Download or read book Scramjets written by Mostafa Barzegar Gerdroodbary and published by Butterworth-Heinemann. This book was released on 2020-07-21 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scramjet engines are a type of jet engine and rely on the combustion of fuel and an oxidizer to produce thrust. While scramjets are conceptually simple, actual implementation is limited by extreme technical challenges. Hypersonic flight within the atmosphere generates immense drag, and temperatures found on the aircraft and within the engine can be much greater than that of the surrounding air. Maintaining combustion in the supersonic flow presents additional challenges, as the fuel must be injected, mixed, ignited, and burned within milliseconds. Fuel mixing, along with the configuration and positioning of the injectors and the boundary conditions, play a key role in combustion efficiency. Scramjets: Fuel Mixing and Injection Systems discusses how fuel mixing efficiency and the advantage of injection systems can enhance the performance of the scramjets. The book begins with the introduction of the supersonic combustion chamber and explains the main parameters on the mixing rate. The configuration of scramjets is then introduced with special emphasis on the main effective parameters on the mixing of fuel inside the scramjets. In addition, basic concepts and principles on the mixing rate and fuel distribution within scramjets are presented. Main effective parameters such as range of fuel concentration for the efficient combustion, pressure of fuel jet and various arrangement of jet injections are also explained. This book is for aeronautical and mechanical engineers as well as those working in supersonic combustion who need to know the effects of compressibility on combustion, of shocks on mixing and on chemical reactions, and vorticity on the flame anchoring. - Explains the main applicable approaches for enhancement of supersonic combustion engines and the new techniques of fuel injection - Shows how the interaction of main air stream with fuel injections can develop the mixing inside the scramjets - Presents results of numerical simulations and how they can be used for the development of the combustion engines

Download or read book The Scramjet Engine written by Corin Segal and published by Cambridge University Press. This book was released on 2009-06-22 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Demand for high-speed propulsion has renewed development of the supersonic combustion ramjet engine (Scramjet engine) for hypersonic flight applications.

Download or read book Turbulent Reactive Flows written by R. Borghi and published by Springer. This book was released on 2012-10-20 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulent reactive flows are of common occurrance in combustion engineering, chemical reactor technology and various types of engines producing power and thrust utilizing chemical and nuclear fuels. Pollutant formation and dispersion in the atmospheric environment and in rivers, lakes and ocean also involve interactions between turbulence, chemical reactivity and heat and mass transfer processes. Considerable advances have occurred over the past twenty years in the understanding, analysis, measurement, prediction and control of turbulent reactive flows. Two main contributors to such advances are improvements in instrumentation and spectacular growth in computation: hardware, sciences and skills and data processing software, each leading to developments in others. Turbulence presents several features that are situation-specific. Both for that reason and a number of others, it is yet difficult to visualize a so-called solution of the turbulence problem or even a generalized approach to the problem. It appears that recognition of patterns and structures in turbulent flow and their study based on considerations of stability, interactions, chaos and fractal character may be opening up an avenue of research that may be leading to a generalized approach to classification and analysis and, possibly, prediction of specific processes in the flowfield. Predictions for engineering use, on the other hand, can be foreseen for sometime to come to depend upon modeling of selected features of turbulence at various levels of sophistication dictated by perceived need and available capability.

Download or read book Scramjet Propulsion written by E. T. Curran and published by AIAA. This book was released on 2001 with total page 1354 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Speed Flight Propulsion Systems written by S. N. B. Murthy and published by AIAA. This book was released on 1991 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Leading researchers provide a cohesive treatment of the complex issues in high-speed propulsion, as well as introductions to the current capabilities for addressing several fundamental aspects of high-speed vehicle propulsion development. Includes more than 380 references, 290 figures and tables, and 185 equations.

Download or read book Hypersonic Airbreathing Propulsion written by William H. Heiser and published by AIAA. This book was released on 1994 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: An almost entirely self-contained engineering textbook primarily for use in undergraduate and graduate courses in airbreathing propulsion. It provides a broad and basic introduction to the elements needed to work in the field as it develops and grows. Homework problems are provided for almost every individual subject. An extensive array of PC-based user-friendly computer programs is provided in order to facilitate repetitious and/or complex calculations. Annotation copyright by Book News, Inc., Portland, OR

Download or read book Ramjet Engines written by Mikhail Makarovich Bondari͡u︡k and published by . This book was released on 1969 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Turbulent Combustion written by Norbert Peters and published by Cambridge University Press. This book was released on 2000-08-15 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combustion of fossil fuels remains a key technology for the foreseeable future. It is therefore important that we understand the mechanisms of combustion and, in particular, the role of turbulence within this process. Combustion always takes place within a turbulent flow field for two reasons: turbulence increases the mixing process and enhances combustion, but at the same time combustion releases heat which generates flow instability through buoyancy, thus enhancing the transition to turbulence. The four chapters of this book present a thorough introduction to the field of turbulent combustion. After an overview of modeling approaches, the three remaining chapters consider the three distinct cases of premixed, non-premixed, and partially premixed combustion, respectively. This book will be of value to researchers and students of engineering and applied mathematics by demonstrating the current theories of turbulent combustion within a unified presentation of the field.

Download or read book Modeling and Simulation of Turbulent Combustion written by Santanu De and published by Springer. This book was released on 2017-12-12 with total page 663 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive review of state-of-the-art models for turbulent combustion, with special emphasis on the theory, development and applications of combustion models in practical combustion systems. It simplifies the complex multi-scale and nonlinear interaction between chemistry and turbulence to allow a broader audience to understand the modeling and numerical simulations of turbulent combustion, which remains at the forefront of research due to its industrial relevance. Further, the book provides a holistic view by covering a diverse range of basic and advanced topics—from the fundamentals of turbulence–chemistry interactions, role of high-performance computing in combustion simulations, and optimization and reduction techniques for chemical kinetics, to state-of-the-art modeling strategies for turbulent premixed and nonpremixed combustion and their applications in engineering contexts.

Download or read book Major Research Topics in Combustion written by M.Y. Hussaini and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Institute for Computer Applications in Science and Engineer ing (ICASE) and NASA Langley Research Center (LaRC) brought together on October 2-4, 1989 experts in the various areas of com bustion with a view to expose them to some combustion problems of technological interest to LaRC and possibly foster interaction with the academic community in these research areas. The top ics chosen for this purpose were flame structure, flame stability, flame holding/extinction, chemical kinetics, turbulence-kinetics in teraction, transition to detonation, and reacting free shear layers. The lead paper set the stage by discussing the status and issues of supersonic combustion relevant to scramjet engine. Then the ex perts were called upon i) to review the current status of knowledge in the aforementioned ;:I. reas, ii) to focus on how this knowledge can be extended and applied to high-speed combustion, and iii) to suggest future directions of research in these areas. Each topic was then dealt with in a position paper followed by formal discussion papers and a general discussion involving the participants. The position papers discussed the state-of-the-art with an emphasis on key issues that needed to be resolved in the near future. The discussion papers crit ically examined these issues and filled in any lacunae therein. The edited versions of the general discussions in the form of questions from the audience and answers from the speakers are included wher ever possible to give the reader the flavor of the lively interactions that took place.

Download or read book Engineering Combustion Essentials written by David S-K. Ting and published by Cambridge Scholars Publishing. This book was released on 2018-09-30 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Whether in the Stone Age or in Greek mythology, fire has always been the essence of life. As G.G. Brown put it in 1928, “Combustion is without exaggeration the most important reaction to the human race. All human and animal existence depends upon combustion as its course of energy.” This book provides a detailed description of the elements of combustion, offering descriptive figures, illustrative quips, and analogies to facilitate understanding. It begins with some historical highlights of the understanding of combustion and technological progresses. It then discusses the thermodynamic and chemical kinetics underlying the fast chemical reactions, before expounding on the fundamental combustion wave, or flame. After this, the book moves onto the premixed turbulent flame and the spark-ignited turbulent flame, before considering the diffusion-controlled, non-premixed flame in both laminar and turbulent forms. The book concludes with explanations of wonderful natural combustion, fire, fire-retarding slime and DNA, and the amazing bombardier beetle.

Download or read book Turbulent Combustion Modeling written by Tarek Echekki and published by Springer Science & Business Media. This book was released on 2010-12-25 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulent combustion sits at the interface of two important nonlinear, multiscale phenomena: chemistry and turbulence. Its study is extremely timely in view of the need to develop new combustion technologies in order to address challenges associated with climate change, energy source uncertainty, and air pollution. Despite the fact that modeling of turbulent combustion is a subject that has been researched for a number of years, its complexity implies that key issues are still eluding, and a theoretical description that is accurate enough to make turbulent combustion models rigorous and quantitative for industrial use is still lacking. In this book, prominent experts review most of the available approaches in modeling turbulent combustion, with particular focus on the exploding increase in computational resources that has allowed the simulation of increasingly detailed phenomena. The relevant algorithms are presented, the theoretical methods are explained, and various application examples are given. The book is intended for a relatively broad audience, including seasoned researchers and graduate students in engineering, applied mathematics and computational science, engine designers and computational fluid dynamics (CFD) practitioners, scientists at funding agencies, and anyone wishing to understand the state-of-the-art and the future directions of this scientifically challenging and practically important field.

Download or read book Subsonic Combustion Ramjet Design written by Antonella Ingenito and published by Springer Nature. This book was released on 2021-01-29 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a step-by-step methodology for the design of ramjet engines. It explores ramjet combustion, provides guidelines on how to size the engines, and discusses performance analysis. The book begins with an introduction to ramjet design, including fundamental definitions in the field. It then discusses ramjet engine performance, and fuels which can be used. Several types of ramjet engines are then explored, and guidelines for their design are presented, including flame holders, injectors, and combustors. Finally, the book concludes with a discussion of the types of materials which should be used for ramjet engines. This book is of interest to engine designers and engineers, researchers, and graduate students, as it collates research in a succinct, clear guide to the issue of designing ramjet engines.

Download or read book Coarse Grained Simulation and Turbulent Mixing written by Fenando F. Grinstein and published by Cambridge University Press. This book was released on 2016-06-30 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews our current understanding of the subject. For graduate students and researchers in computational fluid dynamics and turbulence.

Download or read book Jet in Supersonic Crossflow written by Mingbo Sun and published by . This book was released on 2019 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on research into jets in supersonic crossflow carried out by the authors’ team over the past 15 years, this book summarizes and presents many cutting-edge findings and analyses on this subject. It tackles the complicated mixing process of gas jets and atomization process of liquid jets in supersonic crossflow, and studies their physical mechanisms. Advanced experimental and numerical techniques are applied to further readers’ understanding of atomization, mixing, and combustion of fuel jets in supersonic crossflow, which can promote superior fuel injection design in scramjet engines. The book offers a valuable reference guide for all researchers and engineers working on the design of scramjet engines, and will also benefit graduate students majoring in aeronautical and aerospace engineering.

Download or read book FUNDAMENTALS OF COMBUSTION written by D. P. Mishra and published by PHI Learning Pvt. Ltd.. This book was released on 2007-12-19 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for both undergraduate and postgraduate students of mechanical, aerospace, chemical and metallurgical engineering, this compact and well-knitted textbook provides a sound conceptual basis in fundamentals of combustion processes, highlighting the basic principles of natural laws. In the initial part of the book, chemical thermodynamics, kinetics, and conservation equations are reviewed extensively with a view to preparing students to assimilate quickly intricate aspects of combustion covered in later chapters. Subsequently, the book provides extensive treatments of ‘pre-mixed laminar flame’, and ‘gaseous diffusion flame’, emphasizing the practical aspects of these flames. Besides, liquid droplet combustion under quiescent and convective environment is covered in the book. Simplified analysis of spray combustion is carried out which can be used as a design tool. An extensive treatment on the solid fuel combustion is also included. Emission combustion systems, and how to control emission from them using the latest techniques, constitute the subject matter of the final chapter. Appropriate examples are provided throughout to foster better understanding of the concepts discussed. Chapter-end review questions and problems are included to reinforce the learning process of students.

Download or read book Hypersonic Vehicles written by Giuseppe Pezzella and published by BoD – Books on Demand. This book was released on 2019-10-02 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the aviation field there is great interest in high-speed vehicle design. Hypersonic vehicles represent the next frontier of passenger transportation to and from space. However, several design issues must be addressed, including vehicle aerodynamics and aerothermodynamics, aeroshape design optimization, aerodynamic heating, boundary layer transition, and so on. This book contains valuable contributions focusing on hypervelocity aircraft design. Topics covered include hypersonic aircraft aerodynamic and aerothermodynamic design, especially aeroshape design optimization, computational fluid dynamics, and scramjet propulsion. The book also discusses high-speed flow issues and the challenges to achieving the dream of affordable hypersonic travel. It is hoped that the information contained herein will allow for the development of safe and efficient hypersonic vehicles.