Download or read book Hybrid Modeling in Process Industries written by Jarka Glassey and published by CRC Press. This book was released on 2018-02-01 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title introduces the underlying theory and demonstrates practical applications in different process industries using hybrid modeling. It reviews hybrid modeling approach applicability in wide range of process industries, recommends how to increase hybrid model performance and throw Insights into cost efficient practices in modeling techniques Discusses advance process operation maximizing the benefits of available process knowledge and Includes real-life and practical case studies
Download or read book Computational Intelligence Techniques for Bioprocess Modelling Supervision and Control written by Maria Carmo Nicoletti and published by Springer. This book was released on 2009-07-09 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Intelligence (CI) and Bioprocess are well-established research areas which have much to offer each other. Under the perspective of the CI area, Biop- cess can be considered a vast application area with a growing number of complex and challenging tasks to be dealt with, whose solutions can contribute to boosting the development of new intelligent techniques as well as to help the refinement and s- cialization of many of the already existing techniques. Under the perspective of the Bioprocess area, CI can be considered a useful repertoire of theories, methods and techniques that can contribute and offer interesting alternative approaches for solving many of its problems, particularly those hard to solve using conventional techniques. Although throughout the past years CI and Bioprocess areas have accumulated substantial specific knowledge and progress has been quick and with a high degree of success, we believe there is still a long way to go in order to use the potentialities of the available CI techniques and knowledge at their full extent, as tools for supporting problem solving in bioprocesses. One of the reasons is the fact that both areas have progressed steadily and have been continuously accumulating and refining specific knowledge; another reason is the high level of technical expertise demanded by each of them. The acquisition of technical skills, experience and good insights in either of the two areas is very demanding and a hard task to be accomplished by any professional.
Download or read book Comprehensive Biotechnology written by and published by Newnes. This book was released on 2011-08-26 with total page 5304 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Comprehensive Biotechnology, Six Volume Set continues the tradition of the first inclusive work on this dynamic field with up-to-date and essential entries on the principles and practice of biotechnology. The integration of the latest relevant science and industry practice with fundamental biotechnology concepts is presented with entries from internationally recognized world leaders in their given fields. With two volumes covering basic fundamentals, and four volumes of applications, from environmental biotechnology and safety to medical biotechnology and healthcare, this work serves the needs of newcomers as well as established experts combining the latest relevant science and industry practice in a manageable format. It is a multi-authored work, written by experts and vetted by a prestigious advisory board and group of volume editors who are biotechnology innovators and educators with international influence. All six volumes are published at the same time, not as a series; this is not a conventional encyclopedia but a symbiotic integration of brief articles on established topics and longer chapters on new emerging areas. Hyperlinks provide sources of extensive additional related information; material authored and edited by world-renown experts in all aspects of the broad multidisciplinary field of biotechnology Scope and nature of the work are vetted by a prestigious International Advisory Board including three Nobel laureates Each article carries a glossary and a professional summary of the authors indicating their appropriate credentials An extensive index for the entire publication gives a complete list of the many topics treated in the increasingly expanding field
Download or read book Computer Applications in Biotechnology written by A. Munack and published by Elsevier. This book was released on 2014-05-23 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 6th Computer Applications in Biotechnology (CAB6) conference was a continuation of 2 series of events: the IFAC symposia on Modelling and Control of Biotechnical Processes and the International Conferences on Computer Applications in Fermentation Technology. This conference provided the opportunity for both sides, leading researchers and industrial practitioners, in this interdisciplinary field to exchange new ideas and technology; concepts and solutions. This postprint volume contains all those papers which were presented at the conference.
Download or read book Journal of Biotechnology written by and published by . This book was released on 1994 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fed Batch Cultures written by Henry C. Lim and published by Cambridge University Press. This book was released on 2013-04-22 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first book dealing exclusively with every aspect of fed-batch operations, used in most industrially important fermentation and bioreactor operations.
Download or read book Dynamics and Control of Process Systems 2001 DYCOPS 6 written by George Stephanopoulos and published by . This book was released on 2001 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fault Detection Supervision and Safety of Technical Processes 2003 SAFEPROCESS 2003 written by Marcel Staroswiecki and published by Elsevier. This book was released on 2004-02-27 with total page 1210 pages. Available in PDF, EPUB and Kindle. Book excerpt: A three-volume work bringing together papers presented at 'SAFEPROCESS 2003', including four plenary papers on statistical, physical-model-based and logical-model-based approaches to fault detection and diagnosis, as well as 178 regular papers.
Download or read book Adaptive and Natural Computing Algorithms written by Bernadete Ribeiro and published by Springer Science & Business Media. This book was released on 2005-03-08 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this volume present theoretical insights and report practical applications both for neural networks, genetic algorithms and evolutionary computation. In the field of natural computing, swarm optimization, bioinformatics and computational biology contributions are no less compelling. A wide selection of contributions report applications of neural networks to process engineering, robotics and control. Contributions also abound in the field of evolutionary computation particularly in combinatorial and optimization problems. Many papers are dedicated to machine learning and heuristics, hybrid intelligent systems and soft computing applications. Some papers are devoted to quantum computation. In addition, kernel based algorithms, able to solve tasks other than classification, represent a revolution in pattern recognition bridging existing gaps. Further topics are intelligent signal processing and computer vision.
Download or read book Current Developments in Biotechnology and Bioengineering written by Ashok Pandey and published by Elsevier. This book was released on 2022-08-18 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Bioprocess Engineering, the latest release in the Current Developments in Biotechnology and Bioengineering series, provides a comprehensive overview of bioprocess systems, kinetics, bioreactor design, batch and continuous reactors and introduces key principles that enable bioprocess engineers to engage in analysis, optimization and design with consistent control over biological and chemical transformations. The bioprocessing sector is also updating its technologies with state-of-the art techniques to keep up with the rising demand of the industry and R&D. This book covers these aspects, taking readers through a step-by-step journey of bioprocessing while also guiding them towards a new era and future. - Covers state-of-the-art, technological advancements in the field of bioprocessing - Includes design and scale-up of bioreactors, monitoring and control systems, advances in upstream and downstream processing - Includes design and development of fermentation processes such as the suitability of experimental design, full factorial, central composite design, Box-Behnken, Plackett-Burman, and more
Download or read book Technology and International Stability SWIIS 2003 written by Peter Kopacek and published by Elsevier. This book was released on 2004-03-05 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: A proceedings in the volume from the IFAC workshop Waterford, Republic of Ireland, 3-5 July 2003
Download or read book System Identification SYSID 03 written by Paul Van Den Hof and published by Elsevier. This book was released on 2004-06-29 with total page 2080 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scope of the symposium covers all major aspects of system identification, experimental modelling, signal processing and adaptive control, ranging from theoretical, methodological and scientific developments to a large variety of (engineering) application areas. It is the intention of the organizers to promote SYSID 2003 as a meeting place where scientists and engineers from several research communities can meet to discuss issues related to these areas. Relevant topics for the symposium program include: Identification of linear and multivariable systems, identification of nonlinear systems, including neural networks, identification of hybrid and distributed systems, Identification for control, experimental modelling in process control, vibration and modal analysis, model validation, monitoring and fault detection, signal processing and communication, parameter estimation and inverse modelling, statistical analysis and uncertainty bounding, adaptive control and data-based controller tuning, learning, data mining and Bayesian approaches, sequential Monte Carlo methods, including particle filtering, applications in process control systems, motion control systems, robotics, aerospace systems, bioengineering and medical systems, physical measurement systems, automotive systems, econometrics, transportation and communication systems *Provides the latest research on System Identification *Contains contributions written by experts in the field *Part of the IFAC Proceedings Series which provides a comprehensive overview of the major topics in control engineering.
Download or read book Process Control Intensification and Digitalisation in Continuous Biomanufacturing written by Ganapathy Subramanian and published by John Wiley & Sons. This book was released on 2021-12-15 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Control, Intensification, and Digitalisation in Continuous Biomanufacturing Explore new trends in continuous biomanufacturing with contributions from leading practitioners in the field With the increasingly widespread acceptance and investment in the ??technology, the last decade has demonstrated the utility of continuous ??processing in the pharmaceutical industry. In Process Control, Intensification, and Digitalisation in Continuous Biomanufacturing, distinguished biotechnologist Dr. Ganapathy Subramanian delivers a comprehensive exploration of the potential of the continuous processing of biological products and discussions of future directions in advancing continuous processing to meet new challenges and demands in the manufacture of therapeutic products. A stand-alone follow-up to the editor’s Continuous Biomanufacturing: Innovative Technologies and Methods published in 2017, this new edited volume focuses on critical aspects of process intensification, process control, and the digital transformation of biopharmaceutical processes. In addition to topics like the use of multivariant data analysis, regulatory concerns, and automation processes, the book also includes: Thorough introductions to capacitance sensors to control feeding strategies and the continuous production of viral vaccines Comprehensive explorations of strategies for the continuous upstream processing of induced microbial systems Practical discussions of preparative hydrophobic interaction chromatography and the design of modern protein-A-resins for continuous biomanufacturing In-depth examinations of bioprocess intensification approaches and the benefits of single use for process intensification Perfect for biotechnologists, bioengineers, pharmaceutical engineers, and process engineers, Process Control, Intensification, and Digitalisation in Continuous Biomanufacturing is also an indispensable resource for chemical engineers seeking a one-stop reference on continuous biomanufacturing.
Download or read book Manufacturing Modelling Management and Control 2004 written by George Chryssolouris and published by Elsevier. This book was released on 2006-02-03 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multiphase Bioreactor Design written by Joaquim M.S. Cabral and published by CRC Press. This book was released on 2001-09-20 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioreaction engineering is fundamental to the optimization of biotechnological processes and the production of biochemicals by enzymes, microbial, plant and animal cells and higher organisms. A reference text for postgraduate students and researchers in biochemical engineering and bioreactor design, Multiphase Bioreactor Design describes the
Download or read book Computational Intelligence Techniques for Bioprocess Modelling Supervision and Control written by Maria Carmo Nicoletti and published by Springer Science & Business Media. This book was released on 2009-06-29 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Intelligence (CI) and Bioprocess are well-established research areas which have much to offer each other. Under the perspective of the CI area, Biop- cess can be considered a vast application area with a growing number of complex and challenging tasks to be dealt with, whose solutions can contribute to boosting the development of new intelligent techniques as well as to help the refinement and s- cialization of many of the already existing techniques. Under the perspective of the Bioprocess area, CI can be considered a useful repertoire of theories, methods and techniques that can contribute and offer interesting alternative approaches for solving many of its problems, particularly those hard to solve using conventional techniques. Although throughout the past years CI and Bioprocess areas have accumulated substantial specific knowledge and progress has been quick and with a high degree of success, we believe there is still a long way to go in order to use the potentialities of the available CI techniques and knowledge at their full extent, as tools for supporting problem solving in bioprocesses. One of the reasons is the fact that both areas have progressed steadily and have been continuously accumulating and refining specific knowledge; another reason is the high level of technical expertise demanded by each of them. The acquisition of technical skills, experience and good insights in either of the two areas is very demanding and a hard task to be accomplished by any professional.
Download or read book Nonlinear Control Systems 2004 written by Frank Allgower and published by Elsevier. This book was released on 2005-02-02 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt:
