Download or read book Laser Precision Microfabrication written by Koji Sugioka and published by Springer. This book was released on 2010-08-13 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Miniaturization and high precision are rapidly becoming a requirement for many industrial processes and products. As a result, there is greater interest in the use of laser microfabrication technology to achieve these goals. This book composed of 16 chapters covers all the topics of laser precision processing from fundamental aspects to industrial applications to both inorganic and biological materials. It reviews the sate of the art of research and technological development in the area of laser processing.
Download or read book Microreaction Technology written by M. Matlosz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: IMRET 5 featured more than 80 oral and poster communications, covering the entire interdisciplinary field from design, production, modeling and characterization of microreactor devices to application of microstructured systems for production, energy and transportation, including many analytical and biological applications. A particularly strong topic was the investigation of the potential of microstructuring of reactors and systems components for process intensification. Perspectives of combining local, in situ, data acquisition with appropriate microstructuring of actuators and components within chemical and biological devices were explored in order to enhance process performance and facilitate process control.
Download or read book Carbon Nanotubes written by M. Meyyappan and published by CRC Press. This book was released on 2004-07-28 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes, with their extraordinary mechanical and unique electronic properties, have garnered much attention in the past five years. With a broad range of potential applications including nanoelectronics, composites, chemical sensors, biosensors, microscopy, nanoelectromechanical systems, and many more, the scientific community is more moti
Download or read book Advanced Electrocatalysts for Low Temperature Fuel Cells written by Francisco Javier Rodríguez-Varela and published by Springer. This book was released on 2018-10-09 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the reader to the state of the art in nanostructured anode and cathode electrocatalysts for low-temperature acid and alkaline fuel cells. It explores the electrocatalysis of anode (oxidation of organic molecules) and cathode (oxygen reduction) reactions. It also offers insights into metal-carbon interactions, correlating them with the catalytic activity of the electrochemical reactions. The book explores the electrocatalytic behaviour of materials based on noble metals and their alloys, as well as metal-metal oxides and metal-free nanostructures. It also discusses the surface and structural modification of carbon supports to enhance the catalytic activity of electrocatalysts for fuel-cell reactions.
Download or read book Recent Advances in Mechatronics written by Ryszard Jablonski and published by Springer Science & Business Media. This book was released on 2007-09-19 with total page 709 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent state of advances in mechatronics presented on the 7th International Conference Mechatronics 2007, hosted at the Faculty of Mechatronics, Warsaw University of Technology, Poland. The selected papers give an overview of the state-of-the-art and present new research results and prospects of the future development in this interdisciplinary field of mechatronic systems.
Download or read book Micro Fuel Cells written by Tim Zhao and published by Academic Press. This book was released on 2009-07-07 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today's consumers of portable electronics consumers are demanding devices not only deliver more power but also work healthy for the environment. This fact alone has lead major corporations like Intel, BIC, Duracell and Microsoft to believe that Microfuel Cells could be the next-generation power source for electronic products. Compact and readable, Microfuels Principles and Applications, offers engineers and product designers a reference unsurpassed by any other in the market. The book starts with a clear and rigorous exposition of the fundamentals engineering principles governing energy conversion for small electronic devices, followed by self-contained chapters concerning applications. The authors provide original points of view on all types of commercially available micro fuel cells types, including micro proton exchange membrane fuel cells, micro direct methanol fuel cells, micro solid oxide fuel cells and micro bio-fuel cells. The book also contains a detailed introduction to the fabrication of the components and the assembly of the system, making it a valuable reference both in terms of its application to product design and understanding micro engineering principles. - An overview of the micro fuel cell systems and applications - A detailed introduction to the fabrication of the components and the assembly of the system - Original points of view on prospects of micro fuel cells
Download or read book Biosensing for the 21st Century written by Fred Lisdat and published by Springer. This book was released on 2007-11-20 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions by numerous experts
Download or read book Global Electronic Commerce written by J. Christopher Westland and published by MIT Press. This book was released on 1999 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an understanding of the technologies of electronic commerce. The text does not concentrate solely on the Internet but suggests that the Internet is only a bridge technology. Each chapter contains an overview of a theory or practice followed by one or more business case studies.
Download or read book Algorithms in Ambient Intelligence written by W. Verhaegh and published by Springer Science & Business Media. This book was released on 2004 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the outcome of a series of discussions at the Philips Symposium on Intelligent Algorithms, which was held in Eindhoven on December 2002. It contains many exciting and practical examples from this newly developing research field, which can be positioned at the intersection of computer science, discrete mathematics, and artificial intelligence. The examples include machine learning, content management, vision, speech, content augmentation, profiling, music retrieval, feature extraction, audio and video fingerprinting, resource management, multimedia servers, network scheduling, and IC design.
Download or read book Ambient Intelligence written by Werner Weber and published by Springer Science & Business Media. This book was released on 2005-12-12 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ambient intelligence is the vision of a technology that will become invisibly embedded in our natural surroundings, present whenever we need it, enabled by simple and effortless interactions, attuned to all our senses, adaptive to users and context-sensitive, and autonomous. High-quality information access and personalized content must be available to everybody, anywhere, and at any time. This book addresses ambient intelligence used to support human contacts and accompany an individual's path through the complicated modern world. From the technical standpoint, distributed electronic intelligence is addressed as hardware vanishing into the background. Devices used for ambient intelligence are small, low-power, low weight, and (very importantly) low-cost; they collaborate or interact with each other; and they are redundant and error-tolerant. This means that the failure of one device will not cause failure of the whole system. Since wired connections often do not exist, radio methods will play an important role for data transfer. This book addresses various aspects of ambient intelligence, from applications that are imminent since they use essentially existing technologies, to ambitious ideas whose realization is still far away, due to major unsolved technical challenges.
Download or read book Nanostructures written by Christophe Jean Delerue and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides the theoretical background needed by physicists, engineers and students to simulate nano-devices, semiconductor quantum dots and molecular devices. It presents in a unified way the theoretical concepts, the more recent semi-empirical and ab initio methods, and their application to experiments. The topics include quantum confinement, dielectric and optical properties, non-radiative processes, defects and impurities, and quantum transport. This guidebook not only provides newcomers with an accessible overview (requiring only basic knowledge of quantum mechanics and solid-state physics) but also provides active researchers with practical simulation tools.
Download or read book Optimization of Manufacturing Processes written by Kapil Gupta and published by Springer. This book was released on 2019-06-25 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a detailed understanding of optimization methods as they are implemented in a variety of manufacturing, fabrication and machining processes. It covers the implementation of statistical methods, multi-criteria decision making methods and evolutionary techniques for single and multi-objective optimization to improve quality, productivity, and sustainability in manufacturing. It reports on the theoretical aspects, special features, recent research and latest development in the field. Optimization of Manufacturing Processes is a valuable source of information for researchers and practitioners, as it fills the gap where no dedicated book is available on intelligent manufacturing/modeling and optimization in manufacturing. Readers will develop an understanding of the implementation of statistical and evolutionary techniques for modeling and optimization in manufacturing.
Download or read book The Printed Circuit Designer s Guide To DFM written by David Marrakchi and published by . This book was released on 2017-02-28 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an in-depth look at DFM: what DFM entails, why it's so critical today, and how to implement the DFM techniques necessary to produce a manufacturable and functional board. With something to offer for both the seasoned designer and the newbie, after reading this book, PCB designers will have all the DFM knowledge they need to eliminate costly design re-spins and get a good board back, every time.
Download or read book Management by Listening written by R. Poornalingam and published by Unicorn Books Pvt Ltd. This book was released on 2008 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the hitherto sidelined but key aspect of Management - Listening to one's customers. It highlights this quality as an asset and tries to establish its importance as a wonderful Management resource. Based on real-life management experiences, it particularly enlists numerous advantages of how Listening can enhance the output, customer satisfaction and the performance of an organisation. the book also envelops an enriching inventory of unique and innovative solutions apart from various experiences acquired in the public sector. Numerous aspects of management and administration have also been incorporated herein. It is a treasure of management principles and practices and a wonderful inspiration to all managers, both budding and seasoned. A vivid description of actual anecdotes and examples from public and private sector enhances its overall utility and applicability. Written in a simple conversational style, the book is easy to read, leaving a clear and distinctive impression on the reader.
Download or read book Introduction to Micromachining written by Vinod Kumar Jain and published by Alpha Science International, Limited. This book was released on 2014-05-29 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Micromachining discusses the working principles, the laboratory models developed and the applications of different individual micromachining processes. It basically deals with two classes of u-machining processes: First category deals with those processes used for shaping and sizing of microproducts and macroproducts, for example, electrochemical micromachining, electrodischarge micromachining, laser beam micromachining, diamond turning etc. The second class of u-machining processes includes u-/ nano-finishing techniques useful for both u and macro products. These processes include abrasive flow machining, magnetic abrasive finishing, magnetic float polishing, etc. This book is an outcome of joint efforts by a group of Professors and Researchers from the renowned institutions from different countries, involved in high level research in related areas. They have written chapters in this book useful for the undergraduate and postgraduate students as a text book, and as a reference book for those involved in the research work in u-machining area.NEW TO THE SECOND EDITION: Eight new chapters Review questions to help both the teachers and students Solved problems, objective questions, multiple choice questions and short questions These facets of the second edition of the book make it a suitable textbook.
Download or read book Handbook of Industrial Diamonds and Diamond Films written by Mark A. Prelas and published by Routledge. This book was released on 2018-12-19 with total page 1232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines both mined and synthetic diamonds and diamond films. The text offers coverage on the use of diamond as an engineering material, integrating original research on the science, technology and applications of diamond. It discusses the use of chemical vapour deposition grown diamonds in electronics, cutting tools, wear resistant coatings, thermal management, optics and acoustics, as well as in new products.
Download or read book Experimental Business Research written by Rami Zwick and published by Springer Science & Business Media. This book was released on 2007-02-26 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is one of the few titles that brings together studies that adopt laboratory based experimental economics methods to study an array of business and policy issues, spanning the entire business domain, including accounting, economics, management, marketing and cognitive science.
