Download or read book Surface Integrity in Machined Aluminum Alloys written by Raga Madhuri Juturu and published by . This book was released on 2010 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Corrosion of Aluminum and Aluminum Alloys written by Joseph R. Davis and published by ASM International. This book was released on 1999-01-01 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Surface Integrity in Machining written by J. Paulo Davim and published by Springer Science & Business Media. This book was released on 2010-01-10 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Surface Integrity in Machining" describes the fundamentals and recent advances in the study of surface integrity in machining processes. "Surface Integrity in Machining" gathers together research from international experts in the field. Topics covered include: the definition of surface integrity and its importance in functional performance; surface topography characterization and evaluation; microstructure modification and the mechanical properties of subsurface layers; residual stresses; surface integrity characterization methods; and surface integrity aspects in machining processes. A useful reference for researchers in tribology and materials, mechanical and materials engineers, and machining professionals, "Surface Integrity in Machining" can be also used as a textbook by advanced undergraduate and postgraduate students.

Download or read book Machining of Metal Matrix Composites written by J. Paulo Davim and published by Springer Science & Business Media. This book was released on 2011-09-18 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machining of Metal Matrix Composites provides the fundamentals and recent advances in the study of machining of metal matrix composites (MMCs). Each chapter is written by an international expert in this important field of research. Machining of Metal Matrix Composites gives the reader information on machining of MMCs with a special emphasis on aluminium matrix composites. Chapter 1 provides the mechanics and modelling of chip formation for traditional machining processes. Chapter 2 is dedicated to surface integrity when machining MMCs. Chapter 3 describes the machinability aspects of MMCs. Chapter 4 contains information on traditional machining processes and Chapter 5 is dedicated to the grinding of MMCs. Chapter 6 describes the dry cutting of MMCs with SiC particulate reinforcement. Finally, Chapter 7 is dedicated to computational methods and optimization in the machining of MMCs. Machining of Metal Matrix Composites can serve as a useful reference for academics, manufacturing and materials researchers, manufacturing and mechanical engineers, and professionals involved with MMC applications. It can also be used to teach modern manufacturing engineering or as a textbook for advanced undergraduate and postgraduate engineering courses in machining, manufacturing or materials.

Download or read book Machining of Light Alloys written by Diego Carou and published by CRC Press. This book was released on 2018-08-06 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminium, magnesium and titanium are alloys of special interest for engineering applications in a wide range of sectors such as aeronautics, automotive and medical. Their low density, along with sufficient mechanical properties, makes them especially adequate for sectors such as transportation allowing diminishing weight less fuel consumption and emissions to the atmosphere. Nowadays, machining is still one the most important manufacturing processes, not only for metal parts, but also for specially designed hybrid parts for more demanding new applications. A wide range of valuable research has been done on the machining of conventional engineering materials. However, when dealing with light alloys and hybrid materials containing them, they need to face new challenges. Particularly, it is important to analyse the suitability of the machining of these alloys in the current context of Industry 4.0, focusing on the development of cost-effective and sustainable processes. This book is a comprehensive source on the machining of light alloys, presenting a collection of both experimental and review studies. The work is arranged in eight chapters, presented by a group of international scholars, which analyse the main problems related to the machining of these alloys from different perspectives. Key Features A comprehensive state-of-the-art reference source on machining of light alloys Provides research on conventional and non-conventional machining process Offers current research topics on sustainable machining Presents research on the machining of hybrid materials using light alloys Includes applications for Industry 4.0 environments Machining of Light Alloys: Aluminum, Titanium, and Magnesium The aim of the book is to serve as a tool for helping researchers and practitioners to face machining challenges and facilitating the development of new industrial applications for light alloys.

Download or read book Surface Integrity of Machined Structural Components written by William P. Koster and published by . This book was released on 1970 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: A program has been run to evaluate the effects of different metal removal methods and variations of these methods on surface integrity. Three alloys were studied: beta rolled Ti-6Al-4V; AISI 4340, quenched and tempered, 50 Rc; and Inconel 718, solution treated and aged. Various grinding procedures caused the titanium alloy to exhibit a fatigue strength range of 13 to 62 ksi. The fatigue strength of 4340 due to grinding variables ranged from 62 to 102 ksi, while Inconel 718 showed a range of 24 to 60 ksi. Abusive grinding conditions always resulted in fatigue strengths at the minimum of these ranges. Milling variables exhibited a fatigue strength range of 32 to 72 ksi in the beta rolled titanium alloy. EDM and ECM on Inconel 718 yielded 22 and 39 ksi, respectively, compared to 60 ksi for gentle grinding. Guidelines for processing aerospace hardware considering surface integrity requirements are presented in the report.

Download or read book Thermal Machining Processes written by Society of Manufacturing Engineers and published by . This book was released on 1979 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Machining of Titanium Alloys written by J. Paulo Davim and published by Springer. This book was released on 2014-07-05 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a collection of examples illustrating the resent research advances in the machining of titanium alloys. These materials have excellent strength and fracture toughness as well as low density and good corrosion resistance; however, machinability is still poor due to their low thermal conductivity and high chemical reactivity with cutting tool materials. This book presents solutions to enhance machinability in titanium-based alloys and serves as a useful reference to professionals and researchers in aerospace, automotive and biomedical fields.

Download or read book Machinability of Advanced Materials written by J. Paulo Davim and published by John Wiley & Sons. This book was released on 2014-02-19 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machinability of Advanced Materials addresses the level of difficulty involved in machining a material, or multiple materials, with the appropriate tooling and cutting parameters. A variety of factors determine a material’s machinability, including tool life rate, cutting forces and power consumption, surface integrity, limiting rate of metal removal, and chip shape. These topics, among others, and multiple examples comprise this research resource for engineering students, academics, and practitioners.

Download or read book Aluminum and Aluminum Alloys written by Joseph R. Davis and published by ASM International. This book was released on 1993-01-01 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: This one-stop reference is a tremendous value and time saver for engineers, designers and researchers. Emerging technologies, including aluminum metal-matrix composites, are combined with all the essential aluminum information from the ASM Handbook series (with updated statistical information).

Download or read book Metal Cutting Theory and Practice written by David A. Stephenson and published by CRC Press. This book was released on 2016-04-06 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Complete Reference Covering the Latest Technology in Metal Cutting Tools, Processes, and Equipment Metal Cutting Theory and Practice, Third Edition shapes the future of material removal in new and lasting ways. Centered on metallic work materials and traditional chip-forming cutting methods, the book provides a physical understanding of conventional and high-speed machining processes applied to metallic work pieces, and serves as a basis for effective process design and troubleshooting. This latest edition of a well-known reference highlights recent developments, covers the latest research results, and reflects current areas of emphasis in industrial practice. Based on the authors’ extensive automotive production experience, it covers several structural changes, and includes an extensive review of computer aided engineering (CAE) methods for process analysis and design. Providing updated material throughout, it offers insight and understanding to engineers looking to design, operate, troubleshoot, and improve high quality, cost effective metal cutting operations. The book contains extensive up-to-date references to both scientific and trade literature, and provides a description of error mapping and compensation strategies for CNC machines based on recently issued international standards, and includes chapters on cutting fluids and gear machining. The authors also offer updated information on tooling grades and practices for machining compacted graphite iron, nickel alloys, and other hard-to-machine materials, as well as a full description of minimum quantity lubrication systems, tooling, and processing practices. In addition, updated topics include machine tool types and structures, cutting tool materials and coatings, cutting mechanics and temperatures, process simulation and analysis, and tool wear from both chemical and mechanical viewpoints. Comprised of 17 chapters, this detailed study: Describes the common machining operations used to produce specific shapes or surface characteristics Contains conventional and advanced cutting tool technologies Explains the properties and characteristics of tools which influence tool design or selection Clarifies the physical mechanisms which lead to tool failure and identifies general strategies for reducing failure rates and increasing tool life Includes common machinability criteria, tests, and indices Breaks down the economics of machining operations Offers an overview of the engineering aspects of MQL machining Summarizes gear machining and finishing methods for common gear types, and more Metal Cutting Theory and Practice, Third Edition emphasizes the physical understanding and analysis for robust process design, troubleshooting, and improvement, and aids manufacturing engineering professionals, and engineering students in manufacturing engineering and machining processes programs.

Download or read book Advanced Machining Processes of Metallic Materials written by Wit Grzesik and published by Elsevier. This book was released on 2016-11-15 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Machining Processes of Metallic Materials: Theory, Modelling and Applications, Second Edition, explores the metal cutting processes with regard to theory and industrial practice. Structured into three parts, the first section provides information on the fundamentals of machining, while the second and third parts include an overview of the effects of the theoretical and experimental considerations in high-level machining technology and a summary of production outputs related to part quality. In particular, topics discussed include: modern tool materials, mechanical, thermal and tribological aspects of machining, computer simulation of various process phenomena, chip control, monitoring of the cutting state, progressive and hybrid machining operations, as well as practical ways for improving machinability and generation and modeling of surface integrity. This new edition addresses the present state and future development of machining technologies, and includes expanded coverage on machining operations, such as turning, milling, drilling, and broaching, as well as a new chapter on sustainable machining processes. In addition, the book provides a comprehensive description of metal cutting theory and experimental and modeling techniques, along with basic machining processes and their effective use in a wide range of manufacturing applications. The research covered here has contributed to a more generalized vision of machining technology, including not only traditional manufacturing tasks, but also potential (emerging) new applications, such as micro and nanotechnology. Includes new case studies illuminate experimental methods and outputs from different sectors of the manufacturing industry Presents metal cutting processes that would be applicable for various technical, engineering, and scientific levels Includes an updated knowledge of standards, cutting tool materials and tools, new machining technologies, relevant machinability records, optimization techniques, and surface integrity

Download or read book Aluminum Alloys written by and published by Mdpi AG. This book was released on 2018-01-10 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminium is the world's most abundant metal and is the third most common element, comprising 8% of the Earth's crust. The versatility of aluminium makes it the most widely used metal after steel. By utilising various combinations of their advantageous properties such as strength, lightness, corrosion resistance, recyclability, and formability, aluminium alloys are being employed in an ever-increasing number of applications. In the recent decade, a rapid new development has been made in production of aluminium alloys, and new techniques of casting, forming, welding, and surface modification, have been evolved to improve the structural integrity of aluminium alloys. This Special Issue covers wide scope of recent progress and new developments regarding all aspects of aluminium alloys, including processing, forming, welding, microstructure and mechanical property, creep, fatigue, corrosion and surface behavior, thermodynamics, modeling, and application of different aluminum alloys.

Download or read book Machinability of Engineering Materials written by B. Mills and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the manufacturing industries, despite the development and improvement of metal forming processes, a great deal of reliance is still placed on metal cutting processes and this will continue into the foreseeable future. Thus, there will continue to be a requirement for the development of improved cutting tool materials, workpiece materials, cutting fluids and testing methods; collectively this activity can be described as improving machinability. Machinability is a parameter which in many ways is vague, sometimes qualitative and very often misunderstood. The purpose of this text is to give a broad understanding of the concept, methods of assessment and ways of improving machinability to the manufacturing engineer, the metallurgist and the materials scientist. The text should also be of interest to those engaged in research in manufacturing engineering and metal cutting. The text, of necessity, does not attempt to give detailed information about the machining characteristics of a wide range of tool and workpiece materials. It is felt that this is beyond the scope of the book and is best left to other sources, such as machinability data banks and the Machining Handbook*, whose main objective is to present this kind of information. It is hoped that the reader will be able to progress logically from the fundamental aspects of the metal cutting process to the sections on the more specific topics of machinability including machinability testing and the properties of tool and workpiece materials which affect their machining performance.

Download or read book Tribology of Metal Cutting written by Viktor P. Astakhov and published by Elsevier. This book was released on 2006-12-18 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology of Metal Cutting deals with the emerging field of studies known as Metal Cutting Tribology. Tribology is defined as the science and technology of interactive surfaces moving relative each other. It concentrates on contact physics and mechanics of moving interfaces that generally involve energy dissipation. This book summarizes the available information on metal cutting tribology with a critical review of work done in the past. The book covers the complete system of metal cutting testing. In particular, it presents, explains and exemplifies a breakthrough concept of the physical resource of the cutting tool. It also describes the cutting system physical efficiency and its practical assessment via analysis of the energy partition in the cutting system. Specialists in the field of metal cutting will find information on how to apply the major principles of metal cutting tribology, or, in other words, how to make the metal cutting tribology to be useful at various levels of applications. The book discusses other novel concepts and principles in the tribology of metal cutting such as the energy partition in the cutting system; versatile metrics of cutting tool wear; optimal cutting temperature and its use in the optimization of the cutting process; the physical concept of cutting tool resource; and embrittlement action. This book is intended for a broad range of readers such as metal cutting tool, cutting insert, and process designers; manufacturing engineers involved in continuous process improvement; research workers who are active or intend to become active in the field; and senior undergraduate and graduate students of manufacturing. · Introduces the cutting system physical efficiency and its practical assessment via analysis of the energy partition in the cutting system.· Presents, explains and exemplifies a breakthrough concept of the physical resource of the cutting tool.· Covers the complete system of metal cutting testing.

Download or read book Handbook of Aluminum written by George E. Totten and published by CRC Press. This book was released on 2003-03-27 with total page 1318 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Aluminum: Vol. 1: Physical Metallurgy and Processes covers all aspects of the physical metallurgy, analytical techniques, and processing of aluminium, including hardening, annealing, aging, property prediction, corrosion, residual stress and distortion, welding, casting, forging, molten metal processing, machining, rolling, and extrusion. It also features an extensive, chapter-length consideration of quenching.

Download or read book Modern Machining Technology written by Bijoy Bhattacharyya and published by Academic Press. This book was released on 2019-09-17 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Machining Technology: Advanced, Hybrid, Micro Machining and Super Finishing Technology explores complex and precise components with challenging shapes that are increasing in demand in industry. As the first book to cover all major technologies in this field, readers will find the latest technical developments and research in one place, allowing for easy comparison of specifications. Technologies covered include mechanical, thermal, chemical, micro and hybrid machining processes, as well as the latest advanced finishing technologies. Each topic is accompanied by a basic overview, examples of typical applications and studies of performance criteria. In addition, readers will find comparative advantages, model questions and solutions. Addresses a broad range of modern machining techniques, providing specifications for easy comparison Includes descriptions of the main applications for each method, along with the materials or products needed Provides the very latest research in processes, including hybrid machining