Download or read book Electron Spectroscopy for Surface Analysis written by H. Ibach and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of surface physics and surface chemistry as a science is closely related to the technical development of a number of methods involving electrons either as an excitation source or as an emitted particle carrying characteristic information. Many of these various kinds of electron spectroscopies have become commercially available and have made their way into industrial laboratories. Others are still in an early stage, but may become of increasing importance in the future. In this book an assessment of the various merits and possible drawbacks of the most frequently used electron spectroscopies is attempted. Emphasis is put on prac tical examples and experimental design rather than on theoretical considerations. The book addresses itself to the reader who wishes to know which electron spectroscopy or which combination of different electron spectroscopies he may choose for the particular problems under investigation. After a brief introduction the practical design of electron spectrometers and their figures of merit important for the different applications are discussed in Chapter 2. Chapter 3 deals with electron excited electron spectroscopies which are used for the elemental analysis of surfaces. Structure analysis by electron diffrac tion is described in Chapter 4 with special emphasis on the use of electron diffrac tion for the investigation of surface imperfections. For the application of electron diffraction to surface crystallography in general, the reader is referred to Volume 4 of "Topics in Applied Physics".
Download or read book An Introduction to Surface Analysis by XPS and AES written by John F. Watts and published by John Wiley & Sons. This book was released on 2019-08-27 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a concise yet comprehensive introduction to XPS and AES techniques in surface analysis This accessible second edition of the bestselling book, An Introduction to Surface Analysis by XPS and AES, 2nd Edition explores the basic principles and applications of X-ray Photoelectron Spectroscopy (XPS) and Auger Electron Spectroscopy (AES) techniques. It starts with an examination of the basic concepts of electron spectroscopy and electron spectrometer design, followed by a qualitative and quantitative interpretation of the electron spectrum. Chapters examine recent innovations in instrument design and key applications in metallurgy, biomaterials, and electronics. Practical and concise, it includes compositional depth profiling; multi-technique analysis; and everything about samples—including their handling, preparation, stability, and more. Topics discussed in more depth include peak fitting, energy loss background analysis, multi-technique analysis, and multi-technique profiling. The book finishes with chapters on applications of electron spectroscopy in materials science and the comparison of XPS and AES with other analytical techniques. Extensively revised and updated with new material on NAPXPS, twin anode monochromators, gas cluster ion sources, valence band spectra, hydrogen detection, and quantification Explores key spectroscopic techniques in surface analysis Provides descriptions of latest instruments and techniques Includes a detailed glossary of key surface analysis terms Features an extensive bibliography of key references and additional reading Uses a non-theoretical style to appeal to industrial surface analysis sectors An Introduction to Surface Analysis by XPS and AES, 2nd Edition is an excellent introductory text for undergraduates, first-year postgraduates, and industrial users of XPS and AES.
Download or read book Surface Analysis by Electron Spectroscopy written by Graham C. Smith and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is t~e fifth in aseries of scientific textbooks designed to cover advances in selected research fields from a basic and general view point. The reader is taken carefully but rapidly through the introductory material in order that t~e significance of recent developments can be understood with only limited initial knowledge. The inclusion in the Appendix of the abstracts of many of the more important papers in the field provides further assistance for the non-specialist, and acts as aspringboard to supplementary reading for those who wish to consult the original liter ature. Surface analysis has been the subject of numerous books and review articles, and the fundamental scientific principles of t~e more popular techniques are now reasonably weIl established. This book is concerned with the very powerful techniques of Auger electron and X-ray photoelectron spectroscopy (AES and XPS), with an emphasis on how they may be performed as part of a modern analytical facility. Since the development of AES and XPS in the late 1960s and early 1970s there have been great strides forward in the sensitivities and resolutions of the instrumentation. Simultaneously, these spectroscopies have undergone a veritable explosion, both in their acceptance alongside more routine ana1ytical techniques and in the range of problems and materials to which they are applied. As a result, many researchers in industry and in academia now come into contact with AES and XPS not as specialists, but as users.
Download or read book Practical Surface Analysis Auger and X ray Photoelectron Spectroscopy written by D. Briggs and published by . This book was released on 1990-11-30 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this text is to present the background, the important concepts, and tabulated data of Auger electron spectroscopy (AES) and x-ray photoelectron spectroscopy (XPS) in a practical context for those involved in applied surface analysis techniques.
Download or read book An Introduction to Surface Analysis by Electron Spectroscopy written by John F. Watts and published by Oxford University Press, USA. This book was released on 1990 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface analysis--the examination of the outer few nanometers of a material--is a routine undertaking in laboratories throughout the world, and is of great importance in such areas as corrosion, adhesion, polymer surface treatment, and microelectronics fabrication. This handbook provides an introduction to the two most popular surface analysis techniques: X-ray photoelectron spectroscopy and Auger electron spectroscopy. It explains the underlying physical principles, discusses instrumentation, and looks at the interpretation of resulting spectra. Applications of the two techniques are considered, and a critical comparison with other available methods is also included. This fully illustrated guide will be a valuable introduction for students and researchers in physics, engineering, and materials science.
Download or read book An Introduction to Surface Analysis by XPS and AES written by John F. Watts and published by John Wiley & Sons. This book was released on 2019-08-15 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a concise yet comprehensive introduction to XPS and AES techniques in surface analysis This accessible second edition of the bestselling book, An Introduction to Surface Analysis by XPS and AES, 2nd Edition explores the basic principles and applications of X-ray Photoelectron Spectroscopy (XPS) and Auger Electron Spectroscopy (AES) techniques. It starts with an examination of the basic concepts of electron spectroscopy and electron spectrometer design, followed by a qualitative and quantitative interpretation of the electron spectrum. Chapters examine recent innovations in instrument design and key applications in metallurgy, biomaterials, and electronics. Practical and concise, it includes compositional depth profiling; multi-technique analysis; and everything about samples—including their handling, preparation, stability, and more. Topics discussed in more depth include peak fitting, energy loss background analysis, multi-technique analysis, and multi-technique profiling. The book finishes with chapters on applications of electron spectroscopy in materials science and the comparison of XPS and AES with other analytical techniques. Extensively revised and updated with new material on NAPXPS, twin anode monochromators, gas cluster ion sources, valence band spectra, hydrogen detection, and quantification Explores key spectroscopic techniques in surface analysis Provides descriptions of latest instruments and techniques Includes a detailed glossary of key surface analysis terms Features an extensive bibliography of key references and additional reading Uses a non-theoretical style to appeal to industrial surface analysis sectors An Introduction to Surface Analysis by XPS and AES, 2nd Edition is an excellent introductory text for undergraduates, first-year postgraduates, and industrial users of XPS and AES.
Download or read book Auger and X Ray Photoelectron Spectroscopy in Materials Science written by Siegfried Hofmann and published by Springer Science & Business Media. This book was released on 2012-10-25 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: To anyone who is interested in surface chemical analysis of materials on the nanometer scale, this book is prepared to give appropriate information. Based on typical application examples in materials science, a concise approach to all aspects of quantitative analysis of surfaces and thin films with AES and XPS is provided. Starting from basic principles which are step by step developed into practically useful equations, extensive guidance is given to graduate students as well as to experienced researchers. Key chapters are those on quantitative surface analysis and on quantitative depth profiling, including recent developments in topics such as surface excitation parameter and backscattering correction factor. Basic relations are derived for emission and excitation angle dependencies in the analysis of bulk material and of fractional nano-layer structures, and for both smooth and rough surfaces. It is shown how to optimize the analytical strategy, signal-to-noise ratio, certainty and detection limit. Worked examples for quantification of alloys and of layer structures in practical cases (e.g. contamination, evaporation, segregation and oxidation) are used to critically review different approaches to quantification with respect to average matrix correction factors and matrix relative sensitivity factors. State-of-the-art issues in quantitative, destructive and non-destructive depth profiling are discussed with emphasis on sputter depth profiling and on angle resolved XPS and AES. Taking into account preferential sputtering and electron backscattering corrections, an introduction to the mixing-roughness-information depth (MRI) model and its extensions is presented.
Download or read book Quantitative Surface Analysis of Materials written by Symposium on Progress in Quantitative Surface Analysis and published by ASTM International. This book was released on 1986-03 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Methods of Surface Analysis written by J. M. Walls and published by CUP Archive. This book was released on 1990-04-12 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials Characterization written by Yang Leng and published by John Wiley & Sons. This book was released on 2009-03-04 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers state-of-the-art techniques commonly used in modern materials characterization. Two important aspects of characterization, materials structures and chemical analysis, are included. Widely used techniques, such as metallography (light microscopy), X-ray diffraction, transmission and scanning electron microscopy, are described. In addition, the book introduces advanced techniques, including scanning probe microscopy. The second half of the book accordingly presents techniques such as X-ray energy dispersive spectroscopy (commonly equipped in the scanning electron microscope), fluorescence X-ray spectroscopy, and popular surface analysis techniques (XPS and SIMS). Finally, vibrational spectroscopy (FTIR and Raman) and thermal analysis are also covered.
Download or read book Practical Surface Analysis written by David Briggs and published by . This book was released on 1983 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Analysis Methods in Materials Science written by D.J. O'Connor and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: The idea for this book stemmed from a remark by Philip Jennings of Murdoch University in a discussion session following a regular meeting of the Australian Surface Science group. He observed that a text on surface analysis and applica tions to materials suitable for final year undergraduate and postgraduate science students was not currently available. Furthermore, the members of the Australian Surface Science group had the research experience and range of coverage of sur face analytical techniques and applications to provide a text for this purpose. A of techniques and applications to be included was agreed at that meeting. The list intended readership of the book has been broadened since the early discussions, particularly to encompass industrial users, but there has been no significant alter ation in content. The editors, in consultation with the contributors, have agreed that the book should be prepared for four major groups of readers: - senior undergraduate students in chemistry, physics, metallurgy, materials science and materials engineering; - postgraduate students undertaking research that involves the use of analytical techniques; - groups of scientists and engineers attending training courses and workshops on the application of surface analytical techniques in materials science; - industrial scientists and engineers in research and development seeking a description of available surface analytical techniques and guidance on the most appropriate techniques for particular applications. The contributors mostly come from Australia, with the notable exception of Ray Browning from Stanford University.
Download or read book Methods of Surface Analysis written by A.W. Czanderna and published by Elsevier. This book was released on 2012-12-02 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methods of Surface Analysis deals with the determination of the composition of surfaces and the identification of species attached to the surface. The text applies methods of surface analysis to obtain a composition depth profile after various stages of ion etching or sputtering. The composition at the solid—solid interface is revealed by systematically removing atomic planes until the interface of interest is reached, in which the investigator can then determine its composition. The book reviews the effect of ion etching on the results obtained by any method of surface analysis including the effect of the rate of etching, incident energy of the bombarding ion, the properties of the solid, the effect of the ion etching on generating an output signal of electrons, ions, or neutrals. The text also describes the effect of the residual gases in the vacuum environment. The book considers the influence of the sample geometry, of the type (metal, insulator, semiconductor, organic), and of the atomic number can have on surface analysis. The text describes in detail low energy ion scattering spectroscopy, X-ray photoelectron spectroscopy, Auger electron spectroscopy, secondary ion mass spectroscopy, and infrared reflection-absorption spectroscopy. The book can prove useful for researchers, technicians, and scientists whose works involve organic chemistry, analytical chemistry, and other related fields of chemistry, such as physical chemistry or inorganic chemistry.
Download or read book Electron Spectroscopy for Surface Analysis written by H. Ibach and published by Springer. This book was released on 1977-03-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of surface physics and surface chemistry as a science is closely related to the technical development of a number of methods involving electrons either as an excitation source or as an emitted particle carrying characteristic information. Many of these various kinds of electron spectroscopies have become commercially available and have made their way into industrial laboratories. Others are still in an early stage, but may become of increasing importance in the future. In this book an assessment of the various merits and possible drawbacks of the most frequently used electron spectroscopies is attempted. Emphasis is put on prac tical examples and experimental design rather than on theoretical considerations. The book addresses itself to the reader who wishes to know which electron spectroscopy or which combination of different electron spectroscopies he may choose for the particular problems under investigation. After a brief introduction the practical design of electron spectrometers and their figures of merit important for the different applications are discussed in Chapter 2. Chapter 3 deals with electron excited electron spectroscopies which are used for the elemental analysis of surfaces. Structure analysis by electron diffrac tion is described in Chapter 4 with special emphasis on the use of electron diffrac tion for the investigation of surface imperfections. For the application of electron diffraction to surface crystallography in general, the reader is referred to Volume 4 of "Topics in Applied Physics".
Download or read book Surface Analysis by Auger and X Ray Photoelectron Spectroscopy written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Analysis by Auger and X ray Photoelectron Spectroscopy written by David Briggs and published by Im Publications. This book was released on 2003-01-01 with total page 899 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Analysis Methods in Materials Science written by John O'Connor and published by Springer Science & Business Media. This book was released on 2003-04-23 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide to the use of surface analysis techniques, now in its second edition, has expanded to include more techniques, current applications and updated references. It outlines the application of surface analysis techniques to a broad range of studies in materials science and engineering. The book consists of three parts: an extensive introduction to the concepts of surface structure and composition, a techniques section describing 19 techniques and a section on applications. This book is aimed at industrial scientists and engineers in research and development. The level and content of this book make it ideal as a course text for senior undergraduate and postgraduate students in materials science, materials engineering, physics, chemistry and metallurgy.
