Download or read book Surface Modification and Alloying written by J.M. Poate and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an outcome of the NATO institute on surface modification which was held in Trevi, 1981. Surface modification and alloying by ion, electron or laser beams is proving to be one of the most burgeoning areas of materials science. The field covers such diverse areas as integrated circuit processing to fabricating wear and corrosion resistant surfaces on mechanical components. The common scientific questions of interest are the microstructures by the different energy deposition techniques. and associated physical properties produced The chapters constitute a critical review of the various subjects covered at Trevi. Each chapter author took responsibility for the overall review and used contributions from the many papers presented at the meeting; each participant gave a presentation. The contributors are listed at the start of each chapter. We took this approach to get some order in a large and diverse field. We are indebted to all the contributors, in particular the chapter authors for working the many papers into coherent packages; to Jim Mayer for hosting a workshop of chapter authors at Cornell and to Ian Bubb who did a sterling job in working over some of the manuscripts. Our special thanks are due to the text processing center at Bell Labs who took on the task of assembling the book. In particular Karen Lieb and Beverly Heravi typed the whole manuscript and had the entire book phototypeset using the Bell Laboratories UNIXTM system.
Download or read book Surface modification and alloying by laser ion and electron beams written by J. M. Poate and published by Plenum Pub Corp. This book was released on 1983 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electron Ion Plasma Modification of a Hypoeutectoid Al Si Alloy written by Dmitrii Zaguliaev and published by CRC Press. This book was released on 2020-09-27 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electron-Ion-Plasma Modification of a Hypereutectic Al-Si Alloy details theoretical and experimental research and computer simulation of structural phase transformations in AlSi10Mn2Ni Silumin on different scale levels under electroexplosion alloying, electron beam processing and electron-plasma alloying at the nanolevel in order to create new materials. The authors summarize and analyze more than 10 years of research on the electron-ion-plasma effect on strength properties and structure-phase states’ transformations of hypoeutectic Silumin. Key Features: Details physical and mathematical models of mechanisms of surface layer hardening under conditions of varying energy effects Offers insights into improved strength characteristics of Silumin Explores optimal processing modes for increased strength and improved tribological characteristics This book is a valuable resource to researchers and engineers involved with the modification of light alloy surfaces for the automotive and aeronautical industry.
Download or read book Surface Processing of Light Alloys Subject to Concentrated Energy Flows written by Xizhang Chen and published by Springer Nature. This book was released on 2021-01-22 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents studies on the surface modification of aluminum and titanium alloys by electric explosive alloying and electron-beam processing. It also describes and analyzes the physical mechanism of energy actions of these technologies on physical and mechanical properties and discusses their potential use in industry to improve the characteristics of finished products. The book is intended for specialists in the field of condensed matter physics, metallurgy and heat treatment and materials science, as well as graduate and senior students in relevant fields.
Download or read book Multiscale Biomechanics and Tribology of Inorganic and Organic Systems written by Georg-Peter Ostermeyer and published by Springer Nature. This book was released on 2020-11-23 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book gathers authoritative contributions concerning multiscale problems in biomechanics, geomechanics, materials science and tribology. It is written in memory of Sergey Grigorievich Psakhie to feature various aspects of his multifaceted research interests, ranging from theoretical physics, computer modeling of materials and material characterization at the atomic scale, to applications in space industry, medicine and geotectonics, and including organizational, psychological and philosophical aspects of scientific research and teaching as well. This book covers new advances relating to orthopedic implants, concerning the physiological, tribological and materials aspects of their behavior; medical and geological applications of permeable fluid-saturated materials; earthquake dynamics together with aspects relating to their managed and gentle release; lubrication, wear and material transfer in natural and artificial joints; material research in manufacturing processes; hard-soft matter interaction, including adhesive and capillary effects; using nanostructures for influencing living cells and for cancer treatment; manufacturing of surfaces with desired properties; self-organization of hierarchical structures during plastic deformation and thermal treatment; mechanics of composites and coatings; and many more. Covering established knowledge as well as new models and methods, this book provides readers with a comprehensive overview of the field, yet also with extensive details on each single topic.
Download or read book Laser Surface Treatment of Metals written by C.W. Draper and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO Advanced Study Institute, San Miniato, Italy, September 2-13, 1985
Download or read book Surface Engineering written by Dheerendra Kumar Dwivedi and published by Springer. This book was released on 2018-04-04 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to help engineers analyze service condition and potential mechanisms of surface degradation. This will enable engineers select suitable materials for improved service-life and performance of engineering components. The book comprises 7 chapters, and is well illustrated with schematics, photographs, microstructure, XRD patterns, EDAX mapping, and technical data tables. The book focuses on the influence of materials and methods of surface engineering on structure, properties, and wear-performance of engineering components. It begins with the need to study the subject of surface engineering, scope of surface engineering, and classification of techniques of surface engineering. The book covers conventional material system (steel, cast iron, stellite, WC-Co, PCDs, etc.) and new materials like multilayer structures, functionally gradient materials (FGMs), intermetallic barrier coatings, and thermal barrier coating. The book covers most conventional as well as advanced surface engineering techniques, such as burnishing, shot peening, flame and induction hardening, laser and electron beam hardening, plasma and TIG melting, carburizing, nitriding, cyaniding, boronizing, vanadizing, ion implantation, laser alloying, chemical vapor deposition, PE chemical vapor deposition, physical vapor deposition, weld overlays, laser cladding, hot dip galvanizing, hot dip lead tin coating, hot dip aluminizing, hot dip chromizing, electroplating, electroless plating (Ni-P and Ni-B), mechanical plating, roll bonding, explosive bonding, and hot isostatic. The book also includes an introductory chapter on friction-stir processing of aluminum and titanium alloys. Further, it discusses studies on structure, mechanical and wear properties of weld surfacing, flame spray coating, HVOF sprayed coating, laser cladding of ferrous metals, nickel and cobalt based alloys and their composites in as-sprayed and heat-treated conditions. The book provides a comprehensive overview of various destructive and nondestructive techniques used for characterization of engineered surfaces. The materials in the book will be useful to undergraduate and graduate students. In addition, the contents of this book can also be used for professional development courses for practicing engineers.
Download or read book A Review Chill Block Melt Spin Technique Theories Applications written by Mustafa Kamal and published by Bentham Science Publishers. This book was released on 2013-03-15 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid Solidification Processing of molten metals and alloys has proved to be a reliable route for producing new and advanced materials. The Chill-Block Melt Spin (CBMS) technique is important because its simplicity, flexibility and perfection. High quality materials can be produced with lower costs, as compared to other routes, by refining the microstructure and trapping the nucleated (new) metastable phases. Melt-spun ribbons subsequently produced can then be consolidated to produce billets and sheets that can be used in many industries especially high-tech industries such as aerospace and racing automobiles. This book contains several perspectives about CBMS technology and should be a useful review for undergraduate and post-graduate metallurgy students.
Download or read book Ion Solid Interactions written by Michael Nastasi and published by Cambridge University Press. This book was released on 1996-03-29 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive guide to an important materials science technique for students and researchers.
Download or read book Surface Alloying by Ion Electron and Laser Beams written by L. E. Rehn and published by ASM International(OH). This book was released on 1987 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials and Processes for Surface and Interface Engineering written by Y. Pauleau and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials and Processes for Surface and Interface Engineering, which has been written by experts in the fields of deposition technology and surface modification techniques, offers up to date tutorial papers on the latest advances in surface and interface engineering. The emphasis is on fundamental aspects, principles and applications of plasma and ion beam processing technology. A handbook for the engineer and scientist as well as an introduction for students in several branches of materials science and surface engineering.
Download or read book Micro Electro fabrication written by Tanveer Saleh and published by Elsevier. This book was released on 2021-05-14 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro Electro-fabrication outlines three major nanoscale electro-fabrication techniques, including electro-discharge machining, electrochemical machining and electrochemical deposition. Applications covered include the fabrication of nozzles for automobiles, miniature hole machining for aerospace turbine blade cooling, biomedical device fabrication, such as stents, the fabrication of microchannels for microfluidic application, the production of various MEMS devices, rapid prototyping of micro components, and nanoelectrode fabrication for scanning electron microscopy. This comprehensive book discusses the fundamental nature of the various electro-fabrication processes as well as mathematical modelling and applications. It is an important reference for materials scientists and engineers working at the nanoscale. Provides state-of-the-art research investigations on various topics of micro/nano EDM, micro LECD, micro/nano ECM and ECDM techniques Compares a variety of electro-fabrication techniques, outlining which is best in different situations Outlines a variety of modeling and optimization techniques relating to micro/nano EDM, micro LECD, micro/nano ECM and ECDM
Download or read book Hysteresis of Composites written by Li Longbiao and published by BoD – Books on Demand. This book was released on 2019-12-11 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the hysteresis and damping of, and damage to, composites. It analyzes the following areas: damage mechanisms affecting the hysteresis of composites, mechanical hysteresis of ceramic-matrix composites, hysteresis behavior of fiber-reinforced ceramic-matrix composites (CMCs), relationship between the internal damage and hysteresis loops of CMCs, and mechanical hysteresis loops and the fiber/matrix interface frictional coefficient of SiC/CAS and C/SiC composites. A damping study on aluminum-multiwalled carbon nanotube-based nanocomposite materials is discussed to increase the damping property for applications like engine heads, pistons, cylinder blocks, and other aerospace components. The effect of ceramic/graphite addition to the dry sliding wear behavior of copper-based hybrid composites has been assessed at three different normal loads of 9.81, 19.62, and 29.34 N. The authors hope this book will help material scientists and engineering designers to understand and master the hysteresis of composites.
Download or read book Laser Induced Damage in Optical Materials written by and published by . This book was released on 1983 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Induced Damage in Optical Materials 1981 written by and published by . This book was released on 1983 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Induced Damage In Optical Materials 1981 written by Harold E. Bennett and published by ASTM International. This book was released on 1983 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Modification of Metals by Ion Beams 6 written by L. Guzman and published by . This book was released on 1989 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt:
