Download or read book Surface Modification of Water Purification Membranes to Improve Fouling Resistance in Oily Water Filtration written by Sirirat Kasemset and published by . This book was released on 2015 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the biggest challenges in using water purification membranes is fouling. Surface modification using hydrophilic materials can reduce hydrophobic interactions between membrane surface and hydrophobic foulants, thereby alleviating fouling. In this Ph.D. research, polydopamine (PDA), a highly hydrophilic and universal coating agent, was used to surface-modified reverse osmosis (RO) and ultrafiltration (UF) membranes. PDA modification conditions (e.g., dopamine coating solution concentration, coating time, and pH of coating solution) control PDA deposition and can directly influence the modified membrane properties. Thus, the influence of PDA modification conditions on membrane physical, permeation, selective, and fouling properties were investigated systematically. A fundamental understanding relating the physical and permeation properties and the fouling characteristics of PDA-modified membranes was established. The RO membranes were modified with PDA at various modification conditions. Permeate fluxes during pure water and oil/water emulsion filtrations were studied. The PDA modification increased the permeate fluxes during oil/water emulsion filtration (thus, improved membrane fouling resistance) relative to unmodified membranes regardless of the initial dopamine concentration or deposition time used. However, these changes were only observed for the membranes coated under alkaline conditions, suggesting that the PDA did not deposit well under acidic condition. For UF membranes, molecular weight cutoff (MWCO) and pure water permeance decreased with increasing initial dopamine concentration or deposition time. A permeability and selectivity tradeoff was also observed. Membrane mean pore size and pore size distribution (modeled using log-normal pore size distribution) were investigated via modelling using a hindered solute transport model, Hagen-Poiseuille equation, and a stagnant film model. The PDA modification increased UF membrane surface hydrophilicity regardless of the coating conditions used, but it did not clearly change surface roughness or zeta potential (i.e., surface charge). Membrane fouling propensity was characterized using threshold flux. Compared to unmodified membranes, the threshold flux increased at minimal PDA coatings, but decreased at excessive PDA coatings. These threshold flux changes were likely governed by a tradeoff between surface hydrophilicity increase and pure water permeance decrease. Excessive PDA coatings resulted in decreased pure water permeance and possibly, pore blockage and pore size reduction, leading to higher local permeate flux causing severe fouling and decreased threshold flux.
Download or read book Membranes for Water Treatment written by Klaus-Viktor Peinemann and published by John Wiley & Sons. This book was released on 2010-11-29 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This ready reference on Membrane Technologies for Water Treatment, is an invaluable source detailing sustainable, emerging processes, to provide clean, energy saving and cost effective alternatives to conventional processes. The editors are internationally renowned leaders in the field, who have put together a first-class team of authors from academia and industry to present a highly approach to the subject. The book is an instrumental tool for Process Engineers, Chemical Engineers, Process Control Technicians, Water Chemists, Environmental Chemists, Materials Scientists and Patent Lawyers.
Download or read book Membrane Engineering written by Enrico Drioli and published by Walter de Gruyter GmbH & Co KG. This book was released on 2018-12-17 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern membrane science and technology aids engineers in developing and designing more efficient and environmentally-friendly processes. The optimal material and membrane selection as well as applications in the many involved industries are provided. This work is the ideal introduction for engineers working in membrane science and applications (wastewater, desalination, adsorption, and catalysis), process engineers in separation science, biologists and biochemists, environmental scientists, and most of all students. Its multidisciplinary approach also stimulates thinking of hybrid technologies for current and future life-saving applications (artificial organs, drug delivery).
Download or read book Nanoscience written by Victor M. Starov and published by CRC Press. This book was released on 2011-06-03 with total page 1610 pages. Available in PDF, EPUB and Kindle. Book excerpt: The common perception is that nanoscience is something entirely new, that it sprung forth whole and fully formed like some mythological deity. But the truth is that like all things scientific, nanoscience is the natural result of the long evolution of scientific inquiry. Following a historical trail back to the middle of the 19th century, nanoscience is the inborn property of colloid and interface science. What’s important today is for us to recognize that nanoparticles are small colloidal objects. It should also be appreciated that over the past decades, a number of novel nanostructures have been developed, but whatever we call them, we cannot forget that their properties and behavior are still in the realm of colloid and interface science. However one views it, the interest and funding in nano-science is a tremendous opportunity to advance critical research in colloid chemistry. Nanoscience: Colloidal and Interfacial Aspects brings together a prominent roster of 42 leading investigators and their teams, who detail the wide range of theoretical and experimental knowledge that can be successfully applied for investigating nanosystems, many of which are actually well-known colloidal systems. This international grouping of pioneering investigators from academia and industry use these pages to provide researchers of today and tomorrow with a full examination of nano-disperse colloids, homogeneous and heterogeneous nano-structured materials (and their properties), and shelf-organization at the nano-scale. This cutting-edge reference provides information on investigations into non-linear electrokinetic phenomena in nano-sized dispersions and nano-sized biological systems. It discusses application aspects of technological processes in great detail, providing scientists and engineers across all fields with authoritative commentary on colloid and interface science operating at the nanoscale. Nano-Science: Colloidal and Interfacial Aspects provides an authoritative resource for those wanting to familiarize themselves with current progress as well as for those looking to make their own impact on the development of new technologies and practical applications in fields as diverse as medicine, materials, and environmental science to name but a few. Whether you call the technology nano or colloids, the field continues to be ripe with opportunity.
Download or read book Nanoscale Materials in Water Purification written by Sabu Thomas and published by Elsevier. This book was released on 2018-11-14 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt: Novel nanoscale materials are now an essential part of meeting the current and future needs for clean water, and are at the heart of the development of novel technologies to desalinate water. The unique properties of nanomaterials and their convergence with current treatment technologies present great opportunities to revolutionize water and wastewater treatment. Nanoscale Materials for Water Purification brings together sustainable solutions using novel nanomaterials to alleviate the physical effects of water scarcity. This book covers a wide range of nanomaterials, including noble metal nanoparticles, magnetic nanoparticles, dendrimers, bioactive nanoparticles, polysaccharidebased nanoparticles, nanocatalysts, and redox nanoparticles for water purification. Significant properties and characterization methods of nanomaterials such as surface morphology, mechanical properties, and adsorption capacities are also investigated - Explains how the unique properties of a range of nanomaterials makes them important water purification agents - Shows how the use of nanotechnology can help create cheaper, more reliable, less energy-intensive, more environmentally friendly water purification techniques - Includes case studies to show how nanotechnology has successfully been integrated into water purification system design
Download or read book Comprehensive Membrane Science and Engineering written by Enrico Drioli and published by Elsevier. This book was released on 2017-07-20 with total page 1709 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Membrane Science and Engineering, Second Edition, Four Volume Set is an interdisciplinary and innovative reference work on membrane science and technology. Written by leading researchers and industry professionals from a range of backgrounds, chapters elaborate on recent and future developments in the field of membrane science and explore how the field has advanced since the previous edition published in 2010. Chapters are written by academics and practitioners across a variety of fields, including chemistry, chemical engineering, material science, physics, biology and food science. Each volume covers a wide spectrum of applications and advanced technologies, such as new membrane materials (e.g. thermally rearranged polymers, polymers of intrinsic microporosity and new hydrophobic fluoropolymer) and processes (e.g. reverse electrodialysis, membrane contractors, membrane crystallization, membrane condenser, membrane dryers and membrane emulsifiers) that have only recently proved their full potential for industrial application. This work covers the latest advances in membrane science, linking fundamental research with real-life practical applications using specially selected case studies of medium and large-scale membrane operations to demonstrate successes and failures with a look to future developments in the field. Contains comprehensive, cutting-edge coverage, helping readers understand the latest theory Offers readers a variety of perspectives on how membrane science and engineering research can be best applied in practice across a range of industries Provides the theory behind the limits, advantages, future developments and failure expectations of local membrane operations in emerging countries
Download or read book Osmotically Driven Membrane Processes written by Hongbo Du and published by BoD – Books on Demand. This book was released on 2018-03-28 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Osmotically driven membrane processes (ODMPs) including forward osmosis (FO) and pressure-retarded osmosis (PRO) have attracted increasing attention in fields such as water treatment, desalination, power generation, and life science. In contrast to pressure-driven membrane processes, e.g., reverse osmosis, which typically employs applied high pressure as driving force, ODMPs take advantages of naturally generated osmotic pressure as the sole source of driving force. In light of this, ODMPs possess many advantages over pressure-driven membrane processes. The advantages include low energy consumption, ease of equipment maintenance, low capital investment, high salt rejection, and high water flux. In the past decade, over 300 academic papers on ODMPs have been published in a variety of application fields. The number of such publications is still rapidly growing. The ODMPs' approach, fabrications, recent development and applications in wastewater treatment, power generation, seawater desalination, and gas absorption are presented in this book.
Download or read book Membrane Technology and Engineering for Water Purification written by Rajindar Singh and published by Butterworth-Heinemann. This book was released on 2014-09-25 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Membrane Technology and Engineering for Water Purification, Second Edition is written in a practical style with emphasis on: process description; key unit operations; systems design and costs; plant equipment description; equipment installation; safety and maintenance; process control; plant start-up; and operation and troubleshooting. It is supplemented by case studies and engineering rules-of-thumb. The author is a chemical engineer with extensive experience in the field, and his technical knowledge and practical know-how in the water purification industry are summarized succinctly in this new edition. This book will inform you which membranes to use in water purification and why, where and when to use them. It will help you to troubleshoot and improve performance and provides case studies to assist understanding through real-life examples. - Membrane Technology section updated to include forward osmosis, electrodialysis, and diffusion dialysis - Hybrid Membrane Systems expanded to cover zero liquid discharge, salt recovery and removal of trace contaminants - Includes a new section on plant design, energy, and economics
Download or read book Advances in Membrane Technologies for Water Treatment written by Angelo Basile and published by Elsevier. This book was released on 2015-02-28 with total page 667 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Membrane Technologies for Water Treatment: Materials, Processes and Applications provides a detailed overview of advanced water treatment methods involving membranes, which are increasingly seen as effective replacements for a range of conventional water treatment methods. The text begins with reviews of novel membrane materials and advances in membrane operations, then examines the processes involved with improving membrane performance. Final chapters cover the application of membrane technologies for use in water treatment, with detailed discussions on municipal wastewater and reuse in the textile and paper industries. - Provides a detailed overview of advanced water treatment methods involving membranes - Coverage includes advancements in membrane materials, improvement in membrane performance, and their applications in water treatment - Discusses the use of membrane technologies in the production of drinking water, desalination, wastewater treatment, and recovery
Download or read book Synthetic Polymeric Membranes for Advanced Water Treatment Gas Separation and Energy Sustainability written by Ahmad Fauzi Ismail and published by Elsevier. This book was released on 2020-05-14 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthetic Polymeric Membranes for Advanced Water Treatment, Gas Separation, and Energy Sustainability is a cutting-edge guide that focuses on advanced water treatment applications, covering oily wastewater treatment, desalination, removal of dyes and pigments, photodegradation of organic hazardous materials, heavy metal removal, removal and recovery of nutrients, and volatile organic compounds. Other sections examine the area of gas separation, including acidic gas removal, oxygen enrichment, gas and vapor separation, hydrogen separation, and gas sensing. Final sections cover applications for sustainable energy usage, including the use of synthetic polymer membranes in proton exchange membrane fuel cells (PEMFCs), and more. This is a highly valuable guide for researchers, scientists, and advanced students, working with polymer membranes and films, and across polymer science, polymer chemistry, materials science, chemical e - Explains the design, preparation and characterization of synthetic polymer-based membranes for advanced applications - Provides a clear picture of the state-of-the-art in the field, including novel fabrication approaches and the latest advances in physico-chemical characterizations - Supports the development and implementation of innovative, sustainable solutions to water treatment, gas separation and energy devices
Download or read book Membrane Fabrication written by Nidal Hilal and published by CRC Press. This book was released on 2015-03-02 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: Membranes play a crucial role in ensuring the optimum use and recovery of materials in manufacturing. In the process industries, they are required for efficient production and minimization of environmental impact. They are also essential for the efficient production of clean water, a significant global issue. Membrane Fabrication brings together ex
Download or read book Advances in Oil Water Separation written by Papita Das and published by Elsevier. This book was released on 2022-02-16 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Oil-Water Separation: A Complete Guide for Physical, Chemical, and Biochemical Processes discusses a broad variety of chemical, physical and biochemical processes, including skimming, membrane separation, adsorption, onsite chemical reactions, burning and usage of suitable microbial strains for onsite degradation of oil. It critically reviews all current developments in oil-water separation processes and technologies, identifies gaps and illuminates the scope for future research and development in the field. This book provides researchers, engineers and environmental professionals working in oil recovery and storage with solutions for disposal of waste oil and separation of oil from water in a sustainable, environmentally-friendly way. As the book provides a complete state-of-art overview on oil-water separation technologies, it will also ease literature searches on oil-water separation technologies. - Provides a comprehensive overview of state-of-the-art developments in oil-water separation methods - Discusses the pros and cons of established processes - Guides the reader towards the selection of the right technique/process for each oil-water separation problem - Presents current developments on adsorbent based oil-water separation
Download or read book Advances in Membrane Technologies written by Amira Abdelrasoul and published by BoD – Books on Demand. This book was released on 2020-03-04 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Membrane technologies are currently the most effective and sustainable methods utilized in diversified water filtration, wastewater treatment, as well as industrial and sustainable energy applications. This book covers essential subsections of membrane separation and bioseparation processes from the perspectives of technical innovation, novelty, and sustainability. The book offers a comprehensive overview of the latest improvements and concerns with respect to membrane fouling remediation techniques, issues of bioincompatibility for biomedical applications, and various subareas of membrane separation processes, which will be an efficient resource for engineers.
Download or read book Applied Water Science Volume 2 written by Inamuddin and published by John Wiley & Sons. This book was released on 2021-08-26 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: APPLIED WATER SCIENCE VOLUME 2 The second volume in a new two-volume set on applied water science, this book provides understanding, occurrence, identification, toxic effects and control of water pollutants in an aquatic environment using green chemistry protocols. The high rate of industrialization around the world has led to an increase in the rate of anthropogenic activities which involve the release of different types of contaminants into the aquatic environment. This generates high environmental risks, which could affect health and socio-economic activities if not treated properly. There is no doubt that the rapid progress in improving water quality and management has been motivated by the latest developments in green chemistry. Over the past decade, sources of water pollutants and the conventional methods used for the treatment of industrial wastewater treatment have flourished. Water quality and its adequate availability have been a matter of concern worldwide particularly in developing countries. According to a World Health Organization (WHO) report, more than 80% of diseases are due to the consumption of contaminated water. Heavy metals are highly toxic and are a potential threat to water, soil, and air. Their consumption in higher concentrations gives hazardous outcomes. Water quality is usually measured in terms of chemical, physical, biological, and radiological standards. The discharge of effluent by industries contains heavy metals, hazardous chemicals, and a high amount of organic and inorganic impurities that can contaminate the water environment, and hence, human health. Therefore, it is our primary responsibility to maintain the water quality in our respective countries. This book provides understanding, occurrence, identification, toxic effects and control of water pollutants in an aquatic environment using green chemistry protocols. It focuses on water remediation properties and processes including industry-scale water remediation technologies. This book covers recent literature on remediation technologies in preventing water contamination and its treatment. Chapters in this book discuss remediation of emerging pollutants using nanomaterials, polymers, advanced oxidation processes, membranes, and microalgae bioremediation, etc. It also includes photochemical, electrochemical, piezoacoustic, and ultrasound techniques. It is a unique reference guide for graduate students, faculties, researchers and industrialists working in the area of water science, environmental science, analytical chemistry, and chemical engineering. This outstanding new volume: Provides an in-depth overview of remediation technologies in water science Is written by leading experts in the field Contains excellent, well-drafted chapters for beginners, graduate students, veteran engineers, and other experts alike Discusses current challenges and future perspectives in the field Audience: This book is an invaluable guide to engineers, students, professors, scientists and R&D industrial specialists working in the fields of environmental science, geoscience, water science, physics and chemistry.
Download or read book Membrane Bioreactors for Wastewater Treatment written by Thomas Stephenson and published by IWA Publishing. This book was released on 2000-05-31 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers the subject of membrane bioreactors (MBR) for wastewater treatment, dealing with municipal as well as industrial wastewaters. The book details the 3 types of MBR available and discusses the science behind the technology, their design features, operation, applications, advantages, limitations, performance, current research activities and cost. As the demand for wastewater treatment, recycling and re-use technologies increases, it is envisaged that the membrane separation bioreactor will corner the market. Contents Membrane Fundamentals Biological Fundamentals Biomass Separation Membrane Bioreactors Membrane Aeration and Extractive Bioreactors Commercial Membrane Bioreactor Systems Membrane Bioreactor Applications Case Studies
Download or read book Science and Technology of Separation Membranes written by Tadashi Uragami and published by John Wiley & Sons. This book was released on 2017-03-14 with total page 1360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers a comprehensive overview of membrane science and technology from a single source Written by a renowned author with more than 40 years’ experience in membrane science and technology, and polymer science Covers all major current applications of membrane technology in two definitive volumes Includes academic analyses, applications and practical problems for each existing membrane technology Includes novel applications such as membrane reactors, hybrid systems and optical resolution as well as membrane fuel cells
Download or read book Inorganic Membranes Synthesis Characterization and Applications written by Reyes Mallada and published by Elsevier. This book was released on 2008-05-01 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approx.480 pagesApprox.480 pages
