Download or read book Surface Characterization of Impurities in Superconducting Niobium for Radio Frequency RF Cavities Used in Particle Accelerators written by Prateek Maheshwari and published by . This book was released on 2012 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Integrated Surface Topography Characterization of Variously Polished Niobium for Superconducting Particle Accelerators written by and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: As superconducting niobium radio-frequency (SRF) cavities approach fundamental material limits, there is increased interest in understanding the details of topographical influences on realized performance limitations. Micro-and nano-roughness are implicated in both direct geometrical field enhancements as well as complications of the composition of the 50 nm surface layer in which the super-currents flow. Interior surface chemical polishing (BCP/EP) to remove mechanical damage leaves surface topography, including pits and protrusions of varying sharpness. These may promote RF magnetic field entry, locally quenching superconductivity, so as to degrade cavity performance. A more incisive analysis of surface topography than the widely-used average roughness is needed. In this study, a power spectral density (PSD) approach based on Fourier analysis of surface topography data acquired by both stylus profilometry and atomic force microscopy (AFM) is being used to distinguish the scale-dependent smoothing effects. The topographical evolution of the Nb surface as a function of different steps of EP is reported, resulting in a novel qualitative and quantitative description of Nb surface topography.

Download or read book Methodology for the Characterization of Surface Treated High Purity Niobium written by Santosh Chetri and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-purity niobium is the material of choice for making superconducting radio-frequency cavities for the modern particle accelerator. While making the cavities from the Nb sheet, it goes through a series of processes including chemical and thermal treatments. These treatments affect the microstructural as well as magnetic properties of niobium. In order to optimize the efficiency of Nb cavities, various treatments have been explored. During the last decade, surface modification through impurity diffusion has been extensively explored and found that the quality factor of Nb cavities can be enhanced by impurity diffusion to the niobium surface. The surface treatments that are found to enhance the quality factor include high-temperature nitrogen doping, low-temperature nitrogen infusion, and most recently mid-temperature furnace baking. Even though these treatments have been shown to improve cavity performance, the fundamental understanding of the phenomenon is very limited, and each treatment has its own drawbacks. During the operation of Nb cavities, the oscillating electromagnetic field penetrates the Nb surface only to the 40-200 nm depth. Hence, the cavity performance is dependent largely on the condition of this layer. Thus, a detailed understanding of the effect of different treatments on the Nb surface is essential.Cutting a Nb cavity for the characterization of its surface after different treatments is economically not viable and the characterizing tools are also limited for the cut-out samples. Based on the characterization techniques, the requirements for sample shape and size vary, for example, microscopy, x-ray photoelectron spectroscopy, ellipsometry et cetera require flat samples whereas magnetization measurements are best made using cylindrical samples. Hence, using a coupon sample characterization turns out to be a cost-effective way of probing the effect of different processing steps. In this thesis, I have used surface-characterizing tools such as scanning electron microscopy (SEM), x-ray photoelectron spectroscopy (XPS), and magnetization to explore the effect of some of the recent cavity treatments on the microstructure, chemistry, and magnetic properties of high purity Nb surface. The goal is to construct a coupon-based methodology to explore the effect of different processing treatments.

Download or read book Investigation of the Superconducting Properties of Niobium Radio frequency Cavities written by Gianluigi Ciovati and published by . This book was released on 2005 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Surface Characterization of Nb Samples Electropolished Together with Real Superconducting Rf Accelerator Cavities written by and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Here, we report the results of surface characterizations of niobium (Nb) samples electropolished together with a single cell superconducting radio-frequency accelerator cavity. These witness samples were located in three regions of the cavity, namely at the equator, the iris and the beam-pipe. Auger electron spectroscopy (AES) was utilized to probe the chemical composition of the topmost four atomic layers. Scanning electron microscopy with energy dispersive X-ray for elemental analysis (SEM/EDX) was used to observe the surface topography and chemical composition at the micrometer scale. A few atomic layers of sulfur (S) were found covering the samples non-uniformly. Niobium oxide granules with a sharp geometry were observed on every sample. Some Nb-O granules appeared to also contain sulfur.

Download or read book Surface Polishing of Niobium for Superconducting Radio Frequency SRF Cavity Application written by Liang Zhao (Ph. D.) and published by . This book was released on 2015 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Surface Polishing of Niobium for Superconducting Radio Frequency SRF Cavity Applications written by and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Niobium cavities are important components in modern particle accelerators based on superconducting radio frequency (SRF) technology. The interior of SRF cavities are cleaned and polished in order to produce high accelerating field and low power dissipation on the cavity wall. Current polishing methods, buffered chemical polishing (BCP) and electro-polishing (EP), have their advantages and limitations. We seek to improve current methods and explore laser polishing (LP) as a greener alternative of chemical methods. The topography and removal rate of BCP at different conditions (duration, temperature, sample orientation, flow rate) was studied with optical microscopy, scanning electron microscopy (SEM), and electron backscatter diffraction (EBSD). Differential etching on different crystal orientations is the main contributor to fine grain niobium BCP topography, with gas evolution playing a secondary role. The surface of single crystal and bi-crystal niobium is smooth even after heavy BCP. The topography of fine grain niobium depends on total removal. The removal rate increases with temperature and surface acid flow rate within the rage of 0~20 °C, with chemical reaction being the possible dominate rate control mechanism. Surface flow helps to regulate temperature and avoid gas accumulation on the surface. The effect of surface flow rate on niobium EP was studied with optical microscopy, atomic force microscopy (AFM), and power spectral density (PSD) analysis. Within the range of 0~3.7 cm/s, no significant difference was found on the removal rate and the macro roughness. Possible improvement on the micro roughness with increased surface flow rate was observed. The effect of fluence and pulse accumulation on niobium topography during LP was studied with optical microscopy, SEM, AFM, and PSD analysis. Polishing on micro scale was achieved within fluence range of 0.57~0.90 J/cm2, with pulse accumulation adjusted accordingly. Larger area treatment was proved possible by overlapping laser tracks at proper ratio. Comparison of topography and PSD indicates that LP smooths the surface in a way similar to EP. The optimized LP parameters were applied to different types of niobium surfaces representing different stages in cavity fabrication. LP reduces the sharpness on rough surfaces effectively, while doing no harm to smooth surfaces. Secondary ion mass spectrometer (SIMS) analysis showed that LP reduces the oxide layer slightly and no contamination occurred from LP. EBSD showed no significant change on crystal structure after LP.

Download or read book Surface Characterization of Niobium for Superconducting RF Cavities written by Cao Chaoyue and published by . This book was released on 2014 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Surface Characterization of Nb Samples Electro polished Together With Real Superconducting Radio frequency Accelerator Cavities written by and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: We report the results of surface characterizations of niobium (Nb) samples electropolished together with a single cell superconducting radio-frequency accelerator cavity. These witness samples were located in three regions of the cavity, namely at the equator, the iris and the beam-pipe. Auger electron spectroscopy (AES) was utilized to probe the chemical composition of the topmost four atomic layers. Scanning electron microscopy with energy dispersive X-ray for elemental analysis (SEM/EDX) was used to observe the surface topography and chemical composition at the micrometer scale. A few atomic layers of sulfur (S) were found covering the samples non-uniformly. Niobium oxide granules with a sharp geometry were observed on every sample. Some Nb-O granules appeared to also contain sulfur.

Download or read book Spectroscopic Studies of Surface Treatments for Nb SRF Cavities written by Tyagi Puneet Veer and published by LAP Lambert Academic Publishing. This book was released on 2015-12-31 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: The superconducting radio frequency (SRF) cavities are being used worldwide in particle accelerators to achieve a high energy beam of charged particles. These cavities are made of high purity niobium (Nb) material and work at 2 K temperature. The inner surface of these cavities plays the most important role in order to obtain good performances in terms of the high field gradient. Therefore, the surface treatments associated with SRF cavities are the key issues toward the achievement of the high field gradient larger than 35 MV/m during vertical test of the nine-cell cavity for International Linear Collider (ILC). In the recent years, extensive research has been done to enhance the cavity performance by applying improved surface treatments such as mechanical grinding, buffered chemical polishing (BCP), electropolishing (EP), electrochemical buffing (ECB), mechanochemical polishing (MCP), tumbling, etc., followed by various post-treatment methods such as ultrasonic pure water rinse, alcoholic rinse, high pressure water rinse (HPR), hydrogen per oxide rinse and baking etc. to obtain smooth and contaminant free surface.

Download or read book Fastest Electropolishing Technique on Niobium for Particle Accelerators written by and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Field emission on the inner surfaces of niobium (Nb) superconducting radio frequency (SRF) cavities is still one of the major obstacles for reaching high accelerating gradients for SRF community. Our previous experimental results [1] seemed to imply that the threshold of field emission was related to the thickness of Nb surface oxide layers. In this contribution, a more detailed study on the influences of the surface oxide layers on the field emission on Nb surfaces will be reported. By anodization technique, the thickness of the surface pentoxide layer was artificially fabricated from 3nm up to 460nm. A home-made scanning field emission microscope (SFEM) was employed to perform the scans on the surfaces. Emitters were characterized using a scanning electron microscope together with an energy dispersive x-ray analyzer. The experimental results could be understood by a simple model calculation based on classic electromagnetic theory as shown in Ref. 1. Possibly implications for Nb SRF cavity applications from this study will be discussed.

Download or read book Prompt Gamma Neutron Activation Analysis of Niobium for Characterization of Light Interstitials written by Ian J. Love and published by . This book was released on 2017 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: High purity niobium metal is used in the construction of superconducting radio frequency (SRF) cavities in superconducting particle accelerators, such as the Large Hadron Collider (LHC) at CERN or the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory. The usual method for characterizing the impurities in this niobium, the residual resistivity ratio (RRR) technique, can provide information relating to the superconducting quality of the material, and thus, a measure of the impurity content that is not specific to chemical elements. To improve the material quality further, another method must be used to specifically identify the elemental impurities at parts per million (ppm) levels. This study investigates the use of one potential method, Prompt Gamma Neutron Activation Analysis (PGNAA), for the application of high purity niobium metal, through the use of the PGNAA facility at the Oregon State University TRIGA ® Reactor (OSTR). Two “standard” samples were used to determine the response rate of the facility (in cps/g) for elements known as the light interstitials (H, C, N, and O), and five “unknown” samples were analyzed to determine the ability of the PGNAA technique to identify these impurities in a niobium matrix. The PGNAA technique shows promise for characterization of light interstitials in the material matrix of high purity niobium, as all PGNAA results reported are on the same order of magnitude as current chemical analysis results. For this analysis, the response rate of the PGNAA system that is associated with the “standard” sample that most closely conformed to the composition of the unknown samples was used. Additionally, the PGNAA results are well matched to the trends in the impurity values for carbon and nitrogen. With the use of a greater number of “standard” reference samples in future work, a far greater accuracy in the determination of detection limits and concentration values could be achieved.

Download or read book Roughness Analysis of Variously Polished Niobium Surfaces written by and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Niobium superconducting radio frequency (SRF) cavities have gained widespread use in accelerator systems. It has been shown that surface roughness is a determining factor in the cavities' effi ciency and maximum accelerating potential achievable through this technology. Irregularities in the surface can lead to spot heating, undesirable local electrical fi eld enhancement and electron multipacting. Surface quality is typically ensured through the use of acid etching in a Buffered Chemical Polish (BCP) bath and electropolishing (EP). In this study, the effects of these techniques on surface morphology have been investigated in depth. The surface of niobium samples polished using different combinations of these techniques has been characterized through atomic force microscopy (AFM) and stylus profi lometry across a range of length scales. The surface morphology was analyzed using spectral techniques to determine roughness and characteristic dimensions. Experimentation has shown that this method is a valuable tool that provides quantitative information about surface roughness at different length scales. It has demonstrated that light BCP pretreatment and lower electrolyte temperature favors a smoother electropolish. These results will allow for the design of a superior polishing process for niobium SRF cavities and therefore increased accelerator operating effi ciency and power.

Download or read book Surface Studies of Acid treated Niobium for Superconducting Radio Frequency Cavities written by David R. Smith and published by . This book was released on 2004 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Effect of Microscopic Defects on Superconducting Properties of High Purity Niobium Used for SRF Cavities written by Mingmin Wang and published by . This book was released on 2020 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: High purity niobium has been used to fabricate superconducting radio-frequency (SRF) cavities for linear particle accelerator applications for decades due to its high critical temperature (9.3 K) and critical magnetic field. Great progress has been made in achieving high accelerating gradients and quality factors (a measure of efficiency). However, the performance of Nb cavities still suffers from the variability of the material such that high quality factors and accelerating gradients cannot be consistently produced.Trapped magnetic flux is well known for causing significant radio-frequency losses. Both local flux penetration and flux trapping indicate the local suppression of superconductivity. Magnetic flux from both unshielded earth field and thermoelectric currents can be trapped when a cavity is cooled through its superconducting transition temperature. Microstructural defects including hydrogen, grain boundaries, and dislocations are possible causes for flux trapping. However, the details of magnetic flux trapping mechanisms and conditions that enable it are still not clear. Research on this topic has been very active in the SRF community. Cavity studies on flux expulsion after different heat treatments and cooldown procedures have been performed in recent years, but the study of flux trapping mechanisms at the microscopic level is still lacking.In order to study the effect of microscopic defects on flux trapping, single crystal and bicrystal samples were designed with strategically chosen tensile axes to intentionally introduce defects by a 5% tensile strain. Magneto-Optical (MO) Imaging was used to visualize locations where magnetic flux was trapped, and the dislocation substructures were studied using Electron Channeling Contrast Imaging (ECCI).The results show that high angle grain boundaries (HAGB) and low angle grain boundaries (LAGBs) have different flux penetration behaviors. LAGBS could be hydrogen segregation sites leading to precipitation of normal conducting hydrides along LAGBs at ~100-130 K during cooling. In hydrogen contaminated single-crystal samples, large hydride scars (locations where a hydride formed and then dissolved during heating) were observed both at the LAGBs and within the grain after MO cooling; however, only hydrides at the LAGBs appeared to cause premature flux penetration. Flux trapping related to LAGBs could still be observed after the heat treatment removed most of the hydrogen. By contrast, the flux penetration along a HAGB could be turned off by heat treatment that removed hydrogen and restored by reintroducing hydrogen into the sample. This work suggests that HAGBs are not as effective at causing flux penetration or trapping as hydrides and LAGBs.Some deformed bi-crystal samples show correlations between a larger amount of deformation or a higher density of dislocations and more trapped flux. Deformation led to the development of dislocation substructures; however, the effect of dislocation arrangements on flux penetration could not be observed in the current work. Further study with flux measurement techniques of a higher resolution and sensitivity is necessary to understand what kinds of dislocation substructures are most likely to cause flux penetration.

Download or read book Surface Study of Niobium for Superconducting Radio Frequency SRF Accelerators written by Hui Tian and published by . This book was released on 2008 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Topographic Power Spectral Density Study of the Effect of Surface Treatment Processes on Niobium for Superconducting Radio Frequency Accelerator Cavities written by and published by . This book was released on 2012 with total page 43502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microroughness is viewed as a critical issue for attaining optimum performance of superconducting radio frequency accelerator cavities. The principal surface smoothing methods are buffered chemical polish (BCP) and electropolish (EP). The resulting topography is characterized by atomic force microscopy (AFM). The power spectral density (PSD) of AFM data provides a more thorough description of the topography than a single-value roughness measurement. In this work, one dimensional average PSD functions derived from topography of BCP and EP with different controlled starting conditions and durations have been fitted with a combination of power law, K correlation, and shifted Gaussian models to extract characteristic parameters at different spatial harmonic scales. While the simplest characterizations of these data are not new, the systematic tracking of scale-specific roughness as a function of processing is new and offers feedback for tighter process prescriptions more knowledgably targeted at beneficial niobium topography for superconducting radio frequency applications.