Download or read book Study of Fiber Fracture and Interfacial Chemistry Using the Scanning Electron Microscope written by AG. Causa and published by . This book was released on 1979 with total page 39 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fracture surfaces of various tire cords (bare or embedded in rubber) were examined using scanning electron microscopy, to identify fractographic features characteristic of certain load history, testing mode, or fiber microstructure.
Download or read book Tire Reinforcement and Tire Performance written by Roger A. Fleming and published by ASTM International. This book was released on 1979 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Role of Analytical Electron Microscopy in Investigating Interfacial Phenomena in Continuous Fiber Reinforced Ceramic Composite Interfaces written by Steven Thomas Kim and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: First, an "easy cleaving" oxide coating, potassium calcium niobate (KCN), is evaluated. KCN is a layered perovskite with very weak basal planes that can in principle be oriented to redirect cracks around fibers. Scanning electron microscopy (SEM) analysis of microcomposite samples indicates that the coating promotes debonding at the fiber/coating interface. However, transmission electron microscopy (TEM) analysis shows that the coating is chemically unstable with the sapphire fibers due to a sodium impurity. TEM analysis shows that the fiber has reacted with the coating to produce a highly textured beta-alumina around the circumference of the fiber that is responsible for the observed debonding behavior.
Download or read book Interfacial Engineering for Optimized Properties Volume 458 written by Clyde L. Briant and published by . This book was released on 1997-07-08 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of interfaces is one of the oldest areas of research in materials science. The presence of grain boundaries in materials has long been recognized, as has its crucial role in determining mechanical properties. Another long-recognized concept is that the properties of a surface are quite different from those of the bulk. In recent years, researchers have been able to study these interfaces, both internal and external, with a detail not before possible. These advances have stemmed from the ability to obtain atomic resolution images of interfaces, to measure accurate chemical compositions of interfaces, and to model these interfaces and their properties. This volume goes a step further, beyond structural and chemical studies, to explore how all of this information can be used to engineer interfaces for improved properties and overall improved material performance. Significant attention is given to the crystallographic nature of grain boundaries and interfaces, and the relationship between this nature and the performance of a material. The versatility of electron back-scattering pattern analysis (EBSP) in solving a number of interface-related problems is also featured.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1992-10 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Engineered Interfaces in Fiber Reinforced Composites written by Jang-Kyo Kim and published by Elsevier. This book was released on 1998-10-21 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study and application of composite materials are a truly interdisciplinary endeavour that has been enriched by contributions from chemistry, physics, materials science, mechanics and manufacturing engineering. The understanding of the interface (or interphase) in composites is the central point of this interdisciplinary effort. From the early development of composite materials of various nature, the optimization of the interface has been of major importance. While there are many reference books available on composite materials, few of them deal specifically with the science and mechanics of the interface of fiber reinforced composites. Further, many recent advances devoted solely to research in composite interfaces have been scattered in a variety of published literature and have yet to be assembled in a readily accessible form. To this end this book is an attempt to bring together recent developments in the field, both from the materials science and mechanics perspective, in a single convenient volume.The central theme of the book is tailoring the interface properties to optimise the mechanical peformance and structural integrity of composites with enhanced strength/stiffness and fracture toughness (or specific fracture resistance). It deals mainly with interfaces in advanced composites made from high performance fibers, such as glass, carbon, aramid, ultra high modulus polyethylene and some inorganic (e.g. B/W, A12O3, SiC) fibers, and matrix materials encompassing polymers, metals/alloys and ceramics. The book is intended to provide a comprehensive treatment of composite interfaces in such a way that it should be of interest to materials scientists, technologists and practising engineers, as well as graduate students and their supervisors in advanced composites. We hope that this book will also serve as a valuable source of reference to all those involved in the design and research of composite interfaces.The book contains eight chapters of discussions on microstructure-property relationships with underlying fundamental mechanics principles. In Chapter 1, an introduction is given to the nature and definition of interfaces in fiber reinforced composites. Chapter 2 is devoted to the mechanisms of adhesion which are specific to each fiber-matrix system, and the physio-chemical characterization of the interface with regard to the origin of adhesion. The experimental techniques that have been developed to assess the fiber-matrix interface bond quality on a microscopic scale are presented in Chapter 3, along with the techniques of measuring interlaminar/intralaminar strengths and fracture toughness using bulk composite laminates. The applicability and limitations associated with loading geometry and interpretation of test data are compared. Chapter 4 presents comprehensive theoretical analyses based on shear-lag models of the single fiber composite tests, with particular interest being placed on the interface debond process and the nature of the fiber-matrix interfacial bonding. Chapter 5 is devoted to reviewing current techniques of fiber surface treatments which have been devised to improve the bond strength and the fiber-matrix compatibility/stability during the manufacturing processes of composites. The micro-failure mechanisms and their associated theories of fracture toughness of composites are discussed in Chapter 6. The roles of the interface and its effects on the mechanical performance of fiber composites are addressed from several viewpoints. Recent research efforts to augment the transverse and interlaminar fracture toughness by means of controlled interfaces are presented in Chapters 7 and 8.
Download or read book Composite Materials written by H. Thomas Hahn and published by ASTM International. This book was released on 1986 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Control of Interfacial Chemistry and Mechanical Properties in Metal ceramic Composites written by Hsin-Fu Wang and published by . This book was released on 1994 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Publications of the National Institute of Standards and Technology Catalog written by National Institute of Standards and Technology (U.S.) and published by . This book was released on 1991 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Surface and Interface Analysis written by John C. Riviere and published by CRC Press. This book was released on 2009-06-24 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: The original Handbook of Surface and Interface Analysis: Methods for Problem-Solving was based on the authors' firm belief that characterization and analysis of surfaces should be conducted in the context of problem solving and not be based on the capabilities of any individual technique. Now, a decade later, trends in science and technology appear
Download or read book 7th Annual Conference on Composites and Advanced Ceramic Materials written by William J. Smothers and published by John Wiley & Sons. This book was released on 2009-09-28 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.
Download or read book Properties and Performance of Natural Fibre Composites written by Kim Pickering and published by Elsevier. This book was released on 2008-06-23 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concern about global warming has led to renewed interest in the more sustainable use of natural fibres in composite materials. This important book reviews the wealth of recent research into improving the mechanical properties of natural-fibre thermoplastic composites so that they can be more widely used.The first part of the book provides an overview of the main types of natural fibres used in composites, how they are processed and, in particular, the way the fibre-matrix interface can be engineered to improve performance. Part two discusses the increasing use of natural-fibre composites in such areas as automotive and structural engineering, packaging and the energy sector. The final part of the book discusses ways of assessing the mechanical performance of natural-fibre composites.With its distinguished editor and team of contributors, Properties and performance of natural-fibre composites is a valuable reference for all those using these important materials in such areas as automotive and structural engineering. - Provides an overview of the types of natural fibres used in composites - Discusses fibre-matrix interface and how it can be engineered to improve performance - Examines the increasing use of natural-fibre composites in automotive and structural engineering and the packaging and energy sector
Download or read book Surface Coatings Technology written by B. D. Sartwell and published by Elsevier. This book was released on 2016-06-03 with total page 981 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface & Coatings Technology, Volume 61 presents the proceeding of the 20th International Conference on Metallurgical Coatings and Thin Films, held in San Diego, California, on April 19–23, 1993. This book discusses a variety of topics related to surface and coatings technology, including coatings for use at high temperature, hard coatings, and vapor deposition technology. Organized into 141 chapters, this compilation of papers begins with an overview of the coating requirements for long-life bucket protection, how each of these coating systems has performed, and the advantages and disadvantages of each. This text then discusses the gradient-free transition step achieved in the element analysis of the depth profiles. Other chapters consider the metastable yttrium oxide films that are synthesized using reactive sputter deposition. This book discusses as well the use of appropriate copper-based alloy coatings on structural components. The final chapter deals with the particle mechanical and thermal behavior in the process of high velocity oxy-fuel spraying. This book is a valuable resource for chemical engineers and metallurgists.
Download or read book Fiber matrix Interface Studies on Totally and Partially Bioabsorbable Composite Materials for Internal Fixation of Bone Fractures written by Michael Andrew Slivka and published by . This book was released on 1996 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Publications written by United States. National Bureau of Standards and published by . This book was released on 1991 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:
