EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Supersonic Laminar Flow Control Research

Download or read book Supersonic Laminar Flow Control Research written by National Aeronautics and Space Adm Nasa and published by . This book was released on 2018-11-02 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of the research is to understand supersonic laminar flow stability, transition, and active control. Some prediction techniques will be developed or modified to analyze laminar flow stability. The effects of supersonic laminar flow with distributed heating and cooling on active control will be studied. The primary tasks of the research applying to the NASA/Ames Proof of Concept (POC) Supersonic Wind Tunnel and Laminar Flow Supersonic Wind Tunnel (LFSWT) nozzle design with laminar flow control are as follows: (1) predictions of supersonic laminar boundary layer stability and transition, (2) effects of wall heating and cooling for supersonic laminar flow control, and (3) performance evaluation of POC and LFSWT nozzles design with wall heating and cooling effects applying at different locations and various length. Lo, Ching F. Unspecified Center...

Book Boundary layer Transition Results from the F 16XL 2 Supersonic Laminar Flow Control Experiment

Download or read book Boundary layer Transition Results from the F 16XL 2 Supersonic Laminar Flow Control Experiment written by Laurie A. Marshall and published by . This book was released on 1999 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: A variable-porosity suction glove has been flown on the F-16XL-2 aircraft to demonstrate the feasibility of this technology for the proposed High-Speed Civil Transport (HSCT). Boundary-layer transition data have been obtained on the titanium glove primarily at Mach 2.0 and altitudes of 53,000-55,000 ft. The objectives of this supersonic laminar flow control flight experiment have been to achieve 50- to 60-percent-chord laminar flow on a highly swept wing at supersonic speeds and to provide data to validate codes and suction design. The most successful laminar flow results have not been obtained at the glove design point (Mach 1.9 at an altitude of 50,000 ft). At Mach 2.0 and an altitude of 53,000 ft, which corresponds to a Reynolds number of 22.7 multiplied by 10[factor 6], optimum suction levels have allowed long runs of a minimum of 46-percent-chord laminar flow to be achieved. This paper discusses research variables that directly impact the ability to obtain laminar flow and techniques to correct for these variables.

Book Boundary layer Transition Results from the F 16xl 2 Supersonic Laminar Flow Control Experiment

Download or read book Boundary layer Transition Results from the F 16xl 2 Supersonic Laminar Flow Control Experiment written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-08-27 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: A variable-porosity suction glove has been flown on the F-16XL-2 aircraft to demonstrate the feasibility of this technology for the proposed High-Speed Civil Transport (HSCT). Boundary-layer transition data have been obtained on the titanium glove primarily at Mach 2.0 and altitudes of 53,000-55,000 ft. The objectives of this supersonic laminar flow control flight experiment have been to achieve 50- to 60-percent-chord laminar flow on a highly swept wing at supersonic speeds and to provide data to validate codes and suction design. The most successful laminar flow results have not been obtained at the glove design point (Mach 1.9 at an altitude of 50,000 ft). At Mach 2.0 and an altitude of 53,000 ft, which corresponds to a Reynolds number of 22.7 X 10(exp 6), optimum suction levels have allowed long runs of a minimum of 46-percent-chord laminar flow to be achieved. This paper discusses research variables that directly impact the ability to obtain laminar flow and techniques to correct for these variables.Marshall, Laurie A.Armstrong Flight Research CenterLAMINAR FLOW; LAMINAR BOUNDARY LAYER; BOUNDARY LAYER TRANSITION; BOUNDARY LAYER CONTROL; SUPERSONIC FLOW; SUCTION; CIVIL AVIATION; SUPERSONIC SPEED; ALTITUDE; MACH NUMBER; SWEPT WINGS; F-16 AIRCRAFT; PRESSURE DISTRIBUTION...

Book Supersonic Laminar Flow Control Research   NASA CR 196260   1994

Download or read book Supersonic Laminar Flow Control Research NASA CR 196260 1994 written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Natural Laminar Flow and Laminar Flow Control

Download or read book Natural Laminar Flow and Laminar Flow Control written by R.W. Barnwell and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research on laminar flow and its transition to turbulent flow has been an important part of fluid dynamics research during the last sixty years. Since transition impacts, in some way, every aspect of aircraft performance, this emphasis is not only understandable but should continue well into the future. The delay of transition through the use of a favorable pressure gradient by proper body shaping (natural laminar flow) or the use of a small amount of suction (laminar flow control) was recognized even in the early 1930s and rapidly became the foundation of much of the laminar flow research in the U.S. and abroad. As one would expect, there have been many approaches, both theoretical and experimental, employed to achieve the substantial progress made to date. Boundary layer stability theories have been formu lated and calibrated by a good deal of wind tunnel and flight experiments. New laminar now airfoils and wings have been designed and many have been employed in aircraft designs. While the early research was, of necessity, concerned with the design of subsonic aircraft interest has steadily moved to higher speeds including those appropriate to planetary entry. Clearly, there have been substantial advances in our understanding of transition physics and in the development and application of transition prediction methodolo gies to the design of aircraft.

Book F 16xl 2 Supersonic Laminar Flow Control Flight Test Experiment

Download or read book F 16xl 2 Supersonic Laminar Flow Control Flight Test Experiment written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-27 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: The F-16XL-2 Supersonic Laminar Flow Control Flight Test Experiment was part of the NASA High-Speed Research Program. The goal of the experiment was to demonstrate extensive laminar flow, to validate computational fluid dynamics (CFD) codes and design methodology, and to establish laminar flow control design criteria. Topics include the flight test hardware and design, airplane modification, the pressure and suction distributions achieved, the laminar flow achieved, and the data analysis and code correlation. Anders, Scott G. and Fischer, Michael C. Langley Research Center RTOP 537-07-23-21

Book Application of Laminar Flow Control to Supersonic Transport Configurations

Download or read book Application of Laminar Flow Control to Supersonic Transport Configurations written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-17 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: The feasibility and impact of implementing a laminar flow control system on a supersonic transport configuration were investigated. A hybrid laminar flow control scheme consisting of suction controlled and natural laminar flow was developed for a double-delta type wing planform. The required suction flow rates were determined from boundary layer stability analyses using representative wing pressure distributions. A preliminary design of structural modifications needed to accommodate suction through a perforated titanium skin was carried out together with the ducting and systems needed to collect, compress and discharge the suction air. The benefits of reduced aerodynamic drag were weighed against the weight, volume and power requirement penalties of suction system installation in a mission performance and sizing program to assess the net benefits. The study showed a feasibility of achieving significant laminarization of the wing surface by use of a hybrid scheme, leading to an 8.2 percent reduction in the cruise drag. This resulted in an 8.5 percent reduction in the maximum takeoff weight and a 12 percent reduction in the fuel burn after the inclusion of the LFC system installation penalties. Several research needs were identified for a resolution of aerodynamics, structural and systems issues before these potential benefits could be realized in a practical system. Parikh, P. G. and Nagel, A. L. Unspecified Center AERODYNAMIC DRAG; BOUNDARY LAYER CONTROL; BOUNDARY LAYER STABILITY; LAMINAR BOUNDARY LAYER; PRESSURE DISTRIBUTION; SUPERSONIC TRANSPORTS; WING PLANFORMS; WINGS; AERODYNAMICS; DRAG REDUCTION; FLOW VELOCITY; LAMINAR FLOW; SUCTION; TAKEOFF; TITANIUM...

Book NASA F 16xl Supersonic Laminar Flow Control Program Overview

Download or read book NASA F 16xl Supersonic Laminar Flow Control Program Overview written by National Aeronautics and Space Adm Nasa and published by Independently Published. This book was released on 2018-12-28 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: The viewgraphs and discussion of the NASA supersonic laminar flow control program are provided. Successful application of laminar flow control to a High Speed Civil Transport (HSCT) offers significant benefits in reductions of take-off gross weight, mission fuel burn, cruise drag, structural temperatures, engine size, emissions, and sonic boom. The ultimate economic success of the proposed HSCT may depend on the successful adaption of laminar flow control, which offers the single most significant potential improvements in lift drag ratio (L/D) of all the aerodynamic technologies under consideration. The F-16XL Supersonic Laminar Flow Control (SLFC) Experiment was conceived based on the encouraging results of in-house and NASA supported industry studies to determine if laminar flow control is feasible for the HSCT. The primary objective is to achieve extensive laminar flow (50-60 percent chord) on a highly swept supersonic wing. Data obtained from the flight test will be used to validate existing Euler and Navier Stokes aerodynamic codes and transition prediction boundary layer stability codes. These validated codes and developed design methodology will be delivered to industry for their use in designing supersonic laminar flow control wings. Results from this experiment will establish preliminary suction system design criteria enabling industry to better size the suction system and develop improved estimates of system weight, fuel volume loss due to wing ducting, turbocompressor power requirements, etc. so that benefits and penalties can be more accurately assessed. Fischer, Michael C. Langley Research Center ...

Book Natural Laminar Flow and Laminar Flow Control

Download or read book Natural Laminar Flow and Laminar Flow Control written by R. W. Barnwell and published by . This book was released on 1992 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research on laminar flow and its transition to turbulent flow has been an important part of fluid dynamics research during the last sixty years. Since transition impacts, in some way, every aspect of aircraft performance, this emphasis is not only understandable but should continue well into the future. The delay of transition through the use of a favorable pressure gradient by proper body shaping (natural laminar flow) or the use of a small amount of suction (laminar flow control) was recognized even in the early 1930s and rapidly became the foundation of much of the laminar flow research in the U.S. and abroad. As one would expect, there have been many approaches, both theoretical and experimental, employed to achieve the substantial progress made to date. Boundary layer stability theories have been formu lated and calibrated by a good deal of wind tunnel and flight experiments. New laminar now airfoils and wings have been designed and many have been employed in aircraft designs. While the early research was, of necessity, concerned with the design of subsonic aircraft interest has steadily moved to higher speeds including those appropriate to planetary entry. Clearly, there have been substantial advances in our understanding of transition physics and in the development and application of transition prediction methodolo gies to the design of aircraft.

Book Effect of Heating and Cooling Strips on Boundary Layer Stability of Nozzles and Test Sections of Supersonic Wind Tunnels

Download or read book Effect of Heating and Cooling Strips on Boundary Layer Stability of Nozzles and Test Sections of Supersonic Wind Tunnels written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-16 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of the research is to understand supersonic laminar flow stability, transition, and active control. Some prediction techniques will be developed or modified to analyze laminar flow stability. The effects of supersonic laminar flow with distributed heating and cooling on active control will be studied. The primary tasks of the research applying to the NASA/Ames Proof of Concept (POC) Supersonic Wind Tunnel and Laminar Flow Supersonic Wind Tunnel (LFSWT) nozzle design with laminar flow control are as follows: (1) predictions of supersonic laminar boundary layer stability and transition, (2) effects of wall heating and cooling for supersonic laminar flow control, and (3) performance evaluation of POC and LFSWT nozzles design with wall heating and cooling effects applying at different locations and various length. Lo, Ching F. Unspecified Center...

Book Research in Natural Laminar Flow and Laminar Flow Control  Part 1

Download or read book Research in Natural Laminar Flow and Laminar Flow Control Part 1 written by and published by . This book was released on 1987 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Research in Natural Laminar Flow and Laminar Flow Control  Part 3

Download or read book Research in Natural Laminar Flow and Laminar Flow Control Part 3 written by and published by . This book was released on 1987 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Summary of Laminar Boundary Layer Control Research

Download or read book Summary of Laminar Boundary Layer Control Research written by Northrop Corporation Boundary Layer Research Section and published by . This book was released on 1964 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: At subsonic speeds, full length laminar flow and low drags were obtained up to high length Reynolds numbers on a thin straight, on a swept laminar suction wing and on a suction body of revolution. Moderately increased suction rates in the most critical region of a straight and a swept laminar suction wing enabled full chord laminar flow in the presence of external sound. Theoretical investigatiions are concerned with nonlinear boundary layer oscillations and stability investigations (assuming small disturbances) of a supersonic laminar boundary layer on a flat plate up to high supersonic speeds as well as on a highly swept supersonic low drag suction wing of low wave drag. On a supersonic flat laminar suction plate with and without weak incident shock waves, extensive laminar flow and low equivalent drags were obtained at M = 3 up to length Reynolds numbers of 26 x 1000000. Further supersonic low drag suction experiments on a suction body of revolution, on a 36 degree supersonic yawing wing, as well as on a 72 degree supersonic yawing wing (swept behind the Mach cone) of low wave drag, are described. The latter wing showed full chord laminar flow with a subsonic type pressure distribution at M = 2 and R sub C approximately equal to 1000000. (Author).

Book Flow and Noise Control  Review and Assessment of Future Directions

Download or read book Flow and Noise Control Review and Assessment of Future Directions written by Russell H. Thomas and published by . This book was released on 2002 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: