Download or read book Fischer Tropsch Technology written by André Steynberg and published by Elsevier. This book was released on 2004-10-30 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fischer-Tropsch Technology is a unique book for its state-of-the-art approach to Fischer Tropsch (FT) technology. This book provides an explanation of the basic principles and terminology that are required to understand the application of FT technology. It also contains comprehensive references to patents and previous publications. As the first publication to focus on theory and application, it is a contemporary reference source for students studying chemistry and chemical engineering. Researchers and engineers active in the development of FT technology will also find this book an invaluable source of information. * Is the first publication to cover the theory and application for modern Fischer Tropsch technology * Contains comprehensive knowledge on all aspects relevant to the application of Fischer Tropsch technology* No other publication looks at past, present and future applications

Download or read book Surface Science written by K. Oura and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most important aspects of modern surface science are covered. All topics are presented in a concise and clear form accessible to a beginner. At the same time, the coverage is comprehensive and at a high technical level, with emphasis on the fundamental physical principles. Numerous examples, references, practice exercises, and problems complement this remarkably complete treatment, which will also serve as an excellent reference for researchers and practitioners. The textbook is idea for students in engineering and physical sciences.

Download or read book Modern Techniques of Surface Science written by D. P. Woodruff and published by Cambridge University Press. This book was released on 1994-03-03 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Revised and expanded second edition of the standard work on new techniques for studying solid surfaces.

Download or read book Colloid and Surface Research Trends written by Peter A. Fong and published by Nova Publishers. This book was released on 2007 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloid and surface science research spans a wide range of topics including biological interactions at surfaces, molecular assembly of selective surfaces, role of surface chemistry in microelectronics and catalysis, tribology, and colloidal physics in the context of crystallisation and suspensions; fluid interfaces; adsorption; surface aspects of catalysis; dispersion preparation, characterisation and stability; aerosols, foams and emulsions; surfaces forces; micelles and microemulsions; light scattering and spectroscopy; nanoparticles; new material science; detergency and wetting; thin films, liquid membranes and bilayers; surfactant science; polymer colloids; rheology of colloidal and disperse systems; electrical phenomena in interfacial and disperse systems. This book presents research in this dynamic field.

Download or read book Surface Science Techniques written by Gianangelo Bracco and published by Springer Science & Business Media. This book was released on 2013-01-11 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book describes the experimental techniques employed to study surfaces and interfaces. The emphasis is on the experimental method. Therefore all chapters start with an introduction of the scientific problem, the theory necessary to understand how the technique works and how to understand the results. Descriptions of real experimental setups, experimental results at different systems are given to show both the strength and the limits of the technique. In a final part the new developments and possible extensions of the techniques are presented. The included techniques provide microscopic as well as macroscopic information. They cover most of the techniques used in surface science.

Download or read book Surface Science written by Kurt W. Kolasinski and published by John Wiley & Sons. This book was released on 2008-04-30 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface chemistry is an essential and developing area of physical chemistry and one that has become increasingly interdisciplinary. The Second Edition of Surface Science: Foundations of Catalysis and Nanoscience has been fully revised and updated to reflect all the latest developments in the field and now includes an extensive discussion about nanoparticle growth and the quantum confinement effects in nanoscale systems. Two new chapters have been added and discuss The Liquid/Solid Interface and Non-Thermal Reactions, and Photon and Electron Stimulated Chemistry and Atom Manipulation. There are now many more worked examples included throughout to help students develop their problem-solving skills.

Download or read book Materials and Surface Engineering written by J. Paulo Davim and published by Elsevier. This book was released on 2012-02-17 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, the second in the Woodhead Publishing Reviews: Mechanical Engineering Series, is a collection of high quality articles (full research articles, review articles, and cases studies) with a special emphasis on research and development materials and surface engineering and its applications. Surface engineering techniques are being used in the automotive, aircraft, aerospace, missile, electronic, biomedical, textile, petrochemical, chemical, moulds and dies, machine tools, and construction industries. Materials science is an interdisciplinary field involving the micro and nano-structure, processing, properties of materials and its applications to various areas of engineering, technology and industry. This book addresses all types of materials, including metals and alloys, polymers, ceramics and glasses, composites, nano-materials, biomaterials, etc. The relationship between micro and nano-structure, processing, properties of materials is discussed. Surface engineering is a truly interdisciplinary topic in materials science that deals with the surface of solid matter. - Written by a highly knowledgeable and well-respected experts in the field - The diversity of the subjects of this book present a range of views based on international expertise

Download or read book Characterization and Chemical Modification of the Silica Surface written by E.F. Vansant and published by Elsevier. This book was released on 1995-04-25 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oxide surface materials are widely used in many applications, in particular where chemically modified oxide surfaces are involved. Indeed, in disciplines such as separation, catalysis, bioengineering, electronics, ceramics, etc., modified oxide surfaces are very important. In all cases, the knowledge of their chemical and surface characteristics is of great importance for the understanding and eventual improvement of their performances. This book reviews the latest techniques and procedures in the characterization and chemical modification of the silica surface, presenting a unified and state-of-the-art approach to the relevant analysis techniques and modification procedures, covering 1000 references integrated into one clear concept.

Download or read book Current Trends of Surface Science and Catalysis written by Jeong Young Park and published by Springer Science & Business Media. This book was released on 2013-10-23 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book covers the latest surface science studies on model catalysts, including single crystals, non-colloidal nanocatalysts, and nanoparticles in various forms with the control of size, shape and composition. This book addresses the issue of bridging “materials and pressure gaps” and also discusses the important issue of metal-oxide interface and hot electron flows in heterogeneous catalysis. The current development of in-situ surface techniques that is relevant to bridging “pressure gaps” is also highlighted.

Download or read book Experimental Innovations in Surface Science written by John T. Yates Jr. and published by Springer. This book was released on 2015-08-17 with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a new edition of a classic text on experimental methods and instruments in surface science. It offers practical insight useful to chemists, physicists, and materials scientists working in experimental surface science. This enlarged second edition contains almost 300 descriptions of experimental methods. The more than 50 active areas with individual scientific and measurement concepts and activities relevant to each area are presented in this book. The key areas covered are: Vacuum System Technology, Mechanical Fabrication Techniques, Measurement Methods, Thermal Control, Delivery of Adsorbates to Surfaces, UHV Windows, Surface Preparation Methods, High Area Solids, Safety. The book is written for researchers and graduate students.

Download or read book Physical Structure written by and published by Elsevier. This book was released on 1996-12-06 with total page 901 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary goal of this book is to summarize the current level of accumulated knowledge about the physical structure of solid surfaces with emphasis on well-defined surfaces at the gas-solid and vacuum-solid interfaces. The intention is not only to provide a standard reference for practitioners, but also to provide a good starting point for scientists who are just entering the field. The presentation in most of the chapters therefore assumes that the typical reader will have a good undergraduate background in chemistry, physics, or materials science. At the same time, coverage is comprehensive and at a high technical level with emphasis on fundamental physical principles. This first volume in a new series is appropriately devoted to the physical structure of surfaces, knowledge of which will be essential for a complete understanding of electronic properties and dynamical processes, the topics of the next two volumes in the series.The volume is divided into four parts. Part I describes the equilibrium properties of surfaces with emphasis on clean surfaces of bulk materials. Part II provides an introduction to some of the primary experimental methods that are used to determine surface crystal structures. Part III gives an overview of the vast topic of the structure of adsorbed layers. The concluding Part IV deals with the topics of defects in surface structures and phase transitions.

Download or read book Surface Analysis Methods in Materials Science written by John O'Connor and published by Springer Science & Business Media. This book was released on 2003-04-23 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide to the use of surface analysis techniques, now in its second edition, has expanded to include more techniques, current applications and updated references. It outlines the application of surface analysis techniques to a broad range of studies in materials science and engineering. The book consists of three parts: an extensive introduction to the concepts of surface structure and composition, a techniques section describing 19 techniques and a section on applications. This book is aimed at industrial scientists and engineers in research and development. The level and content of this book make it ideal as a course text for senior undergraduate and postgraduate students in materials science, materials engineering, physics, chemistry and metallurgy.

Download or read book Spillover and Mobility of Species on Solid Surfaces written by A. Guerrero-Ruiz and published by Elsevier. This book was released on 2001-08-02 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Spillover and Mobility of Species and Solid Surfaces" collects the papers which were presented at the Fifth International Conference Spillover, either as oral or poster contributions, as well as the summaries of the invited lectures. This congress and its publication in the Studies on Surface Science and Catalysis series follow the tradition of previous conferences on spillover, initiated in Lyon, 1983, and continued in Leipzig, 1989, Kyoto 1993 and Dalian, 1997. For the fifth conference, held in S.L. el Escorial (Madrid), the organising committee has attempted to compile representative contributions which illustrate the advances in understanding the spillover phenomenon since 1997. Spillover is a process taking place during the interface of gas reactant molecules (mainly hydrogen and oxygen) on solid surfaces. However, different contributions to the more general area of the chemistry at surfaces, related with the mobility and migration of species, diffusion through membranes, fuel cell catalysts, etc., have also been included. In fact the title of the present volume summarizes this attempt to extend the conference topics towards dynamics at surfaces.Among the 70 contributions received, the 56 accepted papers were selected on the basis of the reports of at least two international reviewers, according to standards comparable to those applied for other specialised journals. These papers are from 21 different countries.

Download or read book Biomaterials Surface Science written by Andreas Taubert and published by John Wiley & Sons. This book was released on 2013-07-23 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: At the interface of biology, chemistry, and materials science, this book provides an overview of this vibrant research field, treating the seemingly distinct disciplines in a unified way by adopting the common viewpoint of surface science. The editors, themselves prolific researchers, have assembled here a team of top-notch international scientists who read like a "who's who" of biomaterials science and engineering. They cover topics ranging from micro- and nanostructuring for imparting functionality in a top-down manner to the bottom-up fabrication of gradient surfaces by self-assembly, from interfaces between biomaterials and living matter to smart, stimuli-responsive surfaces, and from cell and surface mechanics to the elucidation of cell-chip interactions in biomedical devices. As a result, the book explains the complex interplay of cell behavior and the physics and materials science of artificial devices. Of equal interest to young, ambitious scientists as well as to experienced researchers.

Download or read book Surface Wave Analysis for Near Surface Applications written by Giancarlo Dal Moro and published by Elsevier. This book was released on 2014-11-04 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seismic Wave Analysis for Near Surface Applications presents the foundational tools necessary to properly analyze surface waves acquired according to both active and passive techniques. Applications range from seismic hazard studies, geotechnical surveys and the exploration of extra-terrestrial bodies. Surface waves have become critical to near-surface geophysics both for geotechnical goals and seismic-hazard studies. Included in this book are the related theories, approaches and applications which the lead editor has assembled from a range of authored contributions carefully selected from the latest developments in research. A unique blend of theory and practice, the book's concepts are based on exhaustive field research conducted over the past decade from the world's leading seismologists and geophysicists. - Edited by a geophysicist with nearly 20 years of experience in research, consulting, and geoscience software development - Nearly 100 figures, photographs, and examples aid in the understanding of fundamental concepts and techniques - Presents the latest research in seismic wave characteristics and analysis, the fundamentals of signal processing, wave data acquisition and inversion, and the latest developments in horizontal-to-vertical spectral ratio (HVSR) - Each chapter features a real-world case study—13 in all—to bring the book's key principles to life

Download or read book Surface Science and Adhesion in Cosmetics written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2021-04-06 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: Activity in the arena of surface chemistry and adhesion aspects in cosmetics is substantial, but the information is scattered in many diverse publications media and no book exists which discusses surface chemistry and adhesion in cosmetics in unified manner. This book containing 15 chapters written by eminent researchers from academia and industry is divided into three parts: Part 1: General Topics; Part 2: Surface Chemistry Aspects; and Part 3: Wetting and Adhesion Aspects. The topics covered include: Lip biophysical properties and characterization; use of advanced silicone materials in long-lasting cosmetics; non-aqueous dispersions of acrylate copolymers in lipsticks; cosmetic oils in Lipstick structure; chemical structure of the hair surface, surface forces and interactions; AFM for hair surface characterization; application of AFM in characterizing hair, skin and cosmetic deposition; SIMS as a surface analysis method for hair, skin and cosmetics; surface tensiometry approach to characterize cosmetic products; spreading of hairsprays on hair; color transfer from long-wear face foundation products; interaction of polyelectrolytes and surfactants on hair surfaces; cosmetic adhesion to facial skin; and adhesion aspects in semi-permanent mascara; lipstick adhesion measurement.

Download or read book Materials Surface Processing by Directed Energy Techniques written by Yves Pauleau and published by Elsevier. This book was released on 2006-04-25 with total page 745 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current status of the science and technology related to coatings, thin films and surface modifications produced by directed energy techniques is assessed in Materials Surface Processing by Directed Energy Techniques. The subject matter is divided into 20 chapters - each presented at a tutorial level – rich with fundamental science and experimental results. New trends and new results are also evoked to give an overview of future developments and applications. - Provides a broad overview on modern coating and thin film deposition techniques, and their applications - Presents and discusses various problems of physics and chemistry involved in the production, characterization and applications of coatings and thin films - Each chapter includes experimental results illustrating various models, mechanisms or theories