Download or read book Superconducting Materials for High Energy Colliders written by Luisa Cifarelli and published by World Scientific. This book was released on 2001 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ELOISATRON (ELN) Project aims at a future proton supercollider with 100-500 TeV energy per beam and 1034-1036 cm-2s-1 luminosity. While the Large Hadron Collider (LHC) is being implemented at CERN, it is very timely to study the feasibility of the next generation of hadron colliders at the extreme limits of energy and luminosity. In this respect, the achievement of extremely high magnetic fields and the production of accelerating rf cavities with very low losses are a crucial point in the actual construction design of such a collider. The search for superconducting materials with suitable properties to be used in this field has gained a new impulse after the discovery of the so-called high temperature superconducting compounds (HTSCs) with superconducting critical temperatures higher than 100 K. Besides the critical temperatures, the transport performances of this class of compounds are still very far from allowing applications in extremely high energy colliders. On the other hand, in the last few years, the technological and scientific improvements obtained for both the HTSCs and the conventional superconducting materials are very promising.This book reviews the recent status of R&D on the rising generation of superconducting materials for accelerator magnets and cavities, and discusses novel aspects and ideas in this domain.
Download or read book Superconducting Materials for High Energy Colliders written by INFN ELOISATRON Project. Workshop and published by . This book was released on 2001 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Department of Energy s Superconducting Super Collider Project written by United States. Congress. Senate. Committee on Energy and Natural Resources. Subcommittee on Energy Research and Development and published by . This book was released on 1991 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Superconductivity written by A. Bisarsh and published by Nova Publishers. This book was released on 1999 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of over 600 selected descriptions and abstracts of books, book chapters, patents and journal articles from throughout the world dealing with this high-profile topic. Each citation contains complete bibliographic data plus key words. The entries are grouped under the headings of: Theory of Superconductivity; Superconducting Devices; Superconducting Properties of Materials; Applications of Superconductors: Author Index; Subject Index.
Download or read book Superconducting Super Collider written by United States. Congress. Senate. Committee on Energy and Natural Resources. Subcommittee on Energy Research and Development and published by . This book was released on 1988 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Superconducting Super Collider written by United States. Congress. House. Committee on Science, Space, and Technology and published by . This book was released on 1988 with total page 1102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Superconductivity written by R.G. Sharma and published by Springer Nature. This book was released on 2021-06-29 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the basics of superconductivity and applications of superconducting magnets. It explains the phenomenon of superconductivity, describes theories of superconductivity, and discusses type II and high-temperature cuprate superconductors. The main focus of the book is the application of superconducting magnets in accelerators, fusion reactors and other advanced applications such as nuclear magnetic resonance (NMR), magnetic resonance imaging (MRI), high-gradient magnetic separation (HGMS), and superconducting magnetic energy storage (SMES). This new and significantly extended second edition covers the state of the art in the development of novel superconductors for advanced magnet applications, as well as the production of practical superconducting wires, tapes, and ultra high current cables used for high-field magnets. It includes two new chapters each devoted to MgB2 and Fe-based superconductors, and discusses the recently developed and world record-setting 45.5-Tesla magnetic field generated by a combination of conventional and high-temperature cuprate superconducting magnets. In addition, it discusses the status and outlook of all current and future nuclear fusion reactors worldwide. The chapter on accelerators includes the ongoing efforts to build high luminosity LHC (HL-LHC), the high-energy 28 TeV LHC (HE-LHC), the future circular collider (FCC) at CERN, and the just launched electro-ion collider (EIC) at Brookhaven National Laboratory. The book is based on the long-standing experience of the author in studying superconducting materials, building magnets and delivering numerous lectures to research scholars and students. The book provides comprehensive and fundamental knowledge in the field of applied superconductivity, greatly benefiting researchers and graduate students wishing to learn more about the various aspects of superconductivity and advanced magnet applications.
Download or read book Detector Research And Development For The Superconducting Super Collider Proceedings Of The Symposium written by Valerie Kelly and published by World Scientific. This book was released on 1991-05-29 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last three years a significant program of detector technology research and development for high luminosity, high energy hadron-hadron colliders has been underway in the United States, Japan and Europe. In as much as the first formal steps have been undertaken to initiate the experimental program at the Superconducting Super Collider (SSC), it is appropriate to assess in detail the status of this R&D effort.Results and Plans for Advanced Technology R&D for Particle Physics Detectors Appropriate for SSC Experiments are Presented. Specific Topics include: Calorimetry; Particle Tracking and Identification Techniques; Vertex-Detection; Magnets; Front-End Electronics; Data Acquisition Electronics; Techniques in Triggering; Data Transmission; Data Analysis and Simulation Software; Studies on Radiation Damage to Materials and Electronics.
Download or read book Importance and Status of the Superconducting Super Collider written by United States. Congress. Senate. Committee on Energy and Natural Resources and published by . This book was released on 1992 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distributed to some depository libraries in microfiche.
Download or read book Superconducting Magnet Technology for Future Hadron Colliders written by and published by . This book was released on 1994 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of superconducting magnets to large-scale particle accelerators was successfully demonstrated with the completion of the Tevatron at Fermilab in 1983. This machine, utilizing dipole magnets operating at 4.5 T, has been operating successfully for the past 12 years. This success was followed a few years later by HERA, an electron-proton collider that uses superconducting quadrupoles and dipoles of a design similar to those in the Tevatron. The next major project was the ill-fated SSC, which was cancelled in 1993. However, the SSC R & D effort did succeed in demonstrating the reliable operation of dipole magnets up to 6.6 T. The LHC, now under construction, pushes the ductile superconductor, NbTi, to its limit in dipoles designed to operate at fields of 8.6 T at 1.8 K. Several recent studies have addressed the issues involved in taking the next step beyond the LHC. The Division of Particles and Fields Workshop on Future Hadron Facilities in the U.S., held at Indiana U. in 1994, examined two possible facilities--a 2-TeV on 2-TeV collider and a 30-Tev on 30-Tev collider. The participants arrived at the following conclusions with regard to superconducting magnets: (1) Superconducting magnets are the enabling technology for high energy colliders. As such, the highest priority for the future of hadron facilities in the U.S. is the reassembly of a U.S. superconducting magnet R & D program. (2) emphasis on conductor development and new magnet designs; and (3) goals of such a program might be (a) the development of a 9-10 Tesla magnet based on NbTi technology; (b) the development of high quality quadrupoles with gradients in the range 250-300 T/m; and (c) initiation of R & D activities aimed at moving beyond the existing technology as appears to be required for the development of a magnet operating at 12-15 Tesla. In order to reach fields above 10 T, magnet designers must turn to new materials with higher critical fields than that of NbTi. Several candidate conductors exist; unfortunately, all of these new materials are brittle, and thus pose new challenges to the magnet designers. At the same time that the forces on the magnet windings are increasing due to the higher Lorentz force associated with the higher magnetic fields, the conductor tensile strain must be limited to less than about 0.5% to prevent damage to the brittle superconducting material. Also, coil fabrication methods must be changed. If the superconductor is in the reacted, or brittle, state, the coil winding procedure must be modified to prevent overstraining. If the alternative wind and react approach is used, new insulating materials must be used that can survive the high temperature reactions (650 to 800 C) necessary to form the superconducting compounds. The issues associated with high-field dipole magnets have been discussed at a number of workshops, including those at DESY in 1991 and LBL in 1992. These workshops were extremely useful in defining the problems and focusing the attention of both materials and magnet experts on high-field dipole magnets; however, since neither set of proceedings was published, the information is not readily available. More recently, a workshop was held in Erice, Italy, under the sponsorship of the Ettore Maiorana Center for Scientific Culture. This international workshop was attended by 20 scientists from Europe, Japan, and the U.S., and the summary of that work, which represents the most recent and thorough assessment of the status of high-field magnets for accelerator magnets, is presented.
Download or read book Epioptics 9 written by Antonio Cricenti and published by World Scientific. This book was released on 2008 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: This special volume contains the proceedings of the 9th Epioptics Workshop, held at the Ettore Majorana Foundation and Centre for Scientific Culture, Erice, Sicily, from July 20 to 26, 2006. The workshop was the 9th in the Epioptics series and the 39th of the International School of Solid State Physics. The workshop was aimed at assessing the capabilities of state-of-the-art optical techniques in elucidating the fundamental electronic and structural properties of semiconductor and metal surfaces, interfaces, thin layers, and layer structures, and at assessing the usefulness of these techniques for optimization of high-quality multilayer samples through feedback control during materials growth and processing. Particular emphasis is dedicated to the theory of non-linear optics and to dynamical processes through the use of pump-probe techniques together with the search for new optical sources. Some new applications of scanning probe microscopy to material science and biological samples, dried and in vivo, with the use of different laser sources are also presented. Sample Chapter(s). Longitudinal Gauge Theory of Surface Second Harmonic Generation (966 KB). Contents: Longitudinal Gauge Theory of Surface Second Harmonic Generation (B S Mendoza); Excited State Properties Calculations: From 0 to 3 Dimensional Systems (M Marsili et al.); High Spatial Resolution Raman Scattering for Nano-structures (E Speiser et al.); Vibrational Properties and the Miniband Effect in InGaAs/InP Superlattices (A D Rodrigues et al.); Electronic and Optical Properties of ZnO Between 3 and 32 eV (M Rakel et al.); Order and Clusters in Model Membranes: Detection and Characterization by Infrared Scanning Near-Field Microscopy (J Generosi et al.); Chemical and Magnetic Properties of NiO Thin Films Epitaxially Grown on Fe(001) (A Brambilla); Probing the Dispersion of Surface Phonons by Light Scattering (G Benedek & J P Toennies); and other papers. Readership: Researchers as well as graduate and postgraduate students in applied physics, specifically semiconductors and related areas, electron microscopy and condensed matter physics.
Download or read book Epioptics 10 written by Antonio Cricenti and published by World Scientific. This book was released on 2010 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is aimed at assessing the capabilities of state-of-the-art optical techniques in elucidating the fundamental electronic and structural properties of semiconductor and metal surfaces, interfaces, thin layers, and layer structures, and assessing the usefulness of these techniques for optimization of high quality multilayer samples through feedback control during materials growth and processing. Particular emphasis is placed on the theory of non-linear optics and dynamical processes through the use of pump-probe techniques together with the search for new optical sources. Some new applications of Scanning Probe Microscopy to Material science and biological samples, dried and in vivo, with the use of different laser sources are also presented. Materials of special interest are silicon, semiconductor-metal interfaces, semiconductor and magnetic multi-layers and III-V compound semiconductors.
Download or read book Proceedings of the Fifty first Workshop of the INFN Eloisatron Project written by INFN ELOISATRON Project. Workshop and published by World Scientific. This book was released on 2010 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book ?Channeling 2008?, Charged and Neutral Particles Channeling Phenomena, is formed by the same title conference contributions. This volume includes papers by leading researchers from different world centers. Their recent results on the coherent phenomena of charged and neutral particles propagating through the structures of various sizes and periodicities are included here, along with historical reviews by pioneers of coherent bremsstrahlung and channeling radiation as well as crystal channeling collimation.
Download or read book Epioptics 10 Proceedings Of The 43rd Course Of The International School Of Solid State Physics written by Antonio Cricenti and published by World Scientific. This book was released on 2010-06-09 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is aimed at assessing the capabilities of state-of-the-art optical techniques in elucidating the fundamental electronic and structural properties of semiconductor and metal surfaces, interfaces, thin layers, and layer structures, and assessing the usefulness of these techniques for optimization of high quality multilayer samples through feedback control during materials growth and processing. Particular emphasis is placed on the theory of non-linear optics and dynamical processes through the use of pump-probe techniques together with the search for new optical sources. Some new applications of Scanning Probe Microscopy to Material science and biological samples, dried and in vivo, with the use of different laser sources are also presented. Materials of special interest are silicon, semiconductor-metal interfaces, semiconductor and magnetic multi-layers and III-V compound semiconductors.
Download or read book Proceedings of the Workshop of the INFN ELOISATRON Project written by Eugenio Nappi and published by World Scientific. This book was released on 2004 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The possible upgrade of LHC or a future generation of colliders at the extreme limits of energy and luminosity will require detectors based on very advanced technological solutions to fully exploit the physics opportunities offered. Major steps must be taken to design and realize devices that are able not only to handle very high rates but also to cope with the very harsh radiation environment without suffering any performance degradation.This book reviews the present status, current limits and recent developments in detection techniques and related aspects (simulation, signal acquisition, tracking, particle identification, etc.). Novel ideas in this domain are discussed with emphasis on the directions in which improvements in proven techniques are desired.The proceedings have been selected for coverage in: OCo Index to Scientific & Technical Proceedings- (ISTP- / ISI Proceedings)OCo Index to Scientific & Technical Proceedings (ISTP CDROM version / ISI Proceedings)OCo CC Proceedings OCo Engineering & Physical Sciences"
Download or read book Epioptics 8 written by Antonio Cricenti and published by World Scientific. This book was released on 2006 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the 8th Epioptics Workshop, held at the Ettore Majorana Foundation and Centre for Scientific Culture, Erice, Sicily. The book assesses the capabilities of state-of-the-art optical techniques in elucidating the fundamental electronic and structural properties of semiconductor and metal surfaces, interfaces, thin layers, and layer structures. The contributions consider the usefulness of these techniques for optimization of high quality multilayer samples through feedback control during materials growth and processing. Particular emphasis is placed on the theory of non-linear optics and on dynamical processes through the use of pump-probe techniques together with the search for new optical sources. Some new applications of Scanning Near-field Optical Microscopy to material science and biological samples, dried and in vivo, with the use of different laser sources are also included. Contents: Ab-Initio Theories for the Calculation of Excited States Properties (O Pulci et al.); Theory of Surface Second Harmonic Generation (W L Mochin & J A Maytorena); Lifetime of Excited States (B Hellsing); Raman Scattering as an Epioptic Probe for Low Dimensional Structures (E Speiser et al.); Molecular Assembly at Metal Surfaces Studied by Reflection Anisotropy Spectroscopy (D S Martin); Surface Preparation of Cu(110) for Ambient Environments (G E Isted et al.); Metal Nanofilms Studied with Infrared Spectroscopy (G Fahsold et al.); Optical Properties of Materials in an Undergraduate Physics Curriculum (J R Blanco); and other papers. Readership: Researchers, graduate and postgraduate students in physics and materials science."
Download or read book Complexity Metastability And Nonextensivity Proceedings Of The 31st Workshop Of The International School Of Solid State Physics written by Constantino Tsallis and published by World Scientific. This book was released on 2005-09-23 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: A broad introduction and overview of current interdisciplinary studies on complexity, this volume is an ideal starting point for scientists and graduate students who wish to enter the field. The book features a diverse collection of the latest research work not found in a single volume elsewhere.Among the highly regarded contributors to the volume are the 2004 Boltzmann medalists E G D Cohen and H E Stanley; G Parisi, Boltzmann medalist in 1992 and Dirac medalist in 1999; and numerous internationally renowned experts, such as S Abe, F T Arecchi, J-P Bouchaud, A Coniglio, W Ebeling, P Grigolini, R Mantegna, M Paczuski, A Robledo, L Pietronero, A Vespignani, and T Vicsek.
