Download or read book Surface Modification to Improve Properties of Materials written by Miran Mozetič and published by MDPI. This book was released on 2019-04-16 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains selected contributions on surface modification to improve the properties of solid materials. The surface properties are tailored either by functionalization, etching, or deposition of a thin coating. Functionalization is achieved by a brief treatment with non-equilibrium gaseous plasma containing suitable radicals that interact chemically with the material surface and thus enable the formation of rather stable functional groups. Etching is performed in order to modify the surface morphology. The etching parameters are selected in such a way that a rich morphology of the surfaces is achieved spontaneously on the sub-micrometer scale, without using masks. The combination of adequate surface morphology and functionalization of materials leads to superior surface properties which are particularly beneficial for the desired response upon incubation with biological matter. Alternatively, the materials are coated with a suitable thin film that is useful in various applications from food to aerospace industries.

Download or read book Surface Modification to Improve Properties of Materials written by Miran Mozeti? and published by . This book was released on 2019 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains selected contributions on surface modification to improve the properties of solid materials. The surface properties are tailored either by functionalization, etching, or deposition of a thin coating. Functionalization is achieved by a brief treatment with non-equilibrium gaseous plasma containing suitable radicals that interact chemically with the material surface and thus enable the formation of rather stable functional groups. Etching is performed in order to modify the surface morphology. The etching parameters are selected in such a way that a rich morphology of the surfaces is achieved spontaneously on the sub-micrometer scale, without using masks. The combination of adequate surface morphology and functionalization of materials leads to superior surface properties which are particularly beneficial for the desired response upon incubation with biological matter. Alternatively, the materials are coated with a suitable thin film that is useful in various applications from food to aerospace industries.

Download or read book Surface Modification by Solid State Processing written by Rosa M. Miranda and published by Woodhead Publishing. This book was released on 2013-10-31 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Modification by Solid State Processing describes friction-based surfacing techniques for surface modification to improve resistance to corrosion and wear, also changing surface chemistry. Surface conditions are increasingly demanding in industrial applications and surface modification can reduce manufacturing and maintenance costs, leading to improved component performance, reliability and lifetime. Friction-based technologies are promising solid state processing technologies, particularly for light alloys, in the manufacturing of composite surface and functionally graded materials This title is divided into five chapters, and after an introduction the book covers friction surfacing; friction stir processing; surface reinforcements of light alloys; and characterization techniques based on eddy currents. Describes friction-based surfacing techniques for surface modification to improve resistance to corrosion and wear, and change surface chemistry Emphasizes industrial applications Describes existing and emerging techniques

Download or read book Concepts and Design of Materials Nanoarchitectonics written by Omar Azzaroni and published by Royal Society of Chemistry. This book was released on 2022-02-09 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: The concept of nanoarchitechtonics was introduced to describe the correct manipulation of nanoscale materials in the creation of nano-devices and applications. Nanoarchitectonics has begun to spread into many fields including nanostructured materials synthesis, supramolecular assembly, nanoscale structural fabrications, materials hybridizations, materials and structures for energy and environmental sciences, device and physical application, and bio- and medical applications. Following on from the 2012 title Manipulation of Nanoscale Materials, Concepts and Design of Materials Nanoarchitectonics covers the introductory features underlying the field, presenting a unifying overview of the theoretical aspects and emerging applications that are changing the capability to understand and design advanced functional materials. Edited by pioneers of the field, this book will appeal to researchers working in nanoscience, materials science, supramolecular chemistry, physical chemistry and organic chemistry, as well as graduate students in these areas.

Download or read book Handbook of Surface Improvement and Modification written by George Wypych and published by Elsevier. This book was released on 2023-02-07 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Surface Improvement and Modification, Second Edition covers additives and the modification processes that determine the surface properties of many materials. These additives can modify or improve scratch and mar resistance, improve gloss or flatten the surface, increase or decrease tack and inhibit staining. Mechanisms of damage, protection and property improvements are also discussed, making this an essential handbook for engineers, researchers and technicians interested in using additives to modify and improve the surface properties of materials. A companion book, Databook of Surface Modification and Additives, is also available with more information on the additives commercially available to improve materials. Focuses on the improvement of surface properties, with detailed coverage of the additives used, including the process of selection and examples of application Presents the mechanisms of damage, protection and property improvements based on research data Aids the user in formulating products that fit specific requirements and applications

Download or read book Surface Modification of Biomaterials written by Rachel Williams and published by Elsevier. This book was released on 2010-11-25 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: The surface modification of biomaterials plays a significant role in determining the outcome of biological-material interactions. With the appropriate modification a material’s surface can be tailored to improve biocompatibility, adhesion and cell interactions. Consequently surface modification is vital in the development and design of new biomaterials and medical devices. Surface modification of biomaterials reviews both established surface modifications and those still in the early stages of research and discusses how they can be used to optimise biological interactions and enhance clinical performance.Part one begins with chapters looking at various types and techniques of surface modification including plasma polymerisation, covalent binding of poly (ethylene glycol) (PEG), heparinisation, peptide functionalisation and calcium phosphate deposition before going on to examine metal surface oxidation and biomaterial surface topography to control cellular response with particular reference to technologies, cell behaviour and biomedical applications. Part two studies the analytical techniques and applications of surface modification with chapters on analysing biomaterial surface chemistry, surface structure, morphology and topography before moving onto discuss modifying biomaterial surfaces to optimise interactions with blood, control infection, optimise interactions with soft tissues, repair and regenerate nerve cells, control stem cell growth and differentiation and to optimise interactions with bone.The distinguished editor and international team of contributors to Surface modification of biomaterials have produced a unique overview and detailed chapters on a range of surface modification techniques which will provide an excellent resource for biomaterials researchers and scientists and engineers concerned with improving the properties of biomaterials. It will also be beneficial for academics researching surface modification. Reviews both established surface modifications and those still in the early stages of research and how they can be used to optimise biological interactions and enhance clinical performance Studies analytical techniques and applications of surface modification with chapters assessing biomaterial surface chemistry, surface structure, morphology and topography Discusses modifying biomaterial surfaces to optimise interactions with blood and soft tissues and also to repair and regenerate nerve cells and control infection

Download or read book Surface Treatments for Improved Performance and Properties written by John J. Burke and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Army Materials and Mechanics Research Center in coop eration with the Materials Science Group of the Department of Chemical Engineering and Materials Science of Syracuse University has been conducting the Annual Sagamore Army Materials Research Conference since 1954. The specific purpose of these conferences has been to bring together over 150 scientists and engineers from academic institutions, industry and government who are uniquely qualified to explore in depth a subject of importance to the Department of Defense, the Army and the scientific community. These proceedings, entitled SURFACE TREATMENTS FOR IM PROVED PERFORMANCE AND PROPERTIES, address the Physical and Chemical Characteristics of Surfaces, Emerging Surface Modi fication Techniques, Surface Structure and Mechanical Proper ties, and Relationships between Properties and Processing for Non-metric Materials. We wish to acknowledge the dedicated assistance of JoseDh M. Bernier of the Army Materials and Mechanics Research Center and Helen Brown DeMascio of Syracuse University throughout the stages of the conference planning and finally the publication of this book. The continued active interest and support of these con ferences by Dr. E. Wright, Director of the Army Materials and Mechanics Research Center, is appreciated. Syracuse University Syracuse, New York The Editors vii CONTENTS SESSION I 1. Surface Modification for Improved Properties. . . . . . .. 3 P. A. Parrish SESSION II PHYSICAL AND CHEMICAL CHARACTERISTICS OF SURFACES P. Ficalora, Moderator 2. Characterization of Surfaces. 19 H. K. Herglotz 3. Reaction Kinetics 51 J. B. Hudson 4. Surfac e Treatments for Enhanced Bonding Between Inorganic Surfaces and Polymers ........ .

Download or read book Polymer Surface Modification written by K. L. Mittal and published by BRILL. This book was released on 2009-02-28 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of polymer surface modification is of tremendous contemporary interest because of its critical importance in many and varied technological applications where polymers are used. Currently there is brisk research activity in unraveling the mechanisms of surface modification and finding ways to prolong the life of surface treatment. Also there is acute interest and need to devise new, improved and economical means to modify polymer surfaces. This book is divided into three parts as follows: Part 1: Surface Modification Techniques; Part 2: Interfacial Aspects and Adhesion; Part 3: General Papers. The topics covered include: various techniques for surface modification including plasma (both vacuum and atmospheric pressure), ozone, photografting, UV photo-oxidation, laser, use of charged particles and others for a variety of polymers; longevity of surface treatment; hydrophobic recovery; fabrication of high-density polymer nano-dots; immobilization of organometallic catalysts on textile carrier materials; polymer membrane antifouling properties; electroless metallization of polymers; effects of surface modification on interfacial shear strength of composites, cord/rubber adhesion, adhesion of UV-curable coatings and attachment of hyperbranched polymers; plasma polymerization; block copolymers; application of plasma technology in decontamination of heat-sensitive polymer surfaces. In essence this book reflects the current state-of-the-knowledge in the arena and represents the work of many renowned scientists and technologists. It should be of interest to anyone with a desire or need to learn the latest R&D activity in this domain and the information contained here should be very valuable in deciding the optimum surface modification technique for his/her particular requirements.

Download or read book Modern Surface Engineering Treatments written by Mahmood Aliofkhazraei and published by BoD – Books on Demand. This book was released on 2013-05-22 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface engineering can be defined as an enabling technology used in a wide range of industrial activities. Surface engineering was founded by detecting surface features which destroy most of pieces, e.g. abrasion, corrosion, fatigue, and disruption; then it was recognized, more than ever, that most technological advancements are constrained with surface requirements. In a wide range of industry (such as gas and oil exploitation, mining, and manufacturing), the surfaces generate an important problem in technological advancement. Passing time shows us new interesting methods in surface engineering. These methods usually apply to enhance the surface properties, e.g. wear rate, fatigue, abrasion, and corrosion resistance. This book collects some of new methods in surface engineering.

Download or read book Surface Modification Technologies written by Antonello Astarita and published by Trans Tech Publications Ltd. This book was released on 2019-07-22 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a collection of the papers and the keynote lectures presented at the 33rd Surface Modification Technologies Conference (SMT33) which was held in Naples on 26 to 28 June 2019. The conference was focused on surface engineering and covered the following areas: corrosion, treatments, characterization, additive manufacturing, coatings, modification technologies. This book transfers up-to-date knowledge from scientist and experts to the common practice, representing a valuable resource for engineers, designers, researchers, and students.

Download or read book Surface Modification of Metals and Alloys written by Nuria Llorca-Isern and published by . This book was released on 2021 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently, the scientific community has deemed surface modification to be necessary because the surface properties of new materials are usually inadequate in terms of wettability, adhesion, corrosion resistance, or even drag reduction. In order to modify solid surfaces such as metals and alloys, different treatments have been used to obtain a desired surface finish, including chemical vapor deposition, physical vapor deposition, chemical etching, electrodeposition, or the application of non-equilibrium gaseous media, especially gaseous plasma. These treatments promote changes in roughness, hydrophobicity, biocompatibility, or reactivity. Although such treatments have been studied extensively over the past decades and even commercialized, the exact mechanisms of the interaction between reactive gaseous species and solid materials are still inadequately understood. Moreover, for various reasons, it is difficult to find an alloy with a surface behavior that differs from that of the bulk. A frequent goal of surface modification is to obtain a greater or more specific resistance to extreme environments, including resistance to corrosion and wear; higher mechanical or fatigue resistance; hydrophobicity; oleophilicity; or thermal (for low or high temperature exposure), magnetic, electrical, or specific optic or light exposure behavior. Another objective is to increase biocompatibility, prevent (bio)fouling, or both. In order to achieve and improve these properties in metals and alloys, the strategy of surface modification must be applied on the basis of direct action on the metal or the incorporation of a coating that will provide these properties or functionalize its surface to meet complex requirements.

Download or read book Polymer Surface Modification Relevance to Adhesion written by Kash L. Mittal and published by CRC Press. This book was released on 2004-08-26 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book documents the proceedings of the Fourth International Symposium on Polymer Surface Modification: Relevance to Adhesion held under the auspices of MST Conferences, LLC in Orlando, FL, June 9-11, 2003. Polymers are used for a variety of purposes in a host of technological applications and even a cursory look at the literature will evince that currently there is tremendous interest and R&D activity in the area of polymer surface modification to attain their desired surface characteristics, particularly to enhance their adhesion. This volume contains a total of 25 papers which were properly peer reviewed, revised and edited. So this book is not merely a collection of papers, rather represents the highest standard of publication. The book is divided into three parts: 1. Plasma Surface Modification Techniques; 2. Other / Miscellaneous Surface Modification Techniques; and 3. General Papers. The topics covered include: low pressure plasma surface modification of a variety of polymers using various gases; atmospheric pressure plasma treatment; improvement of stain release properties of fabrics; modification of electrostatic properties of polymers; photon-based processes for surface modification of fibers; excimer UV light treatment; excimer laser surface treatment; low-energy ion treatment; photo-grafting and photo-curing; metallization of treated polymers; chemical (wet) functionalization of polymers; adhesion of paints to thermoplastic substrates; polymer release surfaces; nanolithography in polymer films; gas barrier properties of ceramic layers on polymers; and modification of interphase layer and relevance to adhesion. This volume and its predecessors containing plentiful information should serve as a comprehensive source of latest R&D activity in the highly technologically important arena of polymer surface modification. Anyone interested –centrally or peripherally– in knowing or learning about the various ways to modify polymer surfaces should find this book of immense value.

Download or read book Surface Engineering written by Dheerendra Kumar Dwivedi and published by Springer. This book was released on 2018-04-04 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to help engineers analyze service condition and potential mechanisms of surface degradation. This will enable engineers select suitable materials for improved service-life and performance of engineering components. The book comprises 7 chapters, and is well illustrated with schematics, photographs, microstructure, XRD patterns, EDAX mapping, and technical data tables. The book focuses on the influence of materials and methods of surface engineering on structure, properties, and wear-performance of engineering components. It begins with the need to study the subject of surface engineering, scope of surface engineering, and classification of techniques of surface engineering. The book covers conventional material system (steel, cast iron, stellite, WC-Co, PCDs, etc.) and new materials like multilayer structures, functionally gradient materials (FGMs), intermetallic barrier coatings, and thermal barrier coating. The book covers most conventional as well as advanced surface engineering techniques, such as burnishing, shot peening, flame and induction hardening, laser and electron beam hardening, plasma and TIG melting, carburizing, nitriding, cyaniding, boronizing, vanadizing, ion implantation, laser alloying, chemical vapor deposition, PE chemical vapor deposition, physical vapor deposition, weld overlays, laser cladding, hot dip galvanizing, hot dip lead tin coating, hot dip aluminizing, hot dip chromizing, electroplating, electroless plating (Ni-P and Ni-B), mechanical plating, roll bonding, explosive bonding, and hot isostatic. The book also includes an introductory chapter on friction-stir processing of aluminum and titanium alloys. Further, it discusses studies on structure, mechanical and wear properties of weld surfacing, flame spray coating, HVOF sprayed coating, laser cladding of ferrous metals, nickel and cobalt based alloys and their composites in as-sprayed and heat-treated conditions. The book provides a comprehensive overview of various destructive and nondestructive techniques used for characterization of engineered surfaces. The materials in the book will be useful to undergraduate and graduate students. In addition, the contents of this book can also be used for professional development courses for practicing engineers.

Download or read book Modification of Polymer Properties written by Carlos Federico Jasso-Gastinel and published by William Andrew. This book was released on 2016-09-14 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modification of Polymer Properties provides, for the first time, in one title, the latest information on gradient IPNs and gradient copolymers. The book covers the broad range of polymer modification routes in a fresh, current view representing a timely addition to the technical literature of this important area. Historically, blends, copolymers, or filled polymers have been developed to meet specific properties, or to optimize the cost/properties relationship. Using the gradient structure approach with conventional radical polymerization, it has been shown that it is possible to optimize properties if appropriate gradients in the composition of copolymer chains are obtained. An overview of the gradient structure approach for designing polymers has not appeared in the recent literature and this title covers the different methods used to modify properties, offering the whole range of ways to modify polymers in just one volume and making this an attractive option for a wide audience of practitioners. The approach for each chapter is to explain the fundamental principles of preparation, cover properties modification, describe future research and applications as examples of materials that may be prepared for specific applications, or that are already in use, in present day applications. The book is for readers that have a basic background in polymer science, as well as those interested in the different ways to combine or modify polymer properties. Provides an integrated view on how to modify polymer properties Presents the entire panorama of polymer properties modification in one reference, covering the essential information in each topic Includes the optimization of properties using gradients in polymers composition or structure

Download or read book Surface Modification of Metals and Alloys written by Oriol Rius-Ayra and published by MDPI. This book was released on 2021-08-31 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past four decades, there has been increased attention given to the research of fluid mechanics due to its wide application in industry and phycology. Major advances in the modeling of key topics such Newtonian and non-Newtonian fluids and thin film flows have been made and finally published in the Special Issue of coatings. This is an attempt to edit the Special Issue into a book. Although this book is not a formal textbook, it will definitely be useful for university teachers, research students, industrial researchers and in overcoming the difficulties occurring in the said topic, while dealing with the nonlinear governing equations. For such types of equations, it is often more difficult to find an analytical solution or even a numerical one. This book has successfully handled this challenging job with the latest techniques. In addition, the findings of the simulation are logically realistic and meet the standard of sufficient scientific value.

Download or read book Surface Modification and Functionalization of Ceramic Composites written by Rajan Jose and published by Elsevier. This book was released on 2023-03-23 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Modification and Functionalization of Ceramic Composites is intended for both experts and beginners, allowing them to have an extended overview of recent progress in the evolution of surface modification methods and functionalization for ceramic composites. The book provides a detailed summary of the various techniques that are currently available, along with an evaluation of the costs involved. Information on the relationship between surface properties and function is also discussed. There is also an additional section on commercial and industrial applications, including biomedical, sensing and energy. The book will be a valuable reference resource for researchers and an instructive and stimulating text for postgraduate students who want to enhance their knowledge on novel materials and surface modification and functionalization of ceramic composites. Extensively covers surface modification and functionalization of ceramic composites A detailed review of the various techniques currently available and an evaluation of costs Covers recent advances and a broad range of different industrial applications

Download or read book Polymer Surface Modification to Enhance Adhesion written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2024-03-01 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: POLYMER SURFACE MODIFICATION TO ENHANCE ADHESION This unique, comprehensive and groundbreaking book is the first on this important subject. Polymer Surface Modification to Enhance Adhesion comprises 13 chapters and is divided into two parts: Part 1: Energetic Treatments; and Part 2: Chemical Treatments. Topics covered include atmospheric pressure plasma treatment of polymers to enhance adhesion; corona treatment of polymer surfaces to enhance adhesion; flame surface treatment of polymers to enhance adhesion; vacuum UV photo-oxidation of polymer surfaces to enhance adhesion; optimization of adhesion of polymers using photochemical surface modification UV/Ozone surface treatment of polymers to enhance adhesion; adhesion enhancement of polymer surfaces by ion beam treatment; polymer surface modification by charged particles; laser surface modification of polymeric materials; competition in adhesion between polysort and monosort functionalized polyolefinic surfaces; amine-terminated dendritic materials for polymer surface modification; arginine-glycine-aspartic acid (RGD) modification of polymer surfaces; and adhesion promoters for polymer surfaces. Audience The book will be of great interest to polymer scientists, surface scientists, adhesionists, materials scientists, plastics engineers, and to those involved in adhesive bonding, packaging, printing, painting, metallization, biological adhesion, biomedical devices, and polymer composites.