Download or read book Modelling Diesel Combustion written by P. A. Lakshminarayanan and published by Springer Science & Business Media. This book was released on 2010-03-03 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phenomenology of Diesel Combustion and Modeling Diesel is the most efficient combustion engine today and it plays an important role in transport of goods and passengers on land and on high seas. The emissions must be controlled as stipulated by the society without sacrificing the legendary fuel economy of the diesel engines. These important drivers caused innovations in diesel engineering like re-entrant combustion chambers in the piston, lower swirl support and high pressure injection, in turn reducing the ignition delay and hence the nitric oxides. The limits on emissions are being continually reduced. The- fore, the required accuracy of the models to predict the emissions and efficiency of the engines is high. The phenomenological combustion models based on physical and chemical description of the processes in the engine are practical to describe diesel engine combustion and to carry out parametric studies. This is because the injection process, which can be relatively well predicted, has the dominant effect on mixture formation and subsequent course of combustion. The need for improving these models by incorporating new developments in engine designs is explained in Chapter 2. With “model based control programs” used in the Electronic Control Units of the engines, phenomenological models are assuming more importance now because the detailed CFD based models are too slow to be handled by the Electronic Control Units. Experimental work is necessary to develop the basic understanding of the pr- esses.
Download or read book Modeling and Computer Simulation of Internal Combustion Engines written by and published by . This book was released on 1999 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ASME Technical Papers written by and published by . This book was released on with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1994-11 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Diesel Engine Modeling written by Society of Automotive Engineers and published by SAE International. This book was released on 1999 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 1D and Multi D Modeling Techniques for IC Engine Simulation written by Angelo Onorati and published by SAE International. This book was released on 2020-04-06 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1D and Multi-D Modeling Techniques for IC Engine Simulation provides a description of the most significant and recent achievements in the field of 1D engine simulation models and coupled 1D-3D modeling techniques, including 0D combustion models, quasi-3D methods and some 3D model applications.
Download or read book Computational Optimization of Internal Combustion Engines written by Yu Shi and published by Springer Science & Business Media. This book was released on 2011-06-22 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Optimization of Internal Combustion Engines presents the state of the art of computational models and optimization methods for internal combustion engine development using multi-dimensional computational fluid dynamics (CFD) tools and genetic algorithms. Strategies to reduce computational cost and mesh dependency are discussed, as well as regression analysis methods. Several case studies are presented in a section devoted to applications, including assessments of: spark-ignition engines, dual-fuel engines, heavy duty and light duty diesel engines. Through regression analysis, optimization results are used to explain complex interactions between engine design parameters, such as nozzle design, injection timing, swirl, exhaust gas recirculation, bore size, and piston bowl shape. Computational Optimization of Internal Combustion Engines demonstrates that the current multi-dimensional CFD tools are mature enough for practical development of internal combustion engines. It is written for researchers and designers in mechanical engineering and the automotive industry.
Download or read book Simulation and Optimization of Internal Combustion Engines written by Zhiyu Han and published by SAE International. This book was released on 2021-12-28 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulation and Optimization of Internal Combustion Engines provides the fundamentals and up-to-date progress in multidimensional simulation and optimization of internal combustion engines. While it is impossible to include all the models in a single book, this book intends to introduce the pioneer and/or the often-used models and the physics behind them providing readers with ready-to-use knowledge. Key issues, useful modeling methodology and techniques, as well as instructive results, are discussed through examples. Readers will understand the fundamentals of these examples and be inspired to explore new ideas and means for better solutions in their studies and work. Topics include combustion basis of IC engines, mathematical descriptions of reactive flow with sprays, engine in-cylinder turbulence, fuel sprays, combustions and pollutant emissions, optimization of direct-injection gasoline engines, and optimization of diesel and alternative fuel engines.
Download or read book Mechanical And Electronics Engineering Proceedings Of The International Conference On Icmee 2009 written by Venkatesh Mahadevan and published by World Scientific. This book was released on 2009-07-16 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2009 International Conference on Mechanical and Electronics Engineering (ICMEE 2009) will be held in Chennai, India from 24-26 July, 2009. The aim of ICMEE 2009 is to provide a platform for researchers, engineers, academicians as well as industrial professionals from all over the world to present their research findings and development activities in mechanical and electronics engineering. This conference provides opportunities for the delegates to exchange new ideas and application experiences face to face, to forge new business or research relations and to find global partners for future collaboration.
Download or read book Proceedings of the 2000 Fall Technical Conference of the ASME Internal Combustion Engine Division In cylinder flows and combustion processes written by American Society of Mechanical Engineers. Internal Combustion Engine Division. Technical Conference and published by . This book was released on 2000 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of the September 2000 conference are presented in three slim volumes, each with its own title indicating the scope of the material covered: v.1, In-Cylinder Flows and Combustion Processes (17 contributions); v.2, Large Bore Engine Designs, Natural Gas Engines, and Alternative Fuels (
Download or read book Internal Combustion Engines written by Allan T. Kirkpatrick and published by John Wiley & Sons. This book was released on 2020-08-28 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive resource covering the foundational thermal-fluid sciences and engineering analysis techniques used to design and develop internal combustion engines Internal Combustion Engines: Applied Thermosciences, Fourth Edition combines foundational thermal-fluid sciences with engineering analysis techniques for modeling and predicting the performance of internal combustion engines. This new 4th edition includes brand new material on: New engine technologies and concepts Effects of engine speed on performance and emissions Fluid mechanics of intake and exhaust flow in engines Turbocharger and supercharger performance analysis Chemical kinetic modeling, reaction mechanisms, and emissions Advanced combustion processes including low temperature combustion Piston, ring and journal bearing friction analysis The 4th Edition expands on the combined analytical and numerical approaches used successfully in previous editions. Students and engineers are provided with several new tools for applying the fundamental principles of thermodynamics, fluid mechanics, and heat transfer to internal combustion engines. Each chapter includes MATLAB programs and examples showing how to perform detailed engineering computations. The chapters also have an increased number of homework problems with which the reader can gauge their progress and retention. All the software is ‘open source’ so that readers can see in detail how computational analysis and the design of engines is performed. A companion website is also provided, offering access to the MATLAB computer programs.
Download or read book Migration of Hydrocarbons in Sedimentary Basins written by Brigitte Doligez and published by Editions TECHNIP. This book was released on 1987 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Department of the Interior and related agencies appropriations for 1989 written by United States. Congress. House. Committee on Appropriations. Subcommittee on Department of the Interior and Related Agencies and published by . This book was released on 1988 with total page 1572 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Department of the Interior and Related Agencies Appropriations for 1989 Justification of the budget estimates Department of Energy written by United States. Congress. House. Committee on Appropriations. Subcommittee on Department of the Interior and Related Agencies and published by . This book was released on 1988 with total page 1586 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computer Simulation Of Spark Ignition Engine Processes written by V. Ganesan and published by Universities Press. This book was released on 1996 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the theory and computer programs for the simulation of spark ignition (SI) engine processes. It starts with the fundamental concepts and goes on to the advanced level and can thus be used by undergraduates, postgraduates and Ph. D. scholars.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1985 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Department of the Interior and Related Agencies Appropriations for 1988 Department of Energy written by United States. Congress. House. Committee on Appropriations. Subcommittee on Department of the Interior and Related Agencies and published by . This book was released on 1987 with total page 1438 pages. Available in PDF, EPUB and Kindle. Book excerpt:
