. - Introduces the strategic concept of Green Food Processing to meet the challenges of the future of the food industry - Presents innovative techniques for green food processing that can be used in academia, and in industry in R&D and processing - Brings a multidisciplinary approach, with significant contributions from eminent scientists who are actively working on Green Food Processing techniques
Download or read book Advanced Drying Technologies for Foods written by Arun S Mujumdar and published by CRC Press. This book was released on 2019-06-19 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of all drying research and development is to develop cost-effective innovative processes that yield high-quality dried products with less energy consumption and reduced environmental impact. With the literature on drying widely scattered, Advanced Drying Technologies for Foods compiles under one cover concise, authoritative, up-to-date assessments of modern drying technologies applied to foods. This book assembles a number of internationally recognized experts to provide critical reviews of advanced drying technologies, their merits and limitations, application areas and research opportunities for further development. Features: Provides critical reviews of advanced drying technologies Discusses the merits and limitations of a variety of food drying technologies Explains drying kinetics, energy consumption and quality of food products Reviews the principles and recent applications of superheated steam drying The first four chapters deal with recent developments in field-assisted drying technologies. These include drying techniques with the utilization of electromagnetic fields to deliver energy required for drying, for example, microwave drying, radio frequency drying, electrohydrodynamic drying, and infrared radiation drying. The remainder of this book covers a wide assortment of recently developed technologies, which include pulse drying, swell drying, impinging stream drying, and selected advances in spray drying. The final chapter includes some innovative technologies which are gaining ground and are covered in depth in a number of review articles and handbooks, and hence covered briefly in the interest completeness. This book is a valuable reference work for researchers in academia as well as industry and will encourage further research and development and innovations in food drying technologies.
Download or read book Green Technologies in Food Production and Processing written by Joyce Boye and published by Springer Science & Business Media. This book was released on 2012-01-11 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will review the current status of the agriculture and agri-food sector in regard to green processing and provide strategies that can be used by the sector to enhance the use of environmentally-friendly technologies for production, processing. The book will look at the full spectrum from farm to fork beginning with chapters on life cycle analysis and environmental impact assessment of different agri-food sectors. This will be followed by reviews of current and novel on-farm practices that are more environmentally-friendly, technologies for food processing that reduce chemical and energy use and emissions as well as novel analytical techniques for R&D and QA which reduce solvent, chemical and energy consumption. Technologies for waste treatment, "reducing, reusing, recycling", and better water and energy stewardship will be reviewed. In addition, the last section of the book will attempt to look at technologies and processes that reduce the generation of process-induced toxins (e.g., trans fats, acrylamide, D-amino acids) and will address consumer perceptions about current and emerging technologies available to tackle these processing and environmental issues.
Download or read book Development of Biopharmaceutical Drug Device Products written by Feroz Jameel and published by Springer Nature. This book was released on 2020-03-13 with total page 888 pages. Available in PDF, EPUB and Kindle. Book excerpt: The biotechnology/biopharmaceutical sector has tremendously grown which led to the invention of engineered antibodies such as Antibody Drug Conjugates (ADCs), Bispecific T-cell engager (BITES), Dual Variable Domain (DVD) antibodies, and fusion proteins that are currently being used as therapeutic agents for immunology, oncology and other disease conditions. Regulatory agencies have raised the bar for the development and manufacture of antibody-based products, expecting to see the use of Quality by Design (QbD) elements demonstrating an in-depth understanding of product and process based on sound science. Drug delivery systems have become an increasingly important part of the therapy and most biopharmaceuticals for self-administration are being marketed as combination products. A survey of the market indicates that there is a strong need for a new book that will provide “one stop shopping” for the latest information and knowledge of the scientific and engineering advances made over the last few years in the area of biopharmaceutical product development. The new book entitled Development of Biopharmaceutical Drug Device Products is a reference text for scientists and engineers in the biopharmaceutical industry, academia or regulatory agencies. With insightful chapters from experts in the field, this new book reviews first principles, covers recent technological advancements and provides case studies and regulatory strategies relating to the development and manufacture of antibody-based products. It covers topics such as the importance of early preformulation studies during drug discovery to influence molecular selection for development, formulation strategies for new modalities, and the analytical techniques used to characterize them. It also addresses important considerations for later stage development such as the development of robust formulations and processes, including process engineering and modeling of manufacturing unit operations, the design of analytical comparability studies, and characterization of primary containers (pre-filled syringes and vials).Finally, the latter half of the book reviews key considerations to ensure the development and approval of a patient-centered delivery system design. This involves the evolving regulatory framework with perspectives from both the US and EU industry experts, the role of international standards, design control/risk management, human factors and its importance in the product development and regulatory approval process, as well as review of the risk-based approach to bridging between devices used in clinical trials and the to-be-marketed device. Finally, case studies are provided throughout.The typical readership would have biology and/or engineering degrees and would include researchers, scientific leaders, industry specialists and technology developers working in the biopharmaceutical field.
Download or read book Advanced Drying Technologies written by Tadeusz Kudra and published by CRC Press. This book was released on 2009-02-11 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents Drying Breakthroughs for an Array of Materials Despite being one of the oldest, most energy-intensive unit operations, industrial drying is perhaps the least scrutinized technique at the microscopic level. Yet in the wake of today’s global energy crisis, drying research and development is on the rise. Following in the footsteps of the widely read first edition, Advanced Drying Technologies, Second Edition is the direct outcome of the recent phenomenal growth in drying literature and new drying hardware. This edition provides an evaluative overview of new and emerging drying technologies, while placing greater emphasis on making the drying process more energy efficient in the green age. Draws on the Authors’ 60+ Years of Combined Experience Fueled by the current energy crisis and growing consumer demand for improved quality products, this thoroughly updated resource addresses cutting-edge drying technologies for numerous materials such as high-valued, heat-sensitive pharmaceuticals, nutraceuticals, and some foods. It also introduces innovative techniques, such as heat-pump drying of foods, which allow both industrial practice and research and development projects to save energy, reduce carbon footprints, and thus improve the bottom line. Four New Chapters: Spray-Freeze-Drying Fry Drying Refractance Window Drying Mechanical Thermal Expression Requiring no prior knowledge of chemical engineering, this single-source reference should assist researchers in turning the laboratory curiosities of today into the revolutionary novel drying technologies of tomorrow.
Download or read book Spray Drying Techniques for Food Ingredient Encapsulation written by C. Anandharamakrishnan and published by John Wiley & Sons. This book was released on 2015-07-23 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spray drying is a well-established method for transforming liquid materials into dry powder form. Widely used in the food and pharmaceutical industries, this technology produces high quality powders with low moisture content, resulting in a wide range of shelf stable food and other biologically significant products. Encapsulation technology for bioactive compounds has gained momentum in the last few decades and a series of valuable food compounds, namely flavours, carotenoids and microbial cells have been successfully encapsulated using spray drying. Spray Drying Technique for Food Ingredient Encapsulation provides an insight into the engineering aspects of the spray drying process in relation to the encapsulation of food ingredients, choice of wall materials, and an overview of the various food ingredients encapsulated using spray drying. The book also throws light upon the recent advancements in the field of encapsulation by spray drying, i.e., nanospray dryers for production of nanocapsules and computational fluid dynamics (CFD) modeling. Addressing the basics of the technology and its applications, the book will be a reference for scientists, engineers and product developers in the industry.
Download or read book Drying in the Dairy Industry written by Cécile Le Floch-Fouéré and published by CRC Press. This book was released on 2020-11-25 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: With more than 12M tons of dairy powders produced each year at a global scale, the drying sector accounts to a large extent for the processing of milk and whey. It is generally considered that 40% of the dry matter collected overall ends up in a powder form. Moreover, nutritional dairy products presented in a dry form (eg, infant milk formulae) have grown quickly over the last decade, now accounting for a large share of the profit of the sector. Drying in the Dairy Industry: From Established Technologies to Advanced Innovations deals with the market of dairy powders issues, considering both final product and process as well as their interrelationships. It explains the different processing steps for the production of dairy powders including membrane, homogenisation, concentration and agglomeration processes. The book includes a presentation of the current technologies, the more recent development for each of them and their impact on the quality of the final powders. Lastly, one section is dedicated to recent innovations and methods directed to more sustainable processes, as well as latter developments at lab scale to go deeper in the understanding of the phenomena occurring during spray drying. Key Features: Presents state-of-the-art information on the production of a variety of different dairy powders Discusses the impact of processing parameters and drier design on the product quality such as protein denaturation and viability of probiotics Explains the impact of drying processes on the powder properties such as solubility, dispersibility, wettability, flowability, floodability, and hygroscopicity Covers the technology, modelling and control of the processing steps This book is a synthetic and complete reference work for researchers in academia and industry in order to encourage research and development and innovations in drying in the dairy industry.
Download or read book Drying Technology in Agriculture and Food Sciences written by Arun S. Mujumdar and published by Enfield, NH : Science Publishers. This book was released on 2000 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drying is one of the most cost-effective means of perservation of grains, crops and foods of all varieties. From both energy and environmental viewpoints, as well as the global requirement to feed the growing population, it is important that the drying technique and technology be improved to reduce spoilage and enhance the quality of the product. Much has been accomplished since the 1980s in understanding and development in drying technologies for foods and agro-products. This volume is a compilation of selected invited and refereed articles covering topics of contemporary interest on agricultural and food drying technologies.
Download or read book Solar Drying Systems written by Om Prakash and published by CRC Press. This book was released on 2020-12-28 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solar energy has found its widespread use in direct conversion into electricity either by photovoltaic conversion or through thermal energy, reduction in post-harvest losses, and crop drying. Solar Drying Systems analyzes the fundamentals, principles and applications, heat transfer, elements of drying and solar dryer designs, and related modeling and analysis aspects of solar energy. Discusses both technical and policy-related issues Explores up-to-date status reviews of different solar drying systems Reviews the highlights of present and future solar drying options Includes many figures, solved examples, and tables with problems/exercises at the end of each chapter This book is aimed at senior undergraduate and graduate students in energy engineering.
