Download or read book Plastic Surface Modification written by Rory A. Wolf and published by Hanser Publications. This book was released on 2015-12-07 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer surface modification is a topic that has been the object of a large number of investigations by academia and industry, but relatively little attention has been paid to surface activation technologies which, when appropriately utilized, make specific polymer-based surfaces receptive to value-adding interfaces such as inks, coating and adhesive formulations. Adhesion strength is generally determined by the properties of a base material and its interface. Optimizing adhesion strength can be accomplished by modifying these interfaces chemically and physically. As polymers are continually engineered to meet new product application requirements, optimizing the activation of these surfaces requires a fresh look at cost effective ways to etch, clean and functionalize them. These demands require detailed information on the surface treatment of classic materials, as well as an examination of the latest surface treatment machine designs available anywhere in the world today which are used to process these materials. There are four full chapters devoted specifically to corona, ozone, flame, and plasma discharge surface treatment technologies; and an interesting and useful identification of common adhesion maladays.
Download or read book Surface Treatment of Materials for Adhesive Bonding written by Sina Ebnesajjad and published by William Andrew. This book was released on 2013-10-22 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aimed at engineers and materials scientists in a wide range of sectors, this book is a unique source of surface preparation principles and techniques for plastics, thermosets, elastomers, ceramics and metals bonding. With emphasis on the practical, it draws together the technical principles of surface science and surface treatments technologies to enable practitioners to improve existing surface preparation processes to improve adhesion and, as a result, enhance product life. This book describes and illustrates the surface preparations and operations that must be applied to a surface before acceptable adhesive bonding is achieved. It is meant to be an exhaustive overview, including more detailed explanation where necessary, in a continuous and logical progression. The book provides a necessary grounding in the science and practice of adhesion, without which adequate surface preparation is impossible. Surface characterization techniques are included, as is an up-to-date assessment of existing surface treatment technologies such as Atmospheric Plasma, Degreasing, Grit blasting, laser ablation and more. Fundamental material considerations are prioritised over specific applications, making this book relevant to all industries using adhesives, such as medical, automotive, aerospace, packaging and electronics. This second edition represents a full and detailed update, with all major developments in the field included and three chapters added to cover ceramic surface treatment, plasma treatment of non-metallic materials, and the effect of additives on surface properties of plastics. - A vital resource for improving existing surface treatment processes to increase product life by creating stronger, more durable adhesive bonds - Relevant across a variety of industries, including medical, automotive and packaging - Provides essential grounding in the science of surface adhesion, and details how this links with the practice of surface treatment
Download or read book Surface Treatment of Materials for Adhesion Bonding written by Sina Ebnesajjad and published by William Andrew. This book was released on 2006-06-12 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a unique compilation of surface preparation principles and techniques for plastics, thermosets, elastomers, and metals bonding. With emphasis on the practical, it draws together in a single source technical principles of surface science and surface treatments technologies of plastics, elastomers, and metals. It is both a reference and a guide for engineers, scientists, practitioners of surface treatment, researchers, students, and others involved in materials adhesion and processing.This book describes and illustrates the surface preparations and operations that must be applied to a surface before acceptable adhesive bonding is achieved. It is meant to be a comprehensive overview, including more detailed explanation where necessary, in a continuous and logical progression. This book is intended to be a handbook for reference of surface treating processes. The more technical chapters can be bypassed to study the applied chapters. The text is accessible to readers with a college-level background in mathematics and chemistry, but an in-depth knowledge of adhesion technology is not required.
Download or read book Surface Preparation Techniques for Adhesive Bonding written by Raymond F. Wegman and published by William Andrew. This book was released on 2012-12-31 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Preparation Techniques for Adhesive Bonding is an essential guide for materials scientists, mechanical engineers, plastics engineers, scientists and researchers in manufacturing environments making use of adhesives technology. Wegman and van Twisk provide practical coverage of a topic that receives only cursory treatment in more general books on adhesives, making this book essential reading for adhesion specialists, plastics engineers, and a wide range of engineers and scientists working in sectors where adhesion is an important technology, e.g. automotive / aerospace, medical devices, electronics. Wegman and van Twisk provide a wealth of practical information on the processing of substrate surfaces prior to adhesive bonding. The processing of aluminum and its alloys, titanium and its alloys, steels, copper and its alloys, and magnesium are treated in the form of detailed specifications with comparative data. Other metals not requiring extensive treatment are also covered in detail, as are metal matrix and organic matrix composites, thermosets and thermoplastics. This new edition has been updated with coverage of the latest developments in the field including the sol-gel process for aluminum, titanium, and stainless steel, atmospheric plasma treatment for metals, plastics and rubbers and treatments for bronze and nickel alloys. - Updated to include recent technological developments and chemicals currently prescribed for cleaning and surface preparation; a new generation of adhesives technologists can benefit from this classic guide - Enables Materials and Process personnel to select the best process available for their particular application - Practical coverage of a topic that receives only cursory coverage in more general books on adhesives: essential reading for adhesion specialists, plastics engineers, and a wide range of engineers and scientists working in sectors where adhesion is an important technology, e.g. automotive / aerospace, medical devices, electronics
Download or read book Handbook of Manufacturing Engineering and Technology written by Andrew Y. C. Nee and published by Springer. This book was released on 2014-10-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Springer Reference Work Handbook of Manufacturing Engineering and Technology provides overviews and in-depth and authoritative analyses on the basic and cutting-edge manufacturing technologies and sciences across a broad spectrum of areas. These topics are commonly encountered in industries as well as in academia. Manufacturing engineering curricula across universities are now essential topics covered in major universities worldwide.
Download or read book Plastic Surface Modification written by Rory A. Wolf and published by . This book was released on 2010 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plasma Surface Modification and Plasma Polymerization written by Norihiro Inagaki and published by CRC Press. This book was released on 2014-07-22 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: In current materials R&D, high priority is given to surface modification techniques to achieve improved surface properties for specific applications requirements. Plasma treatment and polymerization are important technologies for this purpose. This book provides a basic and thorough presentation of this subject. This is probably the first book
Download or read book The Surface Treatment and Finishing of Aluminium and Its Alloys written by P. G. Sheasby and published by . This book was released on 2001 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Atmospheric Pressure Plasma Treatment of Polymers written by Michael Thomas and published by John Wiley & Sons. This book was released on 2013-06-19 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: An indispensable volume detailing the current and potential applications of atmospheric pressure plasma treatment by experts practicing in fields around the world Polymers are used in a wide variety of industries to fabricate legions of products because of their many desirable traits. However, polymers in general (and polyolefins, in particular) are innately not very adhesionable because of the absence of polar or reactive groups on their surfaces and concomitant low surface energy. Surface treatment of polymers, however, is essential to impart reactive chemical groups on their surfaces to enhance their adhesion characteristic. Proper surface treatment can endow polymers with improved adhesion without affecting the bulk properties. A plethora of techniques (ranging from wet to dry, simple to sophisticated, vacuum to non-vacuum) for polymer surface modification have been documented in the literature but the Atmospheric Pressure Plasma (APP) treatment has attracted much attention because it offers many advantages vis-a-vis other techniques, namely uniform treatment, continuous operation, no need for vacuum, simplicity, low cost, no environmental or disposal concern, and applicability to large area samples. Although the emphasis in this book is on the utility of APP treatment for enhancement of polymer adhesion, APP is also applicable and effective to modulate many other surface properties of polymers: superhydrophilicity, superhydrophobicity, anti-fouling, anti-fogging, anti-icing, cell adhesion, biocompatibility, tribological behavior, etc. The key features of Atmospheric Pressure Plasma Treatment of Polymers: Address design and functions of various types of reactors Bring out current and potential applications of APP treatment Represent the cumulative wisdom of many key academic and industry researchers actively engaged in this key and enabling technology
Download or read book Surface Treatment of Plastics written by David A. Markgraf and published by . This book was released on 1990 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Adhesives and Surface Preparation written by Sina Ebnesajjad and published by William Andrew. This book was released on 2010-12-15 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Adhesives and Surface Preparation provides a thoroughly practical survey of all aspects of adhesives technology from selection and surface preparation to industrial applications and health and environmental factors. The resulting handbook is a hard-working reference for a wide range of engineers and technicians working in the adhesives industry and a variety of industry sectors that make considerable use of adhesives. Particular attention is given to adhesives applications in the automotive, aerospace, medical, dental and electronics sectors. - A handbook that truly focuses on the applied aspects of adhesives selection and applications: this is a book that won't gather dust on the shelf - Provides practical techniques for rendering materials surfaces adherable - Sector-based studies explore the specific issues for automotive and aerospace, medical, dental and electronics
Download or read book Atmospheric Pressure Plasma for Surface Modification written by Rory A. Wolf and published by John Wiley & Sons. This book was released on 2012-11-08 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Book's focus and intent is to impart an understanding of the practical application of atmospheric plasma for the advancement of a wide range of current and emerging technologies. The primary key feature of this book is the introduction of over thirteen years of practical experimental evidence of successful surface modifications by atmospheric plasma methods. It offers a handbook-based approach for leveraging and optimizing atmospheric plasma technologies which are currently in commercial use. It also offers a complete treatment of both basic plasma physics and industrial plasma processing with the intention of becoming a primary reference for students and professionals. The reader will learn the mechanisms which control and operate atmospheric plasma technologies and how these technologies can be leveraged to develop in-line continuous processing of a wide variety of substrates. Readers will gain an understanding of specific surface modification effects by atmospheric plasmas, and how to best characterize those modifications to optimize surface cleaning and functionalization for adhesion promotion. The book also features a series of chapters written to address practical surface modification effects of atmospheric plasmas within specific application markets, and a commercially-focused assessment of those effects.
Download or read book Innovation Trends in Plastics Decoration and Surface Treatment written by Edward B Crutchley and published by Smithers Rapra. This book was released on 2014-08-11 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: The plastics industry is a major player for consumer items, notably for the automotive, consumer electronics and packaging industries, and is necessarily very active in innovation. As a result, moulded thermoplastics are achieving new heights in decorative appearance and quality. Many striking aesthetic effects are possible by employing new polymer blends coupled with a diverse range of decoration and surface treatment technologies. These can produce three-dimensional and tactile finishes, high definition images, flawless high gloss and metallic surfaces, as well as effects ranging from imitation materials, interferential colours, colour gradients, colour change and travel, gloss and matte combinations, and even acoustic or olfactory effects. Manufacturing processes to achieve these include several types of in-mould film, coating or decorating technique, relatively recent technologies to improve surface quality, as well as traditional separate decorating or coating processes such as dry offset; flexographic; inkjet; pad and screen printing; foil transfer; labelling; laser marking; plating; spray coating; and vacuum deposition. This unique book analyses and compares recent trends in each of over 20 types of mainstream manufacturing process and 10 classes of sensory effect they can produce. Supported by over 100 tables, a 3-year sampling of over 1,000 mentioned patent documents and hundreds of commercial developments helps to identify the main trends and their innovators, key innovative clusters and the most sought-after effects, as well as provide indications for the future.
Download or read book Surface Treatment of Plastics written by David A. Markgraf and published by CRC PressI Llc. This book was released on 1997-01-01 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Energy written by Mahmood Aliofkhazraei and published by BoD – Books on Demand. This book was released on 2015-12-16 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: The words hydro, phobic and philic are derived from Greek and they mean water, fear and adoration respectively. These words are being used to define the interaction of water and other materials. As an example, these words are being used in classification of liquids and solids based on their solubility in water, as well as classification of solid surfaces regarding to their wettability. A lot of surfaces in the nature have Superhydrophobic and self-cleaning properties. For example the wings of a butterfly, leaves of some plants, including cabbage and Indian Cress, have the mentioned properties. The best example is the LOTUS leaf. This book collects new developments in the science of surface energy.
Download or read book Smart Coatings written by Theodore Provder and published by . This book was released on 2007 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past 25 years coatings technologies have been influenced by the need to lower volatile organic contents (VOC) in order to comply with stricter environmental regulations as well as to reduce the use of costly petroleum based solvents. During this time the use of waterborne coatings in the architectural, industrial maintenance and original equipment manufacturing (OEM) sectors has continued to grow replacing solvent based coatings while meeting the ever decreasing VOC targets. In addition to waterborne coatings, other alternative technologies in the industrial and OEM sectors include powder coatings, uv-curable coatings and high solids coatings have had significant growth. Traditionally these coatings had the primary functions of protecting and decorating substrates. More recently, there has been growth in Research and Development and commercial product generation of coatings which have novel functions and sense and interact with their environment in addition to having the traditional protection and decoration functions. These coatings are often referred to as Smart Coatings. These types of coatings generally provide significant added value. Smart Coatings can be achieved in many ways such as by addition of additives and strategically designing polymer structures and coatings morphologies.
Download or read book Biodegradable Green Composites written by Susheel Kalia and published by John Wiley & Sons. This book was released on 2016-02-29 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively addresses surface modification of natural fibers to make them more effective, cost-efficient, and environmentally friendly. Topics include the elucidation of important aspects surrounding chemical and green approaches for the surface modification of natural fibers, the use of recycled waste, properties of biodegradable polyesters, methods such as electrospinning, and applications of hybrid composite materials.
