Download or read book Surface Profiling and Jacking Force for Guided Boring Method written by Md. Tareq H. Khondoker and published by . This book was released on 2016 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: Trenchless technology has brought a new era in pipeline installation, overtaking the customary open cut method. Several new trenchless installation techniques are now practicable, among which Guided Boring Method (GBM), pipe jacking and microtunnelling are most remarkable. All these methods are performed by jacking. In spite of having numerous advantages, some aspects associated with the aforementioned trenchless methods still need to be improved. GBM is one of the most widely used trenchless techniques to install pipelines with grade precision. As the length of these projects is much smaller than other underground projects (e.g. tunnels), conducting geotechnical investigations for GBM becomes unjustified at times due to budget constraints. Therefore, contractors will often conduct GBM installations without performing a proper subsurface investigation, which may lead to unusual consequences for the project. Since GBM consists of an initial pilot tube installation with further borehole reaming, the drilling parameters during the pilot tube installation phase may be used for subsurface profiling, which can help operators select proper drilling tools for the next reaming stages. This thesis firstly investigates the effectiveness of drilling parameters during pilot tube installation for subsurface profiling using drilling indices for a GBM project in Edmonton, Alberta, Canada. Five drilling indices, which were proposed for vertical drilling, were used to obtain the comparative strength of soil throughout the drive length. The results indicated that all five indices could identify the soil transitions in the drive length. However, the indices can only give a comparative strength measurement of soil throughout the drive length, not the exact soil strength. Vertical earth load on pipes is an important aspect as it largely affects the jacking force during pipe jacking/microtunnelling. Although there are several methods to determine the normal load, the difference among them in calculating vertical normal stress is quite large. This thesis secondly provides an extensive analysis of nine different models/standards and their variations based on experimental data as well as a parametric study. The results show that some models predicted normal stress values close to the measured value, while the others give much higher or lower value than the measurement. This discrepancy of calculated normal stress using different methods from measured value is due to the variation of assumptions of different parameters. To identify the influence of parameters on normal stress, a parametric study is also conducted to reveal the effect of different parameters on arching factor as well as normal earth stress.
Download or read book Water Services Management written by David Stephenson and published by IWA Publishing. This book was released on 2005-03-01 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water services include water supply, sewerage and stormwater drainage. The facilities needed for these services are pipelines, reservoirs and treatment works; but the service goes beyond the infrastructure. It includes economics, billing, and business management. Although these services exist in every city, being advanced by the growing use of automation and information technology, costs are also increasing without many consumers seeing increased benefits. Customer service is therefore becoming important to the industry. Water Services Management is intended to educate engineers to manage and improve water services, rather than simply designing and constructing treatment works and distribution systems. The text covers water supply and drainage from the hydraulic and economic points of view, and while design and construction practices are reviewed, the focus of the book is on improving existing systems to turn the emerging industry into an attractive business. Topics covered include: Potable water supply, sewerage and stormwater drainage. Hydraulic management: storage, peak flow attenuation and pumping. Water quality: standards, pollution control and treatment. Infrastructure management: rehabilitation, reconstruction, upgrading and maintenance. Economic efficiency: asset management, privatization, and risk analysis. Improving economic viability via efficient use of energy and construction project management. Characteristics encountered in developing countries are also considered, including: Low cost sanitation, water supply standards and off-grid energy sources. Capacity building and appropriate technologies. Financing, operation and benchmarking.
Download or read book Trenchless Installation of Conduits Beneath Roadways written by Tom Iseley and published by Transportation Research Board. This book was released on 1997 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: This synthesis will be of interest to geologists; geotechnical, construction, and maintenance engineers; other state department of transportation (DOT) personnel involved with the planning, design, and permit issuance for conduits beneath roadways; local transportation agencies; utility contractors and consultants; and trenchless construction equipment manufacturers. It describes the current state of the practice for the use of trenchless technology for installing conduits beneath roadways. Trenchless construction is a process of installing, rehabilitating, or replacing underground utility systems without open-cut excavation. The synthesis is focused on trenchless technology for new installations. This report of the Transportation Research Board describes the trenchless installation technologies (methods, materials, and equipment) currently employed by state DOTs and other agencies to install conduits beneath roadways. The synthesis presents data obtained from a review of the literature and a survey of transportation agencies. For each technology identified, information is provided to describe the range of applications, basis for technique selection, site specific design factors to be considered, relative costs, common environmental issues, and example specifications. In addition, information on emerging technologies and research needs is presented.
Download or read book Synthesis of Highway Practice written by National Cooperative Highway Research Program and published by . This book was released on 1997 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Trenchless Technology written by Mohammad Najafi and published by McGraw Hill Professional. This book was released on 2005-01-17 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Trenchless technology allows for the installation or renewal of underground utility systems with minimum disruption of the surface. As water and wastewater systems age or must be redesigned in order to comply with environmental regulations, the demand for this technology has dramatically increased. This is a detailed reference covering construction details, design guidelines, environmental concerns, and the latest advances in equipment, methods, and materials. * Design and analysis procedures * Design equations * Risk assessment * Soil compatibility and more
Download or read book Cal OSHA Pocket Guide for the Construction Industry written by and published by . This book was released on 2015-01-05 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The Cal/OSHA Pocket Guide for the Construction Industry is a handy guide for workers, employers, supervisors, and safety personnel. This latest 2011 edition is a quick field reference that summarizes selected safety standards from the California Code of Regulations. The major subject headings are alphabetized and cross-referenced within the text, and it has a detailed index. Spiral bound, 8.5 x 5.5"
Download or read book Superpave Mix Design written by Asphalt Institute and published by . This book was released on 2001-01-01 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Tribology Handbook written by Michael J Neale and published by Elsevier. This book was released on 1995-12-15 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: The renowned reference work is a practical guide to the selection and design of the components of machines and to their lubrication. It has been completely revised for this second edition by leading experts in the area.
Download or read book Pile Design and Construction Practice written by Willis H. Thomas and published by CRC Press. This book was released on 2007-12-06 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This international handbook is essential for geotechnical engineers and engineering geologists responsible for designing and constructing piled foundations. It explains general principles and practice and details current types of pile, piling equipment and methods. It includes calculations of the resistance of piles to compressive loads, pile group
Download or read book Foundation Design Principles and Practices written by Donald P. Coduto and published by Pearson Higher Ed. This book was released on 2013-10-03 with total page 889 pages. Available in PDF, EPUB and Kindle. Book excerpt: For undergraduate/graduate-level foundation engineering courses. Covers the subject matter thoroughly and systematically, while being easy to read. Emphasizes a thorough understanding of concepts and terms before proceeding with analysis and design, and carefully integrates the principles of foundation engineering with their application to practical design problems.
Download or read book Standard Construction Guidelines for Microtunneling written by and published by Amer Society of Civil Engineers. This book was released on 2001-01-01 with total page 41 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard Guideline covers the planning, design, pipe materials, and construction of microtunneling. Microtunneling is defined as a trenchless construction method for installing pipelines. The North American definition of microtunneling describes a method and does not impose size limitations on that method. The tunnel may be considered a microtunnel if all of the following features apply to construction: the microtunneling boring machine is remote controlled, a laser guidance system is employed, a jacking system is used for thrust, and continuous pressure is provided to the face of the excavation to balance groundwater and earth pressures. This Standard Guideline is a vital reference for owners, engineers, contractors, and construction managers.
Download or read book Basic Methods of Policy Analysis and Planning written by Carl Patton and published by Routledge. This book was released on 2015-08-26 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated in its 3rd edition, Basic Methods of Policy Analysis and Planning presents quickly applied methods for analyzing and resolving planning and policy issues at state, regional, and urban levels. Divided into two parts, Methods which presents quick methods in nine chapters and is organized around the steps in the policy analysis process, and Cases which presents seven policy cases, ranging in degree of complexity, the text provides readers with the resources they need for effective policy planning and analysis. Quantitative and qualitative methods are systematically combined to address policy dilemmas and urban planning problems. Readers and analysts utilizing this text gain comprehensive skills and background needed to impact public policy.
Download or read book Rock Foundations written by United States. Army. Corps of Engineers and published by . This book was released on 1994 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Tunnel Construction written by David Chapman and published by CRC Press. This book was released on 2017-11-27 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tunnelling provides a robust solution to a variety of engineering challenges. It is a complex process, which requires a firm understanding of the ground conditions as well as the importance of ground-structure interaction. This book covers the full range of areas related to tunnel construction required to embark upon a career in tunnelling. It also includes a number of case studies related to real tunnel projects, to demonstrate how the theory applies in practice. New features of this second edition include: the introduction of a case study related to Crossrail’s project in London, focussing on the Whitechapel and Liverpool Street station tunnels and including considerations of building tunnels in a congested urban area; and further information on recent developments in tunnel boring machines, including further examples of all the different types of machine as well as multi-mode machines. The coverage includes: Both hard-rock and soft-ground conditions Site investigation, parameter selection, and design considerations Methods of improving the stability of the ground and lining techniques Descriptions of the various main tunnelling techniques Health and safety considerations Monitoring of tunnels during construction Description of the latest tunnel boring machines Case studies with real examples, including Crossrail’s project in London Clear, concise, and heavily illustrated, this is a vital text for final-year undergraduate and MSc students and an invaluable starting point for young professionals and novices in tunnelling.
Download or read book Highway and Rail Transit Tunnel Inspection Manual written by and published by . This book was released on 2005 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanised Shield Tunnelling written by Bernhard Maidl and published by John Wiley & Sons. This book was released on 2013-05-20 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanised shield tunnelling has developed considerably since the publication of the first edition of this book. Challenging tunnel projects under difficult conditions demand innovative solutions, which has led to constant further development and innovation in process technology, constructions operations and the machines and materials used. The book collects the latest state of technology in mechanised shield tunnelling. It describes the basics of mechanised tunnelling technology and the various types of machines and gives calculation methods and constructural advice. Further chapters cover excavation tools, muck handling, tunnel support, surveying and steering as well as workplace safety. There is also detailled information about contractual aspects and process controlling.
Download or read book Backpacker written by and published by . This book was released on 2007-09 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: Backpacker brings the outdoors straight to the reader's doorstep, inspiring and enabling them to go more places and enjoy nature more often. The authority on active adventure, Backpacker is the world's first GPS-enabled magazine, and the only magazine whose editors personally test the hiking trails, camping gear, and survival tips they publish. Backpacker's Editors' Choice Awards, an industry honor recognizing design, feature and product innovation, has become the gold standard against which all other outdoor-industry awards are measured.
