Download or read book Study on the Origin of 1 f in Bulk Acoustic Wave Resonators written by Santunu Ghosh and published by . This book was released on 2014 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since a few decades, frequency control technology has been at the heart of modern day electronics due to its huge areaof applications in communication systems, computers, navigation systems or military defense. Frequency controldevices provide high frequency stabilities and spectral purities in the short term domain. However, improvement of theperformance of these devices, in terms of frequency stability, remains a big challenge for researchers. Reducing noise inorder to increase the short term stability and avoid unwanted switching between channels is thus very desirable. It iscommonly admitted that the fundamental limitation to this short-term stability is due to flicker frequency noise in theresonators. In this manuscript, a first chapter recalls some basic facts about acoustic, crystallography and definitions oftime and frequency domain needed to explore ultra-stable resonators and oscillators. The second chapter is devoted to asummary of the literature on flicker frequency noise. Then, the third chapter concerns our studies on Handel's quantum1/f noise model, which although criticized by many, is still the only one that provides an estimation of the flooramplitude of 1/f noise that is not invalidated by experimental data. In the fourth chapter, another approach, based on thefluctuation-dissipation theorem, is used in order to put numerical constraints on a model of 1/f noise caused by aninternal (or structural) dissipation proportional to the amplitude and not to the speed. The last chapter is devoted toexperimental results. An ultra-stable resonator used during this study is described. Phase noise measurements on severalbatches of resonators are given. Measurements of resonator parameters have been done at low temperature in order tocorrelate them with noise results. Another approach with a procedure that use transient pseudo periodic oscillations andput to their limits the capacities of presently available digital oscilloscopes, is presented, in order to assess rapidly thequality of various resonators. Finally, conclusions and perspectives are given.
Download or read book RF Bulk Acoustic Wave Filters for Communications written by Ken-ya Hashimoto and published by Artech House. This book was released on 2009 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This timely book presents a thorough overview of RF BAW filters, covering a vast range of technologies, optimal device design, filter topologies, packaging, fabrication processes, and high quality piezoelectric thin films. Moreover, the book discusses the integration of BAW filters in RF systems.
Download or read book Tuneable Film Bulk Acoustic Wave Resonators written by Spartak Gevorgian and published by Springer Science & Business Media. This book was released on 2013-02-01 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: To handle many standards and ever increasing bandwidth requirements, large number of filters and switches are used in transceivers of modern wireless communications systems. It makes the cost, performance, form factor, and power consumption of these systems, including cellular phones, critical issues. At present, the fixed frequency filter banks based on Film Bulk Acoustic Resonators (FBAR) are regarded as one of the most promising technologies to address performance -form factor-cost issues. Even though the FBARs improve the overall performances the complexity of these systems remains high.a Attempts are being made to exclude some of the filters by bringing the digital signal processing (including channel selection) as close to the antennas as possible. However handling the increased interference levels is unrealistic for low-cost battery operated radios. Replacing fixed frequency filter banks by one tuneable filter is the most desired and widely considered scenario. As an example, development of the software based cognitive radios is largely hindered by the lack of adequate agile components, first of all tuneable filters. In this sense the electrically switchable and tuneable FBARs are the most promising components to address the complex cost-performance issues in agile microwave transceivers, smart wireless sensor networks etc.Tuneable Film Bulk Acoustic Wave Resonators discusses FBAR need, physics, designs, modelling, fabrication and applications. Tuning of the resonant frequency of the FBARs is considered. Switchable and tuneable FBARs based on electric field induced piezoelectric effect in paraelectric phase ferroelectrics are covered. The resonance of these resonators may be electrically switched on and off and tuned without hysteresis.The book is aimed at microwave and sensor specialists in the industry and graduate students. Readers will learn about principles of operation and possibilities of the switchable and tuneable FBARs, and will be given general guidelines for designing, fabrication and applications of these devices."
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Piezoelectric Sensors written by Peter Lieberzeit and published by Springer Nature. This book was released on with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Understanding Acoustics written by Steven L. Garrett and published by Springer. This book was released on 2017-02-24 with total page 913 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides a unified approach to acoustics and vibration suitable for use in advanced undergraduate and first-year graduate courses on vibration and fluids. The book includes thorough treatment of vibration of harmonic oscillators, coupled oscillators, isotropic elasticity, and waves in solids including the use of resonance techniques for determination of elastic moduli. Drawing on 35 years of experience teaching introductory graduate acoustics at the Naval Postgraduate School and Penn State, the author presents a hydrodynamic approach to the acoustics of sound in fluids that provides a uniform methodology for analysis of lumped-element systems and wave propagation that can incorporate attenuation mechanisms and complex media. This view provides a consistent and reliable approach that can be extended with confidence to more complex fluids and future applications. Understanding Acoustics opens with a mathematical introduction that includes graphing and statistical uncertainty, followed by five chapters on vibration and elastic waves that provide important results and highlight modern applications while introducing analytical techniques that are revisited in the study of waves in fluids covered in Part II. A unified approach to waves in fluids (i.e., liquids and gases) is based on a mastery of the hydrodynamic equations. Part III demonstrates extensions of this view to nonlinear acoustics. Engaging and practical, this book is a must-read for graduate students in acoustics and vibration as well as active researchers interested in a novel approach to the material.
Download or read book Piezoelectric MEMS Resonators written by Harmeet Bhugra and published by Springer. This book was released on 2017-01-09 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces piezoelectric microelectromechanical (pMEMS) resonators to a broad audience by reviewing design techniques including use of finite element modeling, testing and qualification of resonators, and fabrication and large scale manufacturing techniques to help inspire future research and entrepreneurial activities in pMEMS. The authors discuss the most exciting developments in the area of materials and devices for the making of piezoelectric MEMS resonators, and offer direct examples of the technical challenges that need to be overcome in order to commercialize these types of devices. Some of the topics covered include: Widely-used piezoelectric materials, as well as materials in which there is emerging interest Principle of operation and design approaches for the making of flexural, contour-mode, thickness-mode, and shear-mode piezoelectric resonators, and examples of practical implementation of these devices Large scale manufacturing approaches, with a focus on the practical aspects associated with testing and qualification Examples of commercialization paths for piezoelectric MEMS resonators in the timing and the filter markets ...and more! The authors present industry and academic perspectives, making this book ideal for engineers, graduate students, and researchers.
Download or read book MEMS based Circuits and Systems for Wireless Communication written by Christian C Enz and published by Springer Science & Business Media. This book was released on 2012-08-21 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: MEMS-based Circuits and Systems for Wireless Communications provides comprehensive coverage of RF-MEMS technology from device to system level. This edited volume places emphasis on how system performance for radio frequency applications can be leveraged by Micro-Electro-Mechanical Systems (MEMS). Coverage also extends to innovative MEMS-aware radio architectures that push the potential of MEMS technology further ahead. This work presents a broad overview of the technology from MEMS devices (mainly BAW and Si MEMS resonators) to basic circuits, such as oscillators and filters, and finally complete systems such as ultra-low-power MEMS-based radios. Contributions from leading experts around the world are organized in three parts. Part I introduces RF-MEMS technology, devices and modeling and includes a prospective outlook on ongoing developments towards Nano-Electro-Mechanical Systems (NEMS) and phononic crystals. Device properties and models are presented in a circuit oriented perspective. Part II focusses on design of electronic circuits incorporating MEMS. Circuit design techniques specific to MEMS resonators are applied to oscillators and active filters. In Part III contributors discuss how MEMS can advantageously be used in radios to increase their miniaturization and reduce their power consumption. RF systems built around MEMS components such as MEMS-based frequency synthesis including all-digital PLLs, ultra-low power MEMS-based communication systems and a MEMS-based automotive wireless sensor node are described.
Download or read book Handbook of Silicon Based MEMS Materials and Technologies written by Markku Tilli and published by Elsevier. This book was released on 2020-04-17 with total page 1028 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Silicon Based MEMS Materials and Technologies, Third Edition is a comprehensive guide to MEMS materials, technologies, and manufacturing with a particular emphasis on silicon as the most important starting material used in MEMS. The book explains the fundamentals, properties (mechanical, electrostatic, optical, etc.), materials selection, preparation, modeling, manufacturing, processing, system integration, measurement, and materials characterization techniques of MEMS structures. The third edition of this book provides an important up-to-date overview of the current and emerging technologies in MEMS making it a key reference for MEMS professionals, engineers, and researchers alike, and at the same time an essential education material for undergraduate and graduate students. Provides comprehensive overview of leading-edge MEMS manufacturing technologies through the supply chain from silicon ingot growth to device fabrication and integration with sensor/actuator controlling circuits Explains the properties, manufacturing, processing, measuring and modeling methods of MEMS structures Reviews the current and future options for hermetic encapsulation and introduces how to utilize wafer level packaging and 3D integration technologies for package cost reduction and performance improvements Geared towards practical applications presenting several modern MEMS devices including inertial sensors, microphones, pressure sensors and micromirrors
Download or read book Government Reports Announcements written by and published by . This book was released on 1974 with total page 1000 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 1998 IEEE Ultrasonics Symposium Proceedings written by Ultrasonics Symposium and published by . This book was released on 1998 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Acoustic Wave Devices in Telecommunications written by Ken-Ya Hashimoto and published by Springer Science & Business Media. This book was released on 2000-06-21 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface acoustic wave (SAW) devices are widely used in mobile communications, a rapidly evolving market. This book gives an overview on the latest SAW technologies with an emphasis on the design and simulation of devices, such as resonator-based devices employing the SH-type leaky SAW.
Download or read book Index Medicus written by and published by . This book was released on 2003 with total page 1780 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vols. for 1963- include as pt. 2 of the Jan. issue: Medical subject headings.
Download or read book 2020 IEEE International Ultrasonics Symposium IUS written by and published by . This book was released on with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of the symposium is to provide a forum for researchers and practitioners from industry, academia, and government involved in the area of Medical Ultrasonics Sensors, NDE and Industrial Applications Physical Acoustics Microacoustics Transducers and Transducer Materials or similar techniques and protocols.
Download or read book 2015 ICU International Congress on Ultrasonics Abstract Book Metz France Declercq N F editor 2015 written by Nico F. Declercq and published by Nico F. Declercq. This book was released on 2015-05-11 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: The compilation of this book has been made possible with the help of Didier Cassereau, Bertrand Dubus and John Fritsch with support from the Scientific and Technical Committee of 2015 ICU.
Download or read book Journal of the Ceramic Society of Japan written by and published by . This book was released on 1991 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling and Measurement Methods for Acoustic Waves and for Acoustic Microdevices written by Marco G. Beghi and published by BoD – Books on Demand. This book was released on 2013-08-28 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Acoustics is a mature field which enjoys a never ending youth. New developments are induced by either the search for a better understanding, or by technological innovations. Micro-fabrication techniques introduced a whole new class of microdevices, which exploit acoustic waves for various tasks, and in particular for information processing and for sensing purposes. Performance improvements are achievable by better modelling tools, able to deal with more complex configurations, and by more refined techniques of fabrication and of integration in technological systems, like wireless communications. Several chapters of this book deal with modelling and fabrication techniques for microdevices, including unconventional phenomena and configurations. But this is far from exhausting the research lines in acoustics. Theoretical analyses and modelling techniques are presented, for phenomena ranging from the detection of cracks to the acoustics of the oceans. Measurement methods are also discussed, which probe by acoustic waves the properties of widely different systems.
