Download or read book Superconducting Accelerator Magnets written by K.-H. Mess and published by World Scientific. This book was released on 1996 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main topic of the book are the superconducting dipole and quadrupole magnets needed in high-energy accelerators and storage rings for protons, antiprotons or heavy ions. The basic principles of low-temperature superconductivity are outlined with special emphasis on the effects which are relevant for accelerator magnets. Properties and fabrication methods of practical superconductors are described. Analytical methods for field calculation and multipole expansion are presented for coils without and with iron yoke. The effect of yoke saturation and geometric distortions on field quality is studied. Persistent magnetization currents in the superconductor and eddy currents the copper part of the cable are analyzed in detail and their influence on field quality and magnet performance is investigated. Superconductor stability, quench origins and propagation and magnet protection are addressed. Some important concepts of accelerator physics are introduced which are needed to appreciate the demanding requirements on field quality in large storage rings. The operational experience with the superconducting HERA collider serves as an illustration. Finally superconducting correction coils and practical construction and fabrication methods of accelerator magnets are discussed. The physical and technical principles described in the book are substantiated with a wealth of experimental data on multipoles, persistent- and eddy-current effects, quench performance and much more.
Download or read book Nb3Sn Accelerator Magnets written by Alexander V Zlobin and published by . This book was released on 2020-10-08 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book is written by world-recognized experts in the fields of applied superconductivity and superconducting accelerator magnet technologies. It provides a contemporary review and assessment of the experience in research and development of high-field accelerator dipole magnets based on Nb3Sn superconductor over the past five decades. The reader attains clear insight into the development and the main properties of Nb3Sn composite superconducting wires and Rutherford cables, and details of accelerator dipole designs, technologies and performance. Special attention is given to innovative features of the developed Nb3Sn magnets. The book concludes with a discussion of accelerator magnet needs for future circular colliders.; Broadens our understanding of design and performance limits of high-field Nb3Sn accelerator magnets for a future very high energy hadron collider Offers beginners a concise overview of the relevant design concepts for a new generation of superconducting accelerator magnets based on Nb3Sn superconductor Illustrates the complete process of accelerator magnet design and fabrication Provides a contemporary review and assessment of the past experience with Nb3Sn high-field dipole accelerator magnets Identifies the main open R&D issues for Nb3Sn high-field dipole magnets This work was published by Saint Philip Street Press pursuant to a Creative Commons license permitting commercial use. All rights not granted by the work's license are retained by the author or authors.
Download or read book Superconducting Technology written by Kristian Fossheim and published by World Scientific. This book was released on 1991 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains an interdisciplinary selection of timely articles which cover a wide range of superconducting technologies ranging from high tech medicine (10-12 Gauss) to multipurpose sensors, microwaves, radio engineering, magnet technology for accelerators, magnetic energy storage, and power transmission on the 109 watt scale. It is aimed primarily at the non-specialist and will be suitable as an introductory course book for those in the relevant fields and related industries. As shown in the title several examples of high-c applications are included. While low-Tc is still the leading technology, for instance, in cables and SQUIDS, case studies in these areas are presented.
Download or read book Reviews Of Accelerator Science And Technology Volume 4 Accelerator Applications In Industry And The Environment written by Alexander Wu Chao and published by World Scientific. This book was released on 2012-02-20 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their debut in the late 1920s, particle accelerators have evolved into a backbone for the development of science and technology in modern society. Of about 30,000 accelerators at work in the world today, a majority is for applications in industry (about 20,000 systems worldwide).There are two major categories of industrial applications: materials processing and treatment, and materials analysis. Materials processing and treatment includes ion implantation (semi-conductor materials, metals, ceramics, etc.) and electron beam irradiation (sterilization of medical devices, food pasteurization, treatment of carcasses and tires, cross-linking of polymers, cutting and welding, curing of composites, etc.). Materials analysis covers ion beam analysis (IBA), non-destructive detection using photons and neutrons, as well as accelerator mass spectrometry (AMS). All the products that are processed, treated and inspected using beams from particle accelerators are estimated to have a collective value of US$500 billion per annum worldwide. Accelerators are also applied for environment protection, such as purifying drinking water, treating waste water, disinfecting sewage sludge and removing pollutants from flue gases.Industrial accelerators continue to evolve, in terms of new applications, qualities and capabilities, and reduction of their costs. Breakthroughs are encountered whenever a new product is made, or an existing product becomes more cost effective. Their impact on our society continues to grow with the potential to address key issues in economics or the society of today.This volume contains fourteen articles, all authored by renowned scientists in their respective fields.
Download or read book Opportunities in High Magnetic Field Science written by National Research Council and published by National Academies Press. This book was released on 2005-08-26 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-field magnetsâ€"those that operate at the limits of the mechanical and/or electromagnetic properties of their structural materialsâ€"are used as research tools in a variety of scientific disciplines. The study of high magnetic fields themselves is also important in many areas such as astrophysics. Because of their importance in scientific research and the possibility of new breakthroughs, the National Science Foundation asked the National Research Council to assess the current state of and future prospects for high-field science and technology in the United States. This report presents the results of that assessment. It focuses on scientific and technological challenges and opportunities, and not on specific program activities. The report provides findings and recommendations about important research directions, the relative strength of U.S. efforts compared to other countries, and ways in which the program can operate more effectively.
Download or read book High Field Superconducting Magnets written by Fred M. Ašner and published by Oxford University Press. This book was released on 1999 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superconducting devices, which can carry huge currents and generate strong magnetic fields without losing energy, are improving at a tremendous pace. This book provides a modern, up-to-date reference on both the physics and the technology of superconducting magnets. It is unique in combining the theoretical aspects of superconductivity, electromagnetic field theory, and the thermodynamics of helium cooling with the technological details of producing and engineering high performance superconducting materials. The book provides the reliable, expert advice for designing, manufacturing, and testing complex high field superconducting magnets of predictable performance, and it places particular emphasis on beam transport and accelerator magnets in high energy particle physics.
Download or read book High Magnetic Field Science and Its Application in the United States written by National Research Council and published by National Academies Press. This book was released on 2013-12-25 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Committee to Assess the Current Status and Future Direction of High Magnetic Field Science in the United States was convened by the National Research Council in response to a request by the National Science Foundation. This report answers three questions: (1) What is the current state of high-field magnet science, engineering, and technology in the United States, and are there any conspicuous needs to be addressed? (2) What are the current science drivers and which scientific opportunities and challenges can be anticipated over the next ten years? (3) What are the principal existing and planned high magnetic field facilities outside of the United States, what roles have U.S. high field magnet development efforts played in developing those facilities, and what potentials exist for further international collaboration in this area? A magnetic field is produced by an electrical current in a metal coil. This current exerts an expansive force on the coil, and a magnetic field is "high" if it challenges the strength and current-carrying capacity of the materials that create the field. Although lower magnetic fields can be achieved using commercially available magnets, research in the highest achievable fields has been, and will continue to be, most often performed in large research centers that possess the materials and systems know-how for forefront research. Only a few high field centers exist around the world; in the United States, the principal center is the National High Magnetic Field Laboratory (NHMFL). High Magnetic Field Science and Its Application in the United States considers continued support for a centralized high-field facility such as NHFML to be the highest priority. This report contains a recommendation for the funding and siting of several new high field nuclear magnetic resonance magnets at user facilities in different regions of the United States. Continued advancement in high-magnetic field science requires substantial investments in magnets with enhanced capabilities. High Magnetic Field Science and Its Application in the United States contains recommendations for the further development of all-superconducting, hybrid, and higher field pulsed magnets that meet ambitious but achievable goals.
Download or read book Superconducting Devices Materials written by and published by . This book was released on 1968 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Large Hadron Collider written by Lyndon R. Evans and published by EPFL Press. This book was released on 2009-01-01 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the technology and engineering of the Large Hadron collider (LHC), one of the greatest scientific marvels of this young 21st century. This book traces the feat of its construction, written by the head scientists involved, placed into the context of the scientific goals and principles.
Download or read book 100 Years of Superconductivity written by Horst Rogalla and published by Taylor & Francis. This book was released on 2011-11-11 with total page 866 pages. Available in PDF, EPUB and Kindle. Book excerpt: Even a hundred years after its discovery, superconductivity continues to bring us new surprises, from superconducting magnets used in MRI to quantum detectors in electronics. 100 Years of Superconductivity presents a comprehensive collection of topics on nearly all the subdisciplines of superconductivity. Tracing the historical developments in supe
Download or read book Risks and Benefits of Building the Superconducting Super Collider written by Philip Webre and published by . This book was released on 1988 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Detectors for Particles and Radiation written by H. Schopper and published by Springer Science & Business Media. This book was released on 2011-01-21 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Competent experts provide a summary of the enormous progress achieved in the development of new detection methods of charged and neutral particles, and photons. These achievements were initiated by the advent of new particle colliders, e.g. the LHC at CERN but also by non-accelerator experiments. The present 2nd part of the handbook is devoted to the integration of detectors in large experiments, detectors for special applications, as well as the application of detectors in other fields like e.g. medicine, biology, applied physics and industry.
Download or read book Fundamentals of Superconductivity written by Vladimir Z. Kresin and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: The recent discovery of high-temperature superconductivity has resulted in a remarkable growth in the amount of research and the number of researchers working in this exciting field. Superconductivity is not a new phenomenon: in 1991 it will be 80 years old. Even though it was the newer discoveries which motivated us to write this book, the book itself is mainly a description of the fundamentals of the phenomenon. The book is written for a very broad audience, including students, engin eers, teachers, scientists, and others who are interested in learning about this exciting frontier of science. We have focused on the qualitative aspects, so that the reader can develop a basic understanding of the fundamental physics without getting bogged down in the details. Because of this approach, our list of refer ences is not comprehensive, and it is supplemented with a summary of additional reading consisting of monographs and selected review articles. (The articles we have referenced were either not reflected in the review articles on monographs or were milestones in the development of the field. ) In addition, some of the sections which can be skipped during the first reading have been marked with asterisks (*). Until recently, superconductivity was considered to belong to the field of low-temperature physics. This field was born, simultaneously with quantum physics, at the beginning of this century. Initially these two contemporaneous fields developed independently, but they soon became strongly coupled.
Download or read book Superconductivity written by R.G. Sharma and published by Springer. This book was released on 2015-02-26 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the basics and applications of superconducting magnets. It explains the phenomenon of superconductivity, theories of superconductivity, type II superconductors and high-temperature cuprate superconductors. The main focus of the book is on the application to superconducting magnets to accelerators and fusion reactors and other applications of superconducting magnets. The thermal and electromagnetic stability criteria of the conductors and the present status of the fabrication techniques for future magnet applications are addressed. The book is based on the long experience of the author in studying superconducting materials, building magnets and numerous lectures delivered to scholars. A researcher and graduate student will enjoy reading the book to learn various aspects of magnet applications of superconductivity. The book provides the knowledge in the field of applied superconductivity in a comprehensive way.
Download or read book Superconducting Materials for High Energy Colliders written by Luisa Cifarelli and published by World Scientific. This book was released on 2001 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ELOISATRON (ELN) Project aims at a future proton supercollider with 100-500 TeV energy per beam and 1034-1036 cm-2s-1 luminosity. While the Large Hadron Collider (LHC) is being implemented at CERN, it is very timely to study the feasibility of the next generation of hadron colliders at the extreme limits of energy and luminosity. In this respect, the achievement of extremely high magnetic fields and the production of accelerating rf cavities with very low losses are a crucial point in the actual construction design of such a collider. The search for superconducting materials with suitable properties to be used in this field has gained a new impulse after the discovery of the so-called high temperature superconducting compounds (HTSCs) with superconducting critical temperatures higher than 100 K. Besides the critical temperatures, the transport performances of this class of compounds are still very far from allowing applications in extremely high energy colliders. On the other hand, in the last few years, the technological and scientific improvements obtained for both the HTSCs and the conventional superconducting materials are very promising.This book reviews the recent status of R&D on the rising generation of superconducting materials for accelerator magnets and cavities, and discusses novel aspects and ideas in this domain.
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1976 with total page 964 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Final Report of the Committee on a Strategic Plan for U S Burning Plasma Research written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2019-07-01 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fusion offers the prospect of virtually unlimited energy. The United States and many nations around the world have made enormous progress toward achieving fusion energy. With ITER scheduled to go online within a decade and demonstrate controlled fusion ten years later, now is the right time for the United States to develop plans to benefit from its investment in burning plasma research and take steps to develop fusion electricity for the nation's future energy needs. At the request of the Department of Energy, the National Academies of Sciences, Engineering, and Medicine organized a committee to develop a strategic plan for U.S. fusion research. The final report's two main recommendations are: (1) The United States should remain an ITER partner as the most cost-effective way to gain experience with a burning plasma at the scale of a power plant. (2) The United States should start a national program of accompanying research and technology leading to the construction of a compact pilot plant that produces electricity from fusion at the lowest possible capital cost.
