Download or read book Study on the Characterization of Mechanical Properties of Viscoelastic plastic Materials by Nanoindentation written by Lei Wang and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Mechanical Characterization of Synthetic and Natural Viscoelastic Materials Through Nanoindentation written by Timothy Montalbano and published by . This book was released on 2010 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Determination of Properties of Viscoelastic Materials by Nanoindentation written by Arkadz Fatseyeu and published by . This book was released on 2005 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this work was to explore the possibility of measuring properties of viscoelastic materials by nanoindentation. Indentation is not a common method for determining properties of viscoelastic materials and nanoindentation is a very new, state-of-the art technology. Therefore, this research is one of very few works in this area. This study includes nanoindentation experiments on viscoelastic materials, determining bulk properties of the same materials by conventional rheological techniques, suggesting of physical models to measure properties of viscoelastic solids and viscoelastic liquids by nanoindentation and numerical simulations of the nanoindentation process. The experimental part includes nanoindentation tests of viscoelastic solids and viscoelastic liquids and comparing measured local properties with the bulk ones. The bulk properties were measured with SAOS and Torsion tests. For this investigation polybutadiene was selected as an example of a viscoelastic liquid and silicon cross-linked rubber as a viscoelastic solid. It was found that the local properties of solid polymers vary widely. However, by averaging data collected from various locations, the bulk properties can be determined accurately for the viscoelastic solids. For the physical modeling we validated the Sneddon & Sakai model of indentation of viscoelastic solids and suggested a model for the indentation of viscoelastic liquids, based on Stoke's theory of a potential flow around a sphere. Also nanoindentation of a viscous liquid was simulated using the FLUENT commercial code. It was found that for the indentation of viscoelastic materials with dominantly viscous properties, the indentation model developed from Stoke's theory gives realistic values for shear forces, but predicts a smaller than actual compression force, acting on the surface of the indenter. The comparison of the results of the mentioned above different approaches allowed us to draw conclusions about the advantages and limitation of the technology and theoretical analysis of nanoindentation and its application in rheometry. It was shown that nanoindentation can be successfully used for investigation of viscoelastic materials. Because of its unique abilities nanoindentation will become an irreplaceable tool in such areas as the testing of thin films, study of materials in a transient states, and biomedical research. However, there are number of technical and theoretical issues that need to be addressed. We outlined issues that need to be resolved and suggested direction for further research and development. Among them are: selection of a proper model to simulate behavior of particular viscoelastic material, further improvement of indentation control and data acquisition system, manufacturing new indenters of optimum shape and material.

Download or read book Applied Nanoindentation in Advanced Materials written by Atul Tiwari and published by John Wiley & Sons. This book was released on 2017-10-30 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research in the area of nanoindentation has gained significant momentum in recent years, but there are very few books currently available which can educate researchers on the application aspects of this technique in various areas of materials science. Applied Nanoindentation in Advanced Materials addresses this need and is a comprehensive, self-contained reference covering applied aspects of nanoindentation in advanced materials. With contributions from leading researchers in the field, this book is divided into three parts. Part one covers innovations and analysis, and parts two and three examine the application and evaluation of soft and ceramic-like materials respectively. Key features: A one stop solution for scholars and researchers to learn applied aspects of nanoindentation Contains contributions from leading researchers in the field Includes the analysis of key properties that can be studied using the nanoindentation technique Covers recent innovations Includes worked examples Applied Nanoindentation in Advanced Materials is an ideal reference for researchers and practitioners working in the areas of nanotechnology and nanomechanics, and is also a useful source of information for graduate students in mechanical and materials engineering, and chemistry. This book also contains a wealth of information for scientists and engineers interested in mathematical modelling and simulations related to nanoindentation testing and analysis.

Download or read book Nanoindentation written by Anthony C. Fischer-Cripps and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of Nanoindentation includes a dedicated chapter on thin films, new material on dynamic analysis and creep, accounts of recent research, and three new appendices on nonlinear least squares fitting, frequently asked questions, and specifications for a nanoindentation instrument. Nanoindentation Second Edition is intended for those who are entering the field for the first time and to act as a reference for those already conversant with the technique.

Download or read book Nanoindentation written by Anthony C. Fischer-Cripps and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical engineering, an engineering discipline borne of the needs of the industrial revolution, is once again asked to do its substantial share in the call for industrial renewal. The general call is urgent as we face profound issues of productivity and competitiveness that require engineering solutions, among others. The Mechanical Engineering Series features graduate texts and research monographs intended to address the need for information in contemporary areas of mechanical engineering. The series is conceived as a comprehensive one that covers a broad range of concentrations important to mechanical engineering graduate education and research. We are fortunate to have a distinguished roster of consulting editors on the advisory board, each an expert in one of the areas of concentration. The names of the consulting editors are listed on the facing page of this volume. The areas of concentration are: applied mechanics; biomechanics; computational mechanics; dynamic systems and control; energetics; mechanics of materials; processing; thermal science; and tribology.

Download or read book Microscopy Methods in Nanomaterials Characterization written by Sabu Thomas and published by Elsevier. This book was released on 2017-05-17 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microscopy Methods in Nanomaterials Characterization fills an important gap in the literature with a detailed look at microscopic and X-ray based characterization of nanomaterials. These microscopic techniques are used for the determination of surface morphology and the dispersion characteristics of nanomaterials. This book deals with the detailed discussion of these aspects, and will provide the reader with a fundamental understanding of morphological tools, such as instrumentation, sample preparation and different kinds of analyses, etc. In addition, it covers the latest developments and trends morphological characterization using a variety of microscopes. Materials scientists, materials engineers and scientists in related disciplines, including chemistry and physics, will find this to be a detailed, method-orientated guide to microscopy methods of nanocharacterization. Takes a method-orientated approach that includes case studies that illustrate how to carry out each characterization technique Discusses the advantages and disadvantages of each microscopy characterization technique, giving the reader greater understanding of conditions for different techniques Presents an in-depth discussion of each technique, allowing the reader to gain a detailed understanding of each

Download or read book Handbook of Nanoindentation written by Michelle L. Oyen and published by CRC Press. This book was released on 2019-04-01 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoindentation is ideal for the characterization of inhomogeneous biological materials. However, the use of nanoindentation techniques in biological systems is associated with some distinctively different techniques and challenges. The book presents the basic science of nanoindentation, including the background of contact mechanics underlying indentation technique and the instrumentation used to gather mechanical data. It provides perspectives that are optimized for biological applications, including discussions on hydrated materials and adaptations for low-stiffness materials. The book also covers the applications of nanoindentation technique in biological materials. Highlighting current challenges, it concludes with an insightful forecast of the future.

Download or read book Comprehensive Biomaterials II written by Kevin Healy and published by Elsevier. This book was released on 2017-05-18 with total page 4865 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Biomaterials II, Second Edition, Seven Volume Set brings together the myriad facets of biomaterials into one expertly-written series of edited volumes. Articles address the current status of nearly all biomaterials in the field, their strengths and weaknesses, their future prospects, appropriate analytical methods and testing, device applications and performance, emerging candidate materials as competitors and disruptive technologies, research and development, regulatory management, commercial aspects, and applications, including medical applications. Detailed coverage is given to both new and emerging areas and the latest research in more traditional areas of the field. Particular attention is given to those areas in which major recent developments have taken place. This new edition, with 75% new or updated articles, will provide biomedical scientists in industry, government, academia, and research organizations with an accurate perspective on the field in a manner that is both accessible and thorough. Reviews the current status of nearly all biomaterials in the field by analyzing their strengths and weaknesses, performance, and future prospects Covers all significant emerging technologies in areas such as 3D printing of tissues, organs and scaffolds, cell encapsulation; multimodal delivery, cancer/vaccine - biomaterial applications, neural interface understanding, materials used for in situ imaging, and infection prevention and treatment Effectively describes the many modern aspects of biomaterials from basic science, to clinical applications

Download or read book Characterization of Biomaterials written by Ryan K. Roeder and published by Elsevier Inc. Chapters. This book was released on 2013-03-12 with total page 71 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of biomedical devices almost always involves some form of mechanical characterization of biomaterials. This chapter provides a broad overview of experimental methods and important considerations for mechanical characterization of biomaterials, with special attention to the practical needs of engineers and scientists who encounter a need to characterize the mechanical properties of a biomaterial but may not know where to begin or what the key considerations should be. Many details are necessarily omitted from this broad overview, but numerous references are provided for greater technical depth on a particular topic, standardized methodologies, and exemplary studies. Fundamental concepts are introduced, beginning with stress and strain versus force and displacement. The mechanical properties measured from a stress–strain curve, different types of stress–strain curves, and corresponding constitutive models are reviewed, including differences in material classes and anisotropy. Three primary methods of analysis for fracture mechanics are introduced, including stress concentrations, energy criteria for crack initiation and propagation (fracture toughness), and statistical methods for the probability of fracture. The mechanical characterization of biomaterials begins with selection and preparation of standardized test specimens, which are critical to obtaining accurate and reproducible measurements of material properties. Practical considerations are outlined for selection and preparation of the specimen size, geometry, surface finish, and precracking. The mechanical characterization of biomaterial test specimens always involves the application and measurement of load and deformation. Practical considerations are outlined for the selection and use of load frames, load cells, load fixtures, extensometers, and strain gauges. A number of common loading modes are introduced and compared: uniaxial tension, uniaxial compression, biaxial tension, torsion, diametral compression, three-point bending, four-point bending, and in-plane shear (including biomaterial-tissue interfacial shear strength). Strain-rate sensitivity or time-dependent behavior can profoundly influence stress–strain behavior and thus measured mechanical properties. The effects of high strain rates may be characterized by impact testing using a pendulum, drop tower, or split Hopkinson pressure bar. The effects of low strain rates may be characterized by creep deformation or creep rupture tests. The time-dependent behavior of viscoelastic materials is introduced, including creep, stress relaxation, common constitutive models, and practical considerations for testing. The frequency of loading, or cyclic loading, is another aspect of time-dependent behavior, which is critical for mechanical characterization of biomaterials, leading to fatigue deformation and failure or viscoelastic creep and stress relaxation. Practical considerations are described for selecting the waveform, frequency, cyclic stress/strain levels, loading mode, and test duration. Common methods are introduced for fatigue lifetime testing (including S-N curves, notch factors, and fatigue damage), fatigue crack propagation, and dynamic mechanical analysis (DMA). Nondestructive tests are particularly useful for sampling small volumes of a biomaterial (e.g., implant retrieval or biopsy) or characterizing spatial heterogeneity in mechanical properties. Various indentation tests and indenter geometries are introduced and compared, including classic hardness (Brinell and Rockwell), microhardness (Knoop and Vickers), and instrumented nanoindentation (Berkovich, cube corner, etc.). Methods and limitations are described for characterizing the reduced modulus, viscoelasticity, and fracture toughness using indentation. Ultrasonic wave-propagation methods are also introduced with an emphasis on methods for characterizing anisotropic elastic constants. Biomaterials are typically subjected to various sterilization methods prior to service and an aqueous physiological environment in service. Therefore, the effects of temperature, pressure, various aqueous media (water, phosphate buffered saline (PBS), media, foetal bovine serum (FBS), lipids, etc.), and irradiation on mechanical characterization of biomaterials are considered, including the degradation of mechanical properties by various mechanisms involving water uptake, hydrolysis, and oxidation. Finally, methods and guidelines are provided for data acquisition from transducers and data analysis, including an introduction to some basic statistical methods.

Download or read book Handbook of Mechanics of Materials written by Siegfried Schmauder and published by Springer. This book was released on 2019-05-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive reference for the studies of mechanical properties of materials over multiple length and time scales. The topics include nanomechanics, micromechanics, continuum mechanics, mechanical property measurements, and materials design. The handbook employs a consistent and systematic approach offering readers a user friendly reference ideal for frequent consultation. It is appropriate for an audience at of graduate students, faculties, researchers, and professionals in the fields of Materials Science, Mechanical Engineering, Civil Engineering, Engineering Mechanics, and Aerospace Engineering.

Download or read book Small Scale Deformation using Advanced Nanoindentation Techniques written by Ting Tsui and published by MDPI. This book was released on 2019-06-11 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Small scale mechanical deformations have gained a significant interest over the past few decades, driven by the advances in integrated circuits and microelectromechanical systems. One of the most powerful and versatile characterization methods is the nanoindentation technique. The capabilities of these depth-sensing instruments have been improved considerably. They can perform experiments in vacuum and at high temperatures, such as in-situ SEM and TEM nanoindenters. This allows researchers to visualize mechanical deformations and dislocations motion in real time. Time-dependent behavior of soft materials has also been studied in recent research works. This Special Issue on "Small Scale Deformation using Advanced Nanoindentation Techniques"; will provide a forum for researchers from the academic and industrial communities to present advances in the field of small scale contact mechanics. Materials of interest include metals, glass, and ceramics. Manuscripts related to deformations of biomaterials and biological related specimens are also welcome. Topics of interest include, but are not limited to: Small scale facture Nanoscale plasticity and creep Size-dependent deformation phenomena Deformation of biological cells Mechanical properties of cellular and sub-cellular components Novel mechanical properties characterization techniques New modeling methods Environmentally controlled nanoindentation In-situ SEM and TEM indentation

Download or read book Polymer Surface Characterization written by Luigia Sabbatini and published by Walter de Gruyter GmbH & Co KG. This book was released on 2022-01-19 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fully updated edition provides a broad approach to the surface analysis of polymers being of high technological interest. Modern analytical techniques, potential applications and recent advances in instrumental apparatus are discussed. The self-consistent chapters are devoted to techniques from photoelectron spectroscopy to electron microscopies and wettability.

Download or read book Membrane Characterization written by Nidal Hilal and published by Elsevier. This book was released on 2017-02-18 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Membrane Characterization provides a valuable source of information on how membranes are characterized, an extremely limited field that is confined to only brief descriptions in various technical papers available online. For the first time, readers will be able to understand the importance of membrane characterization, the techniques required, and the fundamental theory behind them. This book focuses on characterization techniques that are normally used for membranes prepared from polymeric, ceramic, and composite materials. Features specific details on many membrane characterization techniques for various membrane materials of industrial and academic interest Contains examples of international best practice techniques for the evaluation of several membrane parameters, including pore size, charge, and fouling Discusses various membrane models more suitable to a specific application Provides examples of ab initio calculations for the design, optimization, and scale-up of processes based on characterization data

Download or read book Applied Nanoindentation in Advanced Materials written by Atul Tiwari and published by John Wiley & Sons. This book was released on 2017-08-30 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research in the area of nanoindentation has gained significant momentum in recent years, but there are very few books currently available which can educate researchers on the application aspects of this technique in various areas of materials science. Applied Nanoindentation in Advanced Materials addresses this need and is a comprehensive, self-contained reference covering applied aspects of nanoindentation in advanced materials. With contributions from leading researchers in the field, this book is divided into three parts. Part one covers innovations and analysis, and parts two and three examine the application and evaluation of soft and ceramic-like materials respectively. Key features: A one stop solution for scholars and researchers to learn applied aspects of nanoindentation Contains contributions from leading researchers in the field Includes the analysis of key properties that can be studied using the nanoindentation technique Covers recent innovations Includes worked examples Applied Nanoindentation in Advanced Materials is an ideal reference for researchers and practitioners working in the areas of nanotechnology and nanomechanics, and is also a useful source of information for graduate students in mechanical and materials engineering, and chemistry. This book also contains a wealth of information for scientists and engineers interested in mathematical modelling and simulations related to nanoindentation testing and analysis.

Download or read book Nanoindentation in Materials Science written by Jiri Nemecek and published by BoD – Books on Demand. This book was released on 2012-10-17 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnologies have already attracted massive interest in multiple fields of science and industry. In the past decades, we have witnessed the progress in micro-level experimental techniques that revolutionize the material science. Designing new materials based on the knowledge of mechanics of their building blocks and microstructure manipulations at nanometer scale have become a reality. Nanoindentation, as a leading micro-level mechanical testing technique, has attracted wide attention in numerous research fields and applications. Nowadays, an extensive variety of testing areas ranging from classical thin coatings in machinery engineering, electronics and composites to far fields of civil engineering, biomechanics, implantology or even agriculture can be covered with this universal testing tool. The book aims to be a walk through achievements in some of the distant fields and to give a brief overview of the current frontiers in nanoindentation. Although it is not possible to cover the whole width of the possible themes in one book, it is believed that the reader will benefit from the topics variety and the book will serve as a useful source of literature references.

Download or read book Viscoelastic and Viscoplastic Materials written by Mohamed El-Amin and published by BoD – Books on Demand. This book was released on 2016-09-21 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces numerous selected advanced topics in viscoelastic and viscoplastic materials. The book effectively blends theoretical, numerical, modeling and experimental aspects of viscoelastic and viscoplastic materials that are usually encountered in many research areas such as chemical, mechanical and petroleum engineering. The book consists of 14 chapters that can serve as an important reference for researchers and engineers working in the field of viscoelastic and viscoplastic materials.