Download or read book Superplastic Deformation Properties in a Two Phase Titanium Alloy written by Martin Tuffs and published by . This book was released on 1995 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Titanium Alloys written by Maciej Motyka and published by BoD – Books on Demand. This book was released on 2019-11-27 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium alloys, due to unique physical and chemical properties (mainly high relative strength combined with very good corrosion resistance), are considered as an important structural metallic material used in hi-tech industries (e.g. aerospace, space technology). This book provides information on new manufacturing and processing methods of single- and two-phase titanium alloys. The eight chapters of this book are distributed over four sections. The first section (Introduction) indicates the main factors determining application areas of titanium and its alloys. The second section (Manufacturing, two chapters) concerns modern production methods for titanium and its alloys. The third section (Thermomechanical and surface treatment, three chapters) covers problems of thermomechanical processing and surface treatment used for single- and two-phase titanium alloys. The fourth section (Machining, two chapters) describes the recent results of high speed machining of Ti-6Al-4V alloy and the possibility of application of sustainable machining for titanium alloys.
Download or read book Superplasticity of Alloys Intermetallides and Ceramics written by Oscar A. Kaibyshev and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superplasticity is shown to be a universal phenomenon in materials ranging from metals and intermetallics to ceramics. Superplastic deformation facilitates the production of materials with specifically chosen properties. This is illustrated using the examples of Mg-, Al-, and Ti-based commercial alloys, steels, and superalloys. Some of the strenghts of this book are: the broad range of materials studied, the reduction of scientific results to a form suitable for the practitioner, a profound physical analysis of the phenomenon, a new approach to superplastic treatment as a kind of strain-heat treatment, the presentation of new data on superplastic flow and on production techniques of micro- and submicrocrystalline structures.
Download or read book Superplasticity and Post deformation Properties in Titanium Alloys written by Mohamad Agha Hassan and published by . This book was released on 1991 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Titanium Alloys written by A.K.M. Nurul Amin and published by BoD – Books on Demand. This book was released on 2012-03-16 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first section of the book includes the following topics: fusion-based additive manufacturing (AM) processes of titanium alloys and their numerical modelling, mechanism of ?-case formation mechanism during investment casting of titanium, genesis of gas-containing defects in cast titanium products. Second section includes topics on behavior of the (? + ?) titanium alloys under extreme pressure and temperature conditions, hot and super plasticity of titanium (? + ?) alloys and some machinability aspects of titanium alloys in drilling. Finally, the third section includes topics on different surface treatment methods including nanotube-anodic layer formation on two phase titanium alloys in phosphoric acid for biomedical applications, chemico-thermal treatment of titanium alloys applying nitriding process for improving corrosion resistance of titanium alloys.
Download or read book Titanium Alloys written by W Sha and published by Elsevier. This book was released on 2009-04-29 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given their growing importance in the aerospace, automotive, sports and medical sectors, modelling the microstructure and properties of titanium and its alloys is a vital part of research into the development of new applications. This is the first time a book has been dedicated to modelling techniques for titanium.Part one discusses experimental techniques such as microscopy, synchrotron radiation X-ray diffraction and differential scanning calorimetry. Part two reviews physical modelling methods including thermodynamic modelling, the Johnson-Mehl-Avrami method, finite element modelling, the phase-field method, the cellular automata method, crystallographic and fracture behaviour of titanium aluminide and atomistic simulations of interfaces and dislocations relevant to TiAl. Part three covers neural network models and Part four examines surface engineering products. These include surface nitriding: phase composition, microstructure, mechanical properties, morphology and corrosion; nitriding: modelling of hardness profiles and kinetics; and aluminising: fabrication of Ti coatings by mechanical alloying.With its distinguished authors, Titanium alloys: Modelling of microstructure, properties and applications is a standard reference for industry and researchers concerned with titanium modelling, as well as users of titanium, titanium alloys and titanium aluminide in the aerospace, automotive, sports and medical implant sectors. - Comprehensively assesses modelling techniques for titanium, including experimental techniques such as microscopy and differential scanning calorimetry - Reviews physical modelling methods including thermodynamic modelling and finite element modelling - Examines surface engineering products with specific chapters focused on surface nitriding and aluminising
Download or read book Superplastic Forming Diffusion Bonding Technology of Titanium Alloys written by Zhiqiang Li and published by Springer Nature. This book was released on 2023-10-26 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive illustration to the superplastic forming/diffusion bonding (SPF/DB) technology developed over decades of research on titanium alloys, process modeling, and its application. SPF/DB technology plays key roles in building aviation components with complicated structures, with highly beneficial effects when well designed. With the ever-increasing demand on components with multiple layers, there is an urgent need for an updated assessment of traditional and modern SPF/DB processing methods. Success critically depends on making the most practical and effective choice of SPF/DB method for a given application. The book introduces titanium and titanium alloys, SPF/DB processing and its modeling, and applications for building typical single or multiple layer(s) structures. Particular attention is paid to illustrating the microstructure evolution during SPF/DB processes. The information for making technical decisions about optimal choice of measurement and evaluation methods is also given in the book. Each chapter follows a focused and pragmatic format. Fully illustrated throughout, the book presents the state of the art in SPF/DB technology in a manner that makes it useful for engineers to improve the established forming processes and quality of components. This book is an essential reading material for industrial practitioners, academic researchers and postgraduates.
Download or read book Titanium Alloys written by Jan Sieniawski and published by BoD – Books on Demand. This book was released on 2013-05-15 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains six chapters and covers topics dealing with biomedical applications of titanium alloys, surface treatment, relationships between microstructure and mechanical and technological properties, and the effect of radiation on the structure of the titanium alloys.
Download or read book Superplastic Deformation Behaviour of Two Duplex Titanium Alloys written by Michael Thomas Cope and published by . This book was released on 1982 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Titanium and Titanium Alloys written by Christoph Leyens and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an excellent reference for materials scientists and engineers needing to gain more knowledge about these engineering materials. Following introductory chapters on the fundamental materials properties of titanium, readers will find comprehensive descriptions of the development, processing and properties of modern titanium alloys. There then follows detailed discussion of the applications of titanium and its alloys in aerospace, medicine, energy and automotive technology.
Download or read book Characterization of the Superplastic Behavior of the Two Phase Ti 6A1 4V Alloy written by Michael Lloyd Meier and published by . This book was released on 1986 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Titanium Physical Metallurgy Processing and Applications written by F.H. Froes and published by ASM International. This book was released on 2015-02-01 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new book covers all aspects of the history, physical metallurgy, corrosion behavior, cost factors and current and potential uses of titanium. The history of titanium is traced from its early beginnings through the work of Kroll, to the present day broadening market place. Extensive detail on extraction processes is discussed, as well as the various beta to alpha transformations and details of the powder metallurgy techniques.
Download or read book Recrystallization and Related Annealing Phenomena written by F.J. Humphreys and published by Elsevier. This book was released on 2012-12-02 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: The annealing of deformed materials is of both technological importance and scientific interest. The phenomena have been most widely studied in metals, although they occur in all crystalline materials such as the natural deformation of rocks and the processing of technical ceramics. Research is mainly driven by the requirements of industry, and where appropriate, the book discusses the extent to which we are able to formulate quantitative, physically-based models which can be applied to metal-forming processes.The subjects treated in this book are all active research areas, and form a major part of at least four regular international conference series. However, there have only been two monographs published in recent times on the subject of recrystallization, the latest nearly 20 years ago. Since that time, considerable advances have been made, both in our understanding of the subject and in the techniques available to the researcher.The book covers recovery, recrystallization and grain growth in depth including specific chapters on ordered materials, two-phase alloys, annealing textures and annealing during and after hot working. Also contained are treatments of the deformed state and the structure and mobility of grain boundaries, technologically important examples and a chapter on computer simulation and modelling. The book provides a scientific treatment of the subject for researchers or students in Materials Science, Metallurgy and related disciplines, who require a more detailed coverage than is found in textbooks on physical metallurgy, and a more coherent treatment than will be found in the many conference proceedings and review articles.
Download or read book Hot Deformation and Processing of Aluminum Alloys written by Hugh J. McQueen and published by CRC Press. This book was released on 2016-04-19 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatise on the hot working of aluminum and its alloys, Hot Deformation and Processing of Aluminum Alloys details the possible microstructural developments that can occur with hot deformation of various alloys, as well as the kind of mechanical properties that can be anticipated. The authors take great care to explain and differenti
Download or read book Superplasticity in Metals and Ceramics written by T. G. Nieh and published by Cambridge University Press. This book was released on 1997-01-23 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes advances in the field of superplasticity, the ability of certain materials to undergo very large tensile strains. This phenomenon has increasing commercial applications, but also presents a fascinating scientific challenge in attempts to understand the physical mechanisms that underpin it. The authors emphasize the materials aspects of superplasticity. Beginning with a brief history of the phenomenon, they describe the two major types of superplasticity-- fine-structure and internal-stress superplasticity-- and discuss their operative mechanisms. They also present microstructural factors controlling the ductility and fracture in superplastic materials. Observations of superplasticity in metals (including aluminum, magnesium, iron, titanium and nickel), ceramics (including monoliths and composites), intermetallics (including iron, nickel, and titanium base), and laminates are thoroughly described. This is a valuable text for graduate students and researchers in materials science and engineering.
Download or read book Fundamentals of Creep in Metals and Alloys written by Michael E. Kassner and published by Elsevier. This book was released on 2004-04-06 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials * Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures * Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussionUnderstanding the strength of materials at a range of temperatures is critically important to a huge number of researchers and practitioners from a wide range of fields and industry sectors including metallurgists, industrial designers, aerospace R&D personnel, and structural engineers. The most up-to date and comprehensive book in the field, Fundamentals of Creep in Metals and Alloys discusses the fundamentals of time-dependent plasticity or creep plasticity in metals, alloys and metallic compounds. This is the first book of its kind that provides broad coverage of a range of materials not just a sub-group such as metallic compounds, superalloys or crystals. As such it presents the most balanced view of creep for all materials scientists. The theory of all of these phenomena are extensively reviewed and analysed in view of an extensive bibliography that includes the most recent publications in the field. All sections of the book have undergone extensive peer review and therefore the reader can be sure they have access to the most up-to-date research, fully interrogated, from the world's leading investigators.· Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials· Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures· Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussion
Download or read book Superplasticity written by K. A. Padmanabhan and published by Springer. This book was released on 2018-12-08 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book combines the perspectives of materials science of Superplasticity, on the one hand, and those of design and mechanics, on the other, in order to provide a holistic view of materials, design, mechanics and performance which will lead to useful solutions of societal benefits, in addition to providing great intellectual challenges. After considering the experimental evidence for superplasticity in different classes of materials, the book discusses the physics-based models, along with their advantages and limitations. Then, the analyses for superplastic forming available in the framework of continuum mechanics, finite element analysis and numerical simulations are presented. Finally, the authors highlight some successful industrial applications. This book is recommended as a text book for courses on Superplasticity and as supplementary use for courses on Materials Processing, Manufacturing, High Temperature Deformation, Nanotechnology and Mechanical Behavior of Materials. Persons working in Department of Materials Science and Engineering, Physics, Mechanics, Mechanical Engineering, Aerospace Engineering, Metallurgy, Ceramics and Geo-sciences are likely to find the book to be useful. It is also recommended as a reference source for practicing engineers involved in the design, processing and manufacture of industrial components, which exploit the unique properties associated with superplastic materials.
