Download or read book Study of a Transmission System for a Formula Student Electric Vehicle written by Anna López Garrido and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Transmission systems in Formula Student have been progressively changing with the development of the motors technology and the knowledge achieved from years of studying the race car designs. For this reason, the progress achieved and the new solutions applied in different Formula Students vehicles are at the moment at its peak. This study will investigate in all of possible solutions and its application for race cars.
Download or read book Analysis and Optimisation of the Current Gears Transmission System of the UPC EcoRacing Formula Student Vehicle written by Blanca Ferrer Fabón and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This project contains the analysis and optimisation of the gears transmission system which has been designed for the new Formula Student vehicle ecoRX, from UPC ecoRacing team. First, the system design to analyse is explained for the good comprehension of the reader. Also, the working reference of the system and its application to a Formula Student vehicle car is explained. Detailed explanation of design process followed and final characteristics is done. Then, a deep analysis is done by analytic calculations from lectures, which permits analyse teeth strength and meshing efficiency and stiffness. The last step of analysis is made using ANSYS support, for static structural calculations using finite elements method. After a model convergence analysis, meshing behaviour and contact stresses in the system are analysed. Finally, with the data obtained from analytic and numerical analysis, an optimisation of the system is proposed. This Report document is complemented with five more documents, including: List of contents, Annex, Budget, Drawings and Schedule of conditions. See the Document List of contents to have a general overview and find easily each document contents.
Download or read book Automotive Power Transmission Systems written by Yi Zhang and published by John Wiley & Sons. This book was released on 2018-10-08 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides technical details and developments for all automotive power transmission systems The transmission system of an automotive vehicle is the key to the dynamic performance, drivability and comfort, and fuel economy. Modern advanced transmission systems are the combination of mechanical, electrical and electronic subsystems. The development of transmission products requires the synergy of multi-disciplinary expertise in mechanical engineering, electrical engineering, and electronic and software engineering. Automotive Power Transmission Systems comprehensively covers various types of power transmission systems of ground vehicles, including conventional automobiles driven by internal combustion engines, and electric and hybrid vehicles. The book covers the technical aspects of design, analysis and control for manual transmissions, automatic transmission, CVTs, dual clutch transmissions, electric drives, and hybrid power systems. It not only presents the technical details of key transmission components, but also covers the system integration for dynamic analysis and control. Key features: Covers conventional automobiles as well as electric and hybrid vehicles. Covers aspects of design, analysis and control. Includes the most recent developments in the field of automotive power transmission systems. The book is essential reading for researchers and practitioners in automotive, mechanical and electrical engineering.
Download or read book Proceedings of the FISITA 2012 World Automotive Congress written by SAE-China and published by Springer Science & Business Media. This book was released on 2012-11-28 with total page 877 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the FISITA 2012 World Automotive Congress are selected from nearly 2,000 papers submitted to the 34th FISITA World Automotive Congress, which is held by Society of Automotive Engineers of China (SAE-China ) and the International Federation of Automotive Engineering Societies (FISITA). This proceedings focus on solutions for sustainable mobility in all areas of passenger car, truck and bus transportation. Volume 8: Vehicle Design and Testing (II) focuses on: •Automotive Reliability Technology •Lightweight Design Technology •Design for Recycling •Dynamic Modeling •Simulation and Experimental Validation •Virtual Design, Testing and Validation •Testing of Components, Systems and Full Vehicle Above all researchers, professional engineers and graduates in fields of automotive engineering, mechanical engineering and electronic engineering will benefit from this book. SAE-China is a national academic organization composed of enterprises and professionals who focus on research, design and education in the fields of automotive and related industries. FISITA is the umbrella organization for the national automotive societies in 37 countries around the world. It was founded in Paris in 1948 with the purpose of bringing engineers from around the world together in a spirit of cooperation to share ideas and advance the technological development of the automobile.
Download or read book Characterization Study of an Electric Motor Transmission System for Electric Vehicles written by and published by . This book was released on 1978 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 6th International Conference on Industrial Engineering ICIE 2020 written by Andrey A. Radionov and published by Springer Nature. This book was released on 2021-03-31 with total page 1296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering are discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 6th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia in May 2020. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.
Download or read book An Experimental Study of an Electric Powered Hydrostatic Transmission System Toward Electric Vehicle Speed Control written by Carlyle J. Nelson and published by . This book was released on 1982 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of China SAE Congress 2021 Selected Papers written by China Society of Automotive Engineers and published by Springer Nature. This book was released on 2022-10-22 with total page 1373 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings gather outstanding papers presented at the China SAE Congress 2021, held on Oct. 19-21, Shanghai, China. Featuring contributions mainly from China, the biggest carmaker as well as most dynamic car market in the world, the book covers a wide range of automotive-related topics and the latest technical advances in the industry. Many of the approaches in the book will help technicians to solve practical problems that affect their daily work. In addition, the book offers valuable technical support to engineers, researchers and postgraduate students in the field of automotive engineering.
Download or read book Electric Power Transmission System Engineering written by Turan Gönen and published by Wiley-Interscience. This book was released on 1988 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a book for engineers involved with the mechanical design of electrical transmission systems. It includes a review of transmission system engineering and the basics of analysis, and then goes on to cover in detail topics such as the construction of overhead lines, structural supports, insulation requirements, vibration, sag and tension analysis, right-of-way planning and methods of locating structures and underground cables. Also included is material about cost analysis methods and techniques which are unique to transmission line design where fixed costs are shared among joint users. In addition to this the development of system reliability reporting to conform to standard requirements is covered, along with a modern, comprehensive treatment of the design aspects of electrical power systems. New topics of importance, such as fault analysis, system protection, line balancing and economic analysis are contained, with a brief review of analytical techniques which are pre-requisites to designing a system or component.
Download or read book Kinetic Energy Recovery Systems for Racing Cars written by Alberto Boretti and published by SAE International. This book was released on 2013-04-02 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: A kinetic energy recover system (KERS) captures the kinetic energy that results when brakes are applied to a moving vehicle. The recovered energy can be stored in a flywheel or battery and used later, to help boost acceleration. KERS helps transfer what was formerly wasted energy into useful energy. In 2009, the Federation Internationale de l’Automobile (FIA) began allowing KERS to be used in Formula One (F1) competition. Still considered experimental, this technology is undergoing development in the racing world but has yet to become mainstream for production vehicles. The Introduction of this book details the theory behind the KERS concept. It describes how kinetic energy can be recovered, and the mechanical and electric systems for storing it. Flybrid systems are highlighted since they are the most popular KERS developed thus far. The KERS of two racing vehicles are profiled: the Dyson Lola LMP1 and Audi R18 e-tron Quattro. Four SAE technical papers follow the preface and focus on the use of KERS technology in F1 racing. The first paper examines the factors that influence hybrid performance and enable optimization for different racing circuits. The second paper describes a Flybrid KERS designed for the 2009 F1 season. The third paper considers the development of an electric KERS for the 2009 F1 season. The fourth paper presents the challenges and opportunities of the 2014 F1 engine and powertrain rules, particularly as they pertain to KERS. This book has been published for automotive engineers who are interested in hybrid systems, energy recovery, regenerative braking, and improving acceleration. It will also be useful for powertrain designers, researchers, academics, and motorsports professionals (race engineers, team managers, and technology practitioners who design and build racing powertrains).
Download or read book The Automotive Transmission Book written by Robert Fischer and published by Springer. This book was released on 2016-11-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents essential information on systems and interactions in automotive transmission technology and outlines the methodologies used to analyze and develop transmission concepts and designs. Functions of and interactions between components and subassemblies of transmissions are introduced, providing a basis for designing transmission systems and for determining their potentials and properties in vehicle-specific applications: passenger cars, trucks, buses, tractors and motorcycles. With these fundamentals the presentation provides universal resources for both state-of-the-art and future transmission technologies, including systems for electric and hybrid electric vehicles.
Download or read book Vehicle Powertrain Systems written by David Crolla and published by John Wiley & Sons. This book was released on 2011-12-30 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: The powertrain is at the heart of vehicle design; the engine – whether it is a conventional, hybrid or electric design – provides the motive power, which is then managed and controlled through the transmission and final drive components. The overall powertrain system therefore defines the dynamic performance and character of the vehicle. The design of the powertrain has conventionally been tackled by analyzing each of the subsystems individually and the individual components, for example, engine, transmission and driveline have received considerable attention in textbooks over the past decades. The key theme of this book is to take a systems approach – to look at the integration of the components so that the whole powertrain system meets the demands of overall energy efficiency and good drivability. Vehicle Powertrain Systems provides a thorough description and analysis of all the powertrain components and then treats them together so that the overall performance of the vehicle can be understood and calculated. The text is well supported by practical problems and worked examples. Extensive use is made of the MATLAB(R) software and many example programmes for vehicle calculations are provided in the text. Key features: Structured approach to explaining the fundamentals of powertrain engineering Integration of powertrain components into overall vehicle design Emphasis on practical vehicle design issues Extensive use of practical problems and worked examples Provision of MATLAB(R) programmes for the reader to use in vehicle performance calculations This comprehensive and integrated analysis of vehicle powertrain engineering provides an invaluable resource for undergraduate and postgraduate automotive engineering students and is a useful reference for practicing engineers in the vehicle industry
Download or read book Drive Cycle Performance of a Double Planetary Gear Hybrid Electric Vehicle Transmission System written by Deepak Chachra and published by . This book was released on 2008 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Analysis and Modelling of Transmission Systems for Hybrid Electric Vehicles and Electric Vehicles written by Qinglian Ren and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design and Analysis of a Power Transmission Network Model of Electric Vehicle written by and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book EDrive Transmission Guide written by and published by . This book was released on 2020-05-15 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This book was written and published to give an overview of the most popular conventional eDrive solutions and to present the new Gleason developments with the automotive and transmission manufacturing industry. The book also intends to inspire mechanical and electrical engineering students with the new Gleason concepts in order find their interest in the many new tasks engineers will find in the future concepts of electrically propelled automobiles which will be a healthy mix of Battery Electric Vehicles and Hybrids which generate their electricity "on the go". In order to make this book readily available for every interested Automotive Engineer, the main publication media format is as an e-book. The e-book is available for purchase online. However, it is also possible to read the e-book on the Gleason website. For those with a fondness for having a bound book as reference in their office book shelf, a hard cover version of this book is available as well.eDrive Transmission Guide covers 9 topics on 205 pages and has 153 figures - which provide a better understanding and easier memorization of the covered material. The content is divided in 5 parts:? Introduction to Electric Vehicle Transmissions ? Automotive Drive Concepts ? Super Reduction Hypoid eDrives? Reversed Pericyclic Transmissions? Double Differentials as Ultra-High Speed Reducer
Download or read book Powertrain written by Michael Trzesniowski and published by Springer Vieweg. This book was released on 2023-03-03 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the reader learns the essential differences to the passenger car through the analysis divided according to assemblies. This gives him the tools to apply the detailed knowledge acquired to the design and development of competition vehicles. In the case of internal combustion engines, the focus is on performance-enhancing measures for racing vehicles. From the choice of the number of cylinders to the intake system to the exhaust system, the lever can be applied to every assembly. For electric drives, the traction battery, cell selection, cooling and operating strategy are considered in more detail. Energy recovery systems are an interesting enhancement for hybrid vehicles and all-electric powertrains, especially in strategic considerations for racing. Finally, gearboxes are needed independently of the drive source, albeit matched to it, so that the full potential can be exploited. The detailed, in-depth presentation makes this work just as suitable for the interested motorsport enthusiast as it is for the engineer in the field who is addressing the issues surrounding race car powertrains. The formula material is prepared in such a way that the book can also be used as a reference work.
