Download or read book Nonthermal Plasmas for Materials Processing written by Jörg Florian Friedrich and published by John Wiley & Sons. This book was released on 2022-07-15 with total page 805 pages. Available in PDF, EPUB and Kindle. Book excerpt: NONTHERMAL PLASMAS FOR MATERIALS PROCESSING This unique book covers the physical and chemical aspects of plasma chemistry with polymers and gives new insights into the interaction of physics and chemistry of nonthermal plasmas and their applications in materials science for physicists and chemists. The properties and characteristics of plasmas, elementary (collision) processes in the gas phase, plasma surface interactions, gas discharge plasmas and technical plasma sources, atmospheric plasmas, plasma diagnostics, polymers and plasmas, plasma polymerization, post-plasma processes, plasma, and wet-chemical processing, plasma-induced generation of functional groups, and the chemical reactions on these groups along with a few exemplary applications are discussed in this comprehensive but condensed state-of-the-art book on plasma chemistry and its dependence on plasma physics. While plasma physics, plasma chemistry, and polymer science are often handled separately, the aim of the authors is to harmoniously join the physics and chemistry of low-pressure and atmospheric-pressure plasmas with polymer surface chemistry and polymerization and to compare such chemistry with classic chemistry. Readers will find in these chapters Interaction of plasma physics and chemistry in plasmas and at the surface of polymers; Explanation and interpretation of physical and chemical mechanisms on plasma polymerization and polymer surface modification; Introduction of modern techniques in plasma diagnostics, surface analysis of solids, and special behavior of polymers on exposure to plasmas; Discussion of the conflict of energy-rich plasma species with permanent energy supply and the much lower binding energies in polymers and alternatives to avoid random polymer decomposition Technical applications such as adhesion, cleaning, wettability, textile modification, coatings, films, etc. New perspectives are explained about how to use selective and mild processes to allow post-plasma chemistry on non-degraded polymer surfaces. Audience Physicists, polymer chemists, materials scientists, industrial engineers in biomedicine, coatings, printing, etc.
Download or read book Plasma Surface Modification and Hydrophobic Barrier Coating of Paper written by Halil Turgut Sahin and published by . This book was released on 2001 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Polymer Coatings for Electronics written by James J. Licari and published by William Andrew. This book was released on 1990-12-31 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This completely revised edition remains the only comprehensive treatise on polymer coatings for electronics. Since the original edition, the applications of coatings for the environmental protection of electronic systems have greatly increased, largely driven by the competitive need to reduce costs, weight and volume. The demands for high-speed circuits for the rapid processing of signals and data, high-density circuits for the storage and retrieval of megabits of memory, and the improved reliability required of electronics for guiding and controlling weapons and space vehicles have triggered the development of many new and improved coating polymers and formulations. Both the theoretical aspects of coatings (molecular structure of polymer types and their correlation with electrical and physical properties) and applied aspects (functions, deposition processes, applications, testing) are covered in the book. Over 100 proprietary coating formulations were reviewed, their properties collated, and tables of comparative properties prepared. This book is useful as both a primer and as a handbook for collecting properties data.
Download or read book Drexel Polymer Notes written by and published by . This book was released on 1987 with total page 1104 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coating Materials for Electronic Applications written by James J. Licari and published by William Andrew. This book was released on 2003-06-11 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first book in the Materials and Processes for Electronics Applications series answers questions vital to the successful design and manufacturing of electronic components, modules, and systems such as:- How can one protect electronic assemblies from prolonged high humidity, high temperatures, salt spray or other terrestrial and space environments?- What coating types can be used to protect microelectronics in military, space, automotive, or medical environments?- How can the chemistry of polymers be correlated to desirable physical and electrical properties?- How can a design engineer avoid subsequent potential failures due to corrosion, metal migration, electrical degradation, outgassing?- What are the best processes that manufacturing can use to mask, clean, prepare the surface, dispense the coating, and cure the coating?- What quality assurance and in-process tests can be used to assure reliability?- What government or industry specifications are available?- How can organic coatings be selected to meet OSHA, EPA, and other regulations? Besides a discussion of the traditional roles of coatings for moisture and environmental protection of printed circuit assemblies, this book covers dielectric coatings that provide electrical functions such as the low-dielectric-constant dielectrics used to fabricate multilayer interconnect substrates and high-frequency, high-speed circuits. Materials engineers and chemists will benefit greatly from a chapter on the chemistry and properties of the main types of polymer coatings including: Epoxies, Polyimides, Silicones, Polyurethanes, Parylene, Benzocyclobenzene and many others. For manufacturing personnel, there is an entire chapter of over a dozen processes for masking, cleaning, and surface preparation and a comprehensive review of over 20 processes for the application and curing of coatings including recent extrusion, meniscus, and curtain coating methods used in processing large panels. The pros and cons of each method are given to aid the engineer in selecting the optimum method for his/her application. As a bonus, from his own experience, the author discusses some caveats that will help reduce costs and avoid failures. Finally, the author discusses regulations of OSHA, EPA, and other government agencies which have resulted in formulation changes to meet VOC and toxicity requirements. Tables of numerous military, commercial, industry, and NASA specifications are given to help the engineer select the proper callout.
Download or read book Plasma Surface Modification of Polyethylene Tubing Surface Characterization Protein Adsorption and Ex Vivo Blood Compatibility Studies written by Jui-Che Lin and published by . This book was released on 1994 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effect of Two step Treatment on the Degradation of Synthetic Biodegradable Sutures written by Linda Xiuying Zhang and published by . This book was released on 1993 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Non Thermal Plasma Technology for Polymeric Materials written by Sabu Thomas and published by Elsevier. This book was released on 2018-10-08 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-Thermal Plasma Technology for Polymeric Materials: Applications in Composites, Nanostructured Materials and Biomedical Fields provides both an introduction and practical guide to plasma synthesis, modification and processing of polymers, their composites, nancomposites, blends, IPNs and gels. It examines the current state-of-the-art and new challenges in the field, including the use of plasma treatment to enhance adhesion, characterization techniques, and the environmental aspects of the process. Particular attention is paid to the effects on the final properties of composites and the characterization of fiber/polymer surface interactions. This book helps demystify the process of plasma polymerization, providing a thorough grounding in the fundamentals of plasma technology as they relate to polymers. It is ideal for materials scientists, polymer chemists, and engineers, acting as a guide to further research into new applications of this technology in the real world. - Enables materials scientists and engineers to deploy plasma technology for surface treatment, characterization and analysis of polymeric materials - Reviews the state-of-the-art in plasma technology for polymer synthesis and processing - Presents detailed coverage of the most advanced applications for plasma polymerization, particularly in medicine and biomedical engineering, areas such as implants, biosensors and tissue engineering
Download or read book Plasma Surface Modification and Plasma Polymerization written by Norihiro Inagaki and published by CRC Press. This book was released on 2014-07-22 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: In current materials R&D, high priority is given to surface modification techniques to achieve improved surface properties for specific applications requirements. Plasma treatment and polymerization are important technologies for this purpose. This book provides a basic and thorough presentation of this subject. This is probably the first book
Download or read book Plasma Processing of Semiconductors written by Paul Williams and published by Springer Science & Business Media. This book was released on 1997-05-31 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Processing of Semiconductors contains 28 contributions from 18 experts and covers plasma etching, plasma deposition, plasma-surface interactions, numerical modelling, plasma diagnostics, less conventional processing applications of plasmas, and industrial applications. Audience: Coverage ranges from introductory to state of the art, thus the book is suitable for graduate-level students seeking an introduction to the field as well as established workers wishing to broaden or update their knowledge.
Download or read book Surface Modification to Improve Properties of Materials written by Miran Mozetič and published by MDPI. This book was released on 2019-04-16 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains selected contributions on surface modification to improve the properties of solid materials. The surface properties are tailored either by functionalization, etching, or deposition of a thin coating. Functionalization is achieved by a brief treatment with non-equilibrium gaseous plasma containing suitable radicals that interact chemically with the material surface and thus enable the formation of rather stable functional groups. Etching is performed in order to modify the surface morphology. The etching parameters are selected in such a way that a rich morphology of the surfaces is achieved spontaneously on the sub-micrometer scale, without using masks. The combination of adequate surface morphology and functionalization of materials leads to superior surface properties which are particularly beneficial for the desired response upon incubation with biological matter. Alternatively, the materials are coated with a suitable thin film that is useful in various applications from food to aerospace industries.
Download or read book Plasma Deposition and Treatment of Polymers Volume 544 written by Wei William Lee and published by . This book was released on 1999-09 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is immense interest, both industrial and academic, in developing processes for plasma deposition and modification of polymers. These polymers and treatments have wide-ranging applications in electronics, protective coatings, optical coatings, biomaterials, ophthalmics, corrosion protection, tribology, surface mechanics, membranes, food and pharmaceutical packaging, and sensors. In addition, fundamentals of plasma processes and technology are also of critical importance in many semiconductor processing operations such as etching and treatment of polymers, deposition of low-dielectric constant materials, and dry photoresist. The understanding of plasma polymer deposition in various technical fields, as well as in the treatment methods of polymers, have become critical. This book focuses on the deposition, modification and characterization of polymeric materials which are important for advanced technologies. Particular emphasis is placed on materials and synthesis concepts. Topics include: plasma processes for biomaterials; fundamentals of plasma processing; plasma processing for electronics and optics; and plasma treatments and functional coatings.
Download or read book Meeting Abstracts written by Electrochemical Society. Meeting and published by . This book was released on 1996 with total page 1700 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Atomic Layer Deposition for Semiconductors written by Cheol Seong Hwang and published by Springer Science & Business Media. This book was released on 2013-10-18 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering thorough coverage of atomic layer deposition (ALD), this book moves from basic chemistry of ALD and modeling of processes to examine ALD in memory, logic devices and machines. Reviews history, operating principles and ALD processes for each device.
Download or read book Handbook of Manufacturing Engineering and Technology written by Andrew Y. C. Nee and published by Springer. This book was released on 2014-10-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Springer Reference Work Handbook of Manufacturing Engineering and Technology provides overviews and in-depth and authoritative analyses on the basic and cutting-edge manufacturing technologies and sciences across a broad spectrum of areas. These topics are commonly encountered in industries as well as in academia. Manufacturing engineering curricula across universities are now essential topics covered in major universities worldwide.
Download or read book Handbook of Deposition Technologies for Films and Coatings written by Peter M. Martin and published by William Andrew. This book was released on 2009-12-01 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 3e, edited by Peter M. Martin, PNNL 2005 Inventor of the Year, is an extensive update of the many improvements in deposition technologies, mechanisms, and applications. This long-awaited revision includes updated and new chapters on atomic layer deposition, cathodic arc deposition, sculpted thin films, polymer thin films and emerging technologies. Extensive material was added throughout the book, especially in the areas concerned with plasma-assisted vapor deposition processes and metallurgical coating applications.
Download or read book Silane Coupling Agents written by Edwin P. Plueddemann and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: * It has been rumored that a bumble bee has such aerodynamic deficiencies that it should be incapable of flight. Fiberglass-reinforced polymer com posites, similarly, have two (apparently) insurmountable obstacles to per formance: 1) Water can hydrolyze any conceivable bond between organic and inorganic phase, and 2) Stresses across the interface during temperature cycling (resulting from a mismatch in thermal expansion coefficients) may exceed the strength of one of the phases. Organofunctional silanes are hybrid organic-inorganic compounds that are used as coupling agents across the organic-inorganic interface to help overcome these two obstacles to composite performance. One of their functions is to use the hydrolytic action of water under equilibrium condi tions to relieve thermally induced stresses across the interface. If equilib rium conditions can be maintained, the two problems act to cancel each other out. Coupling agents are defined primarily as materials that improve the practical adhesive bond of polymer to mineral. This may involve an increase in true adhesion, but it may also involve improved wetting, rheology, and other handling properties. The coupling agent may also modify the inter phase region to strengthen the organic and inorganic boundary layers.
