Download or read book Successful Science and Engineering Teaching in Colleges and Universities 2nd Edition written by Calvin S. Kalman and published by IAP. This book was released on 2017-06-01 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the author's work in science and engineering educational research, this book offers broad, practical strategies for teaching science and engineering courses and describes how faculty can provide a learning environment that helps students comprehend the nature of science, understand science concepts, and solve problems in science courses. This book's student?centered approach focuses on two main themes: writing to learn (especially Reflective Writing) and interactive activities (collaborative groups and labatorials). When faculty incorporate these methods into their courses, students gain a better understanding of science as a connected structure of concepts rather than as a toolkit of assorted practices.
Download or read book Successful Science and Engineering Teaching written by Calvin S. Kalman and published by Springer. This book was released on 2017-10-11 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: The intent of this book is to describe how a professor can provide a learning environment that assists students in coming to grips with the nature of science and engineering, to understand science and engineering concepts, and to solve problems in science and engineering courses. The book is based upon articles published in Science Educational Research and which are grounded in educational research (both quantitative and qualitative) performed by the author over many years.
Download or read book Successful K 12 STEM Education written by National Research Council and published by National Academies Press. This book was released on 2011-07-22 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science, technology, engineering, and mathematics (STEM) are cultural achievements that reflect our humanity, power our economy, and constitute fundamental aspects of our lives as citizens, consumers, parents, and members of the workforce. Providing all students with access to quality education in the STEM disciplines is important to our nation's competitiveness. However, it is challenging to identify the most successful schools and approaches in the STEM disciplines because success is defined in many ways and can occur in many different types of schools and settings. In addition, it is difficult to determine whether the success of a school's students is caused by actions the school takes or simply related to the population of students in the school. Successful K-12 STEM Education defines a framework for understanding "success" in K-12 STEM education. The book focuses its analysis on the science and mathematics parts of STEM and outlines criteria for identifying effective STEM schools and programs. Because a school's success should be defined by and measured relative to its goals, the book identifies three important goals that share certain elements, including learning STEM content and practices, developing positive dispositions toward STEM, and preparing students to be lifelong learners. A successful STEM program would increase the number of students who ultimately pursue advanced degrees and careers in STEM fields, enhance the STEM-capable workforce, and boost STEM literacy for all students. It is also critical to broaden the participation of women and minorities in STEM fields. Successful K-12 STEM Education examines the vast landscape of K-12 STEM education by considering different school models, highlighting research on effective STEM education practices, and identifying some conditions that promote and limit school- and student-level success in STEM. The book also looks at where further work is needed to develop appropriate data sources. The book will serve as a guide to policy makers; decision makers at the school and district levels; local, state, and federal government agencies; curriculum developers; educators; and parent and education advocacy groups.
Download or read book Transforming Undergraduate Education in Science Mathematics Engineering and Technology written by National Research Council and published by National Academies Press. This book was released on 1999-03-25 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today's undergraduate studentsâ€"future leaders, policymakers, teachers, and citizens, as well as scientists and engineersâ€"will need to make important decisions based on their understanding of scientific and technological concepts. However, many undergraduates in the United States do not study science, mathematics, engineering, or technology (SME&T) for more than one year, if at all. Additionally, many of the SME&T courses that students take are focused on one discipline and often do not give students an understanding about how disciplines are interconnected or relevant to students' lives and society. To address these issues, the National Research Council convened a series of symposia and forums of representatives from SME&T educational and industrial communities. Those discussions contributed to this book, which provides six vision statements and recommendations for how to improve SME&T education for all undergraduates. The book addresses pre-college preparation for students in SME&T and the joint roles and responsibilities of faculty and administrators in arts and sciences and in schools of education to better educate teachers of K-12 mathematics, science, and technology. It suggests how colleges can improve and evaluate lower-division undergraduate courses for all students, strengthen institutional infrastructures to encourage quality teaching, and better prepare graduate students who will become future SME&T faculty.
Download or read book Reaching Students written by Nancy Kober and published by . This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Reaching Students presents the best thinking to date on teaching and learning undergraduate science and engineering. Focusing on the disciplines of astronomy, biology, chemistry, engineering, geosciences, and physics, this book is an introduction to strategies to try in your classroom or institution. Concrete examples and case studies illustrate how experienced instructors and leaders have applied evidence-based approaches to address student needs, encouraged the use of effective techniques within a department or an institution, and addressed the challenges that arose along the way."--Provided by publisher.
Download or read book Connecting Science and Engineering Education Practices in Meaningful Ways written by Leonard A. Annetta and published by Springer. This book was released on 2016-03-02 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for a scientifically literate citizenry, one that is able to think critically and engage productively in the engineering design process, has never been greater. By raising engineering design to the same level as scientific inquiry the Next Generation Science Standards’ (NGSS) have signaled their commitment to the integration of engineering design into the fabric of science education. This call has raised many critical questions...How well do these new standards represent what actually engineers do? Where do the deep connections among science and engineering practices lie? To what extent can (or even should) science and engineering practices co-exist in formal and informal educational spaces? Which of the core science concepts are best to leverage in the pursuit of coherent and compelling integration of engineering practices? What science important content may be pushed aside? This book, tackles many of these tough questions head on. All of the contributing authors consider the same core question: Given the rapidly changing landscape of science education, including the elevated status of engineering design, what are the best approaches to the effective integration of the science and engineering practices? They answered with rich descriptions of pioneering approaches, critical insights, and useful practical examples of how embodying a culture of interdisciplinarity and innovation can fuel the development of a scientifically literate citizenry . This collection of work builds traversable bridges across diverse research communities and begins to break down long standing disciplinary silos that have historically often hamstrung well-meaning efforts to bring research and practice from science and engineering together in meaningful and lasting ways.
Download or read book Improving How Universities Teach Science written by Carl Wieman and published by Harvard University Press. This book was released on 2017-05-22 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Too many universities remain wedded to outmoded ways of teaching. Too few departments ask whether what happens in their lecture halls is effective at helping students to learn and how they can encourage their faculty to teach better. But real change is possible, and Carl Wieman shows us how it can be done—through detailed, tested strategies.
Download or read book Teaching K 12 Science and Engineering During a Crisis written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2021-01-29 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: The COVID-19 pandemic is resulting in widespread and ongoing changes to how the K-12 education system functions, including disruptions to science teaching and learning environments. Students and teachers are all figuring out how to do schooling differently, and districts and states are working overtime to reimagine systems and processes. This is difficult and stressful work in the middle of the already stressful and sometimes traumatic backdrop of the global pandemic. In addition, students with disabilities, students of color, immigrants, English learners, and students from under-resourced communities have been disproportionately affected, both by the pandemic itself and by the resulting instructional shifts. Teaching K-12 Science and Engineering During a Crisis aims to describe what high quality science and engineering education can look like in a time of great uncertainty and to support practitioners as they work toward their goals. This book includes guidance for science and engineering practitioners - with an emphasis on the needs of district science supervisors, curriculum leads, and instructional coaches. Teaching K-12 Science and Engineering During a Crisis will help K-12 science and engineering teachers adapt learning experiences as needed to support students and their families dealing with ongoing changes to instructional and home environments and at the same time provide high quality in those experiences.
Download or read book Effective Science Teaching written by Brian E. Woolnough and published by . This book was released on 1994-01-01 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: Furthermore, Brian Woolnough argues that the best form of effective science teaching is through student research projects, in which students take a problem of personal concern to themselves and tackle it, worry at it, persevere in it and, meeting its challenges, produce their own solution. Such involvement in genuine scientific activity is, it is argued, not only possible in schools but essential if school science is to do justice to our students and to the scientific enterprise itself.
Download or read book Science and Engineering for Grades 6 12 written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2019-03-12 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is essential for today's students to learn about science and engineering in order to make sense of the world around them and participate as informed members of a democratic society. The skills and ways of thinking that are developed and honed through engaging in scientific and engineering endeavors can be used to engage with evidence in making personal decisions, to participate responsibly in civic life, and to improve and maintain the health of the environment, as well as to prepare for careers that use science and technology. The majority of Americans learn most of what they know about science and engineering as middle and high school students. During these years of rapid change for students' knowledge, attitudes, and interests, they can be engaged in learning science and engineering through schoolwork that piques their curiosity about the phenomena around them in ways that are relevant to their local surroundings and to their culture. Many decades of education research provide strong evidence for effective practices in teaching and learning of science and engineering. One of the effective practices that helps students learn is to engage in science investigation and engineering design. Broad implementation of science investigation and engineering design and other evidence-based practices in middle and high schools can help address present-day and future national challenges, including broadening access to science and engineering for communities who have traditionally been underrepresented and improving students' educational and life experiences. Science and Engineering for Grades 6-12: Investigation and Design at the Center revisits America's Lab Report: Investigations in High School Science in order to consider its discussion of laboratory experiences and teacher and school readiness in an updated context. It considers how to engage today's middle and high school students in doing science and engineering through an analysis of evidence and examples. This report provides guidance for teachers, administrators, creators of instructional resources, and leaders in teacher professional learning on how to support students as they make sense of phenomena, gather and analyze data/information, construct explanations and design solutions, and communicate reasoning to self and others during science investigation and engineering design. It also provides guidance to help educators get started with designing, implementing, and assessing investigation and design.
Download or read book Successful STEM Education written by National Research Council and published by National Academies Press. This book was released on 2011-10-15 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: What students learn about the science disciplines, technology, engineering, and mathematics during their K-12 schooling shapes their intellectual development, opportunities for future study and work, and choices of career, as well as their capacity to make informed decisions about political and civic issues and about their own lives. Most people share the vision that a highly capable STEM workforce and a population that understands and supports the scientific enterprise are key to the future place of the United States in global economics and politics and to the well-being of the nation. Indeed, the solutions to some of the most daunting problems facing the nation will require not only the expertise of top STEM professionals but also the wisdom and understanding of its citizens. Although much is known about why schools may not succeed, it is far less clear what makes STEM education effective. Successful STEM Education: A Workshop Summary discusses the importance of STEM education. The report describes the primary types of K-12 schools and programs that can support successful education in the STEM disciplines and examines data and research that demonstrate the effectiveness of these school types. It also summarizes research that helps to identify both the elements that make such programs effective and what is needed to implement these elements.
Download or read book The New Faculty Member written by Robert Boice and published by Jossey-Bass. This book was released on 1992-04-10 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the first time in decades, most American campuses are in the midst of hiring large groups of new faculty. As competition for the most qualified candidates increases, institutions must work harder than ever to attract and retain the best and most diverse prospects. This often requires investing considerable resources in recruitment and hiring--and makes it imperative that new hires are not lost to competitors or to unhappy or unproductive beginnings. In this book, Robert Boice offers a range of proven support strategies designed to help new faculty thrive--from campuswide programs for nurturing newcomers to projects that help them to help themselves. Boice identifies the major challenges facing most new faculty--teaching, scholarly writing, and simply fitting in as colleagues--and provides tested solutions for helping them cope. He outlines a structured mentoring program to build collegiality through social support networks. And he presents specific techniques for helping new faculty find time, fluency, and balance as writers, including advice on dealing with editorial evaluations or rejections. The author also details a variety of self-help projects, including exercise and mood management groups run largely by new faculty, as well as faculty handbooks and newsletters. And perhaps most important, he tells how to gain the crucial support of department chairs, deans, and other administrators, secure funds to get programs off the ground, and keep new programs manageable and successful.
Download or read book Building Capacity for Teaching Engineering in K 12 Education written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2020-04-13 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering education is emerging as an important component of US K-12 education. Across the country, students in classrooms and after- and out-of-school programs are participating in hands-on, problem-focused learning activities using the engineering design process. These experiences can be engaging; support learning in other areas, such as science and mathematics; and provide a window into the important role of engineering in society. As the landscape of K-12 engineering education continues to grow and evolve, educators, administrators, and policy makers should consider the capacity of the US education system to meet current and anticipated needs for K-12 teachers of engineering. Building Capacity for Teaching Engineering in K-12 Education reviews existing curricula and programs as well as related research to understand current and anticipated future needs for engineering-literate K-12 educators in the United States and determine how these needs might be addressed. Key topics in this report include the preparation of K-12 engineering educators, professional pathways for K-12 engineering educators, and the role of higher education in preparing engineering educators. This report proposes steps that stakeholders - including professional development providers, postsecondary preservice education programs, postsecondary engineering and engineering technology programs, formal and informal educator credentialing organizations, and the education and learning sciences research communities - might take to increase the number, skill level, and confidence of K-12 teachers of engineering in the United States.
Download or read book Promising Practices in Undergraduate Science Technology Engineering and Mathematics Education written by National Research Council and published by National Academies Press. This book was released on 2011-04-19 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerous teaching, learning, assessment, and institutional innovations in undergraduate science, technology, engineering, and mathematics (STEM) education have emerged in the past decade. Because virtually all of these innovations have been developed independently of one another, their goals and purposes vary widely. Some focus on making science accessible and meaningful to the vast majority of students who will not pursue STEM majors or careers; others aim to increase the diversity of students who enroll and succeed in STEM courses and programs; still other efforts focus on reforming the overall curriculum in specific disciplines. In addition to this variation in focus, these innovations have been implemented at scales that range from individual classrooms to entire departments or institutions. By 2008, partly because of this wide variability, it was apparent that little was known about the feasibility of replicating individual innovations or about their potential for broader impact beyond the specific contexts in which they were created. The research base on innovations in undergraduate STEM education was expanding rapidly, but the process of synthesizing that knowledge base had not yet begun. If future investments were to be informed by the past, then the field clearly needed a retrospective look at the ways in which earlier innovations had influenced undergraduate STEM education. To address this need, the National Research Council (NRC) convened two public workshops to examine the impact and effectiveness of selected STEM undergraduate education innovations. This volume summarizes the workshops, which addressed such topics as the link between learning goals and evidence; promising practices at the individual faculty and institutional levels; classroom-based promising practices; and professional development for graduate students, new faculty, and veteran faculty. The workshops concluded with a broader examination of the barriers and opportunities associated with systemic change.
Download or read book What the Best College Teachers Do written by Ken Bain and published by Harvard University Press. This book was released on 2011-09-01 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: What makes a great teacher great? Who are the professors students remember long after graduation? This book, the conclusion of a fifteen-year study of nearly one hundred college teachers in a wide variety of fields and universities, offers valuable answers for all educators. The short answer is—it’s not what teachers do, it’s what they understand. Lesson plans and lecture notes matter less than the special way teachers comprehend the subject and value human learning. Whether historians or physicists, in El Paso or St. Paul, the best teachers know their subjects inside and out—but they also know how to engage and challenge students and to provoke impassioned responses. Most of all, they believe two things fervently: that teaching matters and that students can learn. In stories both humorous and touching, Ken Bain describes examples of ingenuity and compassion, of students’ discoveries of new ideas and the depth of their own potential. What the Best College Teachers Do is a treasure trove of insight and inspiration for first-year teachers and seasoned educators.
Download or read book Science Teachers Learning written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2016-01-15 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Currently, many states are adopting the Next Generation Science Standards (NGSS) or are revising their own state standards in ways that reflect the NGSS. For students and schools, the implementation of any science standards rests with teachers. For those teachers, an evolving understanding about how best to teach science represents a significant transition in the way science is currently taught in most classrooms and it will require most science teachers to change how they teach. That change will require learning opportunities for teachers that reinforce and expand their knowledge of the major ideas and concepts in science, their familiarity with a range of instructional strategies, and the skills to implement those strategies in the classroom. Providing these kinds of learning opportunities in turn will require profound changes to current approaches to supporting teachers' learning across their careers, from their initial training to continuing professional development. A teacher's capability to improve students' scientific understanding is heavily influenced by the school and district in which they work, the community in which the school is located, and the larger professional communities to which they belong. Science Teachers' Learning provides guidance for schools and districts on how best to support teachers' learning and how to implement successful programs for professional development. This report makes actionable recommendations for science teachers' learning that take a broad view of what is known about science education, how and when teachers learn, and education policies that directly and indirectly shape what teachers are able to learn and teach. The challenge of developing the expertise teachers need to implement the NGSS presents an opportunity to rethink professional learning for science teachers. Science Teachers' Learning will be a valuable resource for classrooms, departments, schools, districts, and professional organizations as they move to new ways to teach science.
Download or read book Teaching Engineering Second Edition written by Phillip C. Wankat and published by Purdue University Press. This book was released on 2015-01-15 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: The majority of professors have never had a formal course in education, and the most common method for learning how to teach is on-the-job training. This represents a challenge for disciplines with ever more complex subject matter, and a lost opportunity when new active learning approaches to education are yielding dramatic improvements in student learning and retention. This book aims to cover all aspects of teaching engineering and other technical subjects. It presents both practical matters and educational theories in a format useful for both new and experienced teachers. It is organized to start with specific, practical teaching applications and then leads to psychological and educational theories. The "practical orientation" section explains how to develop objectives and then use them to enhance student learning, and the "theoretical orientation" section discusses the theoretical basis for learning/teaching and its impact on students. Written mainly for PhD students and professors in all areas of engineering, the book may be used as a text for graduate-level classes and professional workshops or by professionals who wish to read it on their own. Although the focus is engineering education, most of this book will be useful to teachers in other disciplines. Teaching is a complex human activity, so it is impossible to develop a formula that guarantees it will be excellent. However, the methods in this book will help all professors become good teachers while spending less time preparing for the classroom. This is a new edition of the well-received volume published by McGraw-Hill in 1993. It includes an entirely revised section on the Accreditation Board for Engineering and Technology (ABET) and new sections on the characteristics of great teachers, different active learning methods, the application of technology in the classroom (from clickers to intelligent tutorial systems), and how people learn.
