Download or read book Catalytic Hydrogenation written by L. Cervený and published by Elsevier. This book was released on 1986-08-01 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: The collection of contributions in this volume presents the most up-to-date findings in catalytic hydrogenation. The individual chapters have been written by 36 top specialists each of whom has achieved a remarkable depth of coverage when dealing with his particular topic. In addition to detailed treatment of the most recent problems connected with catalytic hydrogenations, the book also contains a number of previously unpublished results obtained either by the authors themselves or within the organizations to which they are affiliated.Because of its topical and original character, the book provides a wealth of information which will be invaluable not only to researchers and technicians dealing with hydrogenation, but also to all those concerned with homogeneous and heterogeneous catalysis, organic technology, petrochemistry and chemical engineering.
Download or read book Plasma Catalysis written by Annemie Bogaerts and published by MDPI. This book was released on 2019-04-02 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma catalysis is gaining increasing interest for various gas conversion applications, such as CO2 conversion into value-added chemicals and fuels, N2 fixation for the synthesis of NH3 or NOx, methane conversion into higher hydrocarbons or oxygenates. It is also widely used for air pollution control (e.g., VOC remediation). Plasma catalysis allows thermodynamically difficult reactions to proceed at ambient pressure and temperature, due to activation of the gas molecules by energetic electrons created in the plasma. However, plasma is very reactive but not selective, and thus a catalyst is needed to improve the selectivity. In spite of the growing interest in plasma catalysis, the underlying mechanisms of the (possible) synergy between plasma and catalyst are not yet fully understood. Indeed, plasma catalysis is quite complicated, as the plasma will affect the catalyst and vice versa. Moreover, due to the reactive plasma environment, the most suitable catalysts will probably be different from thermal catalysts. More research is needed to better understand the plasma–catalyst interactions, in order to further improve the applications.
Download or read book Chemistry of Thioamides written by Toshiaki Murai and published by Springer. This book was released on 2020-08-14 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers whole aspects of the sulfur isologues of amides. Starting from the synthetic methods of thioamides, a range of synthetic applications to the construction of carbon–sulfur and carbon–carbon bonds, to asymmetric reactions, to formation of heterocycles are described. Among the array of thiocarbonyl compounds, thioamides are readily handled in room temperature air. Some of their characteristic features are that the polarity of C=S bonds in thioamides is much smaller than C=O bonds in ordinary amides, that thioamides possess higher HOMO and lower LUMO when compared with those of ordinary amides, and that carbon atoms alpha to the C=S and nitrogen atoms in thioamides are more acidic than those in ordinary amides. Theoretical studies further disclose their features. Thioamides are also used as ligands to a wide variety of metals. Their unique photophysical properties and catalytic activities are described here. Characteristic features of biologically relevant thioamides, e.g., thiopeptides and related compounds, are the final focus of the book.
Download or read book CO2 Hydrogenation Catalysis written by Yuichiro Himeda and published by John Wiley & Sons. This book was released on 2021-06-28 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to the effective catalysts and latest advances in CO2 conversion in chemicals and fuels Carbon dioxide hydrogenation is one of the most promising and economic techniques to utilize CO2 emissions to produce value-added chemicals. With contributions from an international team of experts on the topic, CO2 Hydrogenation Catalysis offers a comprehensive review of the most recent developments in the catalytic hydrogenation of carbon dioxide to formic acid/formate, methanol, methane, and C2+ products. The book explores the electroreduction of carbon dioxide and contains an overview on hydrogen production from formic acid and methanol. With a practical review of the advances and challenges in future CO2 hydrogenation research, the book provides an important guide for researchers in academia and industry working in the field of catalysis, organometallic chemistry, green and sustainable chemistry, as well as energy conversion and storage. This important book: Offers a unique review of effective catalysts and the latest advances in CO2 conversion Explores how to utilize CO2 emissions to produce value-added chemicals and fuels such as methanol, olefins, gasoline, aromatics Includes the latest research in homogeneous and heterogeneous catalysis as well as electrocatalysis Highlights advances and challenges for future investigation Written for chemists, catalytic chemists, electrochemists, chemists in industry, and chemical engineers, CO2 Hydrogenation Catalysis offers a comprehensive resource to understanding how CO2 emissions can create value-added chemicals.
Download or read book An Introduction to Organosulfur Chemistry written by R. J. Cremlyn and published by John Wiley & Sons. This book was released on 1996-12-23 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sulfur chemistry is becoming increasingly important as the role of this element is explored in both biological and environmental fields. After the initial chapters have discussed the synthesis, reactivity, and properties of the compounds in general, each of the next nine chapters takes a specific sulfur containing functional group and expands the discussion on synthetic procedures. The final chapter looks at the major uses of organo-sulfur compounds and their impact on biological and environmental areas.
Download or read book Magnetic Nanomaterials written by Stefan H Bossmann and published by Royal Society of Chemistry. This book was released on 2017-06-02 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Details the frontier of magnetic nanotechnology from the persepctive of scientists, engineers and physicians that have shaped this unique and highly collaborative field of research.
Download or read book Homogeneous Hydrogenation written by P.A. Chaloner and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Homogeneous hydrogenation is one of the most thoroughly studied fields of homogeneous catalysis. The results of these studies have proved to be most important for an understanding of the underlying principles of the activation of small molecules by transition metal complexes. During the past three decades homogeneous hydrogenation has found widespread application in organic chemistry, including the production of important pharmaceuticals, especially where a sophisticated degree of selectivity is required. This volume presents a general account of the main principles and applications of homogeneous hydrogenation by transition metal complexes. Special attention is devoted to the mechanisms by which these processes occur, and the role of the recently discovered complexes of molecular hydrogen is described. Sources of hydrogen, other than H2, are also considered (transfer hydrogenation). The latest achievements in highly stereoselective hydrogenations have made possible many new applications in organic synthesis. These applications are documented by giving details of the reduction of important unsaturated substrates (alkenes, alkynes, aldehydes and ketones, nitrocompounds, etc.). Hydrogenation in biphasic and phase transfer catalyzed systems is also described. Finally, a discussion of the biochemical routes of H2 activation highlights the similarities and differences in performing hydrogenation in both natural and synthetic systems. For researchers working in the fields of homogeneous catalysis, especially in areas such as pharmaceuticals, plastics and fine chemicals.
Download or read book Catalytic Technology for Selective Hydrogenation of Benzene to Cyclohexene written by Zhongyi Liu and published by Springer. This book was released on 2020-10-13 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive description of the catalytic technologies for selective hydrogenation of benzene to cyclohexene. Focusing on selective hydrogenation of benzene to prepare cyclohexene and its downstream products, such as cyclohexanone, bulk chemicals and high-value fine chemicals, it also discusses the objective laws, reaction mechanisms and scientific significance based on experimental data, analysis and characterization results. Given its scope, the book will appeal to a broad readership, particularly professionals at universities and scientific research institutes, senior undergraduates, master's and doctoral graduate students as well as practitioners in industry.
Download or read book Computational Catalysis written by Aravind Asthagiri and published by Royal Society of Chemistry. This book was released on 2014 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive review of the methods and approaches being adopted to push forward the boundaries of computational catalysis.
Download or read book Basic Principles of Organic Chemistry written by John D. Roberts and published by . This book was released on 1977 with total page 1596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction what is organic chemistry all about?; Structural organic chemistry the shapes of molecules functional groups; Organic nomenclature; Alkanes; Stereoisomerism of organic molecules; Bonding in organic molecules atomic-orbital models; More on nomenclature compounds other than hydrocarbons; Nucleophilic substitution and elimination reactions; Separation and purification identification of organic compounds by spectroscopic techniques; Alkenes and alkynes. Ionic and radical addition reactions; Alkenes and alkynes; Oxidation and reduction reactions; Acidity or alkynes.
Download or read book New Materials for Catalytic Applications written by Vasile I. Parvulescu and published by Elsevier. This book was released on 2016-01-28 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Materials for Catalytic Applications proposes the use of both new and existing materials for catalytic applications, such as zeolites, metal oxides, microporous and mesoporous materials, and monocrystals. In addition, metal-oxides are discussed from a new perspective, i.e. nano- and photocatalytic applications. The material presents these concepts with a new focus on strategies in synthesis, synthesis based on a rational design, the correlation between basic properties/potential applications, and new catalytic solutions for acid-base, redox, hydrogenation, photocatalytic reactions, etc. - Presents organometallic concepts for the synthesis of nanocatalysts - Provides a synthesis of new materials following the fluorolytic sol-gel concept - Covers electronic and photocatalytic properties via synthesis of nano-oxide materials - Details the nature of sites in MOFs generating catalytic properties immobilization of triflates in solid matrices for organic reactions
Download or read book Catalysis Looks to the Future written by National Research Council and published by National Academies Press. This book was released on 1992-02-01 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: The impact of catalysis on the nation's economy is evidenced by the fact that catalytic technologies generate U.S. sales in excess of $400 billion per year and a net positive balance of trade of $16 billion annually. This book outlines recent accomplishments in the science and technology of catalysis and summarizes important likely challenges and opportunities on the near horizon. It also presents recommendations for investment of financial and human resources by industry, academe, national laboratories, and relevant federal agencies if the nation is to maintain continuing leadership in this fieldâ€"one that is critical to the chemical and petroleum processing industries, essential for energy-efficient means for environmental protection, and vital for the production of a broad range of pharmaceuticals.
Download or read book Manganese Catalysis in Organic Synthesis written by Jean-Baptiste Sortais and published by John Wiley & Sons. This book was released on 2021-12-20 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manganese Catalysis in Organic Synthesis A must-read reference for anyone interested in catalyst design and sustainable organic synthesis In Manganese Catalysis in Organic Synthesis, distinguished researcher Jean-Baptiste Sortais delivers an insightful and robust overview of the use of manganese in homogenous catalysis. The editor includes papers from authoritative academics describing the organometallic precursors used to develop manganese catalysts and covers critical applications in organic synthesis, including reduction to oxidation reactions, C-C, C-N, C-X bond formation reactions, cross-coupling reactions, C-H bond activation to dihydroxylation and epoxidation reactions. Manganese Catalysis in Organic Synthesis is a practical resource for every organic chemist in academia and industry with an interest in non-noble metal catalysis, organic synthesis, and sustainable chemistry. It is intuitively and clearly organized, covering the most important synthetic procedures using homogenous manganese catalysts. It is also the ideal companion to works like Cobalt Catalysis in Organic Synthesis, Nickel Catalysis in Organic Synthesis, and Iron Complexes in Catalysis. Readers will also enjoy: Thorough introductions to organometallic manganese compounds in organic synthesis and manganese-catalyzed hydrogenation and hydrogen transfer reactions A comprehensive exploration of manganese-catalyzed hydrogen borrowing reactions and dehydrogenative coupling reactions Practical discussions of manganese-catalyzed hydrosilylation and hydroboration reactions and manganese-catalyzed electro- and photocatalysis transformations In-depth examinations of manganese-catalyzed C-H oxygenation reactions and manganese-catalyzed organometallic C-H activation Insightful treatments of manganese-catalyzed cross-coupling processes and manganese(III) acetate mediated cyclizations Perfect for catalytic, organic, and pharmaceutical chemists, Manganese Catalysis in Organic Synthesis deserves a place in the libraries of researchers and professionals interested in catalyst design and sustainable organic synthesis.
Download or read book Metallosurfactants written by Surinder K. Mehta and published by John Wiley & Sons. This book was released on 2022-05-31 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallosurfactants Provides up-to-date coverage of the synthesis, properties, and applications of metallosurfactants Metallosurfactants: From Fundamentals to Catalytic and Biomedical Applications is a thorough introduction to amphiphilic compounds that allow to incorporate metal ions in the surfactant system. This comprehensive reference and guide describes the fundamentals of metal surfactant complexes, highlights recent advances in the field, and explores current and future applications and research areas. Gradually progressing from basic to advanced topics, the authors first explain the classification and characterization of metallosurfactants before delving into more complex concepts and various catalytic, sensing, and biomedical applications. The book begins with coverage of the synthesis of metallosurfactants and their surface, interfacial, and aggregation behavior. Subsequent chapters discuss applications of metallosurfactants in areas such as drug delivery, molecular machines, transfection, nanoparticle synthesis, and carbon monoxide-releasing molecules (CORMs). Other topics include the use of metallosurfactants as catalysts in organic reactions, and as anticancer and antimicrobial agents in drug delivery and formulation. This unique reference Provides an overview of the structure-function relationship, synthesis methods, and characterization of metallosurfactants Reviews current trends in metallosurfactant development and research Examines the use of metallosurfactants in a wide range of reactions, including esterolytic reactions and hydrogen generation Discusses advanced applications of metallosurfactants, e.g. as nanoreactors for nanoparticle synthesis, non-viral transfection vectors, and sensors Metallosurfactants: From Fundamentals to Catalytic and Biomedical Applications is an excellent introduction to the growing field of metallosurfactant chemistry as well as a concise, highly useful reference for researchers and scientists in both academia and industry.
Download or read book Cobalt Catalysis in Organic Synthesis written by Marko Hapke and published by John Wiley & Sons. This book was released on 2020-04-06 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a much-needed account of the formidable "cobalt rush" in organic synthesis and catalysis Over the past few decades, cobalt has turned into one of the most promising metals for use in catalytic reactions, with important applications in the efficient and selective synthesis of natural products, pharmaceuticals, and new materials. Cobalt Catalysis in Organic Synthesis: Methods and Reactions provides a unique overview of cobalt-catalysed and -mediated reactions applied in modern organic synthesis. It covers a broad range of homogeneous reactions, like cobalt-catalysed hydrogenation, hydrofunctionalization, cycloaddition reactions, C-H functionalization, as well as radical and biomimetic reactions. First comprehensive book on this rapidly evolving research area Covers a broad range of homogeneous reactions, such as C-H activation, cross-coupling, synthesis of heterocyclic compounds (Pauson-Khand), and more Chapters on low-valent cobalt complexes as catalysts in coupling reactions, and enantioselective cobalt-catalyzed transformations are also included Can be used as a supplementary reader in courses of advanced organic synthesis and organometallic chemistry Cobalt Catalysis in Organic Synthesis is an ideal book for graduates and researchers in academia and industry working in the field of synthetic organic chemistry, catalysis, organometallic chemistry, and natural product synthesis.
Download or read book Catalytic Hydrogenation for Biomass Valorization written by Roberto Rinaldi and published by Royal Society of Chemistry. This book was released on 2015 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the biorefinery industry expands to meet the latest discoveries in biomass conversion, this book provides a thorough grounding in the subject.
Download or read book Chemical Engineering in the Pharmaceutical Industry written by Mary T. am Ende and published by John Wiley & Sons. This book was released on 2019-04-08 with total page 1435 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to the important chemical engineering concepts for the development of new drugs, revised second edition The revised and updated second edition of Chemical Engineering in the Pharmaceutical Industry offers a guide to the experimental and computational methods related to drug product design and development. The second edition has been greatly expanded and covers a range of topics related to formulation design and process development of drug products. The authors review basic analytics for quantitation of drug product quality attributes, such as potency, purity, content uniformity, and dissolution, that are addressed with consideration of the applied statistics, process analytical technology, and process control. The 2nd Edition is divided into two separate books: 1) Active Pharmaceutical Ingredients (API’s) and 2) Drug Product Design, Development and Modeling. The contributors explore technology transfer and scale-up of batch processes that are exemplified experimentally and computationally. Written for engineers working in the field, the book examines in-silico process modeling tools that streamline experimental screening approaches. In addition, the authors discuss the emerging field of continuous drug product manufacturing. This revised second edition: Contains 21 new or revised chapters, including chapters on quality by design, computational approaches for drug product modeling, process design with PAT and process control, engineering challenges and solutions Covers chemistry and engineering activities related to dosage form design, and process development, and scale-up Offers analytical methods and applied statistics that highlight drug product quality attributes as design features Presents updated and new example calculations and associated solutions Includes contributions from leading experts in the field Written for pharmaceutical engineers, chemical engineers, undergraduate and graduation students, and professionals in the field of pharmaceutical sciences and manufacturing, Chemical Engineering in the Pharmaceutical Industry, Second Edition contains information designed to be of use from the engineer's perspective and spans information from solid to semi-solid to lyophilized drug products.
