Download or read book Surface Effects in Solid Mechanics written by Holm Altenbach and published by Springer Science & Business Media. This book was released on 2013-03-12 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the actual state of the art and future trends of surface effects in solid mechanics. Surface effects are more and more important in the precise description of the behavior of advanced materials. One of the reasons for this is the well-known from the experiments fact that the mechanical properties are significantly influenced if the structural size is very small like, for example, nanostructures. In this book, various authors study the influence of surface effects in the elasticity, plasticity, viscoelasticity. In addition, the authors discuss all important different approaches to model such effects. These are based on various theoretical frameworks such as continuum theories or molecular modeling. The book also presents applications of the modeling approaches.
Download or read book Surface Effects in Magnetic Nanoparticles written by Dino Fiorani and published by Springer Science & Business Media. This book was released on 2006-06-09 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: A collection of articles on different approaches to the investigation of surface effects on nanosized magnetic materials, with special emphasis on magnetic nanoparticles. The book provides an overview of progress in the field through recent results.
Download or read book Surface Effects and Contact Mechanics IX written by J. T. M. de Hosson and published by WIT Press. This book was released on 2009 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experiments, and discusses the following topics: Surface treatments; Thick coatings; Thin coatings; Surface problems in contact mechanics; Indentation and hardness; Fatigue; Numerical analysis; Applications and case studies." --Book Jacket.
Download or read book Surface effects in adhesion friction wear and lubrication written by Donald H. Buckley and published by Elsevier. This book was released on 1981-01-01 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface effects in adhesion, friction, wear, and lubrication
Download or read book Surface Effects and Contact Mechanics including Tribology XII written by J.Th.M. De Hossen and published by WIT Press. This book was released on 2015-04-21 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains papers from the twelfth in a series of biennial conferences, first held in 1993, on the topics of contact mechanics and surface effects and their interaction. In general, structural components fail by wear, corrosion and fatigue, that is to say affected and initiated by surface conditions. Consequently, it is often appropriate to modify the surface layer of a base material or coat it, so as to provide an enhanced performance or longer life. However, in many cases it is the combined effect of wear and corrosion that is damaging, contributing to complexity in determining the proper approach. The surface treatment chosen should be suitably related to the problem to be solved. The necessary thickness of the coating depends largely on the applied loading and environmental conditions. The papers in the book address novel protective layers for advances in sliding wear and low friction. The contents cover topics such as: Experimental and Measurement Tests; Surface Modification; Surface Problems in Contact Mechanics; Thick and Thin Coatings; Tribomechanics; Computer Simulation.
Download or read book Surface Effects and Contact Mechanics XI written by J. Th. M. De Hosson and published by WIT Press. This book was released on 2013 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing the papers from the eleventh biennial conference on the topic, first held in 1993, this book covers contact mechanics and surface effects and their interaction, so important in modern engineering. The life and performance of structural components is affected by surface conditions such as wear, corrosion and, high cycle fatigue. Surface treatments that address contact conditions can reduce costs by extending the life of components. Hence the importance of the conference discussions.The book's papers cover such matters as Experimental and measurement tests; Fracture fatigue and mechanics; Surface modification; Surface problems in contact mechanics; Thick and thin coatings; Heat transfers; Multiscale experiments and modelling; Computer simulation; Biocompatible materials; Vacuum technologies; Residual stress problems; Tribomechanics; Case studies.
Download or read book Surface Effects and Contact Mechanics X written by J. T. M. De Hosson and published by WIT Press. This book was released on 2011 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contact mechanics and surface effects, as well as their interaction, are important in modern engineering. The life and performance of structural components is affected by surface conditions such as wear, corrosion and, high cycle fatigue. Surface treatments that address contact conditions can reduce costs by extending the life of components. These are the subjects of a biennial conference first held in 1993, the papers from the latest of which are collected in this volume. The book discusses Computer simulation; Surface modification; Surface treatments; Surface problems in contact mechanics; Contact mechanics; Applications and case studies; Indentation and hardness; Thick and thin coatings; Corrosion problems; Nano-characterisation; Test methodology; Multiscale experiments and modelling; and Fracture fatigue and mechanics.
Download or read book IUTAM Symposium on Surface Effects in the Mechanics of Nanomaterials and Heterostructures written by Alan Cocks and published by Springer Science & Business Media. This book was released on 2012-09-26 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume constitutes the proceedings of the IUTAM Symposium on Surface Effects in the Mechanics of Nanomaterials and Heterostructures, held in Beijing, 8-12 August, 2010. The symposium brought together the most active scientists working in this area from the fields of solid mechanics, composites, physics, and materials science and summarized the state-of-the-art research results with a view to advancing the frontiers of mechanics and materials physics. Nanomaterials and heterostructures have a large fraction of their atoms at surfaces and interfaces. These atoms see a different environment to those in the interior and can have a substantial effect on the overall mechanical and physical behaviour of a material. The last decade has witnessed a growing interest in the study of surfaces and how the surface behaviour couples with that of the bulk to determine the overall system response. The papers in this proceedings cover: extension of continuum mechanics and thermodynamics to the nano-scale; multiscale simulations; surface effects in monolithic nano-scale elements and nanostructures; mechanical and physical properties of nanomaterials and heterostructures; self-assembly, etc. The surface stress effect is inherently a multidisciplinary and fertile field; the Symposium truly reflects these features. This IUTAM Symposium was also dedicated to Professor Bhushan L Karihaloo of Cardiff University on his impending retirement, in recognition of his contributions to the fields of solid mechanics and nanomechanics, and to IUTAM activities in general.
Download or read book Parametric Study of Large Nuclear Surface Effects Machines written by Albert F. Kascak and published by . This book was released on 1969 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fermi Surface Effects written by Jun Kondo and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is the proceedings of the Tsukuba Institute '87 on Fermi Surface Effects, which was held August 27-29, 1987, at Tsukuba Science City in Japan. The topic of the Institute, Fermi surface effects, is one of the fascinating subjects of solid-state physics. It has been known since Sommerfeld's work that the conduction electrons of metals constitute a degenerate Fermi system, and it has also been recognized that the occu pation number of the electron states has a discontinuity across the Fermi surface. Several basic properties of metal electrons stem from this fact. Furthermore, it gives rise to a singular response of the metal electrons to local and dynamical perturbations of low frequency. Such singular behav ior of the metal electrons is called a Fermi surface effect. In his opening address, printed as the Foreword, Professor R. Kubo described Fermi sur face effects as due to "wild" behavior of the metal electrons. The Institute co~sisted of five invited lectures, each of which was two hours long and dealt with theoretical aspects of a subject related to Fermi surface effects. Each lecturer is an expert in the field, and gave an in tensive treatment of his own subject. The experiment of inviting only very few lecturers and allotting them ample time for both presentation and discussion seems to have been successful. This Institute, which was sponsored by the Japan Industrial Technology Association, will probably be followed by other institutes, forming a series.
Download or read book The Art of Polymer Clay Creative Surface Effects written by Donna Kato and published by Watson-Guptill. This book was released on 2007 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer clay has grown and grown and grown in popularity since the publication of Donna Kato’s best-selling The Art of Polymer Clay in 1997. And there have been so many technical advances, too. Now poly-diva Donna Kato presents an all-new look at one of crafters’ all-time favorite mediums. Donna Kato’s Polymer Clay Innovations begins with the essentials of polymer clay, including its working properties, plus tools, curing, safety recommendations, and color blending (with full information on the now-indispensable Skinner Blend). Photo-packed chapters focus on exciting projects—beads, bracelets, pins, pendants, and boxes--and showcase new techniques, including image transfers, surface treatments such as stencils, stamps, paints, and inks, sculpting, inclusions, special effects, and finishing. Finished pieces by some of the biggest names in polymer clay, including Kathleen Dustin, Pier Voulkos, and Nan Roche, plus Donna Kato herself, offer ideas and inspiration.
Download or read book Fatigue of Structures and Materials written by J. Schijve and published by Springer Science & Business Media. This book was released on 2008-12-16 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue of structures and materials covers a wide scope of different topics. The purpose of the present book is to explain these topics, to indicate how they can be analyzed, and how this can contribute to the designing of fatigue resistant structures and to prevent structural fatigue problems in service. Chapter 1 gives a general survey of the topic with brief comments on the signi?cance of the aspects involved. This serves as a kind of a program for the following chapters. The central issues in this book are predictions of fatigue properties and designing against fatigue. These objectives cannot be realized without a physical and mechanical understanding of all relevant conditions. In Chapter 2 the book starts with basic concepts of what happens in the material of a structure under cyclic loads. It illustrates the large number of variables which can affect fatigue properties and it provides the essential background knowledge for subsequent chapters. Different subjects are presented in the following main parts: • Basic chapters on fatigue properties and predictions (Chapters 2–8) • Load spectra and fatigue under variable-amplitude loading (Chapters 9–11) • Fatigue tests and scatter (Chapters 12 and 13) • Special fatigue conditions (Chapters 14–17) • Fatigue of joints and structures (Chapters 18–20) • Fiber-metal laminates (Chapter 21) Each chapter presents a discussion of a speci?c subject.
Download or read book The Surface Effect written by André Nusselder and published by Routledge. This book was released on 2013 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lacan's theory of fantasy.
Download or read book Characterization of Amorphous and Crystalline Rough Surface Principles and Applications written by and published by Elsevier. This book was released on 2000-10-23 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: The structure of a growth or an etch front on a surface is not only a subject of great interest from the practical point of view but also is of fundamental scientific interest. Very often surfaces are created under non-equilibrium conditions such that the morphology is not always smooth. In addition to a detailed description of the characteristics of random rough surfaces, Experimental Methods in the Physical Sciences, Volume 37, Characterization of Amorphous and Crystalline Rough Surface-Principles and Applications will focus on the basic principles of real and diffraction techniques for quantitative characterization of the rough surfaces. The book thus includes the latest development on the characterization and measurements of a wide variety of rough surfaces. The complementary nature of the real space and diffraction techniques is fully displayed.Key Features* An accessible description of quantitative characterization of random rough surfaces and growth/etch fronts* A detailed description of the principles, experimentation, and limitations of advanced real-space imaging techniques (such as atomic force microscopy) and diffraction techniques (such as light scattering, X-ray diffraction, and electron diffraction)* Characterization of a variety of rough surfaces (e.g., self-affine, mounded, anisotropic, and two-level surfaces) accompanied by quantitative examples to illustrate the essence of the principles* An insightful description of how rough surfaces are formed* Presentation of the most recent examples of the applications of rough surfaces in various areas
Download or read book Surface Treatment Methods of Natural Fibres and their Effects on Biocomposites written by Asim Shahzad and published by Woodhead Publishing. This book was released on 2022-03-25 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural fiber composites have experienced a renaissance over the last two decades as a response to societal demands for developing eco-friendly, biodegradable and recyclable materials. They are now being extensively used in everyday products as well as in automotive, packaging, sports and the construction industries. These fibers require surface treatments in order to improve their properties and interfacial bonding with polymer matrices, and to reduce their hydrophilic character. These methods can be grouped into three major categories: chemical, physical and biological. Chemical methods use chemical reagents to reduce fibers' hydrophilic tendency and thus improve compatibility with the matrix. They also expose more reactive groups on the fibre surface to facilitate efficient coupling with the matrix. Physical methods change structural and surface properties of the fiber and thereby influence the interfacial bonding with matrices, without extensively changing the chemical composition of the fibers. They are cleaner and simpler than the chemical methods. Biological methods use biological agents like fungi, enzymes and bacteria to modify the fiber surface properties. These methods are not toxic like chemical methods and are not energy-intensive like physical methods.Surface Treatment Methods of Natural Fibers and their Effects on Biocomposites presents an overview and recent developments of these methods. All the major methods are reviewed, explaining the science and methodology behind each method. The effects of these methods on various properties of fibers and the biocomposites made from these fibers are analyzed in detail.The book will be an essential reference for academic researchers, materials scientists and engineers, postgraduate students and industrial researchers and development scientists and engineers working on natural fibers and biocomposites. - Extensive coverage of all the surface modification methods (chemical, physical, biological) of natural fibers and its effect on properties of produced composites - The chemical mechanisms which are utilized in surface treatments are discussed in detail and how these affect the interfacial properties and characteristics - Systematic and comprehensive review on surface modifications of natural fibres, and explains how the effect of the surface treatment can be characterized and measured, as well as the effect on properties
Download or read book The Chemistry of Fusion Technology written by D. Gruen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear energy obtained from thermonuclear fusion of light nuclei is a goal to which an increasing world-wide effort is being committed. The demands on energy reserves and resources are continually increasing as ever more coun tries achieve modern industrial status. All projections agree that conventional means of energy production must be supplemented and indeed supplanted by new methods. Only the date at which the transition becomes imperative is subject to debate. The promise of fusion energy ultimately to pro vide a clean, cheap, dependable and potentially inexhaustible energy source augurs well for the future of the human race. If there were illusions at the start of the quest for controlled thermonuclear power that solutions would be easily found, the past two decades have dlspelled them. Unwarranted optimism has been replaced by a realistic recognition of the immense scientific and technological challenges that arise in bringing about practical fusion energy. Broadly speaking, problems can be put into two categories--those having to do with heating the fuel to thermonuclear temperatures at high enough particle densities and for sufficiently long confine ment times to yield a net power return and those having to do with the actual construction of a power producing fusion reactor.
Download or read book Towards a Unified Fatigue Life Prediction Method for Marine Structures written by Weicheng Cui and published by Springer. This book was released on 2014-11-04 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to apply the damage tolerance design philosophy to design marine structures, accurate prediction of fatigue crack growth under service conditions is required. Now, more and more people have realized that only a fatigue life prediction method based on fatigue crack propagation (FCP) theory has the potential to explain various fatigue phenomena observed. In this book, the issues leading towards the development of a unified fatigue life prediction (UFLP) method based on FCP theory are addressed. Based on the philosophy of the UFLP method, the current inconsistency between fatigue design and inspection of marine structures could be resolved. This book presents the state-of-the-art and recent advances, including those by the authors, in fatigue studies. It is designed to lead the future directions and to provide a useful tool in many practical applications. It is intended to address to engineers, naval architects, research staff, professionals and graduates engaged in fatigue prevention design and survey of marine structures, in fatigue studies of materials and structures, in experimental laboratory research, in planning the repair and maintenance of existing structures, and in rule development. The book is also an effective educational aid in naval architecture, marine, civil and mechanical engineering. Prof. Weicheng Cui is the Dean of Hadal Science and Technology Research Center of Shanghai Ocean University, China. Dr. Xiaoping Huang is an associate professor of School of Naval Architecture, Ocean and Civil Engineering of Shanghai Jiao Tong University, China. Dr. Fang Wang is an associate professor of Hadal Science and Technology Research Center of Shanghai Ocean University, China.
