Download or read book Survey of Tritium producing Nuclear Reactions written by José González-Vidal and published by . This book was released on 1958 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis of Cancer Risks in Populations Near Nuclear Facilities written by National Research Council and published by National Academies Press. This book was released on 2012-06-29 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the late 1980s, the National Cancer Institute initiated an investigation of cancer risks in populations near 52 commercial nuclear power plants and 10 Department of Energy nuclear facilities (including research and nuclear weapons production facilities and one reprocessing plant) in the United States. The results of the NCI investigation were used a primary resource for communicating with the public about the cancer risks near the nuclear facilities. However, this study is now over 20 years old. The U.S. Nuclear Regulatory Commission requested that the National Academy of Sciences provide an updated assessment of cancer risks in populations near USNRC-licensed nuclear facilities that utilize or process uranium for the production of electricity. Analysis of Cancer Risks in Populations near Nuclear Facilities: Phase 1 focuses on identifying scientifically sound approaches for carrying out an assessment of cancer risks associated with living near a nuclear facility, judgments about the strengths and weaknesses of various statistical power, ability to assess potential confounding factors, possible biases, and required effort. The results from this Phase 1 study will be used to inform the design of cancer risk assessment, which will be carried out in Phase 2. This report is beneficial for the general public, communities near nuclear facilities, stakeholders, healthcare providers, policy makers, state and local officials, community leaders, and the media.
Download or read book Handbook of Radioactivity Analysis written by Michael F. L'Annunziata and published by Elsevier. This book was released on 2012-12-02 with total page 810 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Radioactivity Analysis is written by experts in the measurement of radioactivity. The book describes the broad scope of analytical methods available and instructs the reader on how to select the proper technique. It is intended as a practical manual for research which requires the accurate measurement of radioactivity at all levels, from the low levels encountered in the environment to the high levels measured in radioisotope research. This book contains sample preparation procedures, recommendations on steps to follow, necessary calculations, computer controlled analysis, and high sample throughput techniques. Each chapter includes practical techniques for application to nuclear safety, nuclear safeguards, environmental analysis, weapons disarmament, and assays required for research in biomedicine and agriculture. The fundamentals of radioactivity properties, radionuclide decay, and methods of detection are included to provide the basis for a thorough understanding of the analytical procedures described in the book. Therefore, the Handbook can also be used as a teaching text. - Includes sample preparation techniques for matrices such as soil, air, plant, water, animal tissue, and surface swipes - Provides procedures and guidelines for the analysis of commonly encountered na
Download or read book Tritium written by Marija M. Janković and published by . This book was released on 2018 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tritium, 3H (T), is a radioactive isotope of hydrogen. Naturally occurring tritium is rare on Earth, where trace amounts are formed by the interaction of the atmosphere with cosmic rays. Once formed in the stratosphere, the tritium atoms have a large amount of kinetic energy. At a pressure lower than atmospheric, they react with the oxygen, creating a stable radical HO2. This radical reacts with ozone, following the photochemical reaction of decomposition TO2 to HTO. Once tritium is incorporated into the water molecule, then it falls to the Earth's surface as precipitation or snow, thus entering into the natural hydrological cycle.With a half-life of 12.32 years and a maximum energy of 18 keV beta radiation, this radioisotope is not dangerous externally, but it can be a radiation hazard when inhaled, ingested via food or water, or absorbed through the skin. The biological half-life ranges from around 7 to 14 days, so bioaccumulation of tritium is not a significant concern.Tritium is a very useful hydro-geological tracer and can be successfully applied in assessing the age of groundwater and residence times of continental hydrologic systems or as an oceanic transient tracer. Tritium releases from nuclear installations may be useful for some applications as a powerful local tracer, but on the other hand such releases may affect the reliability and accuracy of tritium use as a global tracer. For this reason, measuring of the activity concentrations of tritium is regularly a part of every national and/or international monitoring programme. Tritium is also used in radio luminescent light sources for watches and various instruments, and, along with deuterium, as a fuel for nuclear fusion reactors with applications in energy generation and weapons.The amount of tritium that appears in the atmosphere as a product of human activity comes from: nuclear reactors, production of nuclear weapons, atmospheric and above ground nuclear explosions, heavy water and tritium plants, and plants for tritium separation. The use of tritium labeled compounds for medical and research purposes is also a possible source of contamination by tritium.Knowledge of the tritium concentration distribution in the environment, awareness of various anthropogenic sources of tritium, and optimization of measurement conditions are of great importance in various applications and in preserving human health.
Download or read book Renewable Energies and CO2 written by Ricardo Guerrero-Lemus and published by Springer Science & Business Media. This book was released on 2012-09-14 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing up-to-date numerical data across a range of topics related to renewable energy technologies, Renewable Energies and CO2 offers a one-stop source of key information to engineers, economists and all other professionals working in the energy and climate change sectors. The most relevant up-to-date numerical data are exposed in 201 tables and graphs, integrated in terms of units and methodology, and covering topics such as energy system capacities and lifetimes, production costs, energy payback ratios, carbon emissions, external costs, patents and literature statistics. The data are first presented and then analyzed to project potential future grid, heat and fuel parity scenarios, as well as future technology tendencies in different energy technological areas. Innovative highlights and descriptions of preproduction energy systems and components from the past four years have been gathered from selected journals and international energy departments from G20 countries. As the field develops, readers are invited and encouraged to contact the authors for feedback and comments. The ongoing data collection and analysis will be used – after proper acknowledgment of contributors - to develop new editions. In this way, it is ensured that Renewable Energies and CO2 will remain an up-to-date resource for all those working with or involved in renewable energy, climate change, energy storage, carbon capture and smart grids.
Download or read book University Physics written by OpenStax and published by . This book was released on 2016-11-04 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: University Physics is a three-volume collection that meets the scope and sequence requirements for two- and three-semester calculus-based physics courses. Volume 1 covers mechanics, sound, oscillations, and waves. Volume 2 covers thermodynamics, electricity and magnetism, and Volume 3 covers optics and modern physics. This textbook emphasizes connections between between theory and application, making physics concepts interesting and accessible to students while maintaining the mathematical rigor inherent in the subject. Frequent, strong examples focus on how to approach a problem, how to work with the equations, and how to check and generalize the result. The text and images in this textbook are grayscale.
Download or read book Assessment of Inertial Confinement Fusion Targets written by National Research Council and published by National Academies Press. This book was released on 2013-07-17 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the fall of 2010, the Office of the U.S. Department of Energy's (DOE's) Secretary for Science asked for a National Research Council (NRC) committee to investigate the prospects for generating power using inertial confinement fusion (ICF) concepts, acknowledging that a key test of viability for this concept-ignition -could be demonstrated at the National Ignition Facility (NIF) at Lawrence Livermore National Laboratory (LLNL) in the relatively near term. The committee was asked to provide an unclassified report. However, DOE indicated that to fully assess this topic, the committee's deliberations would have to be informed by the results of some classified experiments and information, particularly in the area of ICF targets and nonproliferation. Thus, the Panel on the Assessment of Inertial Confinement Fusion Targets ("the panel") was assembled, composed of experts able to access the needed information. The panel was charged with advising the Committee on the Prospects for Inertial Confinement Fusion Energy Systems on these issues, both by internal discussion and by this unclassified report. A Panel on Fusion Target Physics ("the panel") will serve as a technical resource to the Committee on Inertial Confinement Energy Systems ("the Committee") and will prepare a report that describes the R&D challenges to providing suitable targets, on the basis of parameters established and provided to the Panel by the Committee. The Panel on Fusion Target Physics will prepare a report that will assess the current performance of fusion targets associated with various ICF concepts in order to understand: 1. The spectrum output; 2. The illumination geometry; 3. The high-gain geometry; and 4. The robustness of the target design. The panel addressed the potential impacts of the use and development of current concepts for Inertial Fusion Energy on the proliferation of nuclear weapons information and technology, as appropriate. The Panel examined technology options, but does not provide recommendations specific to any currently operating or proposed ICF facility.
Download or read book An Assessment of the Prospects for Inertial Fusion Energy written by National Research Council and published by National Academies Press. This book was released on 2013-07-05 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: The potential for using fusion energy to produce commercial electric power was first explored in the 1950s. Harnessing fusion energy offers the prospect of a nearly carbon-free energy source with a virtually unlimited supply of fuel. Unlike nuclear fission plants, appropriately designed fusion power plants would not produce the large amounts of high-level nuclear waste that requires long-term disposal. Due to these prospects, many nations have initiated research and development (R&D) programs aimed at developing fusion as an energy source. Two R&D approaches are being explored: magnetic fusion energy (MFE) and inertial fusion energy (IFE). An Assessment of the Prospects for Inertial Fusion Energy describes and assesses the current status of IFE research in the United States; compares the various technical approaches to IFE; and identifies the scientific and engineering challenges associated with developing inertial confinement fusion (ICF) in particular as an energy source. It also provides guidance on an R&D roadmap at the conceptual level for a national program focusing on the design and construction of an inertial fusion energy demonstration plant.
Download or read book Fundamentals of Magnetic Thermonuclear Reactor Design written by Vasilij A. Glukhikh and published by Woodhead Publishing. This book was released on 2018-05-21 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Magnetic Thermonuclear Reactor Design is a comprehensive resource on fusion technology and energy systems written by renowned scientists and engineers from the Russian nuclear industry. It brings together a wealth of invaluable experience and knowledge on controlled thermonuclear fusion (CTF) facilities with magnetic plasma confinement – from the first semi-commercial tokamak T-3, to the multi-billion international experimental thermonuclear reactor ITER, now in construction in France. As the INTOR and ITER projects have made an immense contribution in the past few decades, this book focuses on its practical engineering aspects and the basics of technical physics and electrical engineering. Users will gain an understanding of the key ratios between plasma and technical parameters, design streamlining algorithms and engineering solutions. - Written by a team of qualified experts who have been involved in the design of thermonuclear reactors for over 50 years - Outlines the most important features of the ITER project in France which is building the largest tokamak, including the design, material selection, safety and economic considerations - Includes data on how to design magnetic fusion reactors using CAD tools, along with relevant regulatory documents
Download or read book Neutron Generators for Analytical Purposes written by International Atomic Energy Agency and published by IAEA Radiation Technology Repo. This book was released on 2012 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication addresses recent developments in neutron generator (NG) technology. It presents information on compact instruments with high neutron yield to be used for neutron activation analysis (NAA) and prompt gamma neutron activation analysis in combination with high count rate spectrometers. Traditional NGs have been shown to be effective for applications including borehole logging, homeland security, nuclear medicine and the on-line analysis of aluminium, coal and cement. Pulsed fast thermal neutron analysis, as well as tagged and timed neutron analysis, are additional techniques which can be applied using NG. Furthermore, NG can effectively be used for elemental analysis and is also effective for analysis of hidden materials by neutron radiography. Useful guidelines for developing NG based research laboratories are also provided in this publication.
Download or read book Safe Handling of Tritium written by International Atomic Energy Agency and published by . This book was released on 1991 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication contains information on the dosimetry and monitoring of tritium, the use of protective clothing for work with tritium, safe practices in tritium handling laboratories and details of tritium compatible materials. The information has been compiled from experience in the various applications of tritium and should represent valuable source material to all users of tritium, including those involved in fusion R&D.
Download or read book Comprehensive Nuclear Materials written by Todd R Allen and published by Elsevier. This book was released on 2011-05-12 with total page 3552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Nuclear Materials, Five Volume Set discusses the major classes of materials suitable for usage in nuclear fission, fusion reactors and high power accelerators, and for diverse functions in fuels, cladding, moderator and control materials, structural, functional, and waste materials. The work addresses the full panorama of contemporary international research in nuclear materials, from Actinides to Zirconium alloys, from the worlds' leading scientists and engineers. Critically reviews the major classes and functions of materials, supporting the selection, assessment, validation and engineering of materials in extreme nuclear environment Fully integrated with F-elements.net, a proprietary database containing useful cross-referenced property data on the lanthanides and actinides Details contemporary developments in numerical simulation, modelling, experimentation, and computational analysis, for effective implementation in labs and plants
Download or read book Nuclear Fusion written by Igor Girka and published by BoD – Books on Demand. This book was released on 2019-04-17 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power production and its consumption and distribution are among the most urgent problems of mankind. Despite positive dynamics in introducing renewable sources of energy, nuclear power plants still remain the major source of carbon-free electric energy. Fusion can be an alternative to fission in the foreseeable future. Research in the field of controlled nuclear fusion has been ongoing for almost 100 years. Magnetic confinement systems are the most promising for effective implementation, and the International Thermonuclear Experimental Reactor is under construction in France. To accomplish nuclear fusion on Earth, we have to resolve a number of scientific and technological problems. This monograph includes selected chapters on nuclear physics and mechanical engineering within the scope of nuclear fusion.
Download or read book Tritium Fuel of Fusion Reactors written by Tetsuo Tanabe and published by Springer. This book was released on 2016-12-05 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on tritium as a fuel for fusion reactors and a next-generation energy source. Following an introduction of tritium as a hydrogen radioisotope, important issues involved in establishing safe and economical tritium fuel cycles including breeding for a fusion reactor are summarized; these include the handling of large amounts of tritium: confinement, leakage, contamination, permeation, regulation and tritium accountancy, and impacts on surrounding areas. Targeting and encouraging the students and technicians who will design and operate fusion reactors in the near future, this book offers a valuable resource on tritium science and technology.
Download or read book Hearings and Reports on Atomic Energy written by United States. Congress. Joint Committee on Atomic Energy and published by . This book was released on 1969 with total page 1128 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Environmental Effects of Producing Electric Power written by United States. Congress. Joint Committee on Atomic Energy and published by . This book was released on 1969 with total page 2816 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Science of the Cold Fusion Phenomenon written by Hideo Kozima and published by Elsevier. This book was released on 2006-09-26 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Broken up in to three sections, The Science of the Cold Fusion Phenomenon gives a unified explanation of all the significant data on the Cold Fusion Phenomena to date. It presents a history of the Cold Fusion Phenomenon (CFP), gives the fundamental experimental results of the CFP and presents a quantum mechanical treatment of physical problems associated with cold fusion. - Overviews the abundance of research and investigation that followed the 'cold fusion scandal' in 1989 - Explores the fundamental science behind the original Fleischmann experiment
