Download or read book Ultrafine Grained Materials II written by Yuntian Theodore Zhu and published by John Wiley & Sons. This book was released on 2013-09-25 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of a symposium sponsored by the Shaping and Forming Committee of the Materials Processing and Manufacturing Division (MPMD) and the Mechanical Behavior Committee (Jt. SMD/ASM-MSCTS) of the Structural Materials Division (SMD) of TMS (The Minerals, Metals & Materials Society) and held during the 2002 TMS Annual Meeting in Seattle, Washington February 17-21,2002.

Download or read book Superplasticity of Alloys Intermetallides and Ceramics written by Oscar A. Kaibyshev and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superplasticity is shown to be a universal phenomenon in materials ranging from metals and intermetallics to ceramics. Superplastic deformation facilitates the production of materials with specifically chosen properties. This is illustrated using the examples of Mg-, Al-, and Ti-based commercial alloys, steels, and superalloys. Some of the strenghts of this book are: the broad range of materials studied, the reduction of scientific results to a form suitable for the practitioner, a profound physical analysis of the phenomenon, a new approach to superplastic treatment as a kind of strain-heat treatment, the presentation of new data on superplastic flow and on production techniques of micro- and submicrocrystalline structures.

Download or read book Fundamentals of Creep in Metals and Alloys written by Michael E. Kassner and published by Elsevier. This book was released on 2004-04-06 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials * Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures * Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussionUnderstanding the strength of materials at a range of temperatures is critically important to a huge number of researchers and practitioners from a wide range of fields and industry sectors including metallurgists, industrial designers, aerospace R&D personnel, and structural engineers. The most up-to date and comprehensive book in the field, Fundamentals of Creep in Metals and Alloys discusses the fundamentals of time-dependent plasticity or creep plasticity in metals, alloys and metallic compounds. This is the first book of its kind that provides broad coverage of a range of materials not just a sub-group such as metallic compounds, superalloys or crystals. As such it presents the most balanced view of creep for all materials scientists. The theory of all of these phenomena are extensively reviewed and analysed in view of an extensive bibliography that includes the most recent publications in the field. All sections of the book have undergone extensive peer review and therefore the reader can be sure they have access to the most up-to-date research, fully interrogated, from the world's leading investigators.· Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials· Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures· Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussion

Download or read book Superplasticity in Metals and Ceramics written by T. G. Nieh and published by Cambridge University Press. This book was released on 1997-01-23 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: A materials engineering monograph in the Cambridge Solid State Science Series, first published in 1997.

Download or read book Advanced Aluminum Alloys Containing Scandium written by L S Toropova and published by Routledge. This book was released on 2017-07-05 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book to generalize and analyze the extensive experimental and theoretical results on the phase composition, structure, and properties of aluminum alloys containing scandium. The effects of scandium on these properties are studied from a physico- chemical viewpoint. The authors present binary, ternary, and more complex phase diagrams for these alloys and consider in detail recrystallization, superplastic behavior, and decomposition of supersaturated solid solutions and the effects of solidification conditions on phase equilibria.

Download or read book Hot Deformation and Processing of Aluminum Alloys written by Hugh J. McQueen and published by CRC Press. This book was released on 2011-09-28 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatise on the hot working of aluminum and its alloys, Hot Deformation and Processing of Aluminum Alloys details the possible microstructural developments that can occur with hot deformation of various alloys, as well as the kind of mechanical properties that can be anticipated. The authors take great care to explain and differentiate hot working in the context of other elevated temperature phenomena, such as creep, superplasticity, cold working, and annealing. They also pay particular attention to the fundamental mechanisms of aluminum plasticity at hot working temperatures. Using extensive analysis derived from polarized light optical microscopy (POM), transmission electron microscopy (TEM), x-ray diffraction (XRD) scanning electron-microscopy with electron backscatter imaging (SEM-EBSD), and orientation imaging microscopy (OIM), the authors examine those microstructures that evolve in torsion, compression, extrusion, and rolling. Further microstructural analysis leads to detailed explanations of dynamic recovery (DRV), static recovery (SRV), discontinuous dynamic recrystallization (dDRX), discontinuous static recrystallization (dSRX), grain defining dynamic recovery (gDRV) (formerly geometric dynamic recrystallization, or gDRX), and continuous dynamic recrystallization involving both a single phase (cDRX/1-phase) and multiple phases (cDRX/2-phase). A companion to other works that focus on modeling, manufacturing involving plastic and superplastic deformation, and control of texture and phase transformations, this book provides thorough explanations of microstructural development to lay the foundation for further study of the mechanisms of thermomechanical processes and their application.

Download or read book Handbook of Aluminum written by George E. Totten and published by CRC Press. This book was released on 2003-04-25 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference provides thorough and in-depth coverage of the latest production and processing technologies encountered in the aluminum alloy industry, discussing current analytical methods for aluminum alloy characterization as well as extractive metallurgy, smelting, master alloy formation, and recycling. The Handbook of Aluminum: Volume 2 examin

Download or read book Superplasticity written by K. A. Padmanabhan and published by Springer. This book was released on 2018-12-08 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book combines the perspectives of materials science of Superplasticity, on the one hand, and those of design and mechanics, on the other, in order to provide a holistic view of materials, design, mechanics and performance which will lead to useful solutions of societal benefits, in addition to providing great intellectual challenges. After considering the experimental evidence for superplasticity in different classes of materials, the book discusses the physics-based models, along with their advantages and limitations. Then, the analyses for superplastic forming available in the framework of continuum mechanics, finite element analysis and numerical simulations are presented. Finally, the authors highlight some successful industrial applications. This book is recommended as a text book for courses on Superplasticity and as supplementary use for courses on Materials Processing, Manufacturing, High Temperature Deformation, Nanotechnology and Mechanical Behavior of Materials. Persons working in Department of Materials Science and Engineering, Physics, Mechanics, Mechanical Engineering, Aerospace Engineering, Metallurgy, Ceramics and Geo-sciences are likely to find the book to be useful. It is also recommended as a reference source for practicing engineers involved in the design, processing and manufacture of industrial components, which exploit the unique properties associated with superplastic materials.

Download or read book Hot Deformation and Processing of Aluminum Alloys written by Hugh J. McQueen and published by CRC Press. This book was released on 2016-04-19 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatise on the hot working of aluminum and its alloys, Hot Deformation and Processing of Aluminum Alloys details the possible microstructural developments that can occur with hot deformation of various alloys, as well as the kind of mechanical properties that can be anticipated. The authors take great care to explain and differenti

Download or read book Aluminium Alloys Their Physical and Mechanical Properties written by E.A. Starke and published by Trans Tech Publications Ltd. This book was released on 2000-05-09 with total page 1812 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the 7th International Conference ICAA7, held in Charlottesville, Virginia, April 9-14, 2000

Download or read book Metallurgy and Design of Alloys with Hierarchical Microstructures written by Krishnan K. Sankaran and published by Elsevier. This book was released on 2017-06-14 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallurgy and Design of Alloys with Hierarchical Microstructures covers the fundamentals of processing-microstructure-property relationships and how multiple properties are balanced and optimized in materials with hierarchical microstructures widely used in critical applications. The discussion is based principally on metallic materials used in aircraft structures; however, because they have sufficiently diverse microstructures, the underlying principles can easily be extended to other materials systems. With the increasing microstructural complexity of structural materials, it is important for students, academic researchers and practicing engineers to possess the knowledge of how materials are optimized and how they will behave in service. The book integrates aspects of computational materials science, physical metallurgy, alloy design, process design, and structure-properties relationships, in a manner not done before. It fills a knowledge gap in the interrelationships of multiple microstructural and deformation mechanisms by applying the concepts and tools of designing microstructures for achieving combinations of engineering properties—such as strength, corrosion resistance, durability and damage tolerance in multi-component materials—used for critical structural applications. - Discusses the science behind the properties and performance of advanced metallic materials - Provides for the efficient design of materials and processes to satisfy targeted performance in materials and structures - Enables the selection and development of new alloys for specific applications based upon evaluation of their microstructure as illustrated in this work

Download or read book 13th International Conference on Aluminum Alloys ICAA 13 written by Hasso Weiland and published by Springer. This book was released on 2017-02-28 with total page 1857 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a collection of papers presented at the 13th International Conference on Aluminum Alloys (ICAA-13), the premier global conference for exchanging emerging knowledge on the structure and properties of aluminum materials. The papers are organized around the topics of the science of aluminum alloy design for a range of market applications; the accurate prediction of material properties; novel aluminum products and processes; and emerging developments in recycling and applications using both monolithic and multi-material solutions.

Download or read book Mechanical Properties and Deformation Behavior of Materials Having Ultra Fine Microstructures written by M. Nastasi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: In an attempt to meet the demand for new ultra-high strength materials, the processing of novel material configurations with unique microstructure is being explored in systems which are further and further from equilibrium. One such class of emerging materials is the so-called nanophased or nanostructured materials. This class of materials includes metals and alloys, ceramics, and polymers characterized by controlled ultra-fine microstructural features in the form oflayered, fibrous, or phase and grain distribution. While it is clear that these materials are in an early stage of development, there is now a sufficient body of literature to fuel discussion of how the mechanical properties and deformation behavior can be controlled through control of the microstructure. This NATO-Advanced Study Institute was convened in order to assess our current state of knowledge in the field of mechanical properties and deformation behavior in materials with ultra fine microstructure, to identify opportunities and needs for further research, and to identify the potential for technological applications. The Institute was the first international scientific meeting devoted to a discussion on the mechanical properties and deformation behavior of materials having grain sizes down to a few nanometers. Included in these discussions were the topics of superplasticity, tribology, and the supermodulus effect. Lectures were also presented which covered a variety of other themes including synthesis, characterization, thermodynamic stability, and general physical properties.

Download or read book Aluminium Alloys and Composites written by Kavian Cooke and published by BoD – Books on Demand. This book was released on 2020-03-04 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminium (Al) is a metal of great importance because of its excellent corrosion resistance, high electrical and thermal conductivity, good reflectivity, and very good recycling characteristics. The properties of heat-treatable Al-alloys can be further enhanced by the inclusion of a reinforcing phase that increases the mechanical properties of the overall composite. This book is a comprehensive guide on the different types of aluminum alloys and the new advances that have been made in developing and manufacturing aluminum alloys and composites. This text provides a comprehensive overview of the processing, formability, and chemical composition of aluminum alloys and composites. Part One is focused on evaluating the types and properties of advanced aluminum alloys and composites, while Part Two explores characterization. The advantage of this book is that it provides a detailed review of major advances that have occurred in the development and application of aluminum alloys and composites while outlining a development strategy for these materials.

Download or read book Aluminum Alloys Contemporary Research and Applications written by A. K. Vasudevan and published by Elsevier. This book was released on 2012-12-02 with total page 727 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the structure and properties of the current and potential aluminum alloys in terms of their structure (and structural transformations by new processing methods) and the relationship between structure and mechanical and other properties. The alternative materials that challenge aluminum are considered as well, since the challenge of new competitive materials is a strong influence on innovation. The book bridges the gap between current scientific understanding and engineering practice. It is an up-to-date reference that will be of use to researchers and advanced students in metallurgy and materials engineering.

Download or read book Materials Processing Handbook written by Joanna R. Groza and published by CRC Press. This book was released on 2007-03-28 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of materials science and engineering is rapidly evolving into a science of its own. While traditional literature in this area often concentrates primarily on property and structure, the Materials Processing Handbook provides a much needed examination from the materials processing perspective. This unique focus reflects the changing comple

Download or read book Severe Plastic Deformation written by Burhanettin Altan and published by Nova Publishers. This book was released on 2006 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has been already well established that the nanostructured materials (materials with a grain size of 100mm or less) is the future materials. Nanostructured materials possess properties superior to those of conventional, coarse grained materials. Hence designing potentially cost efficient and environmentally friendly products with better performance is a possibility. Among others, nanostructured materials exhibit increased strength, hardness and ductility and provide an opportunity for superplastic forming. When all the procedures in use for the production of nanostructured materials are examined, only severe plastic deformation (SPD) processes exhibit a potential for producing relatively large samples suitable for industrial applications. In this monograph, the state-of-the-art on severe plastic deformation methods is presented in one volume. The monograph is organised into eight chapters, each of which contains papers on different aspect of severe plastic deformation methods prepared by the experts in this field. The topics covered in the monograph are structure formation, phase transformation, superplasticity, mechanical properties of nanostructured materials, electronic and magnetic properties of nanostructured materials, deformation analysis, novel SPD methods, commercialisation of ECAE method.