Download or read book Supercooled Liquid Bulk Glassy and Nanocrystalline States of Alloys written by Akihisa Inoue and published by Cambridge University Press. This book was released on 2014-06-05 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since nanocrystallites are often formed as a product of devitrification of metallic glasses, and supercooled liquid plays an essential role in bulk glass formation, recent research pertaining to these three states of alloys were brought together for discussion into a single MRS symposium. Bulk glassy and bulk nanocrystalline alloys are important because they demonstrate exclusively good static and dynamic mechanical properties, magnetic properties, and good corrosion and wear resistance. Some of these alloys also exhibit superplasticity, including high-strain-rate flowability. The reports in this book span formation and processing methods of bulk glassy, nanocrystalline alloys; glass- forming ability and thermal stability; devitrification and phase transformations; properties; general physical, mechanical, magnetic, electrical, and corrosion resistance; structure of bulk glasses; supercooled liquid and nanomaterials; and diffusion. Topics include: atomic and electronic structure; glass-forming ability and thermal stability; crystallization and decomposition; quasicrystals; soft magnetic properties; hard magnetism and mechanical and other properties.
Download or read book Supercooled Liquids Glass Transition and Bulk Metallic Glasses Volume 754 written by Takeshi Egami and published by . This book was released on 2003-07-16 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: There has been a renaissance in glass science brought about by the development of concepts such as fragility index and the energy landscape with megabasins. Research on bulk metallic glasses has been explosive since their advent when MRS offered its first book on the topic. In 2000, a second book broadened the scope to include supercooled liquid, bulk glassy and nanocrystalline states. This book enhances the scope to include glass transition in diverse materials such as water, silicate and polymeric melts. Bringing these threads together in an interdisciplinary manner was fruitful and offers proof that while there is much common ground, gaps between various approaches to the glassy state remain to be bridged. Subjects include: the supercooled liquid; glass formability; structural relaxation and dynamics; structure determination and modeling; processing and applications of bulk metallic glasses; mechanical properties; mechanical properties - composites; crystallization; electronic and magnetic structure and properties; and nanoparticles and nonmetallic glasses.
Download or read book Supercooled Liquid Bulk Glassy and Nanocrystalline States of Alloys Volume 644 written by Akihisa Inoue and published by . This book was released on 2001-10-05 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MRS Symposium Proceeding series is an internationally recognised reference suitable for researchers and practitioners.
Download or read book Bulk Metallic Glasses written by C. Suryanarayana and published by CRC Press. This book was released on 2017-11-22 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the fast pace of research in the field, the Second Edition of Bulk Metallic Glasses has been thoroughly updated and remains essential reading on the subject. It incorporates major advances in glass forming ability, corrosion behavior, and mechanical properties. Several of the newly proposed criteria to predict the glass-forming ability of alloys have been discussed. All other areas covered in this book have been updated, with special emphasis on topics where significant advances have occurred. These include processing of hierarchical surface structures and synthesis of nanophase composites using the chemical behavior of bulk metallic glasses and the development of novel bulk metallic glasses with high-strength and high-ductility and superelastic behavior. New topics such as high-entropy bulk metallic glasses, nanoporous alloys, novel nanocrystalline alloys, and soft magnetic glassy alloys with high saturation magnetization have also been discussed. Novel applications, such as metallic glassy screw bolts, surface coatings, hyperthermia glasses, ultra-thin mirrors and pressure sensors, mobile phone casing, and degradable biomedical materials, are described. Authored by the world’s foremost experts on bulk metallic glasses, this new edition endures as an indispensable reference and continues to be a one-stop resource on all aspects of bulk metallic glasses.
Download or read book Amorphous and Nanocrystalline Materials written by A. Inoue and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Amorphous and nanocrystalline materials are a class of their own. Their properties are quite different to those of the corresponding crystalline materials. This book gives systematic insight into their physical properties, structure, behaviour, and design for special advanced applications.
Download or read book Bulk Metallic Glasses written by C. Suryanarayana and published by CRC Press. This book was released on 2011-06-03 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: In spite of the large amount of research activity in this subfield of materials science and engineering, there is no single book available that provides background information, methods of synthesis, characterization procedures, properties, and potential and existing applications.of bulk metallic glasses. Written in an easy-to-understand style by pioneering researchers in this field, Bulk Metallic Glasses is one of the first books to coherently discuss the synthesis, processing, properties, and applications of these unique materials. The book explores the differences between nanocrystalline, glassy, and amorphous solids as well as the thermodynamics and kinetics and various processing methods of glass formation. It critically compares the different criteria for glass formation, describes the advantages and limitations of experimental methods for synthesizing bulk metallic glasses in assorted sizes and shapes, and examines the kinetics of crystallization/devitrification and the mechanisms of transformations. It also covers the density, diffusivity, thermal expansion, electrical resistivity, specific heat, viscosity, corrosion resistance, mechanical behavior, and magnetic properties of bulk metallic glasses. After presenting a wide array of applications, the book concludes with a discussion on the future of these materials. The adoption of bulk metallic glasses into existing systems is besieged by many obstacles but due to their interesting combination of properties, future applications may be unlimited. A one-stop resource on all aspects of bulk metallic glasses, this book demonstrates the immense potential of these novel materials. It clearly elucidates the background, detailed methods of synthesis and characterization, structure, and properties of bulk metallic glasses.
Download or read book Plasticity in the Supercooled Liquid Region of Bulk Metallic Glasses written by and published by . This book was released on 2000 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intensive efforts have been carried out over the past decade to develop means to slow down the phase transformation kinetics during the forming of metallic glasses. As a result of these efforts, some metallic glasses can now be fabricated in bulk forms (BMG) from the liquid state at cooling rates on the order of 1-10 K/s, which is close to that of conventional casting. This enables the production of bulk amorphous alloys with a thickness of (almost equal to)10 mm. While advances in amorphous metallic alloy development have been impressive, they have been made largely through experience [1]. Three main conclusions drawn from this study are: (1) Bulk metallic glasses generally have excellent mechanical formability in the supercooled liquid region. (2) Bulk metallic glasses may not be necessarily behave like a Newtonian fluid (i.e. m=1). The non-Newtonian behavior is associated with glass instability during deformation. (3) Multi-component Bulk metallic glasses can be used as the precursor of a nanocrystalline solid. However, the nanocrystalline solid is not necessarily superplastic. The non-superplastic behavior is caused by the difficult strain accommodation at grain triple junctions.
Download or read book Mechanical Alloying And Milling written by Cury Suryanarayana and published by CRC Press. This book was released on 2004-09-28 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book surveys the broad field of mechanical alloying from a scientific and technological perspective to form a timely and comprehensive resource valuable to both students and researchers. The treatment progresses from the historical background through a description of the process, the different metastable effects produced, and the mechanisms of
Download or read book Bulk Amorphous Alloys Preparation and Fundamental Characteristics written by A. Inoue and published by Trans Tech Publications Ltd. This book was released on 1998-10-19 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in bulk amorphous alloys has increased rapidly throughout the world and these materials have now gained a position of great importance in basic science and engineering materials technology. Bulk amorphous alloys based upon the Zr-Al-Ni-Cu, Zr-(Ti,Nb)-Al-Ni-Cu and Zr-Ti-Ni-Cu-Be systems have already achieved wide commercial success as components of various tehnical accessories ranging from sporting goods to optical instruments. Here is a state-of-the art review on this new group of materials, covering all areas of interest, ranging from the synthesis of these special alloys and their fundamental properties, to their engineering characteristics and applications. This work will therefore be of equal interest to those who wish to become fully acquainted with the subject, and to those who are already actively engaged in the field.
Download or read book 3 written by David J. Sellmyer and published by 清华大学出版社有限公司. This book was released on 2005 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: 本书共分四卷,每一卷集中论述一个具体的研究领域。每一章首先对该章的基本概念和重要观念进行阐述,然后从实验和理论方面进行详细说明,最后介绍该领域的发展前景以及新的思想。本卷对近年来各种磁性材料的制作加工原理和性能的相关性进行分析总结并瞻望未来。
Download or read book Quasicrystals written by Hans-Rainer Trebin and published by John Wiley & Sons. This book was released on 2003-07-07 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and up-to-date review, covering the broad range of this outstanding class of materials among intermetallic alloys. Starting with metallurgy and characterization, the authors continue on to structure and mathematical modeling. They use this basis to move on to dealing with electronic, magnetic, thermal, dynamic and mechanical properties, before finally providing an insight into surfaces and thin films. The authors belong to a research program on quasicrystals, sponsored by the German Research Society and managed by Hans-Rainer Trebin, such that most of the latest results are pre.
Download or read book Nanostructured Metals and Alloys written by S H Whang and published by Elsevier. This book was released on 2011-03-22 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tensile strength, fatigue strength and ductility are important properties of nanostructured metallic materials, which make them suitable for use in applications where strength or strength-to-weight ratios are important. Nanostructured metals and alloys reviews the latest technologies used for production of these materials, as well as recent advances in research into their structure and mechanical properties. One of the most important issues facing nanostructured metals and alloys is how to produce them. Part one describes the different methods used to process bulk nanostructured metals and alloys, including chapters on severe plastic deformation, mechanical alloying and electrodeposition among others. Part two concentrates on the microstructure and properties of nanostructured metals, with chapters studying deformation structures such as twins, microstructure of ferrous alloys by equal channel angular processing, and characteristic structures of nanostructured metals prepared by plastic deformation. In part three, the mechanical properties of nanostructured metals and alloys are discussed, with chapters on such topics as strengthening mechanisms, nanostructured metals based on molecular dynamics computer simulations, and surface deformation. Part four focuses on existing and developing applications of nanostructured metals and alloys, covering topics such as nanostructured steel for automotives, steel sheet and nanostructured coatings by spraying. With its distinguished editor and international team of contributors, Nanostructured metals and alloys is a standard reference for manufacturers of metal components, as well as those with an academic research interest in metals and materials with enhanced properties.
Download or read book Metastable Mechanically Alloyed and Nanocrystalline Materials written by A. Calka and published by Trans Tech Publications. This book was released on 1999 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metastable and Nanocrystalline Materials offer enormous technological potential and, for this reason, they are the subject of intense world-wide research.
Download or read book Metallic Glasses and Their Composites written by D.V. Louzguine and published by Materials Research Forum LLC. This book was released on 2021-01-05 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallic glasses and their crystal/glass composites find ever more applications in such fields as mini transformers, microelectromechanical devices, pressure sensors, precision surgical instruments, biological implants and sportive goods (springs, diaphragms, membranes, knife blades, electromagnetic wave shields, optical mirrors, power inductors, Coriolis flow meters, etc.). The book reviews recent research and suggests future developments, e.g. in the area of dual-phase composite/hybrid materials. Keywords: Metallic Glasses, Crystal/Glass Composites, Dual-phase Composite/Hybrid Materials, Supercooled Liquid, Devitrification, Magnetic Materials, Microelectromechanical Devices, Pressure Sensors, Orthopedic Screws, Precision Instruments, Biological Implants, Electromagnetic Wave Shields, Optical Mirrors, Power Inductors, Coriolis Flow Meters.
Download or read book Spark Plasma Sintering of Materials written by Pasquale Cavaliere and published by Springer. This book was released on 2019-02-18 with total page 781 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes spark plasma sintering (SPS) in depth. It addresses fundamentals and material-specific considerations, techniques, and applications across a broad spectrum of materials. The book highlights methods used to consolidate metallic or ceramic particles in very short times. It highlights the production of complex alloys and metal matrix composites with enhanced mechanical and wear properties. Emphasis is placed on the speed of the sintering processes, uniformity in product microstructure and properties, reduced grain growth, the compaction and sintering of materials in one processing step, various materials processing, and high energy efficiency. Current and potential applications in space science and aeronautics, automation, mechanical engineering, and biomedicine are addressed throughout the book.
Download or read book Bulk Metallic Glasses and Their Composites written by Muhammad Musaddique Ali Rafique and published by Momentum Press. This book was released on 2018-07-31 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive and holistic study of microstrucure evoution during solidification and additive manufacturin.g Bulk metallic glasses and their composites have attracted a lot of attention lately in the scientific community owing to their excellent mechanical properties (combination of hardness, strength, and high elastic strain limit). However, they still lack toughness and tensile ductility and exhibit catastrophic failure upon tension. This can be overcome by various means, of which in situ introduction of ductile crystalline precipitates/phases during solidification proved to be the best. Various studies have been carried out in the last two decades, which explain this phenomenon. However, there is a gap on how this can be achieved in modern additive manufacturing exploiting inherent nature of process. This book aims to bridge this gap. A comprehensive and holistic study is presented, documenting the step-by-step evolution of these materials since their inception till date, explaining the development of toughness in them by modeling and simulation of microstructure evolution during solidification and additive manufacturing.
Download or read book Progress in Metallic Alloys written by Vadim Glebovsky and published by BoD – Books on Demand. This book was released on 2016-10-19 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: In general, metallic alloys are the interdisciplinary subject or even an area that cover physics, chemistry, material science, metallurgy, crystallography, etc. This book is devoted to the metallic alloys. The primary goal is to provide coverage of advanced topics and trends of R
