Download or read book Superconducting Prototype Cavities for the Spallation Neutron Source SNS Project written by and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The Spallation Neutron Source project includes a superconducting linac section in the energy range from 186 MeV to 1000 MeV operating at a frequency of 805 MHz at 2.1 K. For this energy range two types of cavities are needed with geometrical Beta-values of Beta=0.61 and Beta=0.81. An aggressive cavity prototyping program is being pursued at JLab, which calls for fabricating and testing of four Beta=0.61 cavities and two Beta=0.81 cavities. Both types consist of six cells made from high purity niobium and feature one HOM coupler of the TESLA type on each beam pipe and a port for a high power coaxial input coupler. Three of the four Beta=0.61 cavities will be used for a cryomodule test in early 2002. At this time, four medium beta cavities and one high beta cavity have been completed and tested at JLab. In addition, the three medium beta cavities for the prototype cryomodule have been equipped with the integrated Ti-Helium vessel, successfully retested and will be assembled into a cavity string. Results from the cryo-module test should be available by the time of the conference. The tests on the Beta=0.61 cavity and the Beta=0.81 cavity exceeded the design values for gradient and Q - value: E{sub acc} =10.1 MV/m and Q = 5 x 109 at 2.1K for Beta=0.61 and E{sub acc} = 12.3 MV/m and Q=5 x 109 at 2.1K for Beta = 0.81. The medium beta cavities reached gradients between E{sub acc} = 15 MV/m and 21 MV/m. This paper will describe the test results obtained with the various cavities, some aspects of the HOM damping at cryogenic temperatures, results from microphonics and Lorentz force detuning tests and the cavity string assembly at the time of this workshop.
Download or read book RF Superconductivity written by Hasan Padamsee and published by John Wiley & Sons. This book was released on 2009-03-30 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second book to RF Superconducting, written by one of the leading experts. The book provides fast and up-to-date access to the latest advances in the key technology for future accelerators. Experts as well as newcomers to the field will benefit from the discussion of progress in the basic science, technology as well as recent and forthcoming applications. Researchers in accelerator physics will also find much that is relevant to their discipline.
Download or read book The Prototype Fundamental Power Coupler For The Spallation Neutron Source Superconducting Cavities written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Each of the 805 MHz superconducting cavities of the Spallation Neutron Source (SNS) is powered via a coaxial Fundamental Power Coupler (FPC) with a 50 Omega impedance and a warm planar alumina window. The design is derived from the experience of other laboratories; in particular, a number of details are based on the coupler developed for the KEK B-Factory superconducting cavities. However, other design features have been modified to account for the fact that the SNS FPC will transfer a considerably lower average power than the KEK-B coupler. Four prototypes have been manufactured so far, and preliminary tests performed on two of them at Los Alamos National Laboratory (LANL). During these tests, peak powers of over 500 kW were transferred through the couplers in the test stand designed and built for this purpose. This paper gives details of the coupler design and of the results obtained from the RF tests on the test stand during the last few months. A more comprehensive set of tests is planned for the near future.
Download or read book Cryostat Design written by J.G. Weisend II and published by Springer. This book was released on 2016-08-12 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book enables the reader to learn the fundamental and applied aspects of practical cryostat design by examining previous design choices and resulting cryostat performance. Through a series of extended case studies the book presents an overview of existing cryostat design covering a wide range of cryostat types and applications, including the magnet cryostats that comprise the majority of the Large Hadron Collider at CERN, space-borne cryostats containing sensors operating below 1 K, and large cryogenic liquid storage vessels. It starts with an introductory section on the principles of cryostat design including practical data and equations. This section is followed by a series of case studies on existing cryostats, describing the specific requirements of the cryostat, the challenges involved and the design choices made along with the resulting performance of the cryostat. The cryostat examples used in the studies are chosen to cover a broad range of cryostat applications and the authors of each case are leading experts in the field, most of whom participated in the design of the cryostats being described. The concluding chapter offers an overview of lessons learned and summarises some key hints and tips for practical cryostat design. The book will help the reader to expand their knowledge of many disciplines required for good cryostat design, including the cryogenic properties of materials, heat transfer and thermal insulation, instrumentation, safety, structures and seals.
Download or read book Proceedings of the 19th International Cryogenic Enginering Conference ICEC 19 written by Guy Gistau Baguer and published by Alpha Science Int'l Ltd.. This book was released on 2003 with total page 918 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume documents the Proceedings of the Nineteenth International Cryogenic Engineering Conference, Grenoble, France, 2002 Comprising 7 plenary papers and 185 contributed papers and posters dealing with the latest developments in all aspects of Cryogenics. The areas covered include: Large Scale Refrigeration and liquefaction Cryogenic Hydrodynamics Large Cryogenic Systems HTS and LTS Superconductor Applications Cryogen Storage and Distribution Cryogenic Components and Machinery Air and Gas Separation and Purification Cryogenic Instrumentation and Process Control Cryocoolers Cryogenic for Medicine and Biology Superfluid Helium Material and Fluid Properties Aerospace Cryogenics Heat Transfer and Thermal Insulation
Download or read book Design Fabrication and Testing of Superconducting RF Cavities for High Average Beam Currents written by David Joseph Meidlinger and published by . This book was released on 2007 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Small Business Innovation Research Program opening Doors to New Technology written by United States. Congress. House. Committee on Small Business. Subcommittee on Workforce, Empowerment, and Government Programs and published by . This book was released on 2006 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Contamination Issues in Superconducting Cavity Technology written by and published by . This book was released on 1997 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of radio-frequency superconductivity technology in particle accelerator projects has become increasingly evident in recent years. Several large scale projects around the world are either completed or close to completion, such as CEBAF, HERA, TRISTAN and LEP. And superconducting cavity technology is seriously being considered for future applications in linear colliders (TESLA), high current proton accelerators (APT, spallation neutron sources), muon colliders and free electron lasers for industrial application. The reason for this multitude of activities are matured technology based on a better understanding of the phenomena encountered in superconducting cavities and the influence of improved material properties and contamination and quality control measures.
Download or read book The Small Business Innovation Research Programopening doors to new technology written by and published by DIANE Publishing. This book was released on with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reviews Of Accelerator Science And Technology Volume 5 Applications Of Superconducting Technology To Accelerators written by Alexander Wu Chao and published by World Scientific. This book was released on 2013-01-28 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past several decades major advances in accelerators have resulted from breakthroughs in accelerator science and accelerator technology. After the introduction of a new accelerator physics concept or the implementation of a new technology, a leap in accelerator performance followed. A well-known representation of these advances is the Livingston chart, which shows an exponential growth of accelerator performance over the last seven or eight decades. One of the breakthrough accelerator technologies that support this exponential growth is superconducting technology. Recognizing this major technological advance, we dedicate Volume 5 of Reviews of Accelerator Science and Technology (RAST) to superconducting technology and its applications.Two major applications are superconducting magnets (SC magnets) and superconducting radio-frequency (SRF) cavities. SC magnets provide much higher magnetic field than their room-temperature counterparts, thus allowing accelerators to reach higher energies with comparable size as well as much reduced power consumption. SRF technology allows field energy storage for continuous wave applications and energy recovery, in addition to the advantage of tremendous power savings and better particle beam quality. In this volume, we describe both technologies and their applications. We also include discussion of the associated R&D in superconducting materials and the future prospects for these technologies.
Download or read book CERN Courier written by European Organization for Nuclear Research and published by . This book was released on 2001 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This journal is devoted to the latest research on physics, publishing articles on everything from elementary particle behavior to black holes and the history of the universe.
Download or read book Reviews Of Accelerator Science And Technology Volume 10 The Future Of Accelerators written by Chao Alexander Wu and published by World Scientific. This book was released on 2019-09-09 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 10 in the series of the annual journal Reviews of Accelerator Science and Technology (RAST), will be its final volume. Its theme is 'The Future of Accelerators'. This volume, together with previous 9 volumes, gives readers a complete picture as well as detailed technical information about the accelerator field, and its many driving and fascinating aspects.This volume has 17 articles. The first 15 articles have a different approach from the previous volumes. They emphasize the more personal views, perspectives and advice from the frontier researchers rather than provide a review or survey of a specific subfield. This emphasis is more aligned with the theme of the current volume. The other two articles are dedicated respectively to Leon Lederman and Burton Richter, two prominent leaders of our community who left us last year.
Download or read book Reviews Of Accelerator Science And Technology Volume 8 Accelerator Applications In Energy And Security written by Alexander Wu Chao and published by World Scientific. This book was released on 2016-03-04 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: As accelerator science and technology progressed over the past several decades, the accelerators themselves have undergone major improvements in multiple performance factors: beam energy, beam power, and beam brightness. As a consequence, accelerators have found applications in a wide range of fields in our life and in our society. The current volume is dedicated to applications in energy and security, two of the most important and urgent topics in today's world.This volume makes an effort to provide a review as complete and up to date as possible of this broad and challenging subject. It contains overviews on each of the two topics and a series of articles for in-depth discussions including heavy ion accelerator driven inertial fusion, linear accelerator-based ADS systems, circular accelerator-based ADS systems, accelerator-reactor interface, accelerators for fusion material testing, cargo inspection, proton radiography, compact neutron generators and detectors. It also has a review article on accelerator science and technology in Canada with a focus on the TRIUMF laboratory, and an article on the life of Bruno Touschek, a renowned accelerator physicist.
Download or read book Utilisation and Reliability of High Power Proton Accelerators written by and published by OECD Publishing. This book was released on 2005 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication contains the technical papers presented at a NEA workshop, held in the Republic of Korea in May 2004, to consider research into the use of accelerator-driven systems (ADS) in radioactive waste management, as well as summaries of the working group discussions. Topics discussed include: accelerator reliability; target, window and coolant technology; sub-critical system design and ADS simulations; safety and control of ADS; ADS experiments and test facilities.
Download or read book Reviews of Accelerator Science and Technology written by Alexander W. Chao and published by World Scientific. This book was released on 2013-01-28 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is dedicated to superconducting technology and its applications, including superconducting magnets (SC magnets) and superconducting radio-frequency (SRF) cavities.
Download or read book Mechanical Properties of High Purity Niobium Novel Measurements written by Ganapati Myneni and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the procedures to improve the performance of superconducting niobium cavities is a heat treatment for several hours in an ultrahigh vacuum at temperatures between 800C and 1400C for hydrogen degassing or post-purification, respectively. However, it was recently observed with Spallation Neutron Source Project (SNS) prototype cavities, that a heat treatment at 800 C for even 1 hour degraded the mechanical properties of RRR niobium, in particular the yield strength. This lower strength resulted in cavity deformations during handling thus affecting both their resonant frequency and field profile. In addition to lowering the yield strength, it was observed in some lots of material that the Young's modulus was also apparently reduced by a factor of 2 as a result of the hydrogen outgassing at 800 C. Surprisingly, material received at other national laboratories exhibited similar anomalous behavior even without any heat treatments in vacuum. Based on these observations a multi-institutional collaborative basic research activity on high RRR niobium (determination of Nb yield strength as a function of grain size, work hardening, chemical composition, and heat treatment temperature) has been initiated by JLAB to gain a better understanding of the material properties affecting the mechanical behavior In this contribution, a brief review of the measurements at JLAB, at the Materials Science and Engineering Department of the University of Virginia, at the Analytical Chemistry and Metallurgy Divisions of the National Institute of Standard and Technology, Gaithersburg and in the Department of Physics, SUNY, Albany are presented. The measurements include yield strength, hardness, ultrasonic velocity, crystallographic structure, microstructure, determination of interstitial contents using internal friction; particular emphasis is placed on determining the hydrogen concentration in the niobium via Cold Neutron Prompt Gamma-Ray Activation Analysis and Neutron Incoherent Scattering and to measure hydrogen depth profiles near surface regions by Nuclear Reactions Analysis.
Download or read book OECD Papers written by and published by . This book was released on 2005 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compilation of reports previously issued by the OECD.
