Download or read book Surface Roughness Effects on Nucleate Boiling Heat Transfer Rates written by James C Gibson and published by Hassell Street Press. This book was released on 2021-09-09 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important and is part of the knowledge base of civilization as we know it. This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. To ensure a quality reading experience, this work has been proofread and republished using a format that seamlessly blends the original graphical elements with text in an easy-to-read typeface. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Download or read book Hydrodynamic Aspects of Boiling Heat Transfer written by N. Zuber and published by . This book was released on 1959 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Review and Assessment of Boiling Heat Transfer and the Departure from Nucleate Boiling written by Gerhard O. Mueller and published by . This book was released on 1958 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An SEM Surface Study of Nucleate Pool Boiling Heat Transfer to Saturated Liquid Nitrogen Reduced Pressures from 0 1 to 0 9 written by David Virgil Porchey and published by . This book was released on 1970 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This study constituted an examination of both nucleate boiling and maximum heat flux characteristics of liquid nitrogen boiling from characterized surfaces. Several textures of gold plated copper surfaces were studied in addition to silver and silver oxide surfaces. Data were taken over a wide range of reduced pressures. All surfaces were examined using a Scanning Electron Microscope (SEM). Data and micrograph comparison revealed that both surface chemistry and surface roughness affect the nucleate boiling characteristics of liquid nitrogen. These effects are separated from each other showing that nucleate boiling is a function of both surface chemistry and topography. Surface roughness was found to have a significant effect on the maximum heat flux with rougher surfaces yielding higher heat flux values. The temperature difference at burnout was found to be a function of both surface chemistry and roughness. Some existing correlations for both nucleate boiling and maximum heat fluxes were examined and shown to inadequately predict the data, primarily because of inability to account for surface roughness and/or surface-fluid interaction as affected by surface chemistry. A maximum temperature difference correlation tested predicted burnout temperature differences well. The necessity to age a surface in the fluid to be boiled was found not to be a result of adsorbed gases, but probably a result of impurities acquired on the surface that must be removed. Attempts to observe hysteresis is were unsuccessful. Hysteresis was found not to be a function of adsorbed inert gases. Data indicated that one mechanism of heat transfer by nucleate boiling will not suffice for all pressures. An existing nucleate boiling correlation was modified to allow for a mechanism change and predicted the data better than other correlations tested"--Abstract, pages ii-iii.
Download or read book Survey of the Literature Pertaining to the Phenomena of Nucleate Boiling written by R. A. Rockow and published by . This book was released on 1959 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Separate Effects of Surface Roughness Wettability and Porosity on Boiling Heat Transfer and Critical Heat Flux and Optimization of Boiling Surfaces written by Harrison Fagan O'Hanley and published by . This book was released on 2012 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: The separate effects of surface wettability, porosity, and roughness on critical heat flux (CHF) and heat transfer coefficient (HTC) were examined using carefully-engineered surfaces. All test surfaces were prepared on nanosmooth indium tin oxide - sapphire heaters and tested in a pool boiling facility in MIT's Reactor Thermal Hydraulics Laboratory. Roughness was controlled through fabrication of micro-posts of diameter 20[mu]m and height 15[mu]m; intrinsic wettability was controlled through deposition of thin compact coatings made of hydrophilic SiO2 (typically, 20nm thick) and hydrophobic fluorosilane (monolayer thickness); porosity and pore size were controlled through deposition of layer-by-layer coatings made of SiO2 nanoparticles. The ranges explored were: 0 - 15[mu] for roughness (Rz), 0 - 135 degrees for intrinsic wettability, and 0 - 50% and 50nm for porosity and pore size, respectively. During testing, the active heaters were imaged with an infrared camera to map the surface temperature profile and locate distinct nucleation sites. It was determined that wettability can play a large role on a porous surface, but has a limited effect on a smooth non-porous surface. Porosity had very pronounced effects on CHF. When coupled with hydrophilicity, a porous structure enhanced CHF by approximately 50% - 60%. However, when combined with a hydrophobic surface, porosity resulted in a reduction of CHF by 97% with respect to the reference surface. Surface roughness did not have an appreciable effect, regardless of the other surface parameters present. Hydrophilic porous surfaces realized a slight HTC enhancement, while the HTC of hydrophobic porous surfaces was greatly reduced. Roughness had little effect on HTC. A second investigation used spot patterning aimed at creating a surface with optimal characteristics for both CHF and HTC. Hydrophobic spots (meant to be preferential nucleation sites) were patterned on a porous hydrophilic surface. The spots indeed were activated as nucleation sites, as recognized via the IR signal. However, CHF and HTC were not enhanced by the spots. In some instances, CHF was actually decreased by the spots, when compared to a homogenous porous hydrophilic surface.
Download or read book An Analytical and Experimental Study of the Thermal Boundary Layer and Ebullition Cycle in Nucleate Boiling written by Yih-Yun Hsu and published by . This book was released on 1961 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ebullition cycle of nucleate pool boiling from a heating strip was studied through the use of high-speed motion pictures of schlieren and shadowgraph images. The effects of bubble agitation on thermal layer and neighboring bubbles were observed. An over-all model of ebullition based upon experimental observation was proposed that included an analytical method for predicting bubble growth rate and an analysis of the factors that influence the magnitude of the waiting period (time interval between bubbles at a particular site). Thermal-layer thickness, cavity size, and area of influence of a growing bubble are considered. A film supplement is made available. (Author).
Download or read book Final Report written by Yan-Po Chang and published by . This book was released on 1961 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Boiling Heat Transfer And Two Phase Flow written by L S Tong and published by Routledge. This book was released on 2018-05-04 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completely updated, this graduate text describes the current state of boiling heat transfer and two-phase flow, in terms through which students can attain a consistent understanding. Prediction of real or potential boiling heat transfer behaviour, both in steady and transient states, is covered to aid engineering design of reliable and effective systems.
Download or read book Handbook of Thermal Science and Engineering written by and published by Springer. This book was released on 2018-07-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook provides researchers, faculty, design engineers in industrial R&D, and practicing engineers in the field concise treatments of advanced and more-recently established topics in thermal science and engineering, with an important emphasis on micro- and nanosystems, not covered in earlier references on applied thermal science, heat transfer or relevant aspects of mechanical/chemical engineering. Major sections address new developments in heat transfer, transport phenomena, single- and multiphase flows with energy transfer, thermal-bioengineering, thermal radiation, combined mode heat transfer, coupled heat and mass transfer, and energy systems. Energy transport at the macro-scale and micro/nano-scales is also included. The internationally recognized team of authors adopt a consistent and systematic approach and writing style, including ample cross reference among topics, offering readers a user-friendly knowledgebase greater than the sum of its parts, perfect for frequent consultation. The Handbook of Thermal Science and Engineering is ideal for academic and professional readers in the traditional and emerging areas of mechanical engineering, chemical engineering, aerospace engineering, bioengineering, electronics fabrication, energy, and manufacturing concerned with the influence thermal phenomena.
Download or read book Nucleate Boiling Heat Transfer to Liquid Nitrogen at Atmospheric Pressure written by Satish R. Parikh and published by . This book was released on 1966 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The object of this investigation was to study the effect of micro-roughness, a thin layer of oil, and infra-red radiations on the cylindrical heat transfer surface of copper, in liquid nitrogen and at atmospheric pressure during nucleate boiling. An attempt was made to find any possible effect of orientation of the heat transfer element on nucleate boiling. A number of different runs were taken with different degrees of roughness, and different orientation positions. Nucleate boiling has been found to be nearly independent of the heat transfer surface roughness and of orientation while strongly dependent on the chemical nature of the surface. Extremely high temperature differences were obtained in the nucleate boiling region by application of a thin layer of oil to the heat transfer surface. Temperature gradients in both the axial direction and the radial direction were found for the surface of the heat transfer element"--Abstract, leaf iii.
Download or read book Advances in Heat Transfer written by and published by Academic Press. This book was released on 1987-08-24 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Heat Transfer
Download or read book VDI Heat Atlas written by VDI Gesellschaft and published by Springer Science & Business Media. This book was released on 2010-07-21 with total page 1608 pages. Available in PDF, EPUB and Kindle. Book excerpt: For more than 50 years, the Springer VDI Heat Atlas has been an indispensable working means for engineers dealing with questions of heat transfer. Featuring 50% more content, this new edition covers most fields of heat transfer in industrial and engineering applications. It presents the interrelationships between basic scientific methods, experimental techniques, model-based analysis and their transfer to technical applications.
Download or read book Handbook of Phase Change written by S.G. Kandlikar and published by Routledge. This book was released on 2019-01-22 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive coverage of the basic phenomena. It contains twenty-five chapters which cover different aspects of boiling and condensation. First the specific topic or phenomenon is described, followed by a brief survey of previous work, a phenomenological model based on current understanding, and finally a set of recommended design equa
Download or read book Technical Abstract Bulletin written by and published by . This book was released on with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat Transfer and Fluid Flow in Minichannels and Microchannels written by Satish Kandlikar and published by Elsevier. This book was released on 2006 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: &Quot;This book explores flow through passages with hydraulic diameters from about 1 [mu]m to 3 mm, covering the range of minichannels and microchannels. Design equations along with solved examples and practice problems are also included to serve the needs of practicing engineers and students in a graduate course."--BOOK JACKET.
Download or read book Convective Flow Boiling written by John C. Chen and published by CRC Press. This book was released on 1996-07-01 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines current developments in the technology of flow boiling systems which are affected by convective flows. Written by acknowledged leaders in the field this book consists of revised papers presented at an international conference.
