Download or read book Superplastic Forming Characteristics of 2090 OE 16 and 8090 SP Al Li Alloys written by Razaq H. Khazi-Syed and published by . This book was released on 1992 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effect of Thermal Processing Practices on the Properties of Superplastic Al Li Alloys written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-06 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effect of thermal processing on the mechanical properties of superplastically formed structural components fabricated from three aluminum-lithium alloys was evaluated. The starting materials consisted of 8090, 2090, and X2095 (Weldalite(TM) 049), in the form of commercial-grade superplastic sheet. The experimental test matrix was designed to assess the impact on mechanical properties of eliminating solution heat treatment and/or cold water quenching from post-forming thermal processing. The extensive hardness and tensile property data compiled are presented as a function of aging temperature, superplastic strain and temper/quench rate for each alloy. The tensile properties of the materials following superplastic forming in two T5-type tempers are compared with the baseline T6 temper. The implications for simplifying thermal processing without degradation in properties are discussed on the basis of the results. Hales, Stephen J. and Lippard, Henry E. Unspecified Center...
Download or read book Superplastic Behavior of Al Li 2090 OE 16 ALCOA written by Lambros Stamatiou Douskos and published by . This book was released on 1991 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Superplastic Forming of Aluminum Lithium 2090 Alloy written by Rocky Wong and published by . This book was released on 1994 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1991 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effects of Alloy Chemistry on Superplastic Forming of Rapid Solidification Processed Aluminum Lithium Alloys written by RJ. Lederich and published by . This book was released on 1986 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: The superplastic forming characteristics of rapid-solidification-processed (RSP) Al-3Li-based alloys containing varying amounts of copper, magnesium, cobalt, and zirconium and processed by different thermomechanical sequences were investigated. Their final microstructures were strongly dependent on the processing treatment and alloy composition. All the zirconium-containing alloys were processed to have a fine subgrain microstructure. These alloys deform predominantly by dislocation glide and climb processes and by subgrain boundary motion, and they exhibit up to 400% elongation, which is sufficient for many commercial forming applications. Cavitation was suppressed, and the mechanical properties were not affected by forming. A thermomechanical processing sequence was established that develops a completely recrystallized fine grain microstructure in the Al-Li-Cu-Zr alloys. The alloys with this recrystallized microstructure have excellent formability.
Download or read book Effect of Thermal Processing Practices on the Properties of Superplastic Al Li Alloys written by Stephen J. Hales and published by . This book was released on 1993 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metals Abstracts written by and published by . This book was released on 1994 with total page 1440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA SP written by and published by . This book was released on 1992 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1993 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aluminum Lithium Alloys written by N Eswara Prasad and published by Butterworth-Heinemann. This book was released on 2013-09-20 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because lithium is the least dense elemental metal, materials scientists and engineers have been working for decades to develop a commercially viable aluminum-lithium (Al-Li) alloy that would be even lighter and stiffer than other aluminum alloys. The first two generations of Al-Li alloys tended to suffer from several problems, including poor ductility and fracture toughness; unreliable properties, fatigue and fracture resistance; and unreliable corrosion resistance. Now, new third generation Al-Li alloys with significantly reduced lithium content and other improvements are promising a revival for Al-Li applications in modern aircraft and aerospace vehicles. Over the last few years, these newer Al-Li alloys have attracted increasing global interest for widespread applications in the aerospace industry largely because of soaring fuel costs and the development of a new generation of civil and military aircraft. This contributed book, featuring many of the top researchers in the field, is the first up-to-date international reference for Al-Li material research, alloy development, structural design and aerospace systems engineering. - Provides a complete treatment of the new generation of low-density AL-Li alloys, including microstructure, mechanical behavoir, processing and applications - Covers the history of earlier generation AL-Li alloys, their basic problems, why they were never widely used, and why the new third generation Al-Li alloys could eventually replace not only traditional aluminum alloys but more expensive composite materials - Contains two full chapters devoted to applications in the aircraft and aerospace fields, where the lighter, stronger Al-Li alloys mean better performing, more fuel-efficient aircraft
Download or read book Metals Abstracts Index written by and published by . This book was released on 1995 with total page 1390 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Superplasticity written by K. A. Padmanabhan and published by Springer. This book was released on 2018-12-08 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book combines the perspectives of materials science of Superplasticity, on the one hand, and those of design and mechanics, on the other, in order to provide a holistic view of materials, design, mechanics and performance which will lead to useful solutions of societal benefits, in addition to providing great intellectual challenges. After considering the experimental evidence for superplasticity in different classes of materials, the book discusses the physics-based models, along with their advantages and limitations. Then, the analyses for superplastic forming available in the framework of continuum mechanics, finite element analysis and numerical simulations are presented. Finally, the authors highlight some successful industrial applications. This book is recommended as a text book for courses on Superplasticity and as supplementary use for courses on Materials Processing, Manufacturing, High Temperature Deformation, Nanotechnology and Mechanical Behavior of Materials. Persons working in Department of Materials Science and Engineering, Physics, Mechanics, Mechanical Engineering, Aerospace Engineering, Metallurgy, Ceramics and Geo-sciences are likely to find the book to be useful. It is also recommended as a reference source for practicing engineers involved in the design, processing and manufacture of industrial components, which exploit the unique properties associated with superplastic materials.
Download or read book Aeronautical Engineering written by and published by . This book was released on 1992 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: A selection of annotated references to unclassified reports and journal articles that were introduced into the NASA scientific and technical information system and announced in Scientific and technical aerospace reports (STAR) and International aerospace abstracts (IAA).
Download or read book Materials and Processes written by Barrie D. Dunn and published by Springer. This book was released on 2015-12-29 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to assist scientists and engineers select the ideal material or manufacturing process for particular applications; these could cover a wide range of fields, from light-weight structures to electronic hardware. The book will help in problem solving as it also presents more than 100 case studies and failure investigations from the space sector that can, by analogy, be applied to other industries. Difficult-to-find material data is included for reference. The sciences of metallic (primarily) and organic materials presented throughout the book demonstrate how they can be applied as an integral part of spacecraft product assurance schemes, which involve quality, material and processes evaluations, and the selection of mechanical and component parts. In this successor edition, which has been revised and updated, engineering problems associated with critical spacecraft hardware and the space environment are highlighted by over 500 illustrations including micrographs and fractographs. Space hardware captured by astronauts and returned to Earth from long durations in space are examined. Information detailed in the Handbook is applicable to general terrestrial applications including consumer electronics as well as high reliability systems associated with aeronautics, medical equipment and ground transportation. This Handbook is also directed to those involved in maximizing the relia bility of new materials and processes for space technology and space engineering. It will be invaluable to engineers concerned with the construction of advanced structures or mechanical and electronic sub-systems.
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1990-06 with total page 1178 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aerospace Materials and Material Technologies written by N. Eswara Prasad and published by Springer. This book was released on 2016-11-07 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves as a comprehensive resource on various traditional, advanced and futuristic material technologies for aerospace applications encompassing nearly 20 major areas. Each of the chapters addresses scientific principles behind processing and production, production details, equipment and facilities for industrial production, and finally aerospace application areas of these material technologies. The chapters are authored by pioneers of industrial aerospace material technologies. This book has a well-planned layout in 4 parts. The first part deals with primary metal and material processing, including nano manufacturing. The second part deals with materials characterization and testing methodologies and technologies. The third part addresses structural design. Finally, several advanced material technologies are covered in the fourth part. Some key advanced topics such as “Structural Design by ASIP”, “Damage Mechanics-Based Life Prediction and Extension” and “Principles of Structural Health Monitoring” are dealt with at equal length as the traditional aerospace materials technology topics. This book will be useful to students, researchers and professionals working in the domain of aerospace materials.
