Download or read book Paint and Coating Testing Manual written by and published by . This book was released on 1995 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book New Materials for Catalytic Applications written by Vasile I. Parvulescu and published by Elsevier. This book was released on 2016-01-28 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Materials for Catalytic Applications proposes the use of both new and existing materials for catalytic applications, such as zeolites, metal oxides, microporous and mesoporous materials, and monocrystals. In addition, metal-oxides are discussed from a new perspective, i.e. nano- and photocatalytic applications. The material presents these concepts with a new focus on strategies in synthesis, synthesis based on a rational design, the correlation between basic properties/potential applications, and new catalytic solutions for acid-base, redox, hydrogenation, photocatalytic reactions, etc. - Presents organometallic concepts for the synthesis of nanocatalysts - Provides a synthesis of new materials following the fluorolytic sol-gel concept - Covers electronic and photocatalytic properties via synthesis of nano-oxide materials - Details the nature of sites in MOFs generating catalytic properties immobilization of triflates in solid matrices for organic reactions

Download or read book Biolubricants written by Jan C.J. Bart and published by Elsevier. This book was released on 2012-12-18 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lubricants are essential in engineering, however more sustainable formulations are needed to avoid adverse effects on the ecosystem. Bio-based lubricant formulations present a promising solution. Biolubricants: Science and technology is a comprehensive, interdisciplinary and timely review of this important subject.Initial chapters address the principles of lubrication, before systematically reviewing fossil and bio-based feedstock resources for biodegradable lubricants. Further chapters describe catalytic, (bio) chemical functionalisation processes for transformation of feedstocks into commercial products, product development, relevant legislation, life cycle assessment, major product groups and specific performance criteria in all major applications. Final chapters consider markets for biolubricants, issues to consider when selecting and using a lubricant, lubricant disposal and future trends.With its distinguished authors, Biolubricants: Science and technology is a comprehensive reference for an industrial audience of oil formulators and lubrication engineers, as well as researchers and academics with an interest in the subject. It provides an essential overview of scientific and technological developments enabling the cost-effective improvement of biolubricants, something that is crucial for the green future of the lubricant industry. - A comprehensive, interdisciplinary and timely review of bio-based lubricant formulations - Addresses the principles of lubrication - Reviews fossil and bio-based feedstock resources for biodegradable lubricants

Download or read book Chemistry Materials and Properties of Surface Coatings written by Güngör Gündüz and published by DEStech Publications, Inc. This book was released on 2015-05-14 with total page 765 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientific reference covers all surface coatings, paint types, components and formulationsSolvent-, water-based, polymeric, metallic, anti-corrosion, powder and advanced active coatingsChemical equations, molecular configurations and polymer chains linked to key structure/property relationsTechnical details on specialized coatings for marine, automotive and aerospace This professional reference is a unified account of the chemistry and materials science of virtually all major resins, paints, polymeric and inorganic coatings. It offers uniform analyses of the chemical formulations and molecular structures of widely used solvent- and water-based paints and coatings, including discussions of binders, pigments and fillers. In the context of a scientific analysis of structure-property relations the book addresses adhesion, shelf-life, durability, volatility, hardness, mechanical, optical and other engineered qualities. Emerging active coatings such as conductive, self-cleaning, self-healing paints/coatings, plus eco-friendly powder coatings, are included.

Download or read book BASF Handbook on Basics of Coating Technology written by Artur Goldschmidt and published by William Andrew. This book was released on 2003 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new Handbook on Basics of Coating Technology is a classic reference recently updated with 18 years worth of new technology, standards, and developments in the worldwide coating industry. This is an indispensable reference for anyone in the industry. Whether you are involved in traditional processes or the most innovative, this handbook will be a critical addition to your daily routine. Full of color images, graphs, and figures, the handbook comes complete with standard tables, general classification figures, definitions, and an extensive keyword index. Both engineers and technicians will find the answers they need within its pages. Instead of solving problems "after the fact," this handbook helps avoiding them in the first place, saving time and money. This reference also gives beginners and practically oriented readers a journey through the different coating segments clearly illustrated with lots of pictures. It also outlines the social changes in the industry concerning environmental compatibility and toxicology which have seriously affected product development.

Download or read book Handbook of Plastic Foams written by Arthur H. Landrock and published by Elsevier. This book was released on 1995-12-31 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to be a source of practical information on all types of plastic foams (cellular plastics) in use, including the new structural plastic foams. Elastomer (rubber-like) foams are also considered. The book is intended primarily for those who require a non-theoretical, authoritative, easy-to-use handbook in the subject area. It should be of value to materials engineers, plastics fabricators, chemists, chemical engineers and students. Recognized authorities have written several chapters and parts of chapters in their fields of expertise. The book is organized in such a way that information on a desired subject can be found rapidly. An unusual feature is a comprehensive listing of all known standardization documents (test methods, practices, and specifications), including some international standards. Each document includes a brief description of its contents.

Download or read book Catalysis in Micellar and Macromoleular Systems written by Janos Fendler and published by Elsevier. This book was released on 2012-12-02 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalysis in Micellar and Macromolecular Systems provides a comprehensive monograph on the catalyses elicited by aqueous and nonaqueous micelles, synthetic and naturally occurring polymers, and phase-transfer catalysts. It delineates the principles involved in designing appropriate catalytic systems throughout. Additionally, an attempt has been made to tabulate the available data exhaustively. The book discusses the preparation and purification of surfactants; the physical and chemical properties of surfactants and micelles; solubilization in aqueous micellar systems; and the principles of micellar catalysis. Separate chapters cover micellar catalysis of hydrolyses, solvolyses, aminolyses, and miscellaneous ionic reactions; micellar effects on organic equilibria and nucleophilic substitution reactions, and on hydrophobic interactions and protein structure; and radical and excited state reactions in micellar systems. The final chapters deal with interactions in and catalysis by micelles in nonaqueous solvents and in liquid crystalline phases; and catalysis in macromolecular and related systems. This book is aimed at the industrial and academic researcher regardless of his arbitrarily defined subfield, be it organic, inorganic, biological, colloid, etc. The treatment provides guidance and stimulus to bioorganic, inorganic, pharmaceutical, colloid, physical, and polymer chemists as well as to those who seek novel and unique catalysts in industrial processes. It can also serve as the basis of a graduate course.

Download or read book Advanced Chromatographic and Electromigration Methods in BioSciences written by I. Mikšík and published by Elsevier. This book was released on 1998-09-28 with total page 1149 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with chromatographic and electrophoretic methods applied for the separation (quantitation and identification) of biologically relevant compounds. It is assumed that the potential reader is familiar with the basics of chromatographic and electromigration methods. Individual separation modes are dealt with to an extent which follows their applicability for biomedical purposes: liquid chromatography and electromigration methods are therefore highlighted.Each chapter is completed with a list of recent literature covering the 1987-1997 period, which can be used for further guidance of the reader in his/her own field. The chapters have been written by specialists in a particular area and with an emphasis on applications to the biomedical field. This implies that theoretical and instrumental aspects are kept to a minimum which allows the reader to understand the text. Considerable attention is paid to method selection, detection and derivatization procedures and troubleshooting. The majority of examples given represent the analyses of typical naturally-occurring mixtures. Adequate attention is paid to the role of the biological matrix and sample pretreatment, and special attention is given to forensic, toxicological and clinical applications. The book is completed with an extensive Index of Compounds Separated.

Download or read book Vegetable Oil Based Polymers written by Niranjan Karak and published by Elsevier. This book was released on 2012-07-10 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growing need to find a sustainable, environmentally-friendly replacement for petroleum-based materials is fuelling the development of bio-based polymers from renewable resources. Amongst the most promising of these are vegetable oil-based polymeric materials. Vegetable oil-based polymers provides a comprehensive review of the research in this important field.After an introduction to classification and polymerization, Vegetable oil-based polymers goes on to review the factors involved in polymer biodegradation. The extraction, purification and application of vegetable oils are then explored, along with vegetable oil-based polyesters and poly(ester amide)s, polyurethanes and epoxies. The book then reviews polyamides, polyolefins and vegetable oil-based hyperbranched polymers. It concludes with an analysis of vegetable oil-based polymer composites and polymer nanocomposites.Vegetable oil-based polymers is an indispensable guide for all those involved in the research and development of biopolymers as well as the wide range of industries looking for more sustainable polymer materials. - Provides a comprehensive review of recent research in the area of vegetable oil-based polymeric materials - Discusses vegetable oils and their derivatives, biodegradable polymers and the fundamentals of polymers - Explores the extraction, purification and application of vegetable oils, along with vegetable oil-based polyesters and poly(ester amide)s, polyurethanes and epoxies

Download or read book Nanobiomaterials in Drug Delivery written by Alexandru Mihai Grumezescu and published by William Andrew. This book was released on 2016-04-26 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanobiomaterials in Drug Delivery: Applications of Nanobiomaterials presents novel approaches regarding nanostructured drug delivery systems, revealing the most investigated materials for the development of particular nanobioshuttles. This book brings the results of current research to reach those who wish to use this knowledge in an applied setting, providing one coherent text, with focused chapters and easily accessible information. At its core, it is a collection of titles, bringing together many of the novel applications these materials have in biology, also discussing the advantages and disadvantages of each application and the perspectives of the technologies based on these findings. At the moment, there is no other comparable book series covering all the subjects approached in this set of titles. - Provides up-to-date and well-structured reference material for students, researchers, and practitioners working in the biomedical, biotechnological, and engineering fields - Presents a valuable guide to recent scientific progress, along with most known applications of nanomaterials in the biomedical area - Proposes novel opportunities and ideas for developing or improving technologies in nanomedicine/nanobiology

Download or read book Shape Memory Polymers for Biomedical Applications written by L Yahia and published by Elsevier. This book was released on 2015-03-19 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shape memory polymers (SMPs) are an emerging class of smart polymers which give scientists the ability to process the material into a permanent state and predefine a second temporary state which can be triggered by different stimuli. The changing chemistries of SMPs allows scientists to tailor important properties such as strength, stiffness, elasticity and expansion rate. Consequently SMPs are being increasingly used and developed for minimally invasive applications where the material can expand and develop post insertion. This book will provide readers with a comprehensive review of shape memory polymer technologies. Part 1 will discuss the fundamentals and mechanical aspects of SMPs. Chapters in part 2 will look at the range of technologies and materials available for scientific manipulation whilst the final set of chapters will review applications. - Reviews the fundamentals of shape memory polymers with chapters focussing on the basic principles of the materials - Comprehensive coverage of design and mechanical aspects of SMPs - Expert analysis of the range of technologies and materials available for scientific manipulation

Download or read book Applications of Nanocomposite Materials in Dentistry written by Abdullah M. Asiri and published by Woodhead Publishing. This book was released on 2018-11-15 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applications of Nanocomposite Materials in Dentistry presents the study and developments of nano-composite materials for dental applications. Special emphasis is given to the issues related to dental bone regeneration using various types of nano-composite materials, issues of dental failure, antibacterial properties and dental implants. Topics are systematically arranged so that layman can also understand the fundamentals and applications of dental nanocomposites. The book offers a powerful source of exploration on the preparation, characteristics and specific uses of composites in the fields of applied chemistry and medical sciences. - Offers an historical overview of composites materials and their dentistry applications - Outlines the role of nanocomposites and nanotechnology in dentistry - Discusses the properties of nanocomposites for dental grafting, implants and bone tissues

Download or read book Dictionary of Food Compounds with CD ROM written by Shmuel Yannai and published by CRC Press. This book was released on 2003-10-24 with total page 1784 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Dictionary of Food Compounds with CD-ROM: Additives, Flavors, and Ingredients provides comprehensive information on 30,000 compounds found in food, including: NATURAL FOOD CONSTITUENTS Lipids Proteins Carbohydrates Fatty acids Flavonoids Alkaloids FOOD ADDITIVES Colorants Preservatives Antioxidants Fl

Download or read book Challenges in Molecular Structure Determination written by Manfred Reichenbächer and published by Springer Science & Business Media. This book was released on 2012-03-23 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Taking a problem-based approach, the authors provide a practice-oriented and systematic introduction to both organic and inorganic structure determination by spectroscopic methods. This includes mass spectrometry, vibrational spectroscopies, UV/VIS spectroscopy and NMR as well as applying combinations of these methods. The authors show how to elucidate chemical structures with a minimal number of spectroscopic techniques. Readers can train their skills by more than 400 problems with varying degree of sophistication. Interactive Powerpoint-Charts are available as Extra Materials to support self-study.

Download or read book Environmental Management Systems written by Standards Association of Australia and published by . This book was released on 1996 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Structural Steel I and H Sections Tolerances on Shape and Dimensions written by British Standards Institute Staff and published by . This book was released on 1993-12-15 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steels, Structural steels, Metal sections, Dimensions, Straightness measurement, Beams, H-beams, I-beams, Sections (structures), Structural members, Dimensional tolerances, Form tolerances

Download or read book Analysis of Surface Active Agents Raw Materials Ethylene Oxide Adducts Method for Determination of Hydroxyl Value written by British Standards Institute Staff and published by . This book was released on 1988-08-31 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surfactants, Raw materials, Ethylene oxide, Heterocyclic compounds, Hydroxyl value, Esterification, Chemical analysis and testing, Interferences (chemical), Test equipment, Testing conditions, Test specimens, Reproducibility