Download or read book Oxide Surfaces written by and published by Elsevier. This book was released on 2001-05-21 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a multi-author survey (in 15 chapters) of the current state of knowledge and recent developments in our understanding of oxide surfaces. The author list includes most of the acknowledged world experts in this field. The material covered includes fundamental theory and experimental studies of the geometrical, vibrational and electronic structure of such surfaces, but with a special emphasis on the chemical properties and associated reactivity. The main focus is on metal oxides but coverage extends from 'simple' rocksalt materials such as MgO through to complex transition metal oxides with different valencies.
Download or read book Physics and Chemistry at Oxide Surfaces written by Claudine Noguera and published by Cambridge University Press. This book was released on 1996-09-28 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first chapter of the book summarizes classical approaches, introduces the concept of ionicity, and describes the mixed iono-covalent character of the oxygen cation bond in bulk materials. The next three chapters focus on the characteristics of the atomic structure (relaxation, rumpling and reconstruction effects), the electronic structure (band width, gap width, etc.) and the excitations of clean surfaces.
Download or read book Transition Metal Oxides written by H.H. Kung and published by Elsevier. This book was released on 1989-04-01 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book the author presents an up-to-date summary of existing information on the structure, electronic properties, chemistry and catalytic properties of transition metal oxides.The subjects covered in the book can be divided into three sections. The first (chapters 1 to 3) covers the structural, physical, magnetic, and electronic properties of transition metal oxides. Although the emphasis is on surface properties, relevant bulk properties are also discussed. The second section (chapters 4 to 7) covers surface chemical properties. It includes topics that describe the importance of surface coordinative unsaturation in adsorption, the formation of surface acidity and the role of acidity in determining surface chemical properties, the nature and reactivities of adsorbed oxygen, and the surface chemistry in the reduction of oxides. The third section (chapters 8 to 14) is on the catalytic properties. Various catalytic reactions including decomposition, hydrogenation, isomerization, metathesis, selective oxidation, and reactions involving carbon oxides are discussed. Emphasis is placed more on reaction mechanisms and the role of catalysts than on kinetics and processes. Chapters on the preparation of oxide catalysts and on photo-assisted processes are also included. Whenever appropriate, relationships between various topics are indicated.Written for surface physicists, chemists, and catalytic engineers, the book will serve as a useful source of information for investigators and as a comprehensive overview of the subject for graduate students.
Download or read book Defects at Oxide Surfaces written by Jacques Jupille and published by Springer. This book was released on 2015-02-09 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the basics and characterization of defects at oxide surfaces. It provides a state-of-the-art review of the field, containing information to the various types of surface defects, describes analytical methods to study defects, their chemical activity and the catalytic reactivity of oxides. Numerical simulations of defective structures complete the picture developed. Defects on planar surfaces form the focus of much of the book, although the investigation of powder samples also form an important part. The experimental study of planar surfaces opens the possibility of applying the large armoury of techniques that have been developed over the last half-century to study surfaces in ultra-high vacuum. This enables the acquisition of atomic level data under well-controlled conditions, providing a stringent test of theoretical methods. The latter can then be more reliably applied to systems such as nanoparticles for which accurate methods of characterization of structure and electronic properties have yet to be developed. The book gives guidance to tailor oxide surfaces by controlling the nature and concentration of defects. The importance of defects in the physics and chemistry of metal oxide surfaces is presented in this book together with the prominent role of oxides in common life. The book contains contributions from leaders in the field. It serves as a reference for experts and beginners in the field.
Download or read book The Surface Science of Metal Oxides written by Victor E. Henrich and published by Cambridge University Press. This book was released on 1994 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description
Download or read book Metal Oxide Nanoparticles 2 Volume Set written by Oliver Diwald and published by John Wiley & Sons. This book was released on 2021-09-14 with total page 903 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanoparticles A complete nanoparticle resource for chemists and industry professionals Metal oxide nanoparticles are integral to a wide range of natural and technological processes—from mineral transformation to electronics. Additionally, the fields of engineering, electronics, energy technology, and electronics all utilize metal oxide nanoparticle powders. Metal Oxide Nanoparticles: Formation, Functional Properties, and Interfaces presents readers with the most relevant synthesis and formulation approaches for using metal oxide nanoparticles as functional materials. It covers common processing routes and the assessment of physical and chemical particle properties through comprehensive and complementary characterization methods. This book will serve as an introduction to nanoparticle formulation, their interface chemistry and functional properties at the nanoscale. It will also act as an in-depth resource, sharing detailed information on advanced approaches to the physical, chemical, surface, and interface characterization of metal oxide nanoparticle powders and dispersions. Addresses the application of metal oxide nanoparticles and its economic impact Examines particle synthesis, including the principles of selected bottom-up strategies Explores nanoparticle formulation—a selection of processing and application routes Discusses the significance of particle surfaces and interfaces on structure formation, stability and functional materials properties Covers metal oxide nanoparticle characterization at different length scales With this valuable resource, academic researchers, industrial chemists, and PhD students can all gain insight into the synthesis, properties, and applications of metal oxide nanoparticles.
Download or read book Metal Oxide Chemistry and Synthesis written by Jean-Pierre Jolivet and published by John Wiley & Sons. This book was released on 2000-10-19 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: The precipitation of metal oxides from aqueous solutions creates nanoparticles with interesting solid state properties, thus building a bridge between solution chemistry and solid state chemistry. This book is the first monograph to deal with the formation of metal oxides from aqueous solutions with emphasis on the formation and physical chemistry of nanoparticles. Metal Oxide Chemistry and Synthesis: From Solution to Solid State * Provides a comprehensive introduction to the synthesis of finely divided materials * Presents the chemistry, physics and applications of these materials * Builds a bridge between classical solution chemistry and new developments in solid state chemistry * Introduces an important new area in inorganic chemistry Part I examines the mechanism of condensation of aqueous cations leading to polynuclear species or lattices, and rationalizes the behaviour of cations in precipitation phenomena by identifying pathways from soluble species to solids. The cation complex is also analysed in relation to the synthesis of some technologically interesting polymetallic oxides, e.g. ferroelectric, ferrimagnetic and supraconductor materials. Part II is devoted to the surface chemistry of oxide particles. The basic concepts relating to the reactivity of the oxide-solution interface are introduced and applied to various adsorption phenomena, such as aggregation, stability of particle size against ripening, etc. These properties are exploited for the synthesis of nanomaterials for a broad range of applictions such as ceramic powders, catalysts and nanocomposites. This will also be of interest to those wishing to understand geochemical and some biological processes. As well as being invaluable to researchers and postgraduate students of inorganic chemistry, this book will also be appreciated by solid-state chemists, materials scientists and colloid chemists with an interest in metal oxides.
Download or read book Liquid Cell Electron Microscopy written by Frances M. Ross and published by Cambridge University Press. This book was released on 2017 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: 2.6.2 Electrodes for Electrochemistry
Download or read book Adsorption and Catalysis on Transition Metals and Their Oxides written by Vsevolod F. Kiselev and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with adsorption and catalysis on the surface of transition elements and their compounds, many of which are in teresting because of their particular electronic structure. The authors have worked through a vast body of experimental evi dence on the structure and properties of surfaces of transition metals and relevant oxides. Consideration is given mostly to simple (as opposed to mixed) oxides of transition elements, to common metals and to the adsorption of simple gases. A great deal of attention is paid to the nature of active surface sites responsible for chemisorption and catalytic transformations. The description relies mainly on the simplified ligand-field theory, which, however, proves quite satisfactory for predicting the adsorptive and catalytic activity of species. In many cases simple systems were explored with the aid of novel techniques, and it is only for such systems that the mechanism of the ele mentary act of adsorption and catalysis can be given adequate treatment. The present monograph has emerged from our earlier work in Russian, which appeared in the Khimiya Publishing House (Mos cow) in 1981. This English edition has, however, been revised completely to broaden its scope and to include more recent a chievements. For fruitful discussions the authors are grateful to A.A.
Download or read book Minerals in Soil Environments written by Joe Boris Dixon and published by American Society of Agronomy. This book was released on 1989 with total page 1290 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to soil mineralogy; Surface chemistry of soil minerals; An introduction to organic matter in mineral soils; Mineral equilibria and the soil system; Mineral occurrence in soil environments; Carboonate, halide, sulfate, and sulfide minerals; Aluminum oxides and oxyhydroxides; Iron oxides; Manganese oxides ands hydroxides; Kaolin and serpentine group minerals; The pyrophyllite-talc group; Micas; Vermiculites; Chlorites and hydroxy-interlayered vermiculite and smectite; Interstratification in layer silicates; Palygorskite and sepiolite group minerals; Zeolites in soils; Silica in soils: quartz and disordered silica polymorphs; Feldpars, olivines, pyroxenes, and amphiboles; Allophane and imogolite; Phosphate minerals; Titanium and zirconium minerals.
Download or read book Chemical Dissolution of Metal Oxides written by Miguel A Blesa and published by CRC Press. This book was released on 2018-02-06 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: The dissolution behaviour of metal oxides has applications in many scientific fields, each with its own jargon and methodological approach. Any scientist interested in this subject should understand the literature from these various areas. This book describe different specialized treatments to surface-controlled metal oxide dissolution reactions and translates them into a unified picture based on surface complexion
Download or read book Chemisorption and Reactivity on Supported Clusters and Thin Films written by R.M. Lambert and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heterogeneous catalysis provides the backbone of the world's chemical and oil industries. The innate complexity of practical catalytic systems suggests that useful progress should be achievable by investigating key aspects of catalysis by experimental studies on idealised model systems. Thin films and supported clusters are two promising types of model system that can be used for this purpose, since they mimic important aspects of the properties of practical dispersed catalysts. Similarly, appropriate theoretical studies of chemisorption and surface reaction clusters or extended slab systems can provide valuable information on the factors that underlie bonding and catalytic activity. This volume describes such experimental and theoretical approaches to the surface chemistry and catalytic behaviour of metals, metal oxides and metal/metal oxide systems. An introduction to the principles and main themes of heterogeneous catalysis is followed by detailed accounts of the application of modern experimental and theoretical techniques to fundamental problems. The application of advanced experimental methods is complemented by a full description of theoretical procedures, including Hartree-Fock, density functional and similar techniques. The relative merits of the various approaches are considered and directions for future progress are indicated.
Download or read book Environmental Catalysis written by F J J G Janssen and published by World Scientific. This book was released on 1999-04-14 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together highlights of a theme which is growing in interest: the creation of a sustainable society using catalysis as the main tool. Catalysts play key roles in the production of clean fuels, the conversion of waste and green raw materials into energy, clean combustion engines including control of NOx and soot production and reduction of greenhouse gases, production of clean water and of polymers, as well as reduction from polymers to monomers. Catalysts are also of prime importance in the developing H2 and syngas production technology, aimed at producing clean fuels for the coming decades. And catalysts can be recycled.
Download or read book Surface Chemistry and Catalysis written by Michalis Konsolakis and published by MDPI. This book was released on 2018-09-27 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Surface Chemistry and Catalysis" that was published in Catalysts
Download or read book Aquatic Surface Chemistry written by Werner Stumm and published by John Wiley & Sons. This book was released on 1987-05-11 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive contributed volume presents an account of current research and applications of chemical processes occurring at the interfaces of water with naturally occuring solids. Interactions of solutes with the solid surfaces are looked at from a mechanistic and dynamic point of view rather than a descriptive one. Processes discussed and concepts presented are applicable to all natural waters (oceans and fresh waters as well as soil and sediment water systems) and to the surfaces of natural solids such as minerals, soils, sediments, biota, and humus. Chapters progress from theoretical models and laboratory studies to applications in natural water, soil, and geochemical systems, emphasizing those processes that regulate the distribution and concentration of elements and compounds. Topics covered include adsorption mechanisms in aquatic surface chemistry, the electric double layer at the solid-solution interface, aspects of molecular structure in surface complexes: spectroscopic investigations, interpretation of metal complexation by heterogeneous complexants, the role of colloids in the partitioning of solutes in natural waters, and 'from molecules to planetary environments': understanding global change.
Download or read book Surface and Near surface Chemistry of Oxide Materials written by Janusz Nowotny and published by Elsevier Publishing Company. This book was released on 1988 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to fill the gap in the scientific literature by providing a comprehensive overview on the surface and near-surface chemistry of oxide materials. Oxide materials are important in a wide range of technological applications, which has resulted in a large bibliography devoted to their properties. The range of practical applications of metal oxides has recently been significantly extended by the discovery of high T c oxide superconductors. Surface chemistry overlaps with several other disciplines and involves some specialized physical methods, therefore renown scientists active in various fields were invited to contribute to the book. The present volume involves surface characterization of metal oxides as well as surface and near-surface phenomena including gas-solid, solid-solid and liquid-solid interphases. Both basic problems and applied aspects are covered. The theoretical background of ideal and real surfaces as well as surface phenomena such as adsorption, segregation, interphase interactions, equilibration, etc., are dealt with. A comprehensive description is given of the most useful experimental techniques for studying surface and near-surface (grain boundary) chemistry of ceramic materials, oxide catalysts, semiconductors and other oxide materials of practical importance. The range of practical applications of metal oxides has recently been significantly extended by the discovery of high T c oxide superconductors. A special chapter is devoted to High T c oxide superconductors, which provides an up-to-date and thorough review of this currently ''hot topic'' which will be of great interest to a wide section of the scientific community.
Download or read book Adsorption on New and Modified Inorganic Sorbents written by A. Dabrowski and published by Elsevier. This book was released on 1996-01-15 with total page 945 pages. Available in PDF, EPUB and Kindle. Book excerpt: There has been a lack of authoritative, current information on the structure, investigation and preparation of inorganic sorbents, their numerous applications as well as the adsorption from gaseous and liquid phases on new and chemically modified inorganic solids. This volume deals with the above-mentioned themes and presents 34 up-to-date comprehensive and critical reviews written by well-recognized authorities. The sorbents discussed are primarily mineral ones. Each contribution treats a problem critically by showing its development, presenting documentation on the state-of-the-art and identifying subjects for further research. The book will be of interest to researchers in academic institutes and industrial laboratories engaged in the fields of surface chemistry, inorganic chemistry, adsorption, ion-exchange, catalysis, chromatography and spectroscopy of the surface phenomena, as well as to students attending graduate and postgraduate courses.
