Download or read book Surfaces and Interfaces for Renewable Energy written by Francisco Manzano-Agugliaro and published by MDPI. This book was released on 2020-02-05 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental problems derived from the massive use of conventional energy resources are one of the main issues that our society has been facing in recent decades. Renewable energies (and particularly solar energy) have become a highly competitive means to meet the world’s increasing energy demands in a sustainable and clean manner. One of the key research challenges for the commercial deployment of several solar energy technologies is focused on the development of feasible and durable coatings that withstand appropriate optical and thermal performance over the lifetime of the solar facilities. This book addresses a number of relevant aspects related to coatings for renewable energies, including a deep survey of coatings used in photovoltaic solar energy, the development of a superhydrophobic and thermal stable silica coating that is potentially suitable for various industrial applications related to renewable technologies, the development of coatings to improve the resistance of structural materials used in concentrating solar thermal technologies with molten salts, and several research works related to solar reflectors for concentrating solar thermal technologies (such us the advanced analysis of the corrosion, the suitability of anti-soiling coatings, and the development of top protective coatings for high-temperature secondary concentrators).
Download or read book Polymer Surfaces and Interfaces Characterization Modification and Application written by Kash L. Mittal and published by CRC Press. This book was released on 2023-01-06 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymeric materials are used for a legion of applications in a wide array of technological areas, and their proper surface/interface characteristics are of cardinal importance for their applications. Therefore, the need to characterize polymer surfaces/interfaces and their suitable modification to impart desired characteristics is quite patent. This book chronicles the proceedings of the Symposium on Polymer Surfaces and Interfaces: Characterization, Modification and Application held as a part of the Society of Plastics Engineers Annual Technical Conference, Boston, May 7--11, 1995. The articles in this book address many aspects of polymer surfaces and interfaces. Topics covered include: various ways (chemical, photochemical, laser, flame, corona) to modify polymer surfaces; modification of contact lens surfaces; various ways to analyze/characterize polymer surfaces; metal/polymer interfaces; metal/polyimide adhesion; metal/self-assembled organic monolayer interfaces; polymer alignment layers for liquid crystals; alignment of liquid crystal surfaces; polyimide alignment layers; molecular re-orientation of polymer surfaces; plasma polymerized organic coatings; epoxy/fiber interphase; epoxy underfill materials for packaging integrated circuits; transport in polymers; polymer miscibility; and cell adhesion.
Download or read book Metal Oxide Nanoparticles 2 Volume Set written by Oliver Diwald and published by John Wiley & Sons. This book was released on 2021-09-14 with total page 903 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanoparticles A complete nanoparticle resource for chemists and industry professionals Metal oxide nanoparticles are integral to a wide range of natural and technological processes—from mineral transformation to electronics. Additionally, the fields of engineering, electronics, energy technology, and electronics all utilize metal oxide nanoparticle powders. Metal Oxide Nanoparticles: Formation, Functional Properties, and Interfaces presents readers with the most relevant synthesis and formulation approaches for using metal oxide nanoparticles as functional materials. It covers common processing routes and the assessment of physical and chemical particle properties through comprehensive and complementary characterization methods. This book will serve as an introduction to nanoparticle formulation, their interface chemistry and functional properties at the nanoscale. It will also act as an in-depth resource, sharing detailed information on advanced approaches to the physical, chemical, surface, and interface characterization of metal oxide nanoparticle powders and dispersions. Addresses the application of metal oxide nanoparticles and its economic impact Examines particle synthesis, including the principles of selected bottom-up strategies Explores nanoparticle formulation—a selection of processing and application routes Discusses the significance of particle surfaces and interfaces on structure formation, stability and functional materials properties Covers metal oxide nanoparticle characterization at different length scales With this valuable resource, academic researchers, industrial chemists, and PhD students can all gain insight into the synthesis, properties, and applications of metal oxide nanoparticles.
Download or read book Physics of Surfaces and Interfaces written by Harald Ibach and published by Springer Science & Business Media. This book was released on 2006-11-18 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: This graduate-level textbook covers the major developments in surface sciences of recent decades, from experimental tricks and basic techniques to the latest experimental methods and theoretical understanding. It is unique in its attempt to treat the physics of surfaces, thin films and interfaces, surface chemistry, thermodynamics, statistical physics and the physics of the solid/electrolyte interface in an integral manner, rather than in separate compartments. It is designed as a handbook for the researcher as well as a study-text for graduate students. Written explanations are supported by 350 graphs and illustrations.
Download or read book Current Trends of Surface Science and Catalysis written by Jeong Young Park and published by Springer Science & Business Media. This book was released on 2013-10-23 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book covers the latest surface science studies on model catalysts, including single crystals, non-colloidal nanocatalysts, and nanoparticles in various forms with the control of size, shape and composition. This book addresses the issue of bridging “materials and pressure gaps” and also discusses the important issue of metal-oxide interface and hot electron flows in heterogeneous catalysis. The current development of in-situ surface techniques that is relevant to bridging “pressure gaps” is also highlighted.
Download or read book Dynamical Phenomena at Surfaces Interfaces and Superlattices written by Manuel Cardona and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific Information Bulletin written by and published by . This book was released on 1992 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallized Plastics 2 written by K.L. Mittal and published by Springer Science & Business Media. This book was released on 1992-03-31 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume documents the proceedings of the Second Symposium on Metallized Plastics: Fundamental and Applied Aspects held under the aegis of the Dielectric Science and Technology Division of the Electrochemical Society in Montreal, Canada, May 7-10, 1990. The first symposium on this topic was held in Chicago, October 10-12, 1988 and the proceedings of l which have been chronicled in a hard-bound volume l As pointed out in the Preface to the proceedings of the first symposium the metallized plastics find scores of applications ranging from very mundane to very sophisticated. Even a cursory look at the literature will convince that this field has sprouted; and there is every reason to believe that with all the research and development activities taking place, new and exciting applications of metallized plastics will emerge. The program for the second symposium was very comprehensive as it included 46 papers covering many aspects of metallized plastics. This symposium was a testimonial to the brisk research activity and keen interest in the topic of metallized plastics. The success of this symposium reinforced our earlier belief that there was a definite need to hold symposia on this topic on a regular basis. Concomitantly, the third symposium in this vein was held in Phoenix, Arizona, October 13-18, 1991 and the fourth is planned for May 16-21, 1993 in Honolulu, Hawaii. As regards the present volume, it contains a total of 35 papers covering a variety of topics ranging from very fundamental to very applied.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1993 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solar Energy Update written by and published by . This book was released on 1979 with total page 1072 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Nanomaterials and Their Applications in Renewable Energy written by Jingbo Louise Liu and published by Elsevier. This book was released on 2015-08-06 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Nanomaterials and Their Applications in Renewable Energy presents timely topics related to nanomaterials' feasible synthesis and characterization, and their application in the energy fields. In addition, the book provides insights and scientific discoveries in toxicity study, with information that is easily understood by a wide audience. Advanced energy materials are important in designing materials that have greater physical, electronic, and optical properties. This book emphasizes the fundamental physics and chemistry underlying the techniques used to develop solar and fuel cells with high charge densities and energy conversion efficiencies. New analytical techniques (synchronous X-ray) which probe the interactions of particles and radiation with matter are also explored, making this book an invaluable reference for practitioners and those interested in the science. - Provides a comprehensive review of solar energy, fuel cells, and gas storage from 2010 to the present - Reviews feasible synthesis and modern analytical techniques used in alternative energy - Explores examples of research in alternative energy, including current assessments of nanomaterials and safety - Contains a glossary of terms, units, and historical benchmarks - Presents a useful guide that will bring readers up to speed on historical developments in alternative fuel cells
Download or read book Electronic Structure of Conjugated Materials and Their Effect on Organic Photovoltaics written by Chuanfei Wang and published by Linköping University Electronic Press. This book was released on 2017-11-15 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: The great tunability of structure and electronic properties of ?-conjugated organic molecules/polymers combined with other advantages such as light weight and flexibility etc., have made organic-based electronics the focus of an exciting still-growing field of physics and chemistry for more than half a century. The application of organic electronics has led to the appearance of wide range of organic electronic devices mainly including organic light emitting diodes (OLED), organic field effect transistors (OFET) and organic solar cells (OSC). The application of the organic electronic devices mainly is limited by two dominant parameters, i.e., their performance and stability. Up to date, OLED has been successfully commercialized in the market while the OSC are still on the way to commercialization hindered by low efficiency and inferior stability. Understanding the energy levels of organic materials and energy level alignment of the devices is crucial to control the efficiency and stability of the OSC. In this thesis, energy levels measured by different methods are studied to explore their relationship with device properties, and the strategies on how to design efficient and stable OSC based on energy level diagrams are provided. Cyclic Voltammetry (CV) is a traditional and widely used method to probe the energy levels of organic materials, although there is little consensus on how to relate the oxidation/reduction potential ((Eox/Ered) to the vacuum level. Ultraviolet Photoelectron Spectroscopy (UPS) can be used to directly detect vertical ionization potential (IP) of organic materials. In this thesis, a linear relationship of IP and Eox was found, with a slope equal to unity. The relationship provides for easy conversion of values obtained by the two techniques, enabling complementarily use in designing and fabricating efficient and stable OSC. A popular rule of thumb is that the offset between the LUMO levels of donor and acceptor should be 0.3 eV, according to which a binary solar cell with the minimum voltage losses around 0.49 V was designed here. Introduction of the ternary blend as active layer is an efficient way to improve both efficiency and stability of the OSC. Based on our studied energy-level diagram within the integer charge transfer (ICT) model, we designed ternary solar cells with enhanced open circuit voltage for the first time and improved thermal stability compared to reference binary ones. The ternary solar cell with minimum voltage losses was developed by combining two donor materials with same ionization potential and positive ICT energy while featuring complementary optical absorption. Furthermore, the fullerene acceptor was chosen so that the energy of the positive ICT state of the two donor polymers is equal to the energy of negative ICT state of the fullerene, which can enhance dissociation of all polymer donor and fullerene acceptor excitons and suppress bimolecular and trap-assistant recombination. Rapid development of non-fullerene acceptors in the last two years affords more recipes of designing both efficient and stabile OSC. We show in this thesis how non-fullerene acceptors successfully can be used to design ternary solar cells with both enhanced efficiency and thermal stability. Besides improving the efficiency of the devices, understanding of the stability and degradation mechanism is another key issue. The degradation of conjugated molecules/polymers often follow many complicated pathways and at the same time many factors for degradation are coupled with each other. Therefore, the degradation of non-fullerene acceptors was investigated in darkness by photoelectron spectroscopy in this thesis with the in-situ method of controlling exposure of O2 and water vapor separately.
Download or read book Adsorption at Natural Minerals Water Interfaces written by Shaoxian Song and published by Springer Nature. This book was released on 2020-10-10 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the latest research regarding the adsorption of heavy metals, toxic ions, and organic compounds at the interfaces of water/minerals, such as mineralogical characterizations, surface chemistry, and modification of natural minerals as adsorbents, as well as the adsorption of cations, anions, and organic compounds in water. Presenting findings by the authors and their co-workers, the book helps readers grasp the principals and benefits of using minerals for water treatment, as well as the advanced technologies in the area developed over last 30 years, especially the last 10 years.
Download or read book Encyclopedia of Interfacial Chemistry written by and published by Elsevier. This book was released on 2018-03-29 with total page 5276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encyclopedia of Interfacial Chemistry: Surface Science and Electrochemistry, Seven Volume Set summarizes current, fundamental knowledge of interfacial chemistry, bringing readers the latest developments in the field. As the chemical and physical properties and processes at solid and liquid interfaces are the scientific basis of so many technologies which enhance our lives and create new opportunities, its important to highlight how these technologies enable the design and optimization of functional materials for heterogeneous and electro-catalysts in food production, pollution control, energy conversion and storage, medical applications requiring biocompatibility, drug delivery, and more. This book provides an interdisciplinary view that lies at the intersection of these fields. Presents fundamental knowledge of interfacial chemistry, surface science and electrochemistry and provides cutting-edge research from academics and practitioners across various fields and global regions
Download or read book Handbook of Biochemistry and Molecular Biology written by Roger L. Lundblad and published by CRC Press. This book was released on 2018-06-14 with total page 1001 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by renowned protein scientist and bestselling author Roger L. Lundblad, with the assistance of Fiona M. Macdonald of CRC Press, this fifth edition of the Handbook of Biochemistry and Molecular Biology gathers a wealth of information not easily obtained, including information not found on the web. Presented in an organized, concise, and simple-to-use format, this popular reference allows quick access to the most frequently used data. Covering a wide range of topics, from classical biochemistry to proteomics and genomics, it also details the properties of commonly used biochemicals, laboratory solvents, and reagents. An entirely new section on Chemical Biology and Drug Design gathers data on amino acid antagonists, click chemistry, plus glossaries for computational drug design and medicinal chemistry. Each table is exhaustively referenced, giving the user a quick entry point into the primary literature. New tables for this edition: Chromatographic methods and solvents Protein spectroscopy Partial volumes of amino acids Matrix Metalloproteinases Gene Editing Click Chemistry
Download or read book Fundamentals of Interface and Colloid Science written by J. Lyklema and published by Elsevier. This book was released on 2000-07-10 with total page 807 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Interface and Colloid Science (FICS) is a standard reference work with an educational nature. The emphasis is on the basic facts and phenomena, which are systematically explained. FICS aims to make interface and colloid science accessible to a wide audience. Interface and colloid science is an important and fascinating field, but one that is often overlooked and undervalued. It has applications as diverse as agriculture, mineral dressing, oil recovery, industrial chemistry, medical science and biotechnology.A deductive approach is followed, with systems of growing complexity being treated as the book progresses. Volume I: Fundamentals (1st ed. 1991, 2nd ed. 1993) reviews the physical chemistry required to understand current literature on interfacial and colloid science. The volume starts from first principles and gradually increases the level. Volume II: Solid-Liquid Interfaces (1995) treats the subject systematically for the first time, including adsorption, double layers and electronkinetics. Volume III: Interface Tension covers interfacial tensions, monolayers and wetting. - Accessible to a wide audience without a detailed knowledge of physics and chemistry - Complex mathematical derivations are kept to a minimum - Treats interfacial and colloidal phenomena from first principles (advanced command of physics and chemistry not required) - Takes the reader from elementary to expert level - Acts as a reference and a textbook - Contains extensive and detailed cumulative subject index
