Download or read book Studies into Additive Manufacturing for In Space Manufacturing written by Rani Elhajjar and published by SAE International. This book was released on 2016-08-11 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) for space exploration has become a growing opportunity as long-range space missions evolve. In partnership with the National Space Grant Foundation and NASA, students from the University of Wisconsin-Milwaukee participated in the 2014-15 X-Hab Academic Innovation Challenge, with participants tasked with developing new AM solutions that would be recyclable with minimal loss in mechanical properties. The teams investigated materials, characterization, testing, modeling, and tool development, including the ability to employ reusable carbon-fiber tension ties. The tools developed show that it is possible to employ thermoplastic polymer materials fabricated using AM together with reusable and flexible high-performance carbon-fiber-based composite ties. The AM-printed part is completely recyclable. The carbon-fiber composite ties are repurposed into new structural configurations without loss in properties. The results of this project are now published by SAE International. Studies into Additive Manufacturing for In-Space Manufacturing is a series of interconnected papers that explore: Lessons learned in processing of recycled thermoplastic filaments The criticality of process control on the print process The effects of orientation angles and print parameters on mechanical behavior Microstructural analysis Case studies of tools included in the spacecraft's toolbox

Download or read book Studies Into Additive Manufacturing for In Space Manufacturing written by Rani Ellhajjar and published by . This book was released on 2016 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) for space exploration has become a growing opportunity as long-range space missions evolve. In partnership with the National Space Grant Foundation and NASA, students from the University of Wisconsin-Milwaukee participated in the 2014-15 X-Hab Academic Innovation Challenge, with participants tasked with developing new AM solutions that would be recyclable with minimal loss in mechanical properties. The teams investigated materials, characterization, testing, modeling, and tool development, including the ability to employ reusable carbon-fiber tension ties. The tools.

Download or read book 3D Printing in Space written by National Research Council (U.S.). Committee on Space-Based Additive Manufacturing and published by . This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing has the potential to positively affect human spaceflight operations by enabling the in-orbit manufacture of replacement parts and tools, which could reduce existing logistics requirements for the International Space Station and future long-duration human space missions. The benefits of in-space additive manufacturing for robotic spacecraft are far less clear, although this rapidly advancing technology can also potentially enable space-based construction of large structures and, perhaps someday, substantially in the future, entire spacecraft. Additive manufacturing can also help to reimagine a new space architecture that is not constrained by the design and manufacturing confines of gravity, current manufacturing processes, and launch-related structural stresses. The specific benefits and potential scope of additive manufacturing remain undetermined. The realities of what can be accomplished today, using this technology on the ground, demonstrate the substantial gaps between the vision for additive manufacturing in space and the limitations of the technology and the progress that has to be made to develop it for space use. 3D Printing in Space evaluates the prospects of in-space additive manufacturing. This report examines the various technologies available and currently in development, and considers the possible impacts for crewed space operations and robotic spacecraft operations. Ground-based additive manufacturing is being rapidly developed by industry, and 3D Printing in Space discusses government-industry investments in technology development. According to this report, the International Space Station provides an excellent opportunity for both civilian and military research on additive manufacturing technology. Additive manufacturing presents potential opportunities, both as a tool in a broad toolkit of options for space-based activities and as a potential paradigm-changing approach to designing hardware for in-space activities. This report makes recommendations for future research, suggests objectives for an additive manufacturing roadmap, and envisions opportunities for cooperation and joint development.

Download or read book Studies into Additive Manufacturing for In Space Manufacturing written by Rani Elhajjar and published by SAE International. This book was released on 2016-08-11 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) for space exploration has become a growing opportunity as long-range space missions evolve. In partnership with the National Space Grant Foundation and NASA, students from the University of Wisconsin-Milwaukee participated in the 2014-15 X-Hab Academic Innovation Challenge, with participants tasked with developing new AM solutions that would be recyclable with minimal loss in mechanical properties. The teams investigated materials, characterization, testing, modeling, and tool development, including the ability to employ reusable carbon-fiber tension ties. The tools developed show that it is possible to employ thermoplastic polymer materials fabricated using AM together with reusable and flexible high-performance carbon-fiber-based composite ties. The AM-printed part is completely recyclable. The carbon-fiber composite ties are repurposed into new structural configurations without loss in properties. The results of this project are now published by SAE International. Studies into Additive Manufacturing for In-Space Manufacturing is a series of interconnected papers that explore: Lessons learned in processing of recycled thermoplastic filaments The criticality of process control on the print process The effects of orientation angles and print parameters on mechanical behavior Microstructural analysis Case studies of tools included in the spacecraft's toolbox

Download or read book Additive Manufacturing for the Aerospace Industry written by Francis H. Froes and published by Elsevier. This book was released on 2019-02-15 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing for the Aerospace Industry explores the design, processing, metallurgy and applications of additive manufacturing (AM) within the aerospace industry. The book's editors have assembled an international team of experts who discuss recent developments and the future prospects of additive manufacturing. The work includes a review of the advantages of AM over conventionally subtractive fabrication, including cost considerations. Microstructures and mechanical properties are also presented, along with examples of components fabricated by AM. Readers will find information on a broad range of materials and processes used in additive manufacturing. It is ideal reading for those in academia, government labs, component fabricators, and research institutes, but will also appeal to all sectors of the aerospace industry. Provides information on a broad range of materials and processes used in additive manufacturing Presents recent developments in the design and applications of additive manufacturing specific to the aerospace industry Covers a wide array of materials for use in the additive manufacturing of aerospace parts Discusses current standards in the area of aerospace AM parts

Download or read book Innovative Processes and Materials in Additive Manufacturing written by Sunpreet Singh and published by Woodhead Publishing. This book was released on 2022-09-06 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovative Processes and Materials in Additive Manufacturing explains game-changing interdisciplinary applications of recent research breakthroughs in additive manufacturing technology. The number of research publications addressing additive manufacturing has soared in recent years as a range of disciplines explore the possibilities that this technology can provide. This book acts as a bridge between this high-level research and the large number of academics and practitioners looking to additive manufacturing for innovative solutions, providing them with practical and approachable information. Applications in aerospace, automotive, medical, construction, and food industries are addressed, featuring technical details that will help successful implementation. This unique book also provides broad coverage of the theory behind this emerging technology, including material development, as well as the technical details required for readers to investigate the novel applications of the involved methods for themselves. Includes case studies from the aerospace, construction and medical industries Features innovations in the integration of additive manufacturing processes with other manufacturing technologies Identifies exciting routes for future research and application areas of additive manufacturing

Download or read book Additive Manufacturing written by T.S. Srivatsan and published by CRC Press. This book was released on 2015-09-25 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Get Ready for the Future of Additive ManufacturingAdditive Manufacturing: Innovations, Advances, and Applications explores the emerging field of additive manufacturing (AM)-the use of 3D printing to make prototype parts on demand. Often referred to as the third industrial revolution, AM offers many advantages over traditional manufacturing. This pr

Download or read book Additive Manufacturing written by Amit Bandyopadhyay and published by CRC Press. This book was released on 2015-09-08 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of additive manufacturing has seen explosive growth in recent years due largely in part to renewed interest from the manufacturing sector. Conceptually, additive manufacturing, or industrial 3D printing, is a way to build parts without using any part-specific tooling or dies from the computer-aided design (CAD) file of the part. Today, mo

Download or read book Orbital Debris written by National Research Council and published by National Academies Press. This book was released on 1995-07-07 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the beginning of space flight, the collision hazard in Earth orbit has increased as the number of artificial objects orbiting the Earth has grown. Spacecraft performing communications, navigation, scientific, and other missions now share Earth orbit with spent rocket bodies, nonfunctional spacecraft, fragments from spacecraft breakups, and other debris created as a byproduct of space operations. Orbital Debris examines the methods we can use to characterize orbital debris, estimates the magnitude of the debris population, and assesses the hazard that this population poses to spacecraft. Potential methods to protect spacecraft are explored. The report also takes a close look at the projected future growth in the debris population and evaluates approaches to reducing that growth. Orbital Debris offers clear recommendations for targeted research on the debris population, for methods to improve the protection of spacecraft, on methods to reduce the creation of debris in the future, and much more.

Download or read book Design for Additive Manufacturing written by Martin Leary and published by Elsevier. This book was released on 2019-12-03 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design for Additive Manufacturing is a complete guide to design tools for the manufacturing requirements of AM and how they can enable the optimization of process and product parameters for the reduction of manufacturing costs and effort. This timely synopsis of state-of-the-art design tools for AM brings the reader right up-to-date on the latest methods from both academia and industry. Tools for both metallic and polymeric AM technologies are presented and critically reviewed, along with their manufacturing attributes. Commercial applications of AM are also explained with case studies from a range of industries, thus demonstrating best-practice in AM design. Covers all the commonly used tools for designing for additive manufacturing, as well as descriptions of important emerging technologies Provides systematic methods for optimizing AM process selection for specific production requirement Addresses design tools for both metallic and polymeric AM technologies Includes commercially relevant case studies that showcase best-practice in AM design, including the biomedical, aerospace, defense and automotive sectors

Download or read book High Performance Composite Structures written by A. Praveen Kumar and published by Springer Nature. This book was released on 2021-12-08 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers advanced 3D printing processes and the latest developments in novel composite-based printing materials, thus enabling the reader to understand and benefit from the advantages of this groundbreaking technology. The rise in ecological anxieties has forced scientists and researchers from all over the world to find novel lightweight materials. Therefore, it is necessary to expand knowledge about the processing, applications, and challenges of 3D printing of composite materials to expanding the range of their application. This book presents an extensive survey on recent improvements in the research and development of additive manufacturing technologies that are used to make composite structures for various applications such as electronic, aerospace, construction, and biomedical applications. Advanced printing techniques including fused deposition modeling (FDM), selective laser sintering (SLS), selective laser melting (SLM), electron beam melting (EBM), inkjet 3D printing (3DP), stereolithography (SLA), and 3D plotting will be covered and discussed thoroughly in this book. This book also focuses the recent advances and challenges in polymer nanocomposite and introduces potential applications of these materials in various sectors.

Download or read book Additive Manufacturing written by M. Manjaiah and published by Woodhead Publishing. This book was released on 2021-07-17 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing: A Tool for Industrial Revolution 4.0 explores the latest developments, underlying mechanisms, challenges and opportunities for 3D printing in a digital manufacturing environment. It uses an international panel of experts to explain how additive manufacturing processes have been successfully integrated with industry 4.0 technologies for increased technical capabilities, efficiency, flexibility and sustainability. The full manufacturing product cycle is addressed, including design, materials, mechanical properties, and measurement. Future directions for this important technological intersection are also explored. This book will interest researchers and industrial professionals in industrial engineering, digital manufacturing, advanced manufacturing, data science applications, and computer engineering. Addresses a wide range of additive manufacturing technology, including processes, controls and operation Explains many new and sustainable additive manufacturing methods Provides detailed descriptions on how to modernize and optimize conventional additive manufacturing methodologies in order to take full advantage of synergies with industry 4.0

Download or read book Additive Manufacturing with Medical Applications written by Harish Kumar Banga and published by CRC Press. This book was released on 2022-08-31 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference text discusses integrated approaches to improve the objectives of additive manufacturing in medical application. The text covers case studies related to product design and development, discuses biomaterials, applications of artificial intelligence and machine learning using additive manufacturing techniques. It covers important topics including 3D printing technology, materials for 3D printing in medicine, rapid prototyping in clinical applications, and use of additive manufacturing in customized bone tissue engineering scaffold. The text- Discusses additive manufacturing techniques and their utilization in medical applications. Covers important applications of additive manufacturing in the fields of medicine, education and space industry. Explores regulatory challenges associated with the emergence of additive manufacturing. Examines the use of rapid prototyping in clinical applications. The text will serve as a useful reference guide for graduate students and academic researchers in the fields of industrial engineering, manufacturing science, mechanical engineering, and aerospace engineering. This book discusses important application areas of additive manufacturing, including medicine, education, and the space industry, this reference text will be a serve as a useful text for graduate students and academic researchers in the fields of industrial engineering, manufacturing science, mechanical engineering, and aerospace engineering.

Download or read book Predictive Theoretical and Computational Approaches for Additive Manufacturing written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2016-12-21 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) methods have great potential for promoting transformative research in many fields across the vast spectrum of engineering and materials science. AM is one of the leading forms of advanced manufacturing which enables direct computer-aided design (CAD) to part production without part-specific tooling. In October 2015 the National Academies of Sciences, Engineering, and Medicine convened a workshop of experts from diverse communities to examine predictive theoretical and computational approaches for various AM technologies. While experimental workshops in AM have been held in the past, this workshop uniquely focused on theoretical and computational approaches and involved areas such as simulation-based engineering and science, integrated computational materials engineering, mechanics, materials science, manufacturing processes, and other specialized areas. This publication summarizes the presentations and discussions from the workshop.

Download or read book Process Structure Properties in Polymer Additive Manufacturing written by Swee Leong Sing and published by MDPI. This book was released on 2021-09-01 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) methods have grown and evolved rapidly in recent years. AM for polymers is an exciting field and has great potential in transformative and translational research in many fields, such as biomedical, aerospace, and even electronics. Current methods for polymer AM include material extrusion, material jetting, vat polymerisation, and powder bed fusion. With the promise of more applications, detailed understanding of AM—from the processability of the feedstock to the relationship between the process–structure–properties of AM parts—has become more critical. More research work is needed in material development to widen the choice of materials for polymer additive manufacturing. Modelling and simulations of the process will allow the prediction of microstructures and mechanical properties of the fabricated parts while complementing the understanding of the physical phenomena that occurs during the AM processes. In this book, state-of-the-art reviews and current research are collated, which focus on the process–structure–properties relationships in polymer additive manufacturing.

Download or read book Using Space Resources written by Thomas A. Sullivan and published by . This book was released on 1991 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Additive Manufacturing of Metals The Technology Materials Design and Production written by Li Yang and published by Springer. This book was released on 2017-05-11 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a unique guide to the three-dimensional (3D) printing of metals. It covers various aspects of additive, subtractive, and joining processes used to form three-dimensional parts with applications ranging from prototyping to production. Examining a variety of manufacturing technologies and their ability to produce both prototypes and functional production-quality parts, the individual chapters address metal components and discuss some of the important research challenges associated with the use of these technologies. As well as exploring the latest technologies currently under development, the book features unique sections on electron beam melting technology, material lifting, and the importance this science has in the engineering context. Presenting unique real-life case studies from industry, this book is also the first to offer the perspective of engineers who work in the field of aerospace and transportation systems, and who design components and manufacturing networks. Written by the leading experts in this field at universities and in industry, it provides a comprehensive textbook for students and an invaluable guide for practitioners