Download or read book Trellis and Turbo Coding written by Christian B. Schlegel and published by John Wiley & Sons. This book was released on 2015-10-12 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition has been extensively revised to reflect the progress in error control coding over the past few years. Over 60% of the material has been completely reworked, and 30% of the material is original. Convolutional, turbo, and low density parity-check (LDPC) coding and polar codes in a unified framework Advanced research-related developments such as spatial coupling A focus on algorithmic and implementation aspects of error control coding

Download or read book Error Control Coding for Data Networks written by Irving S. Reed and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of Error-Control Coding for Data Networks is to provide an accessible and comprehensive overview of the fundamental techniques and practical applications of the error-control coding needed by students and engineers. An additional purpose of the book is to acquaint the reader with the analytical techniques used to design an error-control coding system for many new applications in data networks. Error~control coding is a field in which elegant theory was motivated by practical problems so that it often leads to important useful advances. Claude Shannon in 1948 proved the existence of error-control codes that, under suitable conditions and at rates less than channel capacity, would transmit error-free information for all practical applications. The first practical binary codes were introduced by Richard Hamming and Marcel Golay from which the drama and excitement have infused researchers and engineers in digital communication and error-control coding for more than fifty years. Nowadays, error-control codes are being used in almost all modem digital electronic systems and data networks. Not only is coding equipment being implemented to increase the energy and bandwidth efficiency of communication systems, but coding also provides innovative solutions to many related data-networking problems.

Download or read book Error Correction Coding written by Todd K. Moon and published by John Wiley & Sons. This book was released on 2005-06-06 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: An unparalleled learning tool and guide to error correction coding Error correction coding techniques allow the detection and correction of errors occurring during the transmission of data in digital communication systems. These techniques are nearly universally employed in modern communication systems, and are thus an important component of the modern information economy. Error Correction Coding: Mathematical Methods and Algorithms provides a comprehensive introduction to both the theoretical and practical aspects of error correction coding, with a presentation suitable for a wide variety of audiences, including graduate students in electrical engineering, mathematics, or computer science. The pedagogy is arranged so that the mathematical concepts are presented incrementally, followed immediately by applications to coding. A large number of exercises expand and deepen students' understanding. A unique feature of the book is a set of programming laboratories, supplemented with over 250 programs and functions on an associated Web site, which provides hands-on experience and a better understanding of the material. These laboratories lead students through the implementation and evaluation of Hamming codes, CRC codes, BCH and R-S codes, convolutional codes, turbo codes, and LDPC codes. This text offers both "classical" coding theory-such as Hamming, BCH, Reed-Solomon, Reed-Muller, and convolutional codes-as well as modern codes and decoding methods, including turbo codes, LDPC codes, repeat-accumulate codes, space time codes, factor graphs, soft-decision decoding, Guruswami-Sudan decoding, EXIT charts, and iterative decoding. Theoretical complements on performance and bounds are presented. Coding is also put into its communications and information theoretic context and connections are drawn to public key cryptosystems. Ideal as a classroom resource and a professional reference, this thorough guide will benefit electrical and computer engineers, mathematicians, students, researchers, and scientists.

Download or read book Non Binary Error Control Coding for Wireless Communication and Data Storage written by Rolando Antonio Carrasco and published by Wiley-Blackwell. This book was released on 2008 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Non-Binary Error Control Coding for Wireless Communication and Data Storage explores non-binary coding schemes that have been developed to provide an alternative to the Reed-Solomon codes, which are expected to become unsuitable for use in future data storage and communication devices as the demand for higher data rates increases. This book will look at the other significant non-binary coding schemes, including non-binary block and ring trellis-coded modulation (TCM) codes that perform well in fading conditions without any expansion in bandwidth use, and algebraic-geometric codes which are an extension of Reed-Solomon codes but with better parameters. Key Features: Comprehensive and self-contained reference to non-binary error control coding starting from binary codes and progressing up to the latest non-binary codes; Explains the design and construction of good non-binary codes with descriptions of efficient non-binary decoding algorithms with applications for wireless communication and high-density data storage; Discusses the application to specific cellular and wireless channels, and also magnetic storage channels that model the reading of data from the magnetic disc of a hard drive; Includes detailed worked examples for each coding scheme to supplement the concepts described in this book; Focuses on the encoding, decoding and performance of both block and convolutional non-binary codes, and covers the Kötter-Vardy algorithm and Non-binary LDPC codes."--Publisher's description.

Download or read book Error Control Systems for Digital Communication and Storage written by Stephen B. Wicker and published by . This book was released on 1995 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: For introductory graduate courses in coding for telecommunications engineering, digital communications. This introductory text on error control coding focuses on key implementation issues and performance analysis with applications valuable to both mathematicians and engineers.

Download or read book Trellis Coding written by Christian B. Schlegel and published by Wiley-IEEE Press. This book was released on 1997 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most important features, results and techniques of trellis coding which have appeared in the literature over the past 15 years. It is a summary as well as a basis for anyone involved in trellis coding applications or research. Engineers, communications specialists, telecommunications experts, scientists, mathematicians and students will find this book an invaluable resource.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Art of Error Correcting Coding written by Robert H. Morelos-Zaragoza and published by John Wiley & Sons. This book was released on 2006-07-11 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on the success of the first edition, which offered a practical introductory approach to the techniques of error concealment, this book, now fully revised and updated, provides a comprehensive treatment of the subject and includes a wealth of additional features. The Art of Error Correcting Coding, Second Edition explores intermediate and advanced level concepts as well as those which will appeal to the novice. All key topics are discussed, including Reed-Solomon codes, Viterbi decoding, soft-output decoding algorithms, MAP, log-MAP and MAX-log-MAP. Reliability-based algorithms GMD and Chase are examined, as are turbo codes, both serially and parallel concatenated, as well as low-density parity-check (LDPC) codes and their iterative decoders. Features additional problems at the end of each chapter and an instructor’s solutions manual Updated companion website offers new C/C ++programs and MATLAB scripts, to help with the understanding and implementation of basic ECC techniques Easy to follow examples illustrate the fundamental concepts of error correcting codes Basic analysis tools are provided throughout to help in the assessment of the error performance block and convolutional codes of a particular error correcting coding (ECC) scheme for a selection of the basic channel models This edition provides an essential resource to engineers, computer scientists and graduate students alike for understanding and applying ECC techniques in the transmission and storage of digital information.

Download or read book Turbo Coding Turbo Equalisation and Space Time Coding written by Lajos Hanzo and published by John Wiley & Sons. This book was released on 2011-05-03 with total page 839 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the full range of channel codes from the most conventional through to the most advanced, the second edition of Turbo Coding, Turbo Equalisation and Space-Time Coding is a self-contained reference on channel coding for wireless channels. The book commences with a historical perspective on the topic, which leads to two basic component codes, convolutional and block codes. It then moves on to turbo codes which exploit iterative decoding by using algorithms, such as the Maximum-A-Posteriori (MAP), Log-MAP and Soft Output Viterbi Algorithm (SOVA), comparing their performance. It also compares Trellis Coded Modulation (TCM), Turbo Trellis Coded Modulation (TTCM), Bit-Interleaved Coded Modulation (BICM) and Iterative BICM (BICM-ID) under various channel conditions. The horizon of the content is then extended to incorporate topics which have found their way into diverse standard systems. These include space-time block and trellis codes, as well as other Multiple-Input Multiple-Output (MIMO) schemes and near-instantaneously Adaptive Quadrature Amplitude Modulation (AQAM). The book also elaborates on turbo equalisation by providing a detailed portrayal of recent advances in partial response modulation schemes using diverse channel codes. A radically new aspect for this second edition is the discussion of multi-level coding and sphere-packing schemes, Extrinsic Information Transfer (EXIT) charts, as well as an introduction to the family of Generalized Low Density Parity Check codes. This new edition includes recent advances in near-capacity turbo-transceivers as well as new sections on multi-level coding schemes and of Generalized Low Density Parity Check codes Comparatively studies diverse channel coded and turbo detected systems to give all-inclusive information for researchers, engineers and students Details EXIT-chart based irregular transceiver designs Uses rich performance comparisons as well as diverse near-capacity design examples

Download or read book Coded Modulation and Bandwidth efficient Transmission written by Ezio Biglieri and published by Elsevier Publishing Company. This book was released on 1992 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Almost two decades ago, by using random coding bound arguments, it was proved that considerable progress in the power efficiency of digital communication could be obtained by treating coding and modulation as a single entity. These ideas were carried further in the manifestation of Trellis Coded Modulation (TCM) techniques. Sine then, the idea of TCM has expanded greatly beyond the type of schemes originally presented, and has given way to a considerable amount of research activity, both theoretical and applied, and to the implementation of several TCM techniques in new generations of modems. Block-Coded Modulation (BCM) was discovered at about the same time as TCM, and is currently attracting considerable interest as a possible alternative to TCM for some applications. A thorough overview on both kinds of coded modulation is discussed in this volume. It assesses the status and the prospects of coded modulation and of bandwidth-efficient transmission, shedding light on the future avenue of theory and applications in these exciting areas.

Download or read book Coding and Modulation for Digital Television written by Gordon M. Drury and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coding and Modulation for Digital Television presents a comprehensive description of all error control coding and digital modulation techniques used in Digital Television (DTV). This book illustrates the relevant elements from the expansive theory of channel coding to how the transmission environment dictates the choice of error control coding and digital modulation schemes. These elements are presented in such a way that both the `mathematical integrity' and `understanding for engineers' are combined in a complete form and supported by a number of practical examples. In addition, the book contains descriptions of the existing standards and provides a valuable source of corresponding references. Coding and Modulation for Digital Television also features a description of the latest techniques, providing the reader with a glimpse of future digital broadcasting. These include the concepts of soft-in-soft-out decoding, turbo-coding and cross-correlated quadrature modulation, all of which will have a prominent future in improving efficiency of the next generation DTV systems. Coding and Modulation for Digital Television is essential reading for all undergraduate and postgraduate students, broadcasting and communication engineers, researchers, marketing managers, regulatory bodies, governmental organizations and standardization institutions of the digital television industry.

Download or read book Telecommunications Engineering Principles And Practice written by Amoakoh Gyasi-agyei and published by World Scientific. This book was released on 2019-06-19 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers basic principles of telecommunications and their applications in the design and analysis of modern networks and systems. Aimed to make telecommunications engineering easily accessible to students, this book contains numerous worked examples, case studies and review questions at the end of each section. Readers of the book can thus easily check their understanding of the topics progressively. To render the book more hands-on, MATLAB® software package is used to explain some of the concepts. Parts of this book are taught in undergraduate curriculum, while the rest is taught in graduate courses.Telecommunications Engineering: Theory and Practice treats both traditional and modern topics, such as blockchain, OFDM, OFDMA, SC-FDMA, LPDC codes, arithmetic coding, polar codes and non-orthogonal multiple access (NOMA).

Download or read book Error Correction Coding written by Todd K. Moon and published by John Wiley & Sons. This book was released on 2020-12-22 with total page 999 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing in-depth treatment of error correction Error Correction Coding: Mathematical Methods and Algorithms, 2nd Edition provides a comprehensive introduction to classical and modern methods of error correction. The presentation provides a clear, practical introduction to using a lab-oriented approach. Readers are encouraged to implement the encoding and decoding algorithms with explicit algorithm statements and the mathematics used in error correction, balanced with an algorithmic development on how to actually do the encoding and decoding. Both block and stream (convolutional) codes are discussed, and the mathematics required to understand them are introduced on a “just-in-time” basis as the reader progresses through the book. The second edition increases the impact and reach of the book, updating it to discuss recent important technological advances. New material includes: Extensive coverage of LDPC codes, including a variety of decoding algorithms. A comprehensive introduction to polar codes, including systematic encoding/decoding and list decoding. An introduction to fountain codes. Modern applications to systems such as HDTV, DVBT2, and cell phones Error Correction Coding includes extensive program files (for example, C++ code for all LDPC decoders and polar code decoders), laboratory materials for students to implement algorithms, and an updated solutions manual, all of which are perfect to help the reader understand and retain the content. The book covers classical BCH, Reed Solomon, Golay, Reed Muller, Hamming, and convolutional codes which are still component codes in virtually every modern communication system. There are also fulsome discussions of recently developed polar codes and fountain codes that serve to educate the reader on the newest developments in error correction.

Download or read book Non Binary Error Control Coding for Wireless Communication and Data Storage written by Rolando Antonio Carrasco and published by John Wiley & Sons. This book was released on 2008-11-20 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive introduction to non-binary error-correction coding techniques Non-Binary Error Control Coding for Wireless Communication and Data Storage explores non-binary coding schemes that have been developed to provide an alternative to the Reed – Solomon codes, which are expected to become unsuitable for use in future data storage and communication devices as the demand for higher data rates increases. This book will look at the other significant non-binary coding schemes, including non-binary block and ring trellis-coded modulation (TCM) codes that perform well in fading conditions without any expansion in bandwidth use, and algebraic-geometric codes which are an extension of Reed-Solomon codes but with better parameters. Key Features: Comprehensive and self-contained reference to non-binary error control coding starting from binary codes and progressing up to the latest non-binary codes Explains the design and construction of good non-binary codes with descriptions of efficient non-binary decoding algorithms with applications for wireless communication and high-density data storage Discusses the application to specific cellular and wireless channels, and also magnetic storage channels that model the reading of data from the magnetic disc of a hard drive. Includes detailed worked examples for each coding scheme to supplement the concepts described in this book Focuses on the encoding, decoding and performance of both block and convolutional non-binary codes, and covers the Kötter-Vardy algorithm and Non-binary LDPC codes This book will be an excellent reference for researchers in the wireless communication and data storage communities, as well as development/research engineers in telecoms and storage companies. Postgraduate students in these fields will also find this book of interest.

Download or read book Simulation of Communication Systems written by Michel C. Jeruchim and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first edition of this book was published seven years ago, the field of modeling and simulation of communication systems has grown and matured in many ways, and the use of simulation as a day-to-day tool is now even more common practice. With the current interest in digital mobile communications, a primary area of application of modeling and simulation is now in wireless systems of a different flavor from the `traditional' ones. This second edition represents a substantial revision of the first, partly to accommodate the new applications that have arisen. New chapters include material on modeling and simulation of nonlinear systems, with a complementary section on related measurement techniques, channel modeling and three new case studies; a consolidated set of problems is provided at the end of the book.

Download or read book Masters Abstracts International written by and published by . This book was released on 1996 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Turbo Code Applications written by Keattisak Sripimanwat and published by Springer Science & Business Media. This book was released on 2006-02-23 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbo Code Applications: a journey from a paper to realization presents c- temporary applications of turbo codes in thirteen technical chapters. Each chapter focuses on a particular communication technology utilizing turbo codes, and they are written by experts who have been working in related th areas from around the world. This book is published to celebrate the 10 year anniversary of turbo codes invention by Claude Berrou Alain Glavieux and Punya Thitimajshima (1993-2003). As known for more than a decade, turbo code is the astonishing error control coding scheme which its perf- mance closes to the Shannon’s limit. It has been honored consequently as one of the seventeen great innovations during the ?rst ?fty years of information theory foundation. With the amazing performance compared to that of other existing codes, turbo codes have been adopted into many communication s- tems and incorporated with various modern industrial standards. Numerous research works have been reported from universities and advance companies worldwide. Evidently, it has successfully revolutionized the digital commu- cations. Turbo code and its successors have been applied in most communications startingfromthegroundorterrestrialsystemsofdatastorage,ADSLmodem, and ?ber optic communications. Subsequently, it moves up to the air channel applications by employing to wireless communication systems, and then ?ies up to the space by using in digital video broadcasting and satellite com- nications. Undoubtedly, with the excellent error correction potential, it has been selected to support data transmission in space exploring system as well.