EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Surface Hardening of Steels

Download or read book Surface Hardening of Steels written by Joseph R. Davis and published by ASM International. This book was released on 2002-01-01 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation A practical selection guide to help engineers and technicians choose the mot efficient surface hardening techniques that offer consistent and repeatable results. Emphasis is placed on characteristics such as processing temperature, case/coating thickness, bond strength, and hardness level obtained. The advantages and limitations of the various thermochemical, thermal and coating/surface modification technologies are compared

Book PRACTICAL HEAT TREATING

    Book Details:
  • Author : JON L. DOSSETT
  • Publisher :
  • Release : 2020
  • ISBN : 9781627083249
  • Pages : pages

Download or read book PRACTICAL HEAT TREATING written by JON L. DOSSETT and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Case Hardening of Steel

Download or read book Case Hardening of Steel written by Howard E. Boyer and published by . This book was released on 1987 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Induction Heat Treatment of Steel

Download or read book Induction Heat Treatment of Steel written by S. L. Semiatin and published by . This book was released on 1986 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Stainless Steel 2000

Download or read book Stainless Steel 2000 written by Tom Bell and published by CRC Press. This book was released on 2020-01-31 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Austenitic stainless steels lend themselves to a wide range of applications. However, they normally stiffer from poor wear resistance and do not respond well to traditional surface treatments. This volume. the fruit of a current status seminar, reflects the enormous strides which have been made in the last few years in the study of the expanded austenite phase (also called the S phase) and the development of new surface treatment techniques. As well as the papers presented at the seminar, the book contains selection from related papers and a comprehensive bibliography of the literature on the subject from 1979 to 2000.

Book Carburizing

Download or read book Carburizing written by Geoffrey Parrish and published by ASM International. This book was released on 1999-01-01 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Based on his training in metallurgy and experience in a large British gear manufacturing company, Parrish reviews the microstructural features of metal products that have been carbon case-hardened, and the influence of those features on the more important material properties. He is not concerned with the carbonizing process at all. He primarily addresses students of engineering and ferrous metallurgy, but also stress and design engineers who might want to understand more fully the specifications of the materials they are considering for their designs. He wrote the eight articles to summarize the field's literature of the early 1970s for his own convenience, but at invitation, published them as a series in the Heat Treatment of Metals during 1967-77, and collected them for a first edition of the volume in 1980. Annotation copyrighted by Book News, Inc., Portland, OR.

Book Thermochemical Surface Engineering of Steels  Improving Materials Performance

Download or read book Thermochemical Surface Engineering of Steels Improving Materials Performance written by Eric J. Mittemeijer and published by Woodhead Publishing. This book was released on 2017-11-13 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermochemical surface engineering significantly improves the properties of steels. Edited by two of the world s leading authorities, this important book summarises the range of techniques and their applications. It covers nitriding, nitrocarburizing and carburizing. There are also chapters on low temperature techniques as well as boriding, sheradizing, aluminizing, chromizing, thermo-reactive deposition and diffusion. Reviews the fundamentals of surface treatments and current performance of improved materialsCovers nitriding, nitrocarburizing and carburizing of iron and iron carbon alloysExamines how different thermochemical surface engineering methods can help against corrosion"

Book Flame Hardening

Download or read book Flame Hardening written by Hans Wilhelm Grönegress and published by Springer Science & Business Media. This book was released on 2013-12-11 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book intended for shop use tries to familiarize the reader with the peculiari ties of a hardening method which due to its many advantages is now in use,many shops. A general knowledge of the principles of hardening and heat treating is presumed. Introduction 1. The name of the process. Flame hardening is a method derived from the old quench hardening and is used for the surface hardening of heat treatable steels. Flame hardening is so named in analogy to flame cutting as the use of a flame is a distinctive feature of this process as opposed to the use of a furnace. 2. Characteristics of flame hardening. In flame hardening the area to be 6 hardened is heated with a burner of large heat capacity (approx. 0.5 · 10 kcaljhr/ meter of flame lengths or 50,000 BTUfhr/inch of flame length) supplied with a mixture of fuel gas and oxygen. The hardening temperature is thus reached in so short a time at the surface that a heat jam is created, that is, more heat is supplied to the surface than can be dissipated to the interior of the workpiece. As the querr ehing takes place immediately after the heating the penetration of the heat to greater depth is prevented and only the outer layer subject to wear is hardened. The core of the workpiece remains unaffected by this heat treatment in cantrast to the other hardening methods where the entire piece is through heated in a furnace.

Book Light Microscopy of Carbon Steels

Download or read book Light Microscopy of Carbon Steels written by Leonard Ernest Samuels and published by ASM International. This book was released on with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing over 1,200 representative micrographs and the information and explanatory text that makes them really useful, including composition, condition, etchant, magnification, and more than 100 graphs and tables, this 'how to' book not only gives everyday working examples, but also discusses the relationship between the constitution, metallurgy, and microstructure of various carbon steel products. Contents: Nomenclature of Phases and Constituents; Phase Transformations; Low-Carbon Irons and Steels; Annealing and Normalizing; Spheroidization and Graphitization; Austenitization; Transformation of Austenite; Tempering of Martensite; Welding; Surface Oxidation, Decarburation and Oxidation Scaling; Glossary of Terms; EtchingMethods; ConversionTables; Index.

Book Steel and Its Heat Treatment

Download or read book Steel and Its Heat Treatment written by Karl-Erik Thelning and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel and its Heat Treatment: Bofors Handbook describes the fundamental metallographic concepts, materials testing, hardenability, heat treatment, and dimensional changes that occur during the hardening and tempering stages of steel. The book explains the boundaries separating the grain contents of steel, which are the low-angle grain boundaries, the high-angle grain boundaries, and the twinning boundaries. Engineers can determine the hardenability of steel through the Grossman test or the Jominy End-Quench test. Special hardening and tempering methods are employed for steel that are going to be fabricated into tools. The different methods of hardening are manual hardening for a small surface (the tip of a screw); spin hardening for objects with a rotational symmetry (gears with 5 modules or less); and progressive hardening (or a combination with spin hardening) for flat surfaces. The hardening and tempering processes cause changes in size and shape of the substance. The text presents examples of dimensional changes during the hardening and tempering of tool steels such as those occurring in plain-carbon steels and low-alloy steels. The book is a source of reliable information needed by engineers, tool and small equipment designers, as well as by metallurgists, structural, and mechanical engineers.

Book History  Developments and Trends in the Heat Treatment of Steel

Download or read book History Developments and Trends in the Heat Treatment of Steel written by Peter Jurči and published by MDPI. This book was released on 2021-03-01 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steels and their heat treatment are still very important in modern industry because most industrial components are made from these materials. The proper choice of steel grades along with their suitable processing makes it possible to reduce the weight of the components, which is closely related to energy and fuel savings. This has decisive importance in branches such as the automotive, transport, consumer industries. A great number of novel heat- and surface-treatment techniques have been developed over the past three decades. These techniques involve, for example, vacuum treatment, sub-zero treatment, laser/electron beam surface hardening and alloying, low-pressure carburizing and nitriding, and physical vapour deposition. This Special Issue contains a collection of original research articles on not only advanced heat-treatment techniques—carburizing and sub-zero treatments—but also on the microstructure–property relationships in different ferrous alloys.

Book Practical Nitriding and Ferritic Nitrocarburizing

Download or read book Practical Nitriding and Ferritic Nitrocarburizing written by David Pye and published by ASM International. This book was released on 2003 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Principles of heat treatment of steels

Download or read book Principles of heat treatment of steels written by Romesh C. Sharma and published by New Age International. This book was released on 2003 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Treatment Of Steels As An Art To Improve Their Service Performance Has Been Practised Ever Since It Started To Be Used As Tools And Weapons.However, The Scientific Basis Of Heat Treatment Of Steels Became More Apparent Only In The First Half Of This Century And Still Some Gaps Remain In Its Complete Understanding.Earlier Books On Heat Treatment Of Steels Mainly Emphasised The Art And The Empirically Arrived Principles Of Heat Treatment. In The Last Few Decades, Our Understanding Of Phase Transformations And Mechanical Behaviour Of Steels, And Consequently Of Heat Treatment Of Steels, Has Considerably Increased.In This Book On Principles Of Heat Treatment Of Steels The Emphasis Is On The Scientific Principles Behind The Various Heat Treatment Processes Of Steels. Though It Is Expected That The Reader Has Sufficient Background In Phase Transformations And Mechanical Behaviour Of Materials, First Few Chapters Review These Topics With Specific Reference To Steels. Basic Principles Of Various Heat Treatment Processes Of Steels Including Surface Hardening Processes, Are Then Covered In Sufficient Detail To Give A Good Overall Understanding Of These Processes. The Detail Engineering Aspects Are, However, Omitted. These Are Easily Available In Various Handbooks On Heat Treatment. The Book Also Covers Heat Treatment Of Tool Steels And Cast Irons.The Book Has Been Well Written And Can Be Used A Textbook On Heat Treatment For Undergraduate Students. It Is Also A Good Reference Book For Teachers And Researchers In This Area And Engineers In The Industry.

Book Grind Hardening Process

Download or read book Grind Hardening Process written by Konstantinos Salonitis and published by Springer. This book was released on 2015-05-25 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the grind-hardening process and the main studies published since it was introduced in 1990s. The modelling of the various aspects of the process, such as the process forces, temperature profile developed, hardness profiles, residual stresses etc. are described in detail. The book is of interest to the research community working with mathematical modeling and optimization of manufacturing processes.

Book Steels  Processing  Structure  and Performance  Second Edition

Download or read book Steels Processing Structure and Performance Second Edition written by George Krauss and published by ASM International. This book was released on 2015-03-01 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: George Krauss, University Emeritus Professor, Colorado School of Mines and author of the best-selling ASM book Steels: Processing, Structure, and Performance, discusses some of the important additions and updates to the new second edition.

Book Corrosion of Aluminium

Download or read book Corrosion of Aluminium written by Christian Vargel and published by Elsevier. This book was released on 2004-10-02 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion of Aluminium highlights the practical and general aspects of the corrosion of aluminium alloys with many illustrations and references. In addition to that, the first chapter allows the reader who is not very familiar with aluminium to understand the metallurgical, chemical and physical features of the aluminium alloys. The author Christian Vargel, has adopted a practitioner approach, based on the expertise and experience gained from a 40 year career in aluminium corrosion This approach is most suitable for assessing the corrosion resistance of aluminium- an assessment which is one of the main conditions for the development of many uses of aluminium in transport, construction, power transmission etc. - 600 bibliographic references provide a comprehensive guide to over 100 years of related study - Providing practical applications to the reader across many industries - Accessible to both the beginner and the expert

Book Knife Engineering

    Book Details:
  • Author : Larrin Thomas
  • Publisher :
  • Release : 2020-07-16
  • ISBN : 9781087902159
  • Pages : 282 pages

Download or read book Knife Engineering written by Larrin Thomas and published by . This book was released on 2020-07-16 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: An in-depth exploration of the effects of different steels, heat treatments, and edge geometries on knife performance. This book provides ratings for toughness, edge retention, and corrosion resistance for all of the popular knife steels. Micrographs of over 50 steels. Specific recommended heat treatments for each steel. And answers to questions like: 1) Does a thinner or thicker edge last longer? 2) What heat treatment leads to the best performance? 3) Are there performance benefits to forging blades? 4) Should I use stainless or carbon steel? All of these questions and more are answered by a metallurgist who grew up around the knife industry.