Download or read book Mechanical Properties of Bamboo written by Jules J.A. Janssen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book I have collected many reports on the properties of bamboo. Since I started bamboo research in 1974, I have collected many publications on bamboo. However, in contacts with other researchers I became aware of the fact that several of these publications were unknown to them. Consequently their activities in research or in bamboo projects had to start at a lower level than if they had known some of these publications. Therefore, I discussed the need for a book like this with several colleagues, and I decided to start writing. In this book I present data on properties, as published by resear chers. Certainly it is not complete; e.g. the proceedings of the bamboo workshop in Cochin in November 1988 are not included; they arrived just too late to be taken into account. On the other hand, in writing this preface I realize I have forgotten my own thesis. I do apologize to any colleague whose relevant report is not taken into account as well. I like to express my feelings of respect to the board of my faculty: they allowed me to spend so much time on this book, and they gave a considerable financial support for the printing costs.

Download or read book High Performance Eco Efficient Concrete written by Carlos Thomas and published by . This book was released on 2021 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is dedicated to “High-Performance Eco-Efficient Concrete” and concrete fatigue behavior, more sustainable construction materials, capable of complying with quality standards and current innovation policies, aimed at saving natural resources and reducing global pollution. The development of self-compacting concretes with electric arc furnace slags is a further achievement. In addition, the technical and economic viability of using coarse recycled aggregates from crushed concrete in shotcrete, enhanced quality and reduced on-site construction time are the basic features of prefabricated bridge elements and systems, biomass bottom ash as aluminosilicate precursor and phosphogypsum were discussed. On the other hand, basalt fiber improving the mechanical properties and durability of reactive powder concrete, alkali-activated slag and high-volume fly ash and the potential of phosphogypsum as secondary raw material in construction industry, the effects of fly ash on the diffusion, bonding, and microproperties of chloride penetration in concrete were studied. Increasing amounts of sustainable concretes are being used as society becomes more aware of the environment. Finally, the circular economy as an economic model of production and consumption that involves reusing, repairing, refurbishing, and recycling materials after their service life are presented in this book.

Download or read book Tribology of Natural Fiber Polymer Composites written by and published by Elsevier. This book was released on 2008-10-14 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental concerns are driving demand for bio-degradable materials such as plant-based natural fiber reinforced polymer composites. These composites are fast replacing conventional materials in many applications, especially in automobiles, where tribology (friction, lubrication and wear) is important. This book covers the availability and processing of natural fiber polymer composites and their structural, thermal, mechanical and, in particular, tribological properties. Chapter 1 discusses sources of natural fibers, their extraction and surface modification. It also reviews the thermal, structural, mechanical, spectroscopic and morphological properties of unmodified and chemically modified natural fibers such as sisal, jute, wood, bamboo and cotton together with their potential applications. Chapter 2 gives a brief introduction to the tribology of polymer composites and the role of fiber reinforcement and fillers in modifying their tribological properties. Further chapters discuss the chemical composition, physical structure, mechanical properties and tribological behaviour of polymer composites reinforced with sisal, jute, cotton and bamboo fibers. The tribological behaviour of wood polymer composites (WPCs) is also discussed. Tribology of natural fibre polymer composites is a useful reference guide for engineers, scientific and technical personnel involved in the development of natural fiber composites. In particular it will give an insight into mechanical properties and failure mechanisms in situations where wear, lubrication and friction are a problem. Examines the availability and processing of natural fiber composites and their structural, thermal, mechanical and tribological properties Explores sources of natural fibers, their extraction and surface modification as well as properties of chemically modified natural fibers Provides an overview of the tribology of polymer composites and the role of fiber reinforcement and filters in modifying tribological composites

Download or read book Bamboo Fiber Composites written by Mohammad Jawaid and published by Springer Nature. This book was released on 2020-11-18 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes many of the recent developments in the area of bamboo composites with emphasis on new challenges for the synthesis characterization, properties of bamboo composites and practical applications. The book provides an update of all the important areas of (synthesis, processing, properties and application) bamboo fibers and its composites in a comprehensive manner. The chapters contributed by leading researchers from industry, academy, government and private research institutions across the globe benefit academics, researchers, scientists, engineers and students in the field of natural fiber composites.

Download or read book Handbook of Research on Corrosion Sciences and Engineering written by El Kacimi, Younes and published by IGI Global. This book was released on 2023-05-09 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: The climate change crisis presents a multi-dimensional challenge to the development of the built environment. With finite global resources and increasingly unpredictable climate patterns, the need to improve our understanding of sustainable practices and materials for construction has never been more pressing. The Handbook of Research on Corrosion Sciences and Engineering aims to shed light on the recent developments in the usage of sustainable materials to protect metallic materials against corrosion and provides emerging research exploring the theoretical and practical aspects of corrosion engineering science and technology. Covering key topics such as machine learning, smart coating, sustainability, and artificial intelligence, this major reference work is ideal for construction workers, industry professionals, researchers, academicians, scholars, practitioners, instructors, and students.

Download or read book Biofiber Reinforcements in Composite Materials written by Omar Faruk and published by Elsevier. This book was released on 2014-09-25 with total page 775 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural fiber-reinforced composites have the potential to replace synthetic composites, leading to less expensive, stronger and more environmentally-friendly materials. This book provides a detailed review on how a broad range of biofibers can be used as reinforcements in composites and assesses their overall performance. The book is divided into five major parts according to the origins of the different biofibers. Part I contains chapters on bast fibers, Part II; leaf fibers, Part III; seed fibers, Part IV; grass, reed and cane fibers, and finally Part V covers wood, cellulosic and other fibers including cellulosic nanofibers. Each chapter reviews a specific type of biofiber providing detailed information on the sources of each fiber, their cultivation, how to process and prepare them, and how to integrate them into composite materials. The chapters outline current and potential applications for each fiber and discuss their main strengths and weaknesses. - The book is divided into five major parts according to the origins of the different biofibers - bast, leaf, seed; grass, reed and cane fibers, and finally wood, cellulosic and other fibers including cellulosic nanofibers. - This book provides a detailed review on how a broad range of biofibers can be used as reinforcements in composites and assesses their overall performance - The chapters outline current and potential applications for each fiber and discuss their main strengths and weaknesses

Download or read book Fibre Reinforced Cementitious Composites Second Edition written by Arnon Bentur and published by CRC Press. This book was released on 2006-11-22 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced cementitious composites can be designed to have outstanding combinations of strength (five to ten times that of conventional concrete) and energy absorption capacity (up to 1000 times that of plain concrete). This second edition brings together in one volume the latest research developments in this rapidly expanding area. The book is split into two parts. The first part is concerned with the mechanics of fibre reinforced brittle matrices and the implications for cementitious systems. In the second part the authors describe the various types of fibre-cement composites, discussing production processes, mechanical and physical properties, durability and applications. Two new chapters have been added, covering fibre specification and structural applications. Fibre Reinforced Cementitious Composites will be of great interest to practitioners involved in modern concrete technology and will also be of use to academics, researchers and graduate students.

Download or read book High Performance Eco Efficient Concrete written by Carlos Thomas and published by MDPI. This book was released on 2021-05-26 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is dedicated to “High-Performance Eco-Efficient Concrete” and concrete fatigue behavior, more sustainable construction materials, capable of complying with quality standards and current innovation policies, aimed at saving natural resources and reducing global pollution. The development of self-compacting concretes with electric arc furnace slags is a further achievement. In addition, the technical and economic viability of using coarse recycled aggregates from crushed concrete in shotcrete, enhanced quality and reduced on-site construction time are the basic features of prefabricated bridge elements and systems, biomass bottom ash as aluminosilicate precursor and phosphogypsum were discussed. On the other hand, basalt fiber improving the mechanical properties and durability of reactive powder concrete, alkali-activated slag and high-volume fly ash and the potential of phosphogypsum as secondary raw material in construction industry, the effects of fly ash on the diffusion, bonding, and microproperties of chloride penetration in concrete were studied. Increasing amounts of sustainable concretes are being used as society becomes more aware of the environment. Finally, the circular economy as an economic model of production and consumption that involves reusing, repairing, refurbishing, and recycling materials after their service life are presented in this book.

Download or read book Application of Bamboo in Building Envelope written by Zujian Huang and published by Springer. This book was released on 2019-05-14 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive overview of the use of bamboo in building industry. It systematically demonstrates bamboo’s utility in terms of its properties, describing the material properties of typical industrial bamboo products, and discussing their performance evaluation and optimization as building components and in the creation of building envelopes. The book also includes examples of the high-value utilization of bamboo forest resources. Further, it examines how building performance may be affected by conditions such as climate. Including insights from material science, construction design, building physics and building climatology, the book also provides data obtained from technology and market status investigation, laboratory test and the computer simulation.This book appeals to scientists and professionals, as it introduces and tests various bamboo products, demonstrating the advantages and disadvantages for each one. The book is also a valuable resource for civil engineers and students interested in this unique plant material and its application in the building industry.

Download or read book Low Binder Concrete and Mortars written by Jorge de Brito and published by MDPI. This book was released on 2020-12-06 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the result of a Special Issue published in Applied Sciences entitled “Low Binder Concrete and Mortars". The main aim of this work is to highlight practical approaches that facilitate the production of low binder content concrete and mortar with an acceptable level of technical performance (e.g., mechanical and durability) and environmental impacts (e.g., ecotoxicological and global warming). Its contents are organized in the following sections: Developing Zero-Cement Binder; Ecotoxicological and Chemical Characteristics of the Non-conventional Materials Used to Replace Cement and Natural Aggregates; Reduce the Environmental Impacts and Resources Use of Binders; Modify the Characteristics of the Cement-Based Materials; Low Binder Concrete On-Site Application; Sustainable Cement-Based Materials in Road Engineering.

Download or read book Green Biocomposites written by Mohammad Jawaid and published by Springer. This book was released on 2017-02-11 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the concept, design and application of green biocomposites, with a specific focus on the current demand for green biocomposites for automotive and aerospace components. It discusses the mathematical background, innovative approaches to physical modelling, analysis and design techniques. Including numerous illustrations, tables, case studies and exercises, the text summarises current research in the field. It is a valuable reference resource for researchers, students and scientists working in the field of materials science.

Download or read book Transportation Research Record written by and published by . This book was released on 1989 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced High Strength Natural Fibre Composites in Construction written by Mizi Fan and published by Woodhead Publishing. This book was released on 2016-10-04 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced High Strength Natural Fibre Composites in Construction provides the basic framework and knowledge required for the efficient and sustainable use of natural fiber composites as a structural and building material, along with information on the ongoing efforts to improve the efficiency of use and competitiveness of these composites. Areas of particular interest include understanding the nature and behavior of raw materials and their functional contributions to the advanced architectures of high strength composites (Part 1), discussing both traditional and novel manufacturing technologies for various advanced natural fiber construction materials (Part 2), examining the parameters and performance of the composites (Part 3), and finally commenting on the associated codes, standards, and sustainable development of advanced high strength natural fiber composites for construction. This exposition will be based on well understood environmental science as it applies to construction (Part 4). The book is aimed at academics, research scholars, and engineers, and will serve as a most valuable text or reference book that challenges undergraduate and postgraduate students to think beyond standard practices when designing and creating novel construction materials. - Presents the first comprehensive review on the efficient and sustainable use of natural fiber composites in construction and building materials - Contains detailed information on the structure, chemical composition, and physical and mechanical properties of natural fibers - Covers both traditional and novel manufacturing technologies for high strength natural fiber composites - Includes material parameters and performance in use, as well as associated codes, standards, and applied case studies - Presents contributions from leading international experts in the field

Download or read book Woven Terry Fabrics written by Jitendra Pratap Singh and published by Woodhead Publishing. This book was released on 2016-08-19 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Woven Terry Fabrics: Manufacturing and Quality Management encompasses all aspects of terry fabric production, from raw material choice and weave design to technological developments, dyeing, and quality evaluation. Nothing feels more luxurious and comforting than wrapping myself or one of my children in a thick, soft, fluffy towel after bathing says Lindsey, a healthcare administrator and mother of two children in Boston. Consumers pay an average 15 USD for a bath towel. So, it has become a luxury item today. To meet the demand of growing population, the terry fabric industry has grown to a large extent. Lots of technological developments have taken place in this field. - Provides an excellent overview of the best production methods, quality control systems, latest research, and process parameters - Offers in-depth information on all aspects of production - Covers comprehensively, for the first time, the whole process from raw material through to finished fabric - Includes coverage of technological developments

Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Biomass and Bioenergy written by Khalid Rehman Hakeem and published by Springer. This book was released on 2014-08-25 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomass obtained from agricultural residues or forest can be used to produce different materials and bioenergy required in a modern society. As compared to other resources available, biomass is one of the most common and widespread resources in the world. Thus, biomass has the potential to provide a renewable energy source, both locally and across large areas of the world. It is estimated that the total investment in the biomass sector between 2008 and 2021 will reach the large sum of $104 billion. Presently bioenergy is the most important renewable energy option and will remain so the near and medium-term future. Previously several countries try to explore the utilization of biomass in bioenergy and composite sector. Biomass has the potential to become the world’s largest and most sustainable energy source and will be very much in demand. Bioenergy is based on resources that can be utilized on a sustainable basis all around the world and can thus serve as an effective option for the provision of energy services. In addition, the benefits accrued go beyond energy provision, creating unique opportunities for regional development. The present book will provide an up-to-date account of non-wood, forest residues, agricultural biomass (natural fibers), and energy crops together with processing, properties and its applications to ensure biomass utilization and reuse. All aspects of biomass and bioenergy and their properties and applications will be critically re-examined. The book consists of three sections, presenting Non wood and forest products from forestry, arboriculture activities or from wood processing, agricultural biomass (natural fibers) from agricultural harvesting or processing and finally energy crops: high yield crops and grasses grown especially for energy production.

Download or read book The Anatomy of Bamboo Culms written by Walter Liese and published by BRILL. This book was released on 1998 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given its unrivalled position in terms of diversity, distribution and uses, coupled with the vital role it plays in the rural economies of several countries around the world, bamboo has emerged in recent years as potentially the most important non-wood forest resource to replace wood in construction and other uses. Concomitantly, the interest being shown in this invaluable natural resource since the 1980s has resulted in the accumulation of a considerable body of information through research on various aspects of bamboos, including the anatomy of the bamboo culm. There is, however, no comprehensive publication available on the anatomy of bamboo culm, with the available literature being fragmented, scattered and inadequate. This landmark monograph by renowned wood biologist, forestry expert and bamboo specialist, Professor Walter Liese, whose innovative work on the study of anatomical structure using advanced microscopy and other techniques has won him wide international acclaim, fulfils the need for a comprehensive overview of current knowledge on this subject. It is the first attempt to synthesize information from studies on this subject, many of which have been contributed by Professor Liese, spread over the past four decades. By identifying gaps in the current anatomical knowledge base of bamboo culm, it is expected to stimulate further research and to act as a prime mover for knowledge generation in the key areas of bamboo anatomy, growth and taxonomy.