Download or read book Surface Engineering of Polymeric Biomaterials written by Todorka G Vladkova and published by Smithers Rapra. This book was released on 2013-01-10 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomaterials work in contact with living matter and this gives a number of specific requirements for their surface properties, such as bioinertness or bioactivity, antibiofouling, and so on. Surface engineering based on physical, chemical, physical-chemical, biochemical or biological principles is important for the preparation of biomaterials with the desired biocontact properties. This book helps the reader gain the knowledge to enable them to work in such a rapidly developing area, with a comprehensive list of references given for each chapter. Strategies for tailoring the biological response through the creation of biomaterial surfaces resistant to fouling are discussed. Methods of eliciting specific biomolecular interactions that can be further combined with patterning techniques to engineer adhesive areas in a noninteractive background are also covered. The theoretical basis of surface engineering for improvement of biocontact properties of polymeric biomaterials as well as the current state-of-the-art of the surface engineering of polymeric biomaterials are presented. The book also includes information on the most used conventional and advanced surface engineering methods. The book is targeted at researchers, post-doctorates, graduate students, and those already working in the field of biomaterials with a special interest in the creation of polymeric materials with improved biocontact properties via surface engineering.
Download or read book Characterization of Polymeric Biomaterials written by Maria Cristina Tanzi and published by Woodhead Publishing. This book was released on 2017-06-20 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Characterization of Polymeric Biomaterials presents a comprehensive introduction on the topic before discussing the morphology and surface characterization of biomedical polymers. The structural, mechanical, and biological characterization is described in detail, followed by invaluable case studies of polymer biomaterial implants. With comprehensive coverage of both theoretical and experimental information, this title will provide scientists with an essential guide on the topic of these materials which are regularly used for clinical applications, such as implants and drug delivery devices. However, a range of novel polymers and the development and modification of existing medical polymers means that there is an ongoing need to satisfy particular design requirements. This book explains the critical and fundamentals methods to characterize polymer materials for biomedical applications. Presents a self-contained reference on the characterization of polymeric biomaterials Provides comprehensive information on how to characterize biomedical polymers in order to improve design and synthesis Includes useful case studies that demonstrate the characterization of biomaterial implants
Download or read book Nanoscale Engineering of Biomaterials Properties and Applications written by Lalit M. Pandey and published by Springer Nature. This book was released on 2022-02-16 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of the latest advances in a wide range of biomaterials for the development of smart and advanced functional materials. It discusses the fundamentals of bio-interfacial interactions and the surface engineering of emerging biomaterials like metals and alloys, polymers, ceramics, and composites/nanocomposites. In turn, the book addresses the latest techniques and approaches to engineering material surfaces/interfaces in, e.g., implants, tissue engineering, drug delivery, antifouling, and dentistry. Lastly, it summarizes various challenges in the design and development of novel biomaterials. Given its scope, it offers a valuable source of information for students, academics, physicians and particularly researchers from diverse disciplines such as material science and engineering, polymer engineering, biotechnology, bioengineering, chemistry, chemical engineering, nanotechnology, and biomedical engineering for various commercial and scientific applications.
Download or read book Surface Engineering of Polymer Membranes written by Zhi-Kang Xu and published by Springer Science & Business Media. This book was released on 2009-05-15 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Engineering of Polymer Membranes covers the processes that modify membrane surfaces to improve their in-service performance, meaning, to confer surface properties which are different from the bulk properties. Purposes may be to minimize fouling, modulate hydrophilicity/ hydrophobicity, enhance biocompatibility, create diffusion barriers, provide functionalities, mimic biomembranes, fabricate nanostructures, etc. First, the basics of surface engineering of polymer membranes are covered. Then topics such as surface modification by graft polymerization and macromolecule immobilization, biomimetic surfaces, enzyme immobilization, molecular recognition, and nanostructured surfaces are discussed. This book provides a unique synthesis of the knowledge of the role of surface chemistry and physics in membrane science. Dr. Zhikang Xu of the Institute of Polymer Science of Zhejiang University has eight Chinese patents and in 2006 was honored as a Distinguished Young Scholar by the National Natural Science Foundation of China (NNSFC).
Download or read book Polymeric Biomaterials written by Severian Dumitriu and published by CRC Press. This book was released on 2020-03-05 with total page 1764 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomaterials have had a major impact on the practice of contemporary medicine and patient care. Growing into a major interdisciplinary effort involving chemists, biologists, engineers, and physicians, biomaterials development has enabled the creation of high-quality devices, implants, and drug carriers with greater biocompatibility and biofunctiona
Download or read book Surface Modification of Polymeric Biomaterials written by Buddy D. Ratner and published by . This book was released on 2014-01-15 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering of Biomaterials written by Venina dos Santos and published by Springer. This book was released on 2017-05-31 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on biomaterials of different forms used for medical implants. The authors introduce the characteristics and properties of biomaterials and then dedicate special chapters to metallic, ceramic, polymeric and composite biomaterials. Case studies on sterilization methods by biomaterials are also presented. Finally, the authors describe the degradation and effects of biomaterials in living tissue.
Download or read book Polymeric Biomaterials Structure and function written by Severian Dumitriu and published by CRC Press. This book was released on 2013 with total page 922 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of a bestseller, this comprehensive reference presents the latest polymer developments and most up-to-date applications of polymeric biomaterials in medicine. Expanded into two volumes, the first volume covers the structure and properties of synthetic and natural polymers as well as bioresorbable hybrid membranes, drug delivery systems, cell bioassay systems, and electrospinning for regenerative medicine. This substantially larger resource includes state-of-the-art research and successful breakthroughs in applications that have occurred in the last ten years.
Download or read book Surface Engineering of Polymer Membranes written by Zhi-Kang Xu and published by Springer. This book was released on 2009-01-29 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Engineering of Polymer Membranes covers the processes that modify membrane surfaces to improve their in-service performance, meaning, to confer surface properties which are different from the bulk properties. Purposes may be to minimize fouling, modulate hydrophilicity/ hydrophobicity, enhance biocompatibility, create diffusion barriers, provide functionalities, mimic biomembranes, fabricate nanostructures, etc. First, the basics of surface engineering of polymer membranes are covered. Then topics such as surface modification by graft polymerization and macromolecule immobilization, biomimetic surfaces, enzyme immobilization, molecular recognition, and nanostructured surfaces are discussed. This book provides a unique synthesis of the knowledge of the role of surface chemistry and physics in membrane science. Dr. Zhikang Xu of the Institute of Polymer Science of Zhejiang University has eight Chinese patents and in 2006 was honored as a Distinguished Young Scholar by the National Natural Science Foundation of China (NNSFC).
Download or read book Materials for Biomedical Engineering Thermoset and Thermoplastic Polymers written by Valentina Grumezescu and published by Elsevier. This book was released on 2019-03-21 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for Biomedical Engineering: Thermoset and Thermoplastic Polymers presents the newest and most interesting approaches to intelligent polymer engineering in both current and future progress in biomedical sciences. Particular emphasis is placed on the properties needed for each selected polymer and how to increase their biomedical potential in varying applications, such as drug delivery and tissue engineering. These materials are intended for use in diagnoses, therapy and prophylaxis, but are also relatable to other biomedical related applications, such as sensors. Recent developments and future perspectives regarding their use in biomedicine are discussed in detail, making this book an ideal source on the topic. Highlights the most well-known applications of thermoset and thermoplastic polymers in biological and biomedical engineering Presents novel opportunities and ideas for developing or improving technologies in materials for companies, those in biomedical industries, and others Features at least 50% of references from the last 2-3 years
Download or read book Surface Engineering of Biomaterials written by Ajit Behera and published by CRC Press. This book was released on 2024-03-20 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface engineering provides one of the most important means of engineering product differentiation in terms of quality, performance, and lifecycle cost. It is essential to achieve predetermined functional properties of materials such as mechanical strength, biocompatibility, corrosion resistance, wear resistance, and heat and oxidation resistance. Surface Engineering of Biomaterials addresses this topic across a diverse range of process technologies and healthcare applications. Introduces biomaterial surface science and surface engineering and includes criteria for biomaterial surface selection Focuses on a broad array of materials including metals, ceramics, polymers, alloys, and composites Discusses corrosion, degradation, and material release issues in implant materials Covers various processing routes to develop biomaterial surfaces, including for smart and energy applications Details techniques for post-modification of biomaterial surfaces This reference work helps researchers working at the intersection of materials science and biotechnology to engineer functional biomaterials for a variety of applications.
Download or read book Polymeric Biomaterials for Tissue Regeneration written by Changyou Gao and published by Springer. This book was released on 2016-10-08 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews state-of-the-art of polymeric biomaterials for regenerative medicine, and highlights advances in both basic science and clinical practice. It summarizes the latest techniques in polymeric scaffold fabrication, delivery carriers, physicochemical property modulation, as well as their influence on adhesion and the performance of biomolecules, cells and tissues. It also describes methods for creating biofunctional surfaces/interfaces and subsequently modulating the host response to implantable materials. Lastly, it discusses the applications of biomaterials and constructs in soft-tissue regenerative medicine. It is a valuable resource for materials scientists and engineers wishing to identify research priorities to fulfill clinical needs and provides physicians with insights into emerging novel biomaterials. This integrated approach also offers engineering students a sense of the relevance of materials science in the development of novel therapeutic strategies.
Download or read book Polymer Surface Modification Relevance to Adhesion Volume 2 written by Kash L. Mittal and published by CRC Press. This book was released on 2023-01-06 with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book chronicles the proceedings of the Second International Symposium on Polymer Surface Modification: Relevance to Adhesion held Newark, New Jersey, May 24--26, 1999. Polymeric materials are intrinsically not very adhesionable and this necessitates their surface treatment to enhance their adhesion characteristics to other materials. Since the first symposium on this topic, held in 1993, there has been a tremendous R&D activity in devising novel or ameliorating the existing techniques for surface modification of polymers. This volume contains a total of 32 papers, which have been rigorously peer-reviewed and suitably revised before inclusion in this volume. The book is divided into three parts as follows. Part 1: Plasma Surface Modification Techniques; Part 2: Other/Miscellaneous Surface Modification Techniques; and Part 3: General Papers. The topics covered include: plasma surface modification of a variety of polymers using various plasma gases; atmospheric plasma system; surface functionalization; ultrahydrophobic polymeric surfaces; metallization of plasma treated polymers; surface modification of polymers via molecular design for adhesion promotion; wet chemical methods for polymer surface modification; laser surface modification of various polymers; UV/ozone treatment; surface and interface studies of treated polymer surfaces by an array of techniques; bioadhesion of polymeric biomaterials to tissue; polymer-fiber systems; and plasma deposited coatings.
Download or read book Biomaterials Surface Science written by Andreas Taubert and published by John Wiley & Sons. This book was released on 2013-07-23 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: At the interface of biology, chemistry, and materials science, this book provides an overview of this vibrant research field, treating the seemingly distinct disciplines in a unified way by adopting the common viewpoint of surface science. The editors, themselves prolific researchers, have assembled here a team of top-notch international scientists who read like a "who's who" of biomaterials science and engineering. They cover topics ranging from micro- and nanostructuring for imparting functionality in a top-down manner to the bottom-up fabrication of gradient surfaces by self-assembly, from interfaces between biomaterials and living matter to smart, stimuli-responsive surfaces, and from cell and surface mechanics to the elucidation of cell-chip interactions in biomedical devices. As a result, the book explains the complex interplay of cell behavior and the physics and materials science of artificial devices. Of equal interest to young, ambitious scientists as well as to experienced researchers.
Download or read book Natural and Synthetic Biomedical Polymers written by Sangamesh G. Kum bar and published by Newnes. This book was released on 2014-01-21 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers are important and attractive biomaterials for researchers and clinical applications due to the ease of tailoring their chemical, physical and biological properties for target devices. Due to this versatility they are rapidly replacing other classes of biomaterials such as ceramics or metals. As a result, the demand for biomedical polymers has grown exponentially and supports a diverse and highly monetized research community. Currently worth $1.2bn in 2009 (up from $650m in 2000), biomedical polymers are expected to achieve a CAGR of 9.8% until 2015, supporting a current research community of approximately 28,000+. Summarizing the main advances in biopolymer development of the last decades, this work systematically covers both the physical science and biomedical engineering of the multidisciplinary field. Coverage extends across synthesis, characterization, design consideration and biomedical applications. The work supports scientists researching the formulation of novel polymers with desirable physical, chemical, biological, biomechanical and degradation properties for specific targeted biomedical applications. Combines chemistry, biology and engineering for expert and appropriate integration of design and engineering of polymeric biomaterials Physical, chemical, biological, biomechanical and degradation properties alongside currently deployed clinical applications of specific biomaterials aids use as single source reference on field. 15+ case studies provides in-depth analysis of currently used polymeric biomaterials, aiding design considerations for the future
Download or read book Comprehensive Biomaterials Biocompatibility surface engineering and delivery of drugs genes and other molecules written by Paul Ducheyne and published by . This book was released on 2011 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomaterials is a dynamic, changing field that impacts modern medicine and therapeutics in diverse ways. This modern, all-encompassing comprehensive treatment accurately captures the diversity, breadth and dimensions of the biomaterials field. It describes the many modern aspects of biomaterials - from basic science to clinical applications - across the formulations and chemistry of polymers, ceramics and metals and their use in various biomedical devices and implants, as well as their clinical performance and host responses. Conventional clinically accepted biomaterials as well as emerging prototypes, studies and new ideas, along with visionary predictions of future biomaterials compositions and capabilities, are all extensively covered by hundreds of experts in the field. Reviews the current status of nearly all biomaterials in the field by analyzing their strengths and weaknesses, performance as well as future prospects Presents appropriate analytical methods and testing procedures in addition to potential device applications Provides strategic insights for those working on diverse application areas such as R&D, regulatory management, and commercial development
Download or read book Biomaterials written by Joyce Y. Wong and published by CRC Press. This book was released on 2012-12-06 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most current applications of biomaterials involve structural functions, even in those organs and systems that are not primarily structural in their nature, or very simple chemical or electrical functions. Complex chemical functions, such as those of the liver, and complex electrical or electrochemical functions, such as those of the brain and sense organs, cannot be carried out by biomaterials at this time. With these basic concepts in mind, Biomaterials: Principles and Practices focuses on biomaterials consisting of different materials such as metallic, ceramic, polymeric, and composite. It highlights the impact of recent advances in the area of nano- and microtechnology on biomaterial design. Discusses the biocompatibility of metallic implants and corrosion in an in vivo environment Provides a general overview of the relatively bioinert, bioactive or surface-reactive ceramics, and biodegradable or resorbable bioceramics Reviews the basic chemical and physical properties of synthetic polymers, the sterilization of the polymeric biomaterials, the importance of the surface treatment for improving biocompatibility, and the application of the chemogradient surface for the study on cell-to-polymer interactions Covers the fundamentals of composite materials and their applications in biomaterials Highlights commercially significant and successful biomedical biodegradable polymers Examines failure modes of different types of implants based on material, location, and function in the body The book discusses the role of biomaterials as governed by the interaction between the material and the body, specifically, the effect of the body environment on the material and the effect of the material on the body.
