Download or read book Structures and Properties of Rubberlike Networks written by Burak Erman and published by Oxford University Press, USA. This book was released on 1997 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rubber elasticity is an important sub-field of polymer science. This book is in many ways a sequel to the authors' previous, more introductory book, Rubberlike Elasticity: A Molecular Primer (Wiley-Interscience, 1988), and will in some respects replace the now classic book by L.R.G. Treloar, The Physics of Rubber Elasticity (Oxford, 1975). The present book has much in common with its predecessor, in particular its strong emphasis on molecular concepts and theories. Similarly, only equilibrium properties are covered in any detail. Though this book treats much of the same subject matter, it is a more comprehensive, more up-to-date, and somewhat more sophisticated treatment.

Download or read book Structures and Properties of Rubberlike Networks written by Burak Erman and published by Oxford University Press. This book was released on 1997-07-24 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rubber elasticity is an important sub-field of polymer science. This book is in many ways a sequel to the authors' previous, more introductory book, Rubberlike Elasticity: A Molecular Primer (Wiley-Interscience, 1988), and will in some respects replace the now classic book by L.R.G. Treloar, The Physics of Rubber Elasticity (Oxford, 1975). The present book has much in common with its predecessor, in particular its strong emphasis on molecular concepts and theories. Similarly, only equilibrium properties are covered in any detail. Though this book treats much of the same subject matter, it is a more comprehensive, more up-to-date, and somewhat more sophisticated treatment.

Download or read book Introduction to Physical Polymer Science written by Leslie H. Sperling and published by John Wiley & Sons. This book was released on 2015-02-02 with total page 815 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Updated Edition of the Classic Text Polymers constitute the basis for the plastics, rubber, adhesives, fiber, and coating industries. The Fourth Edition of Introduction to Physical Polymer Science acknowledges the industrial success of polymers and the advancements made in the field while continuing to deliver the comprehensive introduction to polymer science that made its predecessors classic texts. The Fourth Edition continues its coverage of amorphous and crystalline materials, glass transitions, rubber elasticity, and mechanical behavior, and offers updated discussions of polymer blends, composites, and interfaces, as well as such basics as molecular weight determination. Thus, interrelationships among molecular structure, morphology, and mechanical behavior of polymers continue to provide much of the value of the book. Newly introduced topics include: Nanocomposites, including carbon nanotubes and exfoliated montmorillonite clays The structure, motions, and functions of DNA and proteins, as well as the interfaces of polymeric biomaterials with living organisms The glass transition behavior of nano-thin plastic films In addition, new sections have been included on fire retardancy, friction and wear, optical tweezers, and more. Introduction to Physical Polymer Science, Fourth Edition provides both an essential introduction to the field as well as an entry point to the latest research and developments in polymer science and engineering, making it an indispensable text for chemistry, chemical engineering, materials science and engineering, and polymer science and engineering students and professionals.

Download or read book Protective Coatings written by Mei Wen and published by Springer. This book was released on 2017-05-26 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on characterization of organic coatings by different testing methods and understanding of structure formation and materials properties. The knowledge of protective organic coatings and current test methods is based largely on empirical experience. This book aims at explaining the coating property changes during film drying and curing in terms of chemical and physical transformations. Current test methods are reviewed with emphasis on understanding their physical basis and expressing the test results in terms of comparable physical quantities. In general, this book provides readers a deeper understanding of the binder design, coating film formation process, properties build-up, appearance and defect formation, and automotive paint application. It also suggests manifold ways to improving the coatings performance. This book is designed for coating professionals to gain deeper understanding of characterization techniques and to select the right ones to solve their coating problems. It is ideal for both experienced and early career scientists and engineers. Also, it is useful for graduate students in the general area of protective coatings.

Download or read book Chemistry Manufacture and Applications of Natural Rubber written by Shinzo Kohjiya and published by Woodhead Publishing. This book was released on 2021-03-24 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry, Manufacture and Applications of Natural Rubber, Second Edition presents the latest advances in the processing, properties and advanced applications of natural rubber (NR), drawing on state-of-the-art research in the field. Chapters cover manufacturing, processing and properties of natural rubber, describing biosynthesis, vulcanization for improved performance, strain-induced crystallization, self-reinforcement, rheology and mechanochemistry for processing, computer simulation of properties, scattering techniques and stabilizing agents. Applications covered include natural rubber, carbon allotropes, eco-friendly soft bio-composites using NR matrices and marine products, the use of NR for high functionality such as shape memory, NR for the tire industry, and natural rubber latex with advanced applications. This is an essential resource for academic researchers, scientists and (post)graduate students in rubber science, polymer science, materials science and engineering, and chemistry. In industry, this book enables professionals, R&D, and producers across the natural rubber, tire, rubber and elastomer industries, as well as across industries looking to use natural rubber products, to understand and utilize natural rubber for cutting-edge applications. Explains the latest manufacture and processing techniques for natural rubber (NR) with enhanced properties Explores novel applications of natural rubber across a range of industries, including current and potential uses Discusses resources and utilization, and considers sustainable future development of natural rubber

Download or read book Constitutive Models for Rubber VIII written by Nere Gil-Negrete and published by CRC Press. This book was released on 2013-06-03 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to their unique properties, rubber materials are found in multiple engineering applications such as tires, engine mounts, shock absorbers, flexible joints, seals, etc. Nevertheless, the complex nature of the behavior of such material makes it difficult to accurately model and predict the performance of these units. The challenge to correctly reproduce the observed characteristics of rubber elements necessitates detailed experimental investigations, development of accurate constitutive models, validation of techniques to identify material parameters and efficient numerical methods. Aspects regarding fatigue and damage in elastomers are not to be left aside, as they influence the durability of the products. State-of-the-art technology in terms of constitutive modeling, numerical implementation, damage and fatigue resistance are strongly represented in these Proceedings, along with insights into advanced elastomers to be used in novel applications. Topics included in this volume are: Ageing, Friction and abrasion, Adhesion, Swelling, Continuum mechanical models and numerical implementation, Hyperelasticity, Micro-mechanical approaches, Fracture and fatigue, Mullins effect, Strain induced crystallization, Thermal effects, Reinforcement and vulcanization, Design and applications, Smart elastomers. Constitutive Models for Rubber VIII is of interest not only for undergraduates, postgraduates, academics and researchers in the discipline, but also for all those design and development engineers in the industry.

Download or read book Transport Processes in Pharmaceutical Systems written by Gordon L. Amidon and published by CRC Press. This book was released on 1999-11-24 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt: This cutting-edge reference clearly explains pharmaceutical transport phenomena, demonstrating applications ranging from drug or nutrient uptake into vesicle or cell suspensions, drug dissolution and absorption across biological membranes, whole body kinetics, and drug release from polymer reservoirs and matrices to heat and mass transport in freeze-drying and hygroscopicity. Focuses on practical applications of drug delivery from a physical and mechanistic perspective, highlighting biological systems. Written by more than 30 international authorities in the field, Transport Processes in Pharmaceutical Systems discusses the crucial relationship between the transport process and thermodynamic factors analyzes the dynamics of diffusion at liquid-liquid, liquid-solid, and liquid-cultured cell interfaces covers prodrug design for improving membrane transport addresses the effects of external stimuli in altering some natural and synthetic polymer matrices examines properties of hydrogels, including synthesis, swelling degree, swelling kinetics, permeability, biocompatibility, and biodegradability presents mass transfer of drugs and pharmacokinetics based on mass balance descriptions and more! Containing over 1000 references and more than 1100 equations, drawings, photographs, micrographs, and tables, Transport Processes in Pharmaceutical Systems is a must-read resource for research pharmacists, pharmaceutical scientists and chemists, chemical engineers, physical chemists, and upper-level undergraduate and graduate students in these disciplines.

Download or read book Molecular Characterization and Analysis of Polymers written by John M. Chalmers and published by Elsevier. This book was released on 2008-12-09 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by expert contributors from the academic and industrial sectors, this book presents traditional and modern approaches to polymer characterization and analysis. The emphasis is on pragmatics, problem solving and property determination; real-world applications provide a context for key concepts. The characterizations focus on organic polymer and polymer product microstructure and composition. Approaches molecular characterization and analysis of polymers from the viewpoint of problem-solving and polymer property characterization, rather than from a technique championing approach Focuses on providing a means to ascertaining the optimum approach or technique(s) to solve a problem/measure a property, and thereby develop an analytical competence in the molecular characterization and analysis of real-world polymer products Provides background on polymer chemistry and microstructure, discussions of polymer chain, morphology, degradation, and product failure and additive analysis, and considers the supporting roles of modeling and high-throughput analysis

Download or read book Applied Plastics Engineering Handbook written by Myer Kutz and published by William Andrew. This book was released on 2016-09-15 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Plastics Engineering Handbook: Processing, Materials, and Applications, Second Edition, covers both the polymer basics that are helpful to bring readers quickly up-to-speed if they are not familiar with a particular area of plastics processing and the recent developments that enable practitioners to discover which options best fit their requirements. New chapters added specifically cover polyamides, polyimides, and polyesters. Hot topics such as 3-D printing and smart plastics are also included, giving plastics engineers the information they need to take these embryonic technologies and deploy them in their own work. With the increasing demands for lightness and fuel economy in the automotive industry (not least due to CAFÉ standards), plastics will soon be used even further in vehicles. A new chapter has been added to cover the technology trends in this area, and the book has been substantially updated to reflect advancements in technology, regulations, and the commercialization of plastics in various areas. Recycling of plastics has been thoroughly revised to reflect ongoing developments in sustainability of plastics. Extrusion processing is constantly progressing, as have the elastomeric materials, fillers, and additives which are available. Throughout the book, the focus is on the engineering aspects of producing and using plastics. The properties of plastics are explained, along with techniques for testing, measuring, enhancing, and analyzing them. Practical introductions to both core topics and new developments make this work equally valuable for newly qualified plastics engineers seeking the practical rules-of-thumb they don't teach you in school and experienced practitioners evaluating new technologies or getting up-to-speed in a new field. Presents an authoritative source of practical advice for engineers, providing guidance from experts that will lead to cost savings and process improvements Ideal introduction for both new engineers and experienced practitioners entering a new field or evaluating a new technology Updated to include the latest technology, including 3D Printing, smart polymers, and thorough coverage of biopolymers and biodegradable plastics

Download or read book Constitutive Models for Rubber IV written by Per-Erik Austrell and published by Routledge. This book was released on 2017-12-04 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: The unique properties of elastomeric materials offer numerous advantages in many engineering applications. Elastomeric units are used as couplings or mountings between rigid components, for example in shock absorbers, vibration insulators, flexible joints, seals and suspensions, etc. However, the complicated nature of the behaviour of such material makes it difficult to accurately predict the performance of these units using finite element modelling, for example. It is imperative that constitutive models accurately capture relevant aspects of mechanical behaviour. The latest developments concerning constitutive modelling of rubber is collected in these Proceedings. Topics included in this volume are, Hyperelastic models, Strength, fracture & fatigue, Dynamic properties & the Fletcher-Gent effect, Micro-mechanical & statistical approaches, Stress softening, iscoelasticity, Filler reinforcement, and Tyres, fibre & cord reinforced rubber.

Download or read book Rubber Science written by Yuko Ikeda and published by Springer Nature. This book was released on with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Polymer Science A Comprehensive Reference written by and published by Newnes. This book was released on 2012-12-05 with total page 7752 pages. Available in PDF, EPUB and Kindle. Book excerpt: The progress in polymer science is revealed in the chapters of Polymer Science: A Comprehensive Reference, Ten Volume Set. In Volume 1, this is reflected in the improved understanding of the properties of polymers in solution, in bulk and in confined situations such as in thin films. Volume 2 addresses new characterization techniques, such as high resolution optical microscopy, scanning probe microscopy and other procedures for surface and interface characterization. Volume 3 presents the great progress achieved in precise synthetic polymerization techniques for vinyl monomers to control macromolecular architecture: the development of metallocene and post-metallocene catalysis for olefin polymerization, new ionic polymerization procedures, and atom transfer radical polymerization, nitroxide mediated polymerization, and reversible addition-fragmentation chain transfer systems as the most often used controlled/living radical polymerization methods. Volume 4 is devoted to kinetics, mechanisms and applications of ring opening polymerization of heterocyclic monomers and cycloolefins (ROMP), as well as to various less common polymerization techniques. Polycondensation and non-chain polymerizations, including dendrimer synthesis and various "click" procedures, are covered in Volume 5. Volume 6 focuses on several aspects of controlled macromolecular architectures and soft nano-objects including hybrids and bioconjugates. Many of the achievements would have not been possible without new characterization techniques like AFM that allowed direct imaging of single molecules and nano-objects with a precision available only recently. An entirely new aspect in polymer science is based on the combination of bottom-up methods such as polymer synthesis and molecularly programmed self-assembly with top-down structuring such as lithography and surface templating, as presented in Volume 7. It encompasses polymer and nanoparticle assembly in bulk and under confined conditions or influenced by an external field, including thin films, inorganic-organic hybrids, or nanofibers. Volume 8 expands these concepts focusing on applications in advanced technologies, e.g. in electronic industry and centers on combination with top down approach and functional properties like conductivity. Another type of functionality that is of rapidly increasing importance in polymer science is introduced in volume 9. It deals with various aspects of polymers in biology and medicine, including the response of living cells and tissue to the contact with biofunctional particles and surfaces. The last volume is devoted to the scope and potential provided by environmentally benign and green polymers, as well as energy-related polymers. They discuss new technologies needed for a sustainable economy in our world of limited resources. Provides broad and in-depth coverage of all aspects of polymer science from synthesis/polymerization, properties, and characterization methods and techniques to nanostructures, sustainability and energy, and biomedical uses of polymers Provides a definitive source for those entering or researching in this area by integrating the multidisciplinary aspects of the science into one unique, up-to-date reference work Electronic version has complete cross-referencing and multi-media components Volume editors are world experts in their field (including a Nobel Prize winner)

Download or read book Analysis Of The Structure And Properties Of High crosslinked Polymer Networks written by A. A. Askadskii and published by CRC Press. This book was released on 1992 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Polysiloxanes written by James E. Mark and published by Oxford University Press. This book was released on 2015-03-11 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polysiloxanes are the most studied inorganic and semi-inorganic polymers because of their many medical and commercial uses. The Si-O backbone endows polysiloxanes with intriguing properties: the strength of the Si-O bond imparts considerable thermal stability, and the nature of the bonding imparts low surface free energy. Prostheses, artificial organs, objects for facial reconstruction, vitreous substitutes in the eyes, and tubing take advantage of the stability and pliability of polysiloxanes. Artificial skin, contact lenses, and drug delivery systems utilize their high permeability. Such biomedical applications have led to biocompatibility studies on the interactions of polysiloxanes with proteins, and there has been interest in modifying these materials to improve their suitability for general biomedical application. Polysiloxanes examines novel aspects of polysiloxane science and engineering, including properties, work in progress, and important unsolved problems. The volume, with ten comprehensive chapters, examines the history, preparation and analysis, synthesis, characterization, and applications of these polymeric materials.

Download or read book Inorganic Polymers written by James E. Mark and published by Oxford University Press on Demand. This book was released on 2005-04-21 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: I. Introduction 1.1. What Is a Polymer1.2. How Polymers Are Depicted1.3. Reasons for Interest in Organic Polymers1.4. Types of Inorganic Polymers1.5. Special Characteristics of PolymersII. Characterization of Inorganic Polymers 2.1. Molecular Weights2.2. Molecular Weight Distribution2.3. Other Structural Features2.4. Chain Statistics2.5. Solubility Considerations2.6. Crystallinity2.7. Transitions2.8. Spectroscopy2.9. Mechanical PropertiesIII. Polyphosphazenes 3.1. Introduction3.2. History3.3. Alternative Synthesis Routes to Linear Polymers3.4. Surface Reactions of Polyphosphazenes3.5. Hybrid S.

Download or read book Concise Encyclopedia of Composite Materials written by Andreas Mortensen and published by Elsevier. This book was released on 2006-12-08 with total page 1050 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concise Encyclopedia of Composite Materials draws its material from the award-winning Encyclopedia of Materials: Science and Technology, and includes updates and revisions not available in the original set. This customized collection of articles provides a handy reference for materials scientists and engineers with an interest in composite materials made from polymers, metals, ceramics, carbon, biocomposites, nanocomposites, wood, cement, fibers, etc. Brings together articles from the Encyclopedia of Materials: Science & Technology that focus on the essentials of composite materials, including recent updates Every article has been commissioned and written by an internationally recognized expert and provides a concise overview of a particular aspect of the field Enables rapid reference; extensive bibliographies, cross-referencing and indexes guide the user to the most relevant reading in the primary literature Covers areas of active research, such as biomaterials and porous materials

Download or read book Polymers in Regenerative Medicine written by Manuel Monleon Pradas and published by John Wiley & Sons. This book was released on 2015-02-02 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomedical applications of Polymers from Scaffolds toNanostructures The ability of polymers to span wide ranges of mechanicalproperties and morph into desired shapes makes them useful for avariety of applications, including scaffolds, self-assemblingmaterials, and nanomedicines. With an interdisciplinary list ofsubjects and contributors, this book overviews the biomedicalapplications of polymers and focuses on the aspect of regenerativemedicine. Chapters also cover fundamentals, theories, and tools forscientists to apply polymers in the following ways: Matrix protein interactions with synthetic surfaces Methods and materials for cell scaffolds Complex cell-materials microenvironments in bioreactors Polymer therapeutics as nano-sized medicines for tissuerepair Functionalized mesoporous materials for controlleddelivery Nucleic acid delivery nanocarriers Concepts include macro and nano requirements for polymers aswell as future perspectives, trends, and challenges in the field.From self-assembling peptides to self-curing systems, this bookpresents the full therapeutic potential of novel polymeric systemsand topics that are in the leading edge of technology.