Download or read book Structure Property Correlations in Al Li Alloy Integrally Stiffened Extrusions written by Stephen J. Hales and published by DIANE Publishing. This book was released on 2001 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structure property Correlations in Al Li Alloy Intergrally Stiffened Extrusions written by Stephen J. Hales and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structure Property Correlations in Al Li Alloy Integrally Stiffened Extrusions written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-11 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this investigation was to establish the relationship between mechanical property anisotropy, microstructure and crystallographic texture in integrally 'T'-stiffened extruded panels fabricated from the Al-Li alloys 2195, 2098 and 2096. In-plane properties were measured as a function of orientation at two locations in the panels, namely mid-way between (Skin), and directly beneath (Base), the integral 'T' stiffeners. The 2195 extrusion exhibited the best combination of strength and toughness, but was the most anisotropic. The 2098 extrusion exhibited lower strength and comparable toughness, but was more isotropic than 2195. The 2096 extrusion exhibited the lowest strength and poor toughness, but was the most isotropic. All three alloys exhibited highly elongated grain structures and similar location-dependent variations in grain morphology. The textural characteristics comprised a beta + fiber texture, similar to rolled product, in the Skin regions and alpha + fiber texture, comparable to axisymmetric extruded product, in the Base regions. In an attempt to quantitatively correlate texture with yield strength anisotropy, the original 'full constraint' Taylor model and a variant of the 'relaxed constraint' model, explored by Wert et al., were applied to the data. A comparison of the results revealed that the Wert model was consistently more accurate than the Taylor model.Hales, Stephen J. and Hafley, Robert A.Langley Research CenterCORRELATION; MICROSTRUCTURE; MECHANICAL PROPERTIES; CRYSTALLOGRAPHY; ALUMINUM-LITHIUM ALLOYS; ANISOTROPY; EXTRUDING; YIELD STRENGTH
Download or read book Structure Property Correlations in Al Li Alloy Integrally Stiffened Extrusions written by Stephen J. Hales and published by DIANE Publishing. This book was released on 2001 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structure property Correlations in A1 li Alloy Integrally Stiffened Extrusions Nasa written by United States. National Aeronautics and Space Administration and published by . This book was released on 2003* with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Characterization of Al Cu Li Alloy 2090 Near Net Shape Extrusion written by National Aeronautics and Space Adm Nasa and published by . This book was released on 2018-11-05 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminum-lithium (Al-Li) alloys near net shape extrusions are being evaluated for potential application in launch vehicle structures. The objective of this study was to determine tensile and fracture properties, corrosion resistance, and weldability of integrally stiffened panels of Al-Cu-Li alloy 2090 in the T8 temper. The microstructure was pre-dominantly unrecrystallized. Texture analyses revealed the presence of fiber components in the stiffeners and a combination of fiber and rolling components in the skin. Variations in grain morphology and texture through the extruded cross section were correlated with the tensile, fracture, and corrosion behavior. Tensile strengths at room and cryogenic temperatures of the 2090 extrusions were similar to other 2090 product forms and were higher than 2219-T87, the primary structural material in the Space Shuttle external tank; however, ductilities were lower. The fracture resistance of the 2090 extrusion was lower than 2219-T87 plate at room temperature. At cryogenic temperatures, tensile ductility and fracture behavior of the 2090 extrusion were similar to other 2090 product forms but were lower than 2219-T87 plate. The exfoliation and stress corrosion resistance of the 2090 extrusion compared favorably with the characteristics of other 2090 product forms. The weldability and weldment properties of the extrusions were similar to 2090 and 2219 plates. Birt, M. J. and Domack, M. S. and Hafley, R. A. and Pollock, W. D. Langley Research Center...
Download or read book Aluminum Lithium Alloys written by K.V. Jata and published by Elsevier Inc. Chapters. This book was released on 2013-09-20 with total page 35 pages. Available in PDF, EPUB and Kindle. Book excerpt: This chapter describes the development of crystallographic texture and its effects on mechanical properties in aluminum-lithium alloys. Crystallographic texture evolves during the forming of wrought products from cast ingots of Al-Li alloys and consequently affects the mechanical properties. Practical approaches to control the texture have been developed and have been successfully used in the products obtained from industrial-scale ingots. This texture tailoring has significantly reduced the yield strength anisotropy. In addition, theoretical approaches have been used to model the yield strength anisotropy of aluminum alloys in the presence of complex precipitates.
Download or read book Evaluation of Engineering Properties of Al Li Alloy X2096 T8a3 Extrusion Products written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-05-31 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical, thermal fatigue and stress corrosion properties were determined for the two lots of Al-Li X2096-T8A3 extruded beams. Based on the test results, the beams were accepted as the construction material for fabrication of the Hubble Space Telescope new Solar Array Support Structure.Flom, Y. and Viens, M. and Wang, L.Goddard Space Flight CenterALUMINUM-LITHIUM ALLOYS; SPACECRAFT CONSTRUCTION MATERIALS; HUBBLE SPACE TELESCOPE; BEAMS (SUPPORTS); CORROSION TESTS; FATIGUE TESTS; THERMAL CYCLING TESTS; STRESS CORROSION; THERMAL FATIGUE; MECHANICAL PROPERTIES; THERMODYNAMIC PROPERTIES; SOLAR ARRAYS; EXTRUDING
Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on 2003 with total page 882 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Langley Scientific and Technical Information Output 2001 written by and published by . This book was released on 2002 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Characterization of Al Cu Li Alloy 2090 Near Net Shape Extrusion written by M. J. Birt and published by . This book was released on 1998 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Metals Abstracts written by and published by . This book was released on 1998 with total page 1042 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 1042 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structure Property Relations in Nonferrous Metals written by Alan Russell and published by John Wiley & Sons. This book was released on 2005-07-08 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This junior/senior textbook presents fundamental concepts ofstructure property relations and a description of how theseconcpets apply to every metallic element except iron. Part One of the book describes general concepts of crystalstructure, microstructure and related factors on the mechanical,thermal, magnetic and electronic properties of nonferrous metals,intermetallic compounds and metal matrix composites. Part Two discusses all the nonferrous metallic elements from twoperspectives: First it explains how the concepts presented in PartOne define the properties of a particular metallic element and itsalloys. Second is a description of the major engineering uses ofeach metal. This section features sidebar pieces describingparticular physical property oddities, engineering applications andcase studies. An Instructor's Manual presenting detailed solutionsto all the problems in the book is available from the Wileyeditorial department. An Instructor's Manual presenting detailed solutions to all theproblems in the book is available from the Wiley editorialdepartment.
Download or read book Aluminum Lithium Alloys written by N Eswara Prasad and published by Butterworth-Heinemann. This book was released on 2013-09-20 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because lithium is the least dense elemental metal, materials scientists and engineers have been working for decades to develop a commercially viable aluminum-lithium (Al-Li) alloy that would be even lighter and stiffer than other aluminum alloys. The first two generations of Al-Li alloys tended to suffer from several problems, including poor ductility and fracture toughness; unreliable properties, fatigue and fracture resistance; and unreliable corrosion resistance. Now, new third generation Al-Li alloys with significantly reduced lithium content and other improvements are promising a revival for Al-Li applications in modern aircraft and aerospace vehicles. Over the last few years, these newer Al-Li alloys have attracted increasing global interest for widespread applications in the aerospace industry largely because of soaring fuel costs and the development of a new generation of civil and military aircraft. This contributed book, featuring many of the top researchers in the field, is the first up-to-date international reference for Al-Li material research, alloy development, structural design and aerospace systems engineering. Provides a complete treatment of the new generation of low-density AL-Li alloys, including microstructure, mechanical behavoir, processing and applications Covers the history of earlier generation AL-Li alloys, their basic problems, why they were never widely used, and why the new third generation Al-Li alloys could eventually replace not only traditional aluminum alloys but more expensive composite materials Contains two full chapters devoted to applications in the aircraft and aerospace fields, where the lighter, stronger Al-Li alloys mean better performing, more fuel-efficient aircraft
Download or read book Alloys Index written by and published by . This book was released on 1988 with total page 1058 pages. Available in PDF, EPUB and Kindle. Book excerpt:
