Download or read book Study the Power Flow Control of a Power System with Unified Power Flow Controller written by Vakula Peesari and published by . This book was released on 2010 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical power systems is a large interconnected network that requires a careful design to maintain the system with continuous power flow operation without any limitations. Flexible Alternating Current Transmission System (FACTS) is an application of a power electronics device to control the power flow and to improve the system stability of a power system. Unified Power Flow Controller (UPFC) is a versatile device in the FACTS family of controllers which has the ability to simultaneously control all the transmission parameters of power systems i.e. voltage, impedance and phase angle which determines the power flow of a transmission line. This project proposes a case study to control the power flow of a power system with UPFC. In this study, I am considering a standard 5-bus network for the analysis. Power flow equations are solved using Newton Raphson's algorithm and the simulations of the algorithm are done in MATLAB. The results of the network with and without UPFC are compared in terms of active and reactive power flow in the transmission line at the bus to analyze the performance of UPFC.

Download or read book Power Flow Control Solutions for a Modern Grid Using SMART Power Flow Controllers written by Kalyan K. Sen and published by John Wiley & Sons. This book was released on 2021-12-13 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Flow Control Solutions for a Modern Grid using SMART Power Flow Controllers Provides students and practicing engineers with the foundation required to perform studies of power system networks and mitigate unique power flow problems Power Flow Control Solutions for a Modern Grid using SMART Power Flow Controllers is a clear and accessible introduction to power flow control in complex transmission systems. Starting with basic electrical engineering concepts and theory, the authors provide step-by-step explanations of the modeling techniques of various power flow controllers (PFCs), such as the voltage regulating transformer (VRT), the phase angle regulator (PAR), and the unified power flow controller (UPFC). The textbook covers the most up-to-date advancements in the Sen transformer (ST), including various forms of two-core designs and hybrid architectures for a wide variety of applications. Beginning with an overview of the origin and development of modern power flow controllers, the authors explain each topic in straightforward engineering terms—corroborating theory with relevant mathematics. Throughout the text, easy-to-understand chapters present characteristic equations of various power flow controllers, explain modeling in the Electromagnetic Transients Program (EMTP), compare transformer-based and mechanically-switched PFCs, discuss grid congestion and power flow limitations, and more. This comprehensive textbook: Describes why effective Power Flow Controllers should be viewed as impedance regulators Provides computer simulation codes of the various power flow controllers in the EMTP programming language Contains numerous worked examples and data cases to clarify complex issues Includes results from the simulation study of an actual network Features models based on the real-world experiences the authors, co-inventors of first-generation FACTS controllers Written by two acknowledged leaders in the field, Power Flow Control Solutions for a Modern Grid using SMART Power Flow Controllers is an ideal textbook for graduate students in electrical engineering, and a must-read for power engineering practitioners, regulators, and researchers.

Download or read book Study of Power Flow Control by Unified Power Flow Controller written by Chien Meng Yam and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Optimal Control Schemes for Power System with Unified Power Flow Controller UPFC written by Dr. Hidaia Mahmood Alassouli and published by Dr. Hidaia Mahmood Alassouli. This book was released on 2021-04-18 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: FACTS are one aspect of power electronics revolution that is taking place in all areas of electrical energy. A variable of powerful semiconductor devices not only offer the advantage of high speed and reliability of switching but, more importantly, the opportunity offered by a variety of innovative circuit concepts based on these power devices enhance the value of electric energy. In generation area, the potential application of power electronics is largely in renewable generation. Photovoltaic and fuel cells requires conversion of dc to ac. Generation with variable speed is necessary for economic viability of wind and small hydro generators. Variable-speed wind generators and small hydro generators requires conversion of variable frequency ac to power system frequency. These applications of power electronics in renewable generation area require converter sizes in the range of few kilowatts to few megawatts. In coming decades, electrical energy storage is expected to be widely used in power systems as capacitor, battery and superconducting magnet technologies move forward. Batteries are widely used already for emergency power supplies. These require ac/dc/ac converters in the range of a few kilowatts to a few tens of megawatts. On the other hand, variable speed hydro storage requires converters of up to a few hundred megawatts. In transmission area, application of power electronics consists of High Voltage Direct Current (HVDC) power transmission and FACTS. HVDC is often an economical way to interconnect certain power systems, which are suited in different regions separated by long distances or those have different frequencies or incompatible frequency control. HVDC involves conversion of ac to dc at one end and conversion of dc to ac at the other end. What is most interesting for transmission planners is that FACTS opens up new opportunities for controlling power and enhancing the usable capacity of the lines. The possibility that current through a line can be controlled at reasonable cost enables a large potential of increasing the capacity of the existing lines with larger conductors, and use one of the FACTS controllers to enable corresponding power to flow through lines under normal and contingency conditions. These opportunities arise through the ability of FACTS controllers to control the interrelated parameters that govern the operation of transmission line including series impedance, shunt impedance, current, voltage, phase angle, and the damping of oscillations at various frequencies below the rated frequency. In distribution area, an exciting opportunity called Custom Power. The custom power concept incorporates power electronics controllers and switching equipment, one or more of which can be used to provide a value-added service to the customers. In general, these custom service applications represent power electronics in the range of few tens of kilowatts to few ten of megawatts of conversion or switching equipment between the utility supply and customer. On the end-user side, power electronics conversion and switching technology has been fast growing area. Complementing the Custom Power technology is the whole area of power conditioning technology used by customers, under the term Power Quality. Uninterruptible power supplies (UPS) and voltage regulators represent the major growth area in power electronics. In end use, the converter sizes range from a few watts to ten of megawatts. The term active filter is a general one and is applied to a group of power electronic circuits incorporating power switching devices and passive energy storage circuit elements such as inductors and capacitors. The functions of these circuits vary depending on the applications. They are generally used for controlling current harmonics in supply networks at the low and medium voltage distribution level or for reactive power and/or voltage control at high voltage distribution level. These functions may be combined in a single circuit or in separate active filters. Most of the control schemes introduced in the existing papers were designed either for eliminating current harmonics or eliminating voltage flickers or for load flow control. So, this work is devoted to find a proper optimal control schemes for a system with series or shunt or series and shunt converters that can provide all functions together. Various optimal control schemes will be designed for systems with series, shunt and series-shunt converters with the objective to control the load flow through a lines and to eliminate current harmonics and voltage flickers with different strategies for tracking. · Part 1: Gives the description of optimal control design. · Part 2: Case studies to design different optimal control schemes for system with UPFC unit to control the power flow, eliminate voltage flicker and eliminate current harmonics. The case studies were repeated for system with only series or shunt converters.

Download or read book Unified Power Flow Controller Technology and Application written by Jijun Yin and published by Academic Press. This book was released on 2017-06-16 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unified Power Flow Controller Technology and Application provides comprehensive coverage on UPFC technology, providing a range of topics, including design principle, control and protection, and insulation coordination. It summarizes all the most up-to-date research and practical achievements that are related to UPFC and MMC technology, including test techniques for main components, closed-loop test techniques for control and protection systems, and onsite techniques for implementing UPFC projects. The book is an essential reference book for both academics and engineers working in power system protection control, power system planning engineers, and HVDC FACTS related areas. Readers will not only obtain the detailed information regarding theoretical analysis and practical application of UPFC, but also the control mechanism of advanced MMC technology, both of which are not common topics in previously published books. Shows how to use modular multilevel converters (MMC) to implement UPFC that lead to cost-effective and reliable systems Draws from the most up-to-date research and practical applications Teaches electromechanical/electromagnetic transient simulation techniques and real-time closed-loop simulation test techniques of the MMC based UPFC

Download or read book 2006 Proceedings of the Eleventh International Middle East Power Systems Conference written by IEEE Staff and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Flexible AC Transmission Systems written by Bjarne R. Andersen and published by Springer. This book was released on 2020-07-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Green Book offers the outstanding expertise of CIGRE professionals about Flexible AC Transmission Systems (FACTS) in one concise handbook. FACTS are used to enhance AC power networks, by providing fast control of power flows and AC voltage and AC phase angles. They can be used to defer the need for additional power lines, by controlling the power flow on lines to achieve maximum utilisation of the existing lines, and/or by improving the power quality, e.g. when large disturbing loads are connected to the network. This Green Book on FACTS provides comprehensive information about the use of Power Electronics for AC system control and for Power Quality Improvement in its over 1000 pages. This book has been written by experts in the field, who come from Transmission System Operators, Network owners, manufacturers, and consultants in this field. This Green Book on FACTS covers a large range of topics in its 6 sections, as follows: AC Systems Characteristics, AC network control using conventional means and AC network control using FACTS Controllers Technical Descriptions of all current FACTS controllers, power electronic Topologies for FACTS, SVCs, STATCOM, TCSC and the UPFC and its variations Application Examples of all FACTS controllers, which include a description of controllers using saturation of iron as well as examples of all current FACTS controllers Planning and Procurement, including economic appraisals and cost benefit analysis, planning studies, environmental considerations, functional specifications Implementation of FACTS controllers, including integration and design studies, equipment design and testing and commissioning FACTS operation and lifetime management.

Download or read book A Unified Power Flow Controller Model Study written by Juan C. Etheridge and published by . This book was released on 1999 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Optimal Control Schemes for Power System with Unified Power Flow Controller UPFC written by Hedaya Mahmood Alasooly and published by . This book was released on 2021-03-18 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: What is most interesting for transmission planners is that FACTS opens up new opportunities for controlling power and enhancing the usable capacity of the lines. The possibility that current through a line can be controlled at reasonable cost enables a large potential of increasing the capacity of the existing lines with larger conductors, and use one of the FACTS controllers to enable corresponding power to flow through lines under normal and contingency conditions. These opportunities arise through the ability of FACTS controllers to control the interrelated parameters that govern the operation of transmission line including series impedance, shunt impedance, current, voltage, phase angle, and the damping of oscillations at various frequencies below the rated frequency. In distribution area, an exciting opportunity called Custom Power. The custom power concept incorporates power electronics controllers and switching equipment, one or more of which can be used to provide a value-added service to the customers. In general, these custom service applications represent power electronics in the range of few tens of kilowatts to few ten of megawatts of conversion or switching equipment between the utility supply and customer. On the end-user side, power electronics conversion and switching technology has been fast growing area. Complementing the Custom Power technology is the whole area of power conditioning technology used by customers, under the term Power Quality. Uninterruptible power supplies (UPS) and voltage regulators represent the major growth area in power electronics. In end use, the converter sizes range from a few watts to ten of megawatts. The term active filter is a general one and is applied to a group of power electronic circuits incorporating power switching devices and passive energy storage circuit elements such as inductors and capacitors. The functions of these circuits vary depending on the applications. They are generally used for controlling current harmonics in supply networks at the low and medium voltage distribution level or for reactive power and/or voltage control at high voltage distribution level. These functions may be combined in a single circuit or in separate active filters. Most of the control schemes introduced in the existing papers were designed either for eliminating current harmonics or eliminating voltage flickers or for load flow control. So, this work is devoted to find a proper optimal control schemes for a system with series or shunt or series and shunt converters that can provide all functions together. Various optimal control schemes will be designed for systems with series, shunt and series-shunt converters with the objective to control the load flow through a lines and to eliminate current harmonics and voltage flickers with different strategies for tracking. - Part 1: Gives the description of optimal control design. - Part 2: Case studies to design different optimal control schemes for system with UPFC unit to control the power flow, eliminate voltage flicker and eliminate current harmonics. The case studies were repeated for system with only series or shunt converters.

Download or read book Power System Performance Enhancement Using Unified Power Flow Controller written by Harinder Sawhney and published by . This book was released on 2002 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Flexible AC Transmission Systems Modelling and Control written by Xiao-Ping Zhang and published by Springer Science & Business Media. This book was released on 2012-02-24 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: The extended and revised second edition of this successful monograph presents advanced modeling, analysis and control techniques of Flexible AC Transmission Systems (FACTS). The book covers comprehensively a range of power-system control problems: from steady-state voltage and power flow control, to voltage and reactive power control, to voltage stability control, to small signal stability control using FACTS controllers. In the six years since the first edition of the book has been published research on the FACTS has continued to flourish while renewable energy has developed into a mature and booming global green business. The second edition reflects the new developments in converter configuration, smart grid technologies, super power grid developments worldwide, new approaches for FACTS control design, new controllers for distribution system control, and power electronic controllers in wind generation operation and control. The latest trends of VSC-HVDC with multilevel architecture have been included and four completely new chapters have been added devoted to Multi-Agent Systems for Coordinated Control of FACTS-devices, Power System Stability Control using FACTS with Multiple Operating Points, Control of a Looping Device in a Distribution System, and Power Electronic Control for Wind Generation.

Download or read book Optimal Control Schemes for Power System with Unified Power Flow Controller UPFC written by Alassouli Dr. Hidaia Mahmood Alassouli and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applications of Unified Power Flow Controllers in Power System Stability Enhancement written by Surachai Limyingcharoen and published by . This book was released on 1999 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 2745 4 2022 IEEE Guide for Technology of Unified Power Flow Controller Using Modular Multilevel Converter Part 4 Control and Protection Application written by and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book VSC FACTS HVDC written by Enrique Acha and published by John Wiley & Sons. This book was released on 2019-08-05 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: An authoritative reference on the new generation of VSC-FACTS and VSC-HVDC systems and their applicability within current and future power systems VSC-FACTS-HVDC and PMU: Analysis, Modelling and Simulation in Power Grids provides comprehensive coverage of VSC-FACTS and VSC-HVDC systems within the context of high-voltage Smart Grids modelling and simulation. Readers are presented with an examination of the advanced computer modelling of the VSC-FACTS and VSC-HVDC systems for steady-state, optimal solutions, state estimation and transient stability analyses, including numerous case studies for the reader to gain hands-on experience in the use of models and concepts. Key features: Wide-ranging treatment of the VSC achieved by assessing basic operating principles, topology structures, control algorithms and utility-level applications. Detailed advanced models of VSC-FACTS and VSC-HVDC equipment, suitable for a wide range of power network-wide studies, such as power flows, optimal power flows, state estimation and dynamic simulations. Contains numerous case studies and practical examples, including cases of multi-terminal VSC-HVDC systems. Includes a companion website featuring MATLAB software and Power System Computer Aided Design (PSCAD) scripts which are provided to enable the reader to gain hands-on experience. Detailed coverage of electromagnetic transient studies of VSC-FACTS and VSC-HVDC systems using the de-facto industry standard PSCAD/EMTDC simulation package. An essential guide for utility engineers, academics, and research students as well as industry managers, engineers in equipment design and manufacturing, and consultants.

Download or read book Investigation of Advanced Control for the Unified Power Flow Controller UPFC written by Mohamed Emad Eldin Abdelhady Farrag and published by . This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Electronics and Signal Processing written by Wensong Hu and published by Springer Science & Business Media. This book was released on 2011-06-21 with total page 1015 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes extended and revised versions of a set of selected papers from the International Conference on Electric and Electronics (EEIC 2011) , held on June 20-22 , 2011, which is jointly organized by Nanchang University, Springer, and IEEE IAS Nanchang Chapter. The objective of EEIC 2011 Volume 1 is to provide a major interdisciplinary forum for the presentation of new approaches from Electronics and Signal Processing, to foster integration of the latest developments in scientific research. 133 related topic papers were selected into this volume. All the papers were reviewed by 2 program committee members and selected by the volume editor Prof. Wensong Hu. We hope every participant can have a good opportunity to exchange their research ideas and results and to discuss the state of the art in the areas of the Electronics and Signal Processing.