Download or read book Supercomputer Architecture written by Paul B. Schneck and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supercomputers are the largest and fastest computers available at any point in time. The term was used for the first time in the New York World, March 1920, to describe "new statistical machines with the mental power of 100 skilled mathematicians in solving even highly complex algebraic problems. " Invented by Mendenhall and Warren, these machines were used at Columbia University'S Statistical Bureau. Recently, supercomputers have been used primarily to solve large-scale prob lems in science and engineering. Solutions of systems of partial differential equa tions, such as those found in nuclear physics, meteorology, and computational fluid dynamics, account for the majority of supercomputer use today. The early computers, such as EDVAC, SSEC, 701, and UNIVAC, demonstrated the feasibility of building fast electronic computing machines which could become commercial products. The next generation of computers focused on attaining the highest possible computational speeds. This book discusses the architectural approaches used to yield significantly higher computing speeds while preserving the conventional, von Neumann, machine organization (Chapters 2-4). Subsequent improvements depended on developing a new generation of computers employing a new model of computation: single-instruction multiple data (SIMD) processors (Chapters 5-7). Later machines refmed SIMD architec ture and technology (Chapters 8-9). SUPERCOMPUTER ARCHITECI'URE CHAPTER! INTRODUCTION THREE ERAS OF SUPERCOMPUTERS Supercomputers -- the largest and fastest computers available at any point in time -- have been the products of complex interplay among technological, architectural, and algorithmic developments.
Download or read book The Architecture of Supercomputers written by Daniel P. Siewiorek and published by Academic Press. This book was released on 2014-05-10 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Architecture of Supercomputers: Titan, A Case Study describes the architecture of the first member of an entirely new computing class, the graphic supercomputing workstation known as Titan. This book is divided into seven chapters. Chapter 1 provides an overview of the Titan architecture, including the motivation, organization, and processes that created it. A survey of all the techniques to speed up computation is presented in Chapter 2. Chapter 3 reviews the issue of particular benchmarks and measures, while Chapter 4 analyzes a model of a concurrency hierarchy extending from the register set to the entire operating system. The architecture of Titan graphics supercomputer and its implementation are considered in Chapter 5. Chapter 6 examines the performance of Titan in terms of the various information flow data rates. The last chapter is devoted to the actual performance on benchmark kernels and how the architecture and implementation affect performance. This publication is recommended for architects and engineers designing processors and systems.
Download or read book Supercomputers written by Architecture Technology Architecture Technology Corpor and published by Elsevier. This book was released on 2014-06-28 with total page 109 pages. Available in PDF, EPUB and Kindle. Book excerpt: Please note this is a Short Discount publication. Thoroughly revised and updated, this year's report contains invaluable information investigating the impact of supercomputing technology on data processing in the near term and its influence for the next five years. The information and data in this report are critical in supplying: information on the size of each of the technical computing segments, what percentage of each is comprised of vector and parallel systems now, and what that percentage will be by 1995. For each technical computing segments, the report gives dollar volumes, units shipped, user industries, applications, operating system requirements, vector shares of market and installations. Find out which computing segments and vectors show the greatest promise for growth and profitability. The technical aspects influencing the development of supercomputing architectures and the features driving their user acceptance are analyzed. The report also provides immediate market opportunities by discussing types of applications that will benefit most from supercomputing technology.
Download or read book Supercomputers written by National Academy of Sciences and published by National Academies Press. This book was released on 1989-02-01 with total page 113 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supercomputers are the ultimate engine of the information age. By generating and processing vast amounts of data with hitherto unparalleled speed, they make new activities in industrial research and product development possible. Supercomputers explores commercial supercomputer applications today as well as those emerging from university laboratories. It outlines trends in the supercomputing technology into the near future, and also contributes to a growing debate on the roles of the public and private sectors in nurturing this vital technology.
Download or read book Japanese Supercomputing written by Raul H. Mendez and published by Springer Science & Business Media. This book was released on 2013-03-07 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Electromagnetics and Supercomputer Architecture written by and published by . This book was released on 1993 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific Computing on Supercomputers written by J.T. Devreese and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Workshops on "The Use of Supercomputers in Theoretical Science" have become a tradition at the Univer sity of Antwerp, Belgium. The first one took place in 1984. This volume combines the proceedings of the second work shop (December 12, 1985), of the third (June 16, 1987) and of the fourth (June 9, 1988). The principal aim of the International Workshops is to present the state-of-the-art in scientific high speed computa tion. Indeed, during the past ten years computational science has become a third methodology with merits equal to the theo retical and experimental sciences. Regretfully, access to supercomputers remains limited for academic researchers. None theless, supercomputers have become a major tool for scientists in a wide variety of scientific fields, and they lead to a realistic solution of problems that could not be solved a decade ago. It is a pleasure to thank the Belgian National Science Foundation (NFWO-FNRS) for the sponsoring of all the workshops. These workshops are organized in the framework of the Third Cy cle "Vectorization, Parallel Processing and Supercomputers", which is also funded by the NFWO-FNRS. The other sponsor I want to thank is the University of Antwerp, where the workshops took place. The University of Antwerp (UIA), together with the NFWO-FNRS, are also the main sponsors of the ALPHA-project, which gives the scientists of Belgium the opportunity to obtain an easy supercomputer connection.
Download or read book Chip Multiprocessor Architecture written by Kunle Olukotun and published by Springer Nature. This book was released on 2022-05-31 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chip multiprocessors - also called multi-core microprocessors or CMPs for short - are now the only way to build high-performance microprocessors, for a variety of reasons. Large uniprocessors are no longer scaling in performance, because it is only possible to extract a limited amount of parallelism from a typical instruction stream using conventional superscalar instruction issue techniques. In addition, one cannot simply ratchet up the clock speed on today's processors, or the power dissipation will become prohibitive in all but water-cooled systems. Compounding these problems is the simple fact that with the immense numbers of transistors available on today's microprocessor chips, it is too costly to design and debug ever-larger processors every year or two. CMPs avoid these problems by filling up a processor die with multiple, relatively simpler processor cores instead of just one huge core. The exact size of a CMP's cores can vary from very simple pipelines to moderately complex superscalar processors, but once a core has been selected the CMP's performance can easily scale across silicon process generations simply by stamping down more copies of the hard-to-design, high-speed processor core in each successive chip generation. In addition, parallel code execution, obtained by spreading multiple threads of execution across the various cores, can achieve significantly higher performance than would be possible using only a single core. While parallel threads are already common in many useful workloads, there are still important workloads that are hard to divide into parallel threads. The low inter-processor communication latency between the cores in a CMP helps make a much wider range of applications viable candidates for parallel execution than was possible with conventional, multi-chip multiprocessors; nevertheless, limited parallelism in key applications is the main factor limiting acceptance of CMPs in some types of systems. After a discussion of the basic pros and cons of CMPs when they are compared with conventional uniprocessors, this book examines how CMPs can best be designed to handle two radically different kinds of workloads that are likely to be used with a CMP: highly parallel, throughput-sensitive applications at one end of the spectrum, and less parallel, latency-sensitive applications at the other. Throughput-sensitive applications, such as server workloads that handle many independent transactions at once, require careful balancing of all parts of a CMP that can limit throughput, such as the individual cores, on-chip cache memory, and off-chip memory interfaces. Several studies and example systems, such as the Sun Niagara, that examine the necessary tradeoffs are presented here. In contrast, latency-sensitive applications - many desktop applications fall into this category - require a focus on reducing inter-core communication latency and applying techniques to help programmers divide their programs into multiple threads as easily as possible. This book discusses many techniques that can be used in CMPs to simplify parallel programming, with an emphasis on research directions proposed at Stanford University. To illustrate the advantages possible with a CMP using a couple of solid examples, extra focus is given to thread-level speculation (TLS), a way to automatically break up nominally sequential applications into parallel threads on a CMP, and transactional memory. This model can greatly simplify manual parallel programming by using hardware - instead of conventional software locks - to enforce atomic code execution of blocks of instructions, a technique that makes parallel coding much less error-prone. Contents: The Case for CMPs / Improving Throughput / Improving Latency Automatically / Improving Latency using Manual Parallel Programming / A Multicore World: The Future of CMPs
Download or read book Scientific Supercomputing written by Willi Schönauer and published by . This book was released on 2000 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Frontiers of Supercomputing II written by Karyn R Ames and published by Univ of California Press. This book was released on 1994-01-01 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Will be welcomed by many communities--academic, federal, and industrial. With new and little-known information on high-performance computing, it is the great compendium describing the last seven years of activities and looking to the future."--Charles Bender, Director, The Ohio Supercomputer Center "A valuable resource and an important contribution to thinking in this area. . . . I am impressed with the scope and coherence of this material, ranging from technical projections to the political context to market and user perspectives on supercomputers and supercomputing."--James G. Glimm, State University of New York at Stonybrook
Download or read book Peer to Peer Computing written by Alfred Wai-Sing Loo and published by Springer Science & Business Media. This book was released on 2007-10-18 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Communications of ACM Internet Research IEEE Transactions on Parallel and Distributed Systems Parallel Computing IEEE Transactions on Computers ACM Transactions on Computer Systems
Download or read book Computer Architecture written by Behrooz Parhami and published by OUP USA. This book was released on 2005-03-17 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is designed for the first course in Computer Architecture, usually offered at the junior/senior (3rd, 4th year) level in electrical engineering, computer science or computer engineering departments. This course is required of all electrical engineering and computer science/computer engineering majors specializing in the design of computer systems. This text provides a comprehensive introduction to computer architecture, covering topic from design of simple microprocessors to techniques used in the most advanced supercomputers.
Download or read book Introduction to Reconfigurable Supercomputing written by Marco Lanzagorta and published by Morgan & Claypool Publishers. This book was released on 2010 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers technologies, applications, tools, languages, procedures, advantages, and disadvantages of reconfigurable supercomputing using Field Programmable Gate Arrays (FPGAs). The target audience is the community of users of High Performance Computers (HPC) who may benefit from porting their applications into a reconfigurable environment. As such, this book is intended to guide the HPC user through the many algorithmic considerations, hardware alternatives, usability issues, programming languages, and design tools that need to be understood before embarking on the creation of reconfigurable parallel codes. We hope to show that FPGA acceleration, based on the exploitation of the data parallelism, pipelining and concurrency remains promising in view of the diminishing improvements in traditional processor and system design. Table of Contents: FPGA Technology / Reconfigurable Supercomputing / Algorithmic Considerations / FPGA Programming Languages / Case Study: Sorting / Alternative Technologies and Concluding Remarks
Download or read book It Infrastructure Architecture Infrastructure Building Blocks and Concepts Second Edition written by Sjaak Laan and published by Sjaak Laan. This book was released on 2012-12-16 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: For many decades, IT infrastructure has provided the foundation for successful application deployment. Yet, general knowledge of infrastructures is still not widespread. Experience shows that software developers, system administrators, and project managers often have little knowledge of the big influence IT infrastructures have on the performance, availability and security of software applications. This book explains the concepts, history, and implementation of IT infrastructures. Although many of books can be found on individual infrastructure building blocks, this is the first book to describe all of them: datacenters, servers, networks, storage, virtualization, operating systems, and end user devices. Whether you need an introduction to infrastructure technologies, a refresher course, or a study guide for a computer science class, you will find that the presented building blocks and concepts provide a solid foundation for understanding the complexity of today's IT infrastructures.
Download or read book Experimental Parallel Computing Architectures written by J. J. Dongarra and published by North Holland. This book was released on 1987 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Systems Organization -- Parallel architecture.
Download or read book U S Supercomputer Industry written by United States. Congress. House. Committee on Science, Space, and Technology. Subcommittee on Science, Research, and Technology and published by . This book was released on 1989 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Visualization in Supercomputing written by Raul H. Mendez and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: Massive amounts of numeric data are far more comprehensible when converted into graphical form. Hence visualization is becoming an integral part of many areas of research. The idea of visualization is not new, but techniques for visualization are still being developed, and visualization research is just beginning to be recognized as a cornerstone of future computer science. As scientists handle increasingly complex problems with computers, visualization will become an even more essential tool for extracting sense from numbers. This volume is a collection of the best papers selected from those presented at the August 1988 Visualization in Supercomputing Conference in Tokyo, Japan. It is divided into three parts: visualization applications, hardware and performance, and visualization theory. Subjects covered include visualization methods used in computational fluid dynamics research, time-to-solution aspects of visualization, the use of parallel/vector computers with finite element method systems, basic computational performance of two graphics supercomputers, and the applicability of the volume imaging concept in various fields.
