Download or read book Innovative Design Analysis and Development Practices in Aerospace and Automotive Engineering I DAD 2018 written by U. Chandrasekhar and published by Springer. This book was released on 2018-12-20 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the best articles presented by researchers and industrial experts at the International Conference on “Innovative Design and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018)”. The papers discuss new design concepts, analysis and manufacturing technologies, with an emphasis on achieving improved performance by downsizing; improving the weight-to-strength ratio, fuel efficiency, and operational capability at room and elevated temperatures; reducing wear and tear; and addressing NVH aspects, while balancing the challenges of Euro IV/Barat Stage IV emission norms and beyond, greenhouse effects, and recyclable materials. The innovative methods discussed here offer valuable reference material for educational and research organizations, as well as industry, encouraging them to pursue challenging projects of mutual interest.
Download or read book Modelling Diesel Combustion written by P. A. Lakshminarayanan and published by Springer Science & Business Media. This book was released on 2010-03-03 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phenomenology of Diesel Combustion and Modeling Diesel is the most efficient combustion engine today and it plays an important role in transport of goods and passengers on land and on high seas. The emissions must be controlled as stipulated by the society without sacrificing the legendary fuel economy of the diesel engines. These important drivers caused innovations in diesel engineering like re-entrant combustion chambers in the piston, lower swirl support and high pressure injection, in turn reducing the ignition delay and hence the nitric oxides. The limits on emissions are being continually reduced. The- fore, the required accuracy of the models to predict the emissions and efficiency of the engines is high. The phenomenological combustion models based on physical and chemical description of the processes in the engine are practical to describe diesel engine combustion and to carry out parametric studies. This is because the injection process, which can be relatively well predicted, has the dominant effect on mixture formation and subsequent course of combustion. The need for improving these models by incorporating new developments in engine designs is explained in Chapter 2. With “model based control programs” used in the Electronic Control Units of the engines, phenomenological models are assuming more importance now because the detailed CFD based models are too slow to be handled by the Electronic Control Units. Experimental work is necessary to develop the basic understanding of the pr- esses.
Download or read book Cleaner Combustion written by Frédérique Battin-Leclerc and published by Springer Science & Business Media. This book was released on 2013-09-06 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: This overview compiles the on-going research in Europe to enlarge and deepen the understanding of the reaction mechanisms and pathways associated with the combustion of an increased range of fuels. Focus is given to the formation of a large number of hazardous minor pollutants and the inability of current combustion models to predict the formation of minor products such as alkenes, dienes, aromatics, aldehydes and soot nano-particles which have a deleterious impact on both the environment and on human health. Cleaner Combustion describes, at a fundamental level, the reactive chemistry of minor pollutants within extensively validated detailed mechanisms for traditional fuels, but also innovative surrogates, describing the complex chemistry of new environmentally important bio-fuels. Divided into five sections, a broad yet detailed coverage of related research is provided. Beginning with the development of detailed kinetic mechanisms, chapters go on to explore techniques to obtain reliable experimental data, soot and polycyclic aromatic hydrocarbons, mechanism reduction and uncertainty analysis, and elementary reactions. This comprehensive coverage of current research provides a solid foundation for researchers, managers, policy makers and industry operators working in or developing this innovative and globally relevant field.
Download or read book Advanced Engine Diagnostics written by Avinash Kumar Agarwal and published by Springer. This book was released on 2018-11-07 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the discusses advanced fuels and combustion, emission control techniques, after-treatment systems, simulations and fault diagnostics, including discussions on different engine diagnostic techniques such as particle image velocimetry (PIV), phase Doppler interferometry (PDI), laser ignition. This volume bridges the gap between basic concepts and advanced research in internal combustion engine diagnostics, making it a useful reference for both students and researchers whose work focuses on achieving higher fuel efficiency and lowering emissions.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2626 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Perovskites and Related Mixed Oxides written by Pascal Granger and published by John Wiley & Sons. This book was released on 2016-02-23 with total page 1050 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook and ready reference details all the main achievements in the field of perovskite-based and related mixed-oxide materials. The authors discuss, in an unbiased manner, the potentials as well as the challenges related to their use, thus offering new perspectives for research and development on both an academic and industrial level. The first volume begins by summarizing the different synthesis routes from molten salts at high temperatures to colloidal crystal template methods, before going on to focus on the physical properties of the resulting materials and their related applications in the fields of electronics, energy harvesting, and storage as well as electromechanics and superconductivity. The second volume is dedicated to the catalytic applications of perovskites and related mixed oxides, including, but not limited to total oxidation of hydrocarbons, dry reforming of methane and denitrogenation. The concluding section deals with the development of chemical reactors and novel perovskite-based applications, such as fuel cells and high-performance ceramic membranes. Throughout, the contributions clearly point out the intimate links between structure, properties and applications of these materials, making this an invaluable tool for materials scientists and for catalytic and physical chemists.
Download or read book Biodiesel Soot written by Chuan Li and published by Elsevier. This book was released on 2020-10-27 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biodiesel Soot: Tribology, Properties, and Formation covers the basic properties of biodiesel soot, focusing particularly on its tribological behaviors, dispersion characteristics, and techniques for controlling and altering its tribological and material behavior. The book begins with a concise overview of the fundamentals of the properties and preparation of biodiesel, including coverage of the processes involved in the formation of soot particulates, the influence of different fuels on formation, and the effects of different soot on air pollution, friction reduction, and wear resistance of lubricating oil. Other sections cover the influence of biodiesel soot on engine parts and combustion devices. This book will be of particular interest to graduate students and academic or industrial researchers in materials science, as well as mechanical, automotive and chemical engineering. - Covers the tribology, morphology, composition, structure and dispersion of biodiesel soot in engines - Guides problem-solving related to the effects of biodiesel soot on the tribological properties of lubricating oil - Provides fundamental knowledge on the performance and preparation of biodiesel fuel - Discusses the physical-chemical properties of biodiesel soot from the combustion of different fuels
Download or read book Biodiesel written by Ayhan Demirbas and published by Springer Science & Business Media. This book was released on 2007-12-20 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biodiesel: A Realistic Fuel Alternative for Diesel Engines describes the production and characterization of biodiesel. The book also presents current experimental research work in the field, including techniques to reduce biodiesel’s high viscosity. Researchers in renewable energy, as well as fuel engineers, will discover a myriad of new ideas and promising possibilities.
Download or read book Automotive Emissions Regulations and Exhaust Aftertreatment Systems written by John Kasab and published by SAE International. This book was released on 2020-08-31 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to present a fundamental development of the science and engineering underlying the design of exhaust aftertreatment systems for automotive internal combustion engines. No pre-requisite knowledge of the field is required: our objective is to acquaint the reader, whom we expect to be new to the field of emissions control, with the underlying principles, control methods, common problems, and fuel effects on catalytic exhaust aftertreatment devices. We do this in hope that they can better understand the previous and current generations of emissions control, and improve upon them. This book is designed for the engineer, researcher, designer, student, or any combination of those, who is concerned with the control of automotive exhaust emissions. It includes discussion of theory and fundamentals applicable to hardware development.
Download or read book The Role of Catalysis for the Sustainable Production of Bio fuels and Bio chemicals written by Kostas Triantafyllidis and published by Newnes. This book was released on 2013-03-19 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Role of Catalysis for the Sustainable Production of Bio-fuels and Bio-chemicals describes the importance of catalysis for the sustainable production of biofuels and biochemicals, focused primarily on the state-of-the-art catalysts and catalytic processes expected to play a decisive role in the "green" production of fuels and chemicals from biomass. In addition, the book includes general elements regarding the entire chain of biomass production, conversion, environment, economy, and life-cycle assessment. Very few books are available on catalysis in production schemes using biomass or its primary conversion products, such as bio-oil and lignin. This book fills that gap with detailed discussions of: - Catalytic pyrolysis of lignocellulosic biomass - Hybrid biogasoline by co-processing in FCC units - Fischer-Tropsch synthesis to biofuels (biomass-to-liquid process) - Steam reforming of bio-oils to hydrogen With energy prices rapidly rising, environmental concerns growing, and regulatory apparatus evolving, this book is a resource with tutorial, research, and technological value for chemists, chemical engineers, policymakers, and students. - Includes catalytic reaction mechanism schemes and gives a clear understanding of catalytic processes - Includes flow diagrams of bench-, pilot- and industrial-scale catalytic processing units and demonstrates the various process technologies involved, enabling easy selection of the best process - Incorporates many tables, enabling easy comparison of data based on a critical review of the available literature
Download or read book Gas Separation Membranes written by Ahmad Fauzi Ismail and published by Springer. This book was released on 2015-04-28 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the tremendous progress that has been made in the development of gas separation membranes based both on inorganic and polymeric materials. Materials discussed include polymer inclusion membranes (PIMs), metal organic frameworks (MOFs), carbon based materials, zeolites, as well as other materials, and mixed matrix membranes (MMMs) in which the above novel materials are incorporated. This broad survey of gas membranes covers material, theory, modeling, preparation, characterization (for example, by AFM, IR, XRD, ESR, Positron annihilation spectroscopy), tailoring of membranes, membrane module and system design, and applications. The book is concluded with some perspectives about the future direction of the field.
Download or read book Simultaneous Catalytic Removal of Diesel Soot and NOx written by Wenfeng Shangguan and published by Springer. This book was released on 2018-06-28 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book not only explores catalysis processes in redox reactions but also proposes a potential after-treatment strategy. Summarizing the authors’ major works, it offers a guidebook for those working on environmental and industrial catalysis. It presents insights into reaction kinetics in a variety of materials and analyzes the external conditions influencing the reaction. As such it is of particular interest to engineers and scientists in the field of material chemistry, chemical engineering and automobile industry. With novel images and illustrations, it provides a new perspective for interpreting soot abatement material and understanding the reaction process and inspires scientists to design new catalysts with moderate redox capacity.
Download or read book Soot Formation in Combustion written by Henning Bockhorn and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soot Formation in Combustion represents an up-to-date overview. The contributions trace back to the 1991 Heidelberg symposium entitled "Mechanism and Models of Soot Formation" and have all been reedited by Prof. Bockhorn in close contact with the original authors. The book gives an easy introduction to the field for newcomers, and provides detailed treatments for the specialists. The following list of contents illustrates the topics under review:
Download or read book Diesel Particulate Filter Technology written by Timothy V Johnson and published by SAE International. This book was released on 2007-03-28 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until recently, the complexity of the Diesel Particulate Filter (DPF) system has hindered its commercial success. Stringent regulations of diesel emissions has lead to advancements in this technology, therefore mainstreaming the use of DPFs in light- and heavy-duty diesel filtration applications. This book covers the latest and most important research in DPF systems, focusing mainly on the advancements of the years 2002-2006. Editor Timothy V. Johnson selected the top 29 SAE papers covering the most significant research in this technology.
Download or read book Air Pollution XXI written by J. W. S. Longhurst and published by WIT Press. This book was released on 2013 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing papers presented at the twenty-first in a successful series of conferences on the modelling, monitoring and management of air pollution, the book Air Pollution XXI covers what has become a widespread and growing challenge to the international community. Governments face a need to balance concern over its known impacts on local and global health and the environment with improving or maintaining economic development. The key to achieving that balance is to use science to identify the nature and scale of air pollution impacts and to formulate effective policies and regulations. As our knowledge and application of the science of air pollution improves, we are better able to predict, assess and mitigate the implications air pollution has for local, regional, national and international economic systems.The papers deal in the book treat advances in a wide variety of topics, including: Air pollution modelling; Monitoring and measuring; Air quality management; Indoor air pollution; Aerosols and particles; Emission Studies; Air pollution chemistry; Source identification; Global and regional studies; Exposure and health Effects; Economics of air pollution control; Policy and legislation; Case studies; Innovative technologies.
Download or read book Chemical Engineering Progress written by and published by . This book was released on 2007 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt:
