Download or read book Fundamentals of Surgical Simulation written by Anthony G. Gallagher and published by Springer Science & Business Media. This book was released on 2011-08-24 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Surgical Simulation explains in detail, from a behavioural science/human factors perspective, why modern image guided medicine such as surgery, interventional cardiology and interventional radiology are difficult to learn and practice. Medicine is currently at a tipping point in terms of how physicians in procedural based medicine are trained. Fundamentals of Surgical Simulation helps drive this change and is a valuable resource for medical trainers and trainees alike. For trainers, this book gives explicit theoretical and applied information on how this new training paradigm works thus allowing them to tailor the application of simulation training to their program, no matter where in the world they work. For the trainee, it allows them to see and understand the rules of this new training paradigm thus allowing them to optimize their approach to training and reaching proficiency in as efficient a manner as possible. For the simulation researcher, engineer and medical profession Fundamentals of Surgical Simulation poses some difficult questions that require urgent unambiguous and agreed answers.
Download or read book Comprehensive Healthcare Simulation Surgery and Surgical Subspecialties written by Dimitrios Stefanidis and published by Springer. This book was released on 2019-01-05 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This pragmatic book is a guide for the use of simulation in surgery and surgical subspecialties, including general surgery, urology, gynecology, cardiothoracic and vascular surgery, orthopedics, ophthalmology, and otolaryngology. It offers evidence-based recommendations for the application of simulation in surgery and addresses procedural skills training, clinical decision-making and team training, and discusses the future of surgical simulation. Readers are introduced to the different simulation modalities and technologies used in surgery with a variety of learners including students, residents, practicing surgeons, and other health-related professionals.
Download or read book Surgical Simulation written by Prokar Dasgupta and published by Anthem Press. This book was released on 2014-01-15 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now widely recognized as one of the most effective methods for training future surgeons, simulation has become an integral part of the multidimensional landscape that makes up a surgical education curriculum. This book provides an overview of the current status of simulation-based training in various surgical disciplines and explains the science of surgical education, from developing a simulation programme to properly assess surgeons-in-training, to transferring the skills acquired through simulation into real-life settings. As such, the book can be used as a guide for understanding the basics of surgical education.
Download or read book Advances in Patient Safety written by Kerm Henriksen and published by . This book was released on 2005 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: v. 1. Research findings -- v. 2. Concepts and methodology -- v. 3. Implementation issues -- v. 4. Programs, tools and products.
Download or read book Simulation in Surgical Training and Practice An Issue of Surgical Clinics written by Kimberly M. Brown and published by Elsevier Health Sciences. This book was released on 2015-11-12 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulation in Surgical Training and Practice is reviewed extensively in this important Surgical Clinics of North America issue. Articles include: Applying Educational Theory to Simulation Based Training and Assessment in Surgery; Figuring out Team Simulation Training; Faculty Development for Simulation Training; The Evolving Role of Simulation in Teaching Surgery in Undergraduate Medical Education; Using Simulation in Inter-Professional Education; Current Status of Simulation Based Training in Graduate Medical Education; National Simulation-based Training of Fellows: The Vascular Surgery Example; Paying For it: Funding Models for Simulation Centers; Surgical Simulation Centers as Educational Homes for Practicing Surgeons; Better Assessment: Advanced Engineering Technology for Measuring Performance In and Out of the Simulation Lab; Moving the Needle – Simulation’s Impact on Patient Outcomes; Human Factors Engineering and Effective Simulation – Partners for Improved Patient Safety; Simulation for the Assessment and Improvement of Teamwork and Communication in the Operating Room; Using Simulation to Improve Systems; Simulation for Maintenance of Certification; and more!
Download or read book Simulation and Surgical Competency An Issue of Surgical Clinics written by Neal Seymour and published by Elsevier Health Sciences. This book was released on 2010-06-21 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue of the Surgical Clinics of North America will include articles devoted to the following topics: the growth of simulators in surgery; the science of proficiency and competency, running a skills lab; high intensity preparatory simulation training; assessment and feedback in the skills lab and OR, FLS & FES: comprehensive models of training and assessment; verification of proficiency: a prerequisite for clinical experience; team training: non-traditional surgical competencies; human factors and simulation training; virtual reality devices and environments; simulation in certification; and the future of surgical simulation.
Download or read book Surgery Simulation and Soft Tissue Modeling written by Nicholas Ayache and published by Springer Science & Business Media. This book was released on 2003-06-04 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the International Symposium on Surgery Simulation and Soft Tissue Modeling, IS4TM 2003, held in Juan-Les-Pins, France in June 2003. The 33 revised full papers presented together with 3 invited papers were carefully reviewed and selected from 45 submissions. The papers are organized in topical sections on soft tissue models, haptic rendering, cardiac modeling, and patient specific simulators.
Download or read book Cataract Blindness and Simulation Based Training for Cataract Surgeons written by James R. Broyles and published by Rand Corporation. This book was released on 2013-02-21 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cataracts cause about half of all cases of blindness worldwide, largely in developing countries. HelpMeSee Inc. is developing a simulator-based method for rapid cataract surgical training that RAND researchers determined could significantly help to close the backlog of cataract cases, expected to be 32 million globally by 2020. For this to occur, challenges in the areas of outreach, quality monitoring, and public acceptance must be met.
Download or read book Comprehensive Healthcare Simulation Neurosurgery written by Ali Alaraj and published by Springer. This book was released on 2018-05-18 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a practical guide for the use of simulation in neurosurgery, with chapters covering high fidelity simulation, animal models simulation, cadaveric simulation, and virtual reality simulation. Readers are introduced to the different simulation modalities and technologies and are guided on the use of simulation for a variety of learners, including medical students, residents, practicing pediatricians, and health-related professionals. Comprehensive Healthcare Simulation: Neurosurgery is written and edited by leaders in the field and includes dozens of high-quality color surgical illustrations and photographs as well as videos. This book is part of the Comprehensive Healthcare Simulation Series which provides focused volumes on the use of simulation in a single specialty or on a specific simulation topic, and emphasizing practical considerations and guidance.
Download or read book Simulation in Robotic Surgery A Comparative Review of Simulators of the Da Vinci Surgical Robot written by Roger D Smith and published by . This book was released on 2013-05 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt: For every complex and expensive system, there emerges a need for training devices and scenarios that will assist new learners in mastering the use of the device and understanding how to apply it with value. This has proven to be true in aviation, nuclear power control, and medicine among other fields. Laparoscopic surgery simulators have played a valuable role in improving the practice of surgery over the last 20 years and the same trends and values will likely apply in robotic surgery. The complexity, criticality, and cost associated with the effective application of the da Vinci surgical robot have stimulated the commercial creation of simulators which replicate the operations of this robot. Each of these simulators provides a slightly different perspective and solution to the problem. This book explores the characteristics and differences between all of the currently available devices. The details provided here are structured to equip readers with sufficient knowledge about the simulators to make their own decisions about which best meets their needs. Each of them possesses unique traits which make them valuable solutions for different types of users. It is not our intent to make a universal recommendation of one device over the others. Readers should draw their own conclusions based on their unique needs for a device. The three current simulation devices for the da Vinci robot are the: da Vinci Skills Simulator (Intuitive Surgical Inc.), dV-Trainer (Mimic Technologies Inc.) and Robotic Surgery Simulator (Simulated Surgical Systems LLC). The three simulators which are described in this book offer a different value proposition to potential purchasers and to novice learners. The da Vinci Skills Simulator, dV-Trainer, an RoSS are complex systems which are significantly less costly than the actual da Vinci robotic surgical system and can be operated at a fraction of the cost of the instruments required for this robot. The intent of this book is to present the characteristics of each system to enable intelligent and informed purchasing and usage decisions.
Download or read book Handbook of Research on the Efficacy of Training Programs and Systems in Medical Education written by Gotian, Ruth and published by IGI Global. This book was released on 2019-12-27 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: The content of medical education knowledge transfer is compounded as medical breakthroughs constantly impact treatment, and new diseases are discovered at an increasingly rapid pace. While much of the knowledge transfer remains unchanged throughout the generations, there are unique hallmarks to this generation’s education, ranging from the impact of technology on learning formats to the use of standardized patients and virtual reality in the classroom. The Handbook of Research on the Efficacy of Training Programs and Systems in Medical Education is an essential reference source that focuses on key considerations in medical curriculum and content delivery and features new methods of knowledge and skill transfer. Featuring research on topics such as the generational workforce, medical accreditation, and professional development, this book is ideally designed for teachers, physicians, learning practitioners, IT consultants, higher education faculty, instructional designers, school administrators, researchers, academicians, and medical students seeking coverage on major and high-profile issues in medical education.
Download or read book Mastery of Endoscopic and Laparoscopic Surgery written by Nathaniel J. Soper and published by Lippincott Williams & Wilkins. This book was released on 2008-10-01 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text/atlas is a comprehensive guide to minimally invasive procedures in general surgery. Chapters are authored by world-renowned experts in this technology, who share their firsthand operative experience, emphasizing decision-making, anatomy, and key steps in the operations. The Third Edition features expanded sections on the esophagus, gastrointestinal tract, liver and biliary tract, pancreas and spleen, and small and large bowel, new sections on state-of-the-art surgical tools and bariatric surgery, and new chapters on esophageal lengthening, duodenal switch, and natural orifice transluminal endoscopic surgery (NOTES). Full-color photographs and drawings complement the text throughout. Each chapter concludes with comments from the editors. A companion Website will offer the fully searchable text and an image bank.
Download or read book Systems Modeling and Simulation written by Koji Koyamada and published by Springer Science & Business Media. This book was released on 2007-07-05 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Asia Simulation Conference 2006 (JSST 2006) was aimed at exploring challenges in methodologies for modeling, control and computation in simu lation, and their applications in social, economic, and financial fields as well as established scientific and engineering solutions. The conference was held in Tokyo from October 30 to November 1, 2006, and included keynote speeches presented by technology and industry leaders, technical sessions, organized sessions, poster sessions, and vendor exhibits. It was the seventh annual inter national conference on system simulation and scientific computing, which is organized by the Japan Society for Simulation Technology (JSST), the Chi nese Association for System Simulation (CASS), and the Korea Society for Simulation (KSS). For the conference, all submitted papers were refereed by the international technical program committee, each paper receiving at least two independent reviews. After careful reviews by the committee, 65 papers from 143 submis sions were selected for oral presentation. This volume includes the keynote speakers' papers along with the papers presented at the oral sessions and the organized sessions. As a result, we are publishing 87 papers for the conference in this volume. In addition to the scientific tracts presented, the conference featured keynote presentations by five invited speakers. We are grateful to them for accepting our invitation and for their presentations. We also would like to express our gratitude to all contributors, reviewers, technical program conmiittee members, and organizing committee members who made the conference very successful.
Download or read book Surgical Simulation and Training written by Jamie L. Huang and published by Nova Science Publishers. This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The training of a surgeon includes the acquisition of a number of characteristics, including a cognitive knowledge base, problem formulation and decision-making abilities, appropriate psychosocial relationships, and other attributes that can be measured with objective testing, such as national board or speciality certifying examinations. A battery of sophisticated devices is being created to teach and provide objective evaluations of the trainee's technical abilities. These innovative state-of-the-art simulation devices, used to teach basic skills and surgical tasks through repetitive proctored challenges, will enable detection and analysis of surgical errors and near miss incidents without risk to patients. This book presents the latest research on surgical simulation and training topics.
Download or read book Healthcare Simulation and Online Learning written by Zaleha Abdullah Mahdy and published by Frontiers Media SA. This book was released on 2022-07-05 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bioengineering for Surgery written by Walid Farhat and published by Chandos Publishing. This book was released on 2015-09-27 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioengineering is the application of engineering principles to address challenges in the fields of biology and medicine encompassing the principles of engineering design to the full spectrum of living systems. In surgery, recent advances in minimal invasive surgery and robotics are the culmination of the work that both engineers and surgeons have achieved in the medical field through an exciting and challenging interface. This interface rests on the medical curiosity and engineering solutions that lead eventually to collaboration and development of new ideas and technologies. Most recently, innovation by surgeons has become a fundamental contribution to medical research in the surgical field, and it is through effective communication between surgeons and biomedical engineers and promoting collaborative initiatives that translational research is possible. Bioengineering for Surgery explores this interface between surgeons and engineers and how it leads to innovation processes, providing clinical results, fundraising and prestige for the academic institution. This book is designed to teach students how engineers can fit in with their intended environment and what type of materials and design considerations must be taken into account in regards to medical ideas. - Introduces engineers to basic medical knowledge - Provides surgeons and medical professionals with basic engineering principles that are necessary to meet the surgeons' needs
Download or read book Human Factors in Simulation and Training written by Dennis A. Vincenzi and published by CRC Press. This book was released on 2023-08-30 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers current application and use of the latest technological advances in the simulation and training. Integrates real world experiences with cutting edge technology and research for the readers. Discusses design and development of algorithms for gesture-based control of semi-autonomous vehicles. Explores how virtual and augmented reality training methods are impacting aviation maintenance.
