Download or read book Surface Initiated Polymerizations on Inorganic Oxide Naowires and Aza crown Containing Materials for Solid Polymer Electrolytes written by Benjamin Lee Rupert and published by . This book was released on 2006 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2007 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Holographically Polymerized Poly Ethylene Oxide Network As Solid Polymer Electrolytes written by Kevin T. Bazzel and published by . This book was released on 2016 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current generation has become increasingly concerned with the dangers posed by fossil fuels and have therefore turned their attention to clean energy technologies, such as electrochemical batteries and solar cells as suitable alternatives. Lithium-based batteries have emerged as the most promising energy storage for use in personal devices, transportation and general energy storage. Current lithium batteries are referred to as 'rocking chair' batteries due to the presence of lithium in its ionic rather than metallic state. These batteries are safe for commercial use, however, they severely cut into lithium's high specific capacitance properties. Consumer demands for higher battery energy densities and faster charging rates are driving research for lithium-metal batteries. Potential safety concerns arise with current liquid electrolytes in lithium-metal batteries due problematic lithium dendrite growth in the cell. Liquid electrolytes do little to prevent dendrite growth, which will eventually cause short-circuiting and possible volatile reactions. Solid polymer electrolytes have been proven to prevent dendrite growth by providing a physical barrier between the electrodes. Advancements in polymer electrolyte membranes (PEMs) are necessary to increase the potential for fuel cells, batteries, and solar conversion devices. Increasing the mechanical properties to create a mechanically robust film has a direct tradeoff of reducing ion transport and conductivity. This research is focused on decoupling ionic conductivity and mechanical properties to form a phase separated membrane capable of inhibiting dendrite growth. Holographic polymerization was used as a topdown technique to create a nanostructure with highly conductive rich phases, as well as mechanically robust phases. A new formulation has been proposed that utilizes a photo-inert low molecular poly(ethylene oxide) (PEO) which has the main mechanism for ionic conductivity. A crosslinked network composed of polyhedral oligomeric silsesquioxanes (POSS) and photoreactive PEO monomers provide the mechanical support. The mechanical and conductive properties of the phase-separated films were investigated and compared with isotropic floodlit samples. The films were shown to show exceptional low temperature conductivity and the mechanical and conductive properties were successfully decoupled through the use of holographic polymerization.
Download or read book Nanocomposites written by Philippe Knauth and published by Springer Science & Business Media. This book was released on 2007-10-27 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanocomposites have been receiving more and more attention given the improvement of synthesis techniques and the availability of powerful characterization techniques. The aim of the book is to introduce nanocomposite materials using a broad range of inorganic and organic solids. It also presents recent and not very common developments in especially spectroscopic characterization techniques, including Mössbauer, EXAFS, NMR. This should make the book attractive for a broad range of readers, including chemists and physicists.
Download or read book Chemistry of Polymeric Metal Chelates written by Gulzhian I. Dzhardimalieva and published by Springer. This book was released on 2018-02-13 with total page 1036 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the chemistry of polymeric metal chelates. The main results and the production and chemical structure of polymers with chelate units as well as the specificity of metal complex binding of different structure are presented here. This book also reveals the transformations which components undergo in the course of chelation. Special attention is paid not only to synthetic but also to natural (including living) systems. The usage of polymeric metal chelates and their development are examined. The related research was performed for chelates with chain structure. This book is useful to researchers being active in synthesis and design of macromolecular metal chelates
Download or read book Rechargeable Batteries written by Zhengcheng Zhang and published by Springer. This book was released on 2015-06-24 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book updates the latest advancements in new chemistries, novel materials and system integration of rechargeable batteries, including lithium-ion batteries and batteries beyond lithium-ion and addresses where the research is advancing in the near future in a brief and concise manner. The book is intended for a wide range of readers from undergraduates, postgraduates to senior scientists and engineers. In order to update the latest status of rechargeable batteries and predict near research trend, we plan to invite the world leading researchers who are presently working in the field to write each chapter of the book. The book covers not only lithium-ion batteries but also other batteries beyond lithium-ion, such as lithium-air, lithium-sulfur, sodium-ion, sodium-sulfur, magnesium-ion and liquid flow batteries.
Download or read book Ionic Liquid Crystals written by Giacomo Saielli and published by MDPI. This book was released on 2019-06-24 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book we have collected a series of state-of-the art papers written by specialists in the field of ionic liquid crystals (ILCs) to address key questions concerning the synthesis, properties, and applications of ILCs. New compounds exhibiting ionic liquid crystalline phases are presented, both of calamitic as well as discotic type. Their dynamic and structural properties have been investigated with a series of experimental techniques including differential scanning calorimetry, polarized optical spectroscopy, X-ray scattering, and nuclear magnetic resonance, impedance spectroscopy to mention but a few. Moreover, computer simulations using both fully atomistic and highly coarse-grained force fields have been presented, offering an invaluable microscopic view of the structure and dynamics of these fascinating materials.
Download or read book Design and Synthesis of Conjugated Polymers written by Mario Leclerc and published by John Wiley & Sons. This book was released on 2010-06-24 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first systematic compilation of synthesis methods for different classes of polymers describes well-tested and reproducible procedures, thus saving time, money and chemicals. Each chapter presents the latest method for a specific class of conjugated polymers with a particular emphasis on the design aspects for organo-electronic applications. In this concise and practically oriented manner, readers are introduced to the strategies of influencing and controlling the polymer properties with respect to their use in the desired device. This style of presentation quickly helps researchers in their daily lab work and prevents them from reinventing the wheel over and over again.
Download or read book Direct Alcohol Fuel Cells written by Horacio R. Corti and published by Springer Science & Business Media. This book was released on 2013-12-02 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct Alcohol Fuel Cells: Materials, Performance, Durability and Applications begins with an introductory overview of direct alcohol fuel cells (DAFC); it focuses on the main goals and challenges in the areas of materials development, performance, and commercialization. The preparation and the properties of the anodic catalysts used for the oxidation of methanol, higher alcohols, and alcohol tolerant cathodes are then described. The membranes used as proton conductors in DAFC are examined, as well as alkaline membranes, focusing on the electrical conductivity and alcohol permeability. The use of different kinds of carbon materials as catalyst supports, gas diffusion layers, and current collectors in DAFC is also discussed. State of the art of the modeling is used to estimate performance and durability. The closing chapter reviews the use of DAFC in portable equipment and mobile devices and features a detailed discussion on the mechanisms of component degradation which limits their durability. This book is written to facilitate the understanding of DAFC technology, applications, and future challenges. It is an excellent introduction for electrochemical and material engineers interested in small fuel cells as portable energy sources, scientists focused on materials science for energy production and storage, as well as policy-makers in the area of renewable energies.
Download or read book Desk Encyclopedia of Microbiology written by Moselio Schaechter and published by Academic Press. This book was released on 2010-04-19 with total page 1277 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Desk Encyclopedia of Microbiology, Second Edition is a single-volume comprehensive guide to microbiology for the advanced reader. Derived from the six volume e-only Encyclopedia of Microbiology, Third Edition, it bridges the gap between introductory texts and specialized reviews. Covering topics ranging from the basic science of microbiology to the current "hot" topics in the field, it will be invaluable for obtaining background information on a broad range of microbiological topics, preparing lectures and preparing grant applications and reports. The most comprehensive single-volume source providing an overview of microbiology to non-specialists Bridges the gap between introductory texts and specialized reviews Provides concise and general overviews of important topics within the field making it a helpful resource when preparing for lectures, writing reports, or drafting grant applications
Download or read book Nanotechnology Characterization Tools for Tissue Engineering and Medical Therapy written by Challa S.S.R. Kumar and published by Springer Nature. This book was released on 2019-11-22 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ninth volume of a 40 volume series on nanoscience and nanotechnology, edited by the renowned scientist Challa S.S.R. Kumar. This handbook gives a comprehensive overview about Nanotechnology Characterization Tools for Tissue Engineering and Medical Therapy. Modern applications and state-of-the-art techniques are covered and make this volume an essential reading for research scientists in academia and industry.
Download or read book Carbon written by Tapan Gupta and published by Springer. This book was released on 2018-09-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: All living things contain carbon in some form, as it is the primary component of macromolecules including proteins, lipids, nucleic acids (RNA and DNA), and carbohydrates. As a matter of fact, it is the backbone of all organic (chemistry) compounds forming different kinds of bonds. Carbon: The Black, the Gray and the Transparent is not a complete scientific history of the material, but a book that describes key discoveries about this old faithful element while encouraging broader perspectives and approaches to its research due to its vast applications. All allotropes of carbon are described in this book, along with their properties, uses, and methods of procurement or manufacturing. Black carbon is represented by coal, gray carbon is represented by graphite, and transparent carbon is represented by diamond.
Download or read book NanoBioEngineering written by Bhupinder Singh and published by CRC Press. This book was released on 2018-11-02 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to provide the fundamental comprehension of a broad range of topics in an integrated volume such that readership hailing from diverse disciplines can rapidly acquire the necessary background for applying it in pertinent research and development field.
Download or read book Self Healing Polymer Based Systems written by Sabu Thomas and published by Elsevier. This book was released on 2020-07-11 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: Self-Healing Polymer-Based Systems presents all aspects of self-healing polymeric materials, offering detailed information on fundamentals, preparation methods, technology, and applications, and drawing on the latest state-of-the-art research. The book begins by introducing self-healing polymeric systems, with a thorough explanation of underlying concepts, challenges, mechanisms, kinetic and thermodynamics, and types of chemistry involved. The second part of the book studies the main categories of self-healing polymeric material, examining elastomer-based, thermoplastic-based, and thermoset-based materials in turn. This is followed by a series of chapters that examine the very latest advances, including nanoparticles, coatings, shape memory, self-healing biomaterials, ionomers, supramolecular polymers, photoinduced and thermally induced self-healing, healing efficiency, life cycle analysis, and characterization. Finally, novel applications are presented and explained. This book serves as an essential resource for academic researchers, scientists, and graduate students in the areas of polymer properties, self-healing materials, polymer science, polymer chemistry, and materials science. In industry, this book contains highly valuable information for R&D professionals, designers, and engineers, who are looking to incorporate self-healing properties in their materials, products, or components. Provides comprehensive coverage of self-healing polymeric materials, covering principles, techniques, and applications Includes the very latest developments in the field, such as the role of nanofillers in healing, life cycle analysis of materials, and shape memory assisted healing Enables the reader to unlock the potential of self-healing polymeric materials for a range of advanced applications
Download or read book Composites and Their Properties written by Ning Hu and published by BoD – Books on Demand. This book was released on 2012-08-22 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composites are a class of material, which receives much attention not only because it is on the cutting edge of active material research fields due to appearance of many new types of composites, e.g., nanocomposites and bio-medical composites, but also because there are a great deal of promises for their potential applications in various industries ranging from aerospace to construction due to their various outstanding properties. This book mainly deals with fabrication and property characterization of various composites by focusing on the following topics: functional and structural nanocomposites, numerical and theoretical modelling of various damages in long fiber reinforced composites and textile composites, design, processing and manufacturing technologies and their effects on mechanical properties of composites, characterization of mechanical and physical properties of various composites, and metal and ceramic matrix composites. This book has been divided into five sections to cover the above contents.
Download or read book Biomaterials Science and Technology written by Yaser Dahman and published by CRC Press. This book was released on 2019-02-11 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomaterials Science and Technology: Fundamentals and Developments presents a broad scope of the field of biomaterials science and technology, focusing on theory, advances, and applications. It reviews the fabrication and properties of different classes of biomaterials such as bioinert, bioactive, and bioresorbable, in addition to biocompatibility. It further details traditional and recent techniques and methods that are utilized to characterize major properties of biomaterials. The book also discusses modifications of biomaterials in order to tailor properties and thus accommodate different applications in the biomedical engineering fields and summarizes nanotechnology approaches to biomaterials. This book targets students in advanced undergraduate and graduate levels in majors related to fields of Chemical Engineering, Materials Engineering and Science, Biomedical Engineering, Bioengineering, and Life Sciences. It assists in understanding major concepts of fabrication, modification, and possible applications of different classes of biomaterials. It is also intended for professionals who are interested in recent advances in the emerging field of biomaterials.
Download or read book Electrolytes for Lithium and Lithium Ion Batteries written by T. Richard Jow and published by Springer. This book was released on 2014-05-06 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrolytes for Lithium and Lithium-ion Batteries provides a comprehensive overview of the scientific understanding and technological development of electrolyte materials in the last several years. This book covers key electrolytes such as LiPF6 salt in mixed-carbonate solvents with additives for the state-of-the-art Li-ion batteries as well as new electrolyte materials developed recently that lay the foundation for future advances. This book also reviews the characterization of electrolyte materials for their transport properties, structures, phase relationships, stabilities, and impurities. The book discusses in-depth the electrode-electrolyte interactions and interphasial chemistries that are key for the successful use of the electrolyte in practical devices. The Quantum Mechanical and Molecular Dynamical calculations that has proved to be so powerful in understanding and predicating behavior and properties of materials is also reviewed in this book. Electrolytes for Lithium and Lithium-ion Batteries is ideal for electrochemists, engineers, researchers interested in energy science and technology, material scientists, and physicists working on energy.
