Download or read book Summary of the Thirteenth Meeting of the Refractory Composites Working Group written by J. R. Van Orsdel and published by . This book was released on 1967 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: This memorandum summarizes information on refractory materials and composites that was presented at the Thirteenth Meeting of the Refractory Composites Working Group in Seattle, Washington on July 18-20, 1966. The memorandum is based on 34 papers that were presented at the meeting. They are reviewed and discussed briefly within the framework of the following four broad areas: materials technology, process technology, specific hardware applications and tests, and evaluation techniques. Included in the section on materials technology are discussions dealing with bulk refractory materials, coated systems, and fiber-reinforced composites. The section on process technology discusses cladding and general fabrication processes. The specific hardware applications and tests cover rocket-motor components, and cladding of a probe used in the glass industry. The section on evaluation techniques covers thermal testing, and non-destructive testing. (Author).
Download or read book Summary of the Thirteenth Refractory Composites Working Group Meeting written by Elvin H. Beardslee and published by . This book was released on 1968 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: The report is a compilation of 36 papers describing the information discussed at the Thirteenth Refractory Composites Working Group Meeting held at The Olympic Hotel, Seattle, Washington on 18, 19, and 20 July 1967. Representatives of various organizations presented informal discussions of their current activities in the fields of development, evaluation and application of inorganic refractory composites for use in high temperature environments.
Download or read book SUMMARY OF THE 13TH MEETING OF THE REFRACTORY COMPOSITES WORKING GROUP written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Summary of the 13th Meeting of the Refractory Composites Working Group Seattle Wash July 18 20 1966 written by J.R. van Orsdel and published by . This book was released on 1967 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stress corrosion Cracking of Aluminum Alloys written by F. R. Mertens and published by . This book was released on 1967 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Arc Plasma Technology in Materials Science written by Dennis A. Gerdeman and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although a considerable amount of information concerning the applications for arc plasmas in the materials sciences is available, it is contained in literally thousands of separate manuals, technical notes, textbooks, and government and industrial reports. Each source generally deals with only one specific application or, at best, a narrow range of utilization. This book was developed to provide a comprehensive and up-to-date compilation of information in the technology of arc plasma utilization. The book is divided into two general categories: flame spraying and materials evaluation. In the flame spraying section a comprehensive review of the plasma spraying process is presented. The design and operation of plasma spraying equipment are described. Included are a description of the nature of a plasma, and the design and operation of plasma generators, powder feed systems and accessory control equip ment. The general process procedures, and associated process variables are de scribed. Particular emphasis is given to the particle heating process and the mechanisms for adherence and cohesion of coatings. Competitive flame spraying equipment is also detailed (combustion process, detonation and electric arc) and compared with the plasma spray process. A discussion and compilation of flame sprayed ceramic and metal materials, their properties and applications are also included.
Download or read book Fiber reinforced Metal matrix Composites written by Curtis Maitland Jackson and published by . This book was released on 1967 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: The introductory sections contain a brief discussion of the general methods of producing fiber-reinforced composites and of the theory of fiber-reinforcement of metals. The body of the report describes research on fiber-reinforced metal matrix composites, and is organized according to metal matrix materials. For convenience, the report is divided into two sections: Low density matrices (including aluminum, magnesium, and titanium and their alloys) and high density matrices (cobalt, copper and its alloys, iron, lead-tin alloys, nickel and nickel alloys, silver, tantalum, and tungsten). (Author).
Download or read book The Oxidation and Contamination of Titanium and Its Alloys written by J. M. Ferguson and published by . This book was released on 1968 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experimental programs concerned with the oxidation of titanium and its alloys are reviewed and results compared with those predicted by theory. Wagner-Hauffe theory is used as the primary basis for comparison, and its inconsistencies are pointed out. Fifteen binary alloy systems involving titanium are covered, as well as a few ternary and commercial alloys. A short section discusses the effects of oxygen or nitrogen contamination on the mechanical properties of titanium and its alloys. (Author).
Download or read book Fracture Toughness of High strength Steels for Military Applications written by J. E. Campbell and published by . This book was released on 1968 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Memorandum discusses the current situation on the inclusion of fracture-toughness testing requirements in specifications for high-strength steels used for military applications. The Memorandum was prepared at the request of The Technical Cooperation Program (TTCP), and contains information from Canadian and British members of that program, as well as U.S. information. Military applications discussed include missile motor cases, aircraft landing gear, gun tubes, armor plate, and hydrofoils. (Author).
Download or read book Joining of Titanium written by Robert Edward Monroe and published by . This book was released on 1967 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report supplies information on joining processes applicable to titanium and its alloys in sheet metal applications, primarily related directly to airframe construction. Although the material presented here does not cover all titanium joining processes, and omits such processes as plasma-arc, submerged-arc, electroslag, flash, and high-frequency resistance welding, the data presented cover materials up to 2-inches thick in some cases and the report should be useful to anyone seeking titanium joining information. The joining processes covered fall into five categories: welding, brazing, metallurgical bonding (diffusion and deformation bonding), adhesive bonding, and mechanical fastening. The fusion welding processes that are discussed in detail include gas tungsten arc, gas metal arc, arc spot, and electron beam. The resistance processes give extended coverage are spot, roll spot, and seam welding. (Author).
Download or read book Index to DMIC Reports and Memoranda written by Battelle Memorial Institute. Defense Metals Information Center and published by . This book was released on 1968 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Melting and Casting Review written by and published by . This book was released on 1967 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: This memorandum reviews nineteen papers dealing with melting and casting technology of particular interest to DMIC users. The papers were given at the International Metallurgy Conference on June 12-16, 1967 at New York City. These papers were broadly concerned with progress in vacuum-metallurgy technology internationally, materials in vacuum environment, vacuum-metallurgical processes, and vacuum equipment and instrumentation. (Author).
Download or read book Corrosion of Beryllium written by Paul D. Miller and published by . This book was released on 1967 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: The report summarizes the corrosion behavior of beryllium. The effects on beryllium of the following environments are considered: moisture, salt solutions, acids, alkalis, gases, organic liquids, molten materials, and solid materials. Stress-corrosion cracking and galvanic effects are also discussed. A final section of the report reviews various types of coatings for protection of beryllium from corrosion by a variety of environments.
Download or read book Accelerated Crack Propagation of Titanium by Methanol Halogenated Hydrocarbons and Other Solutions written by and published by . This book was released on 1967 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Technical Abstract Bulletin written by and published by . This book was released on with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Abstracts of AF Materials Laboratory Reports written by Air Force Materials Laboratory (U.S.) and published by . This book was released on 1969-05 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Summary of the Sixth Meeting of the Refractory Composites Working Group written by W. A. Gibeaut and published by . This book was released on 1962 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: I NFORMATION ON REFRACTORY COMPOSITES FOR USE ABOVE