Download or read book Superplasticity and Grain Boundaries in Ultrafine Grained Materials written by Peter M. Burgess and published by Elsevier. This book was released on 2011-05-31 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superplasticity is a state in which solid crystalline materials, such as some fine-grained metals, are deformed well beyond their usual breaking point. The phenomenon is of importance in processes such as superplastic forming which allows the manufacture of complex, high-quality components in such areas as aerospace and biomedical engineering.Superplasticity and grain boundaries in ultrafine-grained materials discusses a number of problems associated with grain boundaries in metallic polycrystalline materials. The role of grain boundaries in processes such as grain boundary diffusion, relaxation and grain growth is investigated. The authors explore the formation and evolution of the microstructure, texture and ensembles of grain boundaries in materials produced by severe plastic deformation.Written by two leading experts in the field, Superplasticity and grain boundaries in ultrafine-grained materials significantly advances our understanding of this important phenomenon and will be an important reference work for metallurgists and those involved in superplastic forming processes. - Discusses significant problems associated with grain boundaries in polycrystals incorporating structural superplasticity and grain boundary sliding - Assesses the role of grain boundaries in processes such as grain boundary diffusion, relaxation and grain growth - Explores the formation and evolution of the microstructure, texture and ensembles of grain boundaries in materials produced by severe plastic deformation
Download or read book Superplasticity and Grain Boundaries in Ultrafine Grained Materials written by Aleksandr Petrovich Zhilyaev and published by . This book was released on 2012-12-01 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book deals with a number of problems associated with the description and experimental verification of the individual boundaries and ensembles of the grain boundaries in polycrystals. The role of these boundaries in processes such as grain boundary diffusion, relaxation and grain growth is investigated. It is attempted to construct a general model of superplasticity based on the experimentally determined relationships relating to the bands of co-operative grain boundary sliding. Special attention is given to the problems of formation and evolution of the microstructure, the texture and ensembles of the grain boundaries in materials produced by severe plastic deformation methods.
Download or read book Superplasticity and Grain Boundaries in Ultrafine Grained Materials written by A. I. Pshenichnyuk and published by Woodhead Publishing. This book was released on 2011-06 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book discusses a number of problems associated with grain boundaries in polycrystals and other topics of interest to metallurgists and researchers concerned with the problems of nanomaterials. and nanotechnology.
Download or read book Ultrafine Grained Materials II written by Yuntian Theodore Zhu and published by John Wiley & Sons. This book was released on 2013-09-25 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of a symposium sponsored by the Shaping and Forming Committee of the Materials Processing and Manufacturing Division (MPMD) and the Mechanical Behavior Committee (Jt. SMD/ASM-MSCTS) of the Structural Materials Division (SMD) of TMS (The Minerals, Metals & Materials Society) and held during the 2002 TMS Annual Meeting in Seattle, Washington February 17-21,2002.
Download or read book Superplasticity and Grain Boundaries in Ultrafine Grained Materials written by Alexander P. Zhilyaev and published by Academic Press. This book was released on 2020-11-21 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superplasticity and Grain Boundaries in Ultrafine-Grained Materials, Second Edition, provides cutting-edge modeling solutions surrounding the role of grain boundaries in processes such as grain boundary diffusion, relaxation and grain growth. In addition, the book's authors explore the formation and evolution of the microstructure, texture and ensembles of grain boundaries in materials produced by severe plastic deformation. This updated edition, written by leading experts in the field, has been revised to include new chapters on the basics of nanostructure processing, the influence of deformation mechanisms on grain refinement, processing techniques for ultrafine-grained and nanostructured materials, and much more. - Provides practical applications and methods for the proper implementation of models, allowing for more effective complex metal forming processes - Features new chapters on the microstructure, mechanical behavior and functional properties of HCP metals, processing ultrafine-grained and nanostructured materials, and more - Covers experimental assessment and computational modeling techniques for adiabatic heating and saturation of grain refinement during SPD of metals and alloys
Download or read book Superplasticity written by Oskar Akramovich Kaĭbyshev and published by . This book was released on 2005 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The remarkable technology of superplastic forming was developed and perfected in the former Soviet Union. This volume, written by two Russian scientists at the Institute for Metals Superplasticity Problems in Ufa, Bashkortostan, Russia (of which Kaibyshev was the former director), presents a detailed and up-to-date treatment of the technology, with particular attention to the production of ultrafine grain materials, their use in superplastic shaping and forming, practical aspects of the process, and new developments in submicrocrystalline and nanocrystalline materials production. The comprehensive bibliography of the largely Russian literature will be a valuable resource for the serious scientist. Specialists in machine building and metallurgy, as well as graduate students and researchers will be the book's audience. Annotation :2004 Book News, Inc., Portland, OR (booknews.com).
Download or read book Ultrafine Grained Materials written by Ruslan Z. Valiev and published by Springer Nature. This book was released on with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Superplasticity in Advanced Materials written by José María Cabrera Marrero and published by Materials Research Forum LLC. This book was released on 2023-09-01 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents practical and theoretical works on superplasticity in metals and ceramics, on deformation mechanisms, on processes to obtain large ultrafine-grained structures, on advanced characterization techniques, and on hot deformation of advanced materials. Key papers focus on (1) processing of metallic alloys for achieving exceptional superplastic properties, (2) high-pressure sliding (HPS) processes, (3) in-situ neutron and synchrotron methods, and (4) ultra-severe plastic deformation. Keywords: Superplasticity, Superfunctionality, High-pressure Sliding, High-pressure Torsion, Precise Forming, Numerical Simulation, Aeronautical Parts, Near-unconstrained Superplastic Parts, Low-temperature Superplasticity, Friction Stir Processing, Microstructure Evolution, Corrosion Properties, Duplex Stainless Steel, Grain Boundary Sliding, Laminated Materials, Asymmetric Hot Rolling, Uniaxial Hot Pressing, Diffusion Bonding.
Download or read book Ultrafine Grained Materials II written by Minerals Metals and Materials Society and published by . This book was released on 2013-09-27 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of a symposium sponsored by the Shaping and Forming Committee of the Materials Processing and Manufacturing Division (MPMD) and the Mechanical Behavior Committee (Jt. SMD/ASM-MSCTS) of the Structural Materials Division (SMD) of TMS (The Minerals, Metals & Materials Society) and held during the 2002 TMS Annual Meeting in Seattle, Washington February 17-21,2002.
Download or read book Superplasticity in Metals and Ceramics written by T. G. Nieh and published by Cambridge University Press. This book was released on 1997-01-23 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes advances in the field of superplasticity, the ability of certain materials to undergo very large tensile strains. This phenomenon has increasing commercial applications, but also presents a fascinating scientific challenge in attempts to understand the physical mechanisms that underpin it. The authors emphasize the materials aspects of superplasticity. Beginning with a brief history of the phenomenon, they describe the two major types of superplasticity-- fine-structure and internal-stress superplasticity-- and discuss their operative mechanisms. They also present microstructural factors controlling the ductility and fracture in superplastic materials. Observations of superplasticity in metals (including aluminum, magnesium, iron, titanium and nickel), ceramics (including monoliths and composites), intermetallics (including iron, nickel, and titanium base), and laminates are thoroughly described. This is a valuable text for graduate students and researchers in materials science and engineering.
Download or read book Superplasticity in Advanced Materials ICSAM 2015 written by Eiichi Sato and published by Trans Tech Publications Ltd. This book was released on 2016-01-08 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of Selected, Peer Reviewed Papers from the 12th International Conference on Superplasticity in Advanced Materials (ICSAM 2015), September 7-11, 2015, Tokyo, Japan. The 99 papers are grouped as follows: Chapter 1: Keynote Lecture Chapter 2: Mechanism of Superplasticity Chapter 3: Superplastic Materials Chapter 4: Microstructure Refinement Chapter 5: Industrial Application
Download or read book Superplastic Forming of Advanced Metallic Materials written by G Giuliano and published by Elsevier. This book was released on 2011-06-27 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultra fine-grained metals can show exceptional ductility, known as superplasticity, during sheet forming. The higher ductility of superplastic metals makes it possible to form large and complex components in a single operation without joints or rivets. The result is less waste, lower weight and manufacturing costs, high precision and lack of residual stress associated with welding which makes components ideal for aerospace, automotive and other applications. Superplastic forming of advanced metallic materials summarises key recent research on this important process.Part one reviews types of superplastic metals, standards for superplastic forming, processes and equipment. Part two discusses ways of modelling superplastic forming processes whilst the final part of the book considers applications, including superplastic forming of titanium, aluminium and magnesium alloys.With its distinguished editor and international team of contributors, Superplastic forming of advanced metallic materials is a valuable reference for metallurgists and engineers in such sectors as aerospace and automotive engineering.Note: The Publishers wish to point out an error in the authorship of Chapter 3 which was originally listed as: G. Bernhart, Clément Ader Institute, France. The correct authorship is: G Bernhart, P. Lours, T. Cutard, V. Velay, Ecole des Mines Albi, France and F. Nazaret, Aurock, France. The Publishers apologise to the authors for this error. - Reviews types of superplastic metals and standards for superplastic forming - Discusses the modelling of superplastic forming, including mathematical and finite element modelling - Examines various applications, including superplastic forming of titanium, aluminiun and magnesium alloys
Download or read book Superplasticity written by K. A. Padmanabhan and published by Springer. This book was released on 2018-12-08 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book combines the perspectives of materials science of Superplasticity, on the one hand, and those of design and mechanics, on the other, in order to provide a holistic view of materials, design, mechanics and performance which will lead to useful solutions of societal benefits, in addition to providing great intellectual challenges. After considering the experimental evidence for superplasticity in different classes of materials, the book discusses the physics-based models, along with their advantages and limitations. Then, the analyses for superplastic forming available in the framework of continuum mechanics, finite element analysis and numerical simulations are presented. Finally, the authors highlight some successful industrial applications. This book is recommended as a text book for courses on Superplasticity and as supplementary use for courses on Materials Processing, Manufacturing, High Temperature Deformation, Nanotechnology and Mechanical Behavior of Materials. Persons working in Department of Materials Science and Engineering, Physics, Mechanics, Mechanical Engineering, Aerospace Engineering, Metallurgy, Ceramics and Geo-sciences are likely to find the book to be useful. It is also recommended as a reference source for practicing engineers involved in the design, processing and manufacture of industrial components, which exploit the unique properties associated with superplastic materials.
Download or read book Fundamentals of Creep in Metals and Alloys written by Michael E. Kassner and published by Elsevier. This book was released on 2004-04-06 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials * Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures * Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussionUnderstanding the strength of materials at a range of temperatures is critically important to a huge number of researchers and practitioners from a wide range of fields and industry sectors including metallurgists, industrial designers, aerospace R&D personnel, and structural engineers. The most up-to date and comprehensive book in the field, Fundamentals of Creep in Metals and Alloys discusses the fundamentals of time-dependent plasticity or creep plasticity in metals, alloys and metallic compounds. This is the first book of its kind that provides broad coverage of a range of materials not just a sub-group such as metallic compounds, superalloys or crystals. As such it presents the most balanced view of creep for all materials scientists. The theory of all of these phenomena are extensively reviewed and analysed in view of an extensive bibliography that includes the most recent publications in the field. All sections of the book have undergone extensive peer review and therefore the reader can be sure they have access to the most up-to-date research, fully interrogated, from the world's leading investigators.· Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials· Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures· Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussion
Download or read book Fatigue and Fracture of Nanostructured Materials written by Pasquale Cavaliere and published by Springer Nature. This book was released on 2020-10-27 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the main approaches for production and synthesis of nanostructured metals and alloys, taking into account the fatigue behavior of materials in additive manufactured components. Depending on the material type, form, and application, a deep discussion of fatigue properties and crack behavior is also provided. Pure nanostructured metals, complex alloys and composites are further considered. Prof. Cavaliere’s examination is supported by the most up-to-date understanding from the scientific literature along with a thorough presentation of theory. Bringing together the widest range of perspective on its topic, the book is ideal for materials researchers, professional engineers in industry, and students interested in nanostructured materials, fracture/fatigue mechanics, and additive manufacturing. Describes in detail the relevance of nanostructures in additive manufacturing technologies; Includes sufficient breadth and depth on theoretical modelling of fatigue and crack behavior for use in the classroom; Identifies many open questions regarding different theories through experimental finding; Contextualizes the latest scientific results for readers in industry.
Download or read book Aluminium Alloys and Composites written by Kavian Cooke and published by BoD – Books on Demand. This book was released on 2020-03-04 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminium (Al) is a metal of great importance because of its excellent corrosion resistance, high electrical and thermal conductivity, good reflectivity, and very good recycling characteristics. The properties of heat-treatable Al-alloys can be further enhanced by the inclusion of a reinforcing phase that increases the mechanical properties of the overall composite. This book is a comprehensive guide on the different types of aluminum alloys and the new advances that have been made in developing and manufacturing aluminum alloys and composites. This text provides a comprehensive overview of the processing, formability, and chemical composition of aluminum alloys and composites. Part One is focused on evaluating the types and properties of advanced aluminum alloys and composites, while Part Two explores characterization. The advantage of this book is that it provides a detailed review of major advances that have occurred in the development and application of aluminum alloys and composites while outlining a development strategy for these materials.
Download or read book Superplasticity in Advanced Materials ICSAM 94 written by Terence Langdon and published by Trans Tech Publications Ltd. This book was released on 1994-10-14 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: While the superplastic phenomenon was first demonstrated in scientific experiments conducted in the United Kingdom, much of the early systematic work in this area was performed in Russia. This volume covers the recent developments concerning superplastictity phenomena in many materials classes of current interest.
